Service Order No Ranges Not getting generated Sequentially.

Dear Experts,
Created a Service Order Type ZWS3 and Assigned the No Range (14300001-14400000).
We created an Order on 17.05.2011 with the no 14300062 , the next Order was created on 18.05.2011 with the no 14300053.
Buffering is ok. The New Order nos are sometimes smaller the the earlier orders. Please help.
Regards,
Shareeq

Hi,
With buffering switched on and if you have multiple application servers, each server will maintain its own set of buffered numbers. If server B has the numbers 0060-0069, first order created will be 0060. Server A may have the numbers 0050-0059. Orders created here will therefore have lower number than those from server B.
See note [62077|https://service.sap.com/sap/support/notes/62077] that gives further explination.
-Paul

Similar Messages

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

Planned order not getting generated at plant level

Hi experts,
When i run MRP for a particular plant in T- code (MD01) Planned order is not getting generated but when MRP is done against a material in T - code (MD02) in the same plant planned order gets generated... Is there any customizing to generate planned order in plant level.....
Regards,
Joseph.
Edited by: joseph5885 on Aug 12, 2010 9:23 AM

Dear Joseph,
No it is not recommended. only in emergance cases this will be done
Usually in MDRE and MDAB will be scheduled before MRP run at background for inconistancies in planning file enries
So the above said t-codes will take care of the same
Added
Refer this link
[Planning file entry;
Regards
Madhu
Edited by: K.Madhu Kumar on Aug 12, 2010 6:53 AM

SAP F&R - Order Proposals not getting generated

Hi Experts,
I am currently on SCM 5.0 system. For a location-product on uploading the consumption data, the forecast gets generated but no Order Proposals are getting generated at all. When I look at the Source of Supply, the delivery dates for the location-product are appropriately displayed.
The scenario is basically Vendor -> DC -> Store i.e. V111 -> R601 -> R611 for the product FR11. The time series of supplying location is displayed for FR11-R611 in CADE while FR11-R601 is not displayed. I suppose, this may be, why the OPs are not getting generated. How do we generate time series for FR11-R601 i.e. for V111 (vendor) ?
Also, When i try to run a location status check on R611, /FRE/FU_CL_FRP_SAFOUT_CRIT comes out with a fatal error with the remaining others in an INITIAL state. How do we resolve this issue.
Thanks & Regards
Prashant

Hi,
I was able to solve both the issues with a change in the Forecasting Frequency profiles where the reference day for start week was on "FRP Location Activation Date". I changed it to Calendar date and checked the forecast and it worked with the Order proposals also generating. Also, the location status check out for the mentioned location was in "OK" state.
Also, a second methodology applied to overcome the problem was to go to SAP Menu -> F&R Processor -> Administration, from there go to the location tab where the locations had a deactivation date of 31.12.2009. I extended the date and then there was no need to change the forecasting frequency profiles.
Regards
Prashant
Edited by: Prashant Kedare on Mar 3, 2010 9:38 AM

Billing due list not getting generated

Hi All,
I am trying to create billing due list from service order, but billing due list is not getting generated due to some reason. I have checked in both Maintain and Analyze billing due list, but nowhere I can find the billing due list.
I have set the service order item to billing relvant (E), defined Billing Type, Biling Unit, Billing Item category, Item category Determination.
And this is the first time we are trying to create billing due list in system, so Please let me know if some other activation / configuration needs to be done
Also is their any way by which during creation we can check what has missed. I tried debugging during service order save, but no luck. May be I am not able to reach the point where billing due list creation is triggered.
Thanks,
Naresh

Hi Naresh,
Can you please try to debug in the badi "CRM_UPLOAD_BEA_FILL " after saving the service order.
(May be i think there may be some custom implementations in this badi where it checks some conditions to be met were getting failed which results in not generating of billing due lists).
Thanks & Regards,
Vishnu.

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Task activities not getting generated properly in BPEL

I am using the Jdev 11g TP3 (from OTN). Installation went through fine. However I observed a interesting issue with HumanTask/BPEL and I was wondering if someone faced similar such problems before, if so, how to rectify the issue. Here is the description of the issue:
1. Created a Empty SOA composite project
2. Dragged and dropped BPEL Process in the component palette. Designed a Asynchronous process.
3. Dragged and dropped a HumanTask. Did not expose as an composite. Designed a single approver workflow. In the project schema, choose the schema from BPEL input.
4. Wired BPEL to HumanTAsk
5. In the BPEL flow, I dragged the HumanTask to the flow. Everything appears to be correct. I clicked on "Ok" after associating with BPEL variable.
Now when I examine the BPEL flow, a scope before the BPEL switch is empty. There are no BPEL activities generated. This is a very simple case of BPEL and HumanTask and I am not sure as to why the tasks not getting generated properly in BPEL flow.
Has anyone experienced this issue or any ideas as to why this could happen?

After going through the exercise several times, I finally found out the reason as to why the BPEL activities are not getting generated. In the Human task form for the title, since it is a fixed string in my case I put something like the one given below:
Title : "APPROVE ORDER"
When you have fixed string within double quotes it does not generate BPEL activities correctly. You can try and u will see the problem.
My real question is should not throw proper error message when you try to drag and drop the HumanTask to BPEL flow.

PR not getting generated in MD50

hello,
anybody please help me.
My scenario is make to order for FG & SFG. make to stock for RM & Packing material.
MRP TYPE : PD
For FG & SFG: Individual Requirement
For RM & Packing material: collective requirement.
RM & Packing materil Stratergy group : 10
Avilability Check : 02 (individual check)
My problem is when i doing MRP run by using MD50, Purchase request are not getting generated for RM & Packing material when there is not stock, no po & No PR. in MD04 it showing dependent requirement. again when i am doing MRP run with MD02 pr getting generated. please suggest how to resolve this issue.
my client is asking to generate PR at MD 50 only.
Thanks & Regards
bhakta

MD50 is for sale order planning, system will plan with respect to sale order only - you are considered the RM and packaging as a MTS scenario, then how the system will plan for RM and Packaging in MD50
are you procuring raw material with respect to sale order means
then for RM and packaging, remove the strategy group and maintain individual indicator, then run MRP in MD50, system will plan for RM and pacakaging material also

FI Doc not getting generated at the time of Asset GRN

Hi,
We have created Asset Purchase Order.
At the time of GRN, FI Doc is not getting generated.
What changes need to be required from MM side (in OBYC)
Regards,

HI PK,
whether your PO Item have Single Account Assignment or it is Multiple Account assignment.
Check Distribution in Accoun Assignment Tab at PO item level.
If it is Single account Assignment, then Accounting Document will be generated at GR where if it is Distributed then, no Accounting Document will be generated.
In your case, Probably it would be distributed. and as a result of this your PO Item is marked as 'GR non valuated'.
Check its Delivery Tab. If it is the case, then need not worry as it is std practise. system will treated it as multiple account assignment and its valuation will only be carried out Invoice Verification level.
Later on check the Material document also.
Pls Note:
If flag 'GR non-valuated' is set in the purchase order, the valuation is only executed through the invoice verification. This flag must be set if the purchase order has multiple account assignment.
A valuated goods receipt for a purchase order with account assignment generates a posting line for the consumption account 'Account-assigned purchase order' (KBS) and for the GR/IR clearing account WRX.
hope it address your issue.
Regards,
S Anand

Utl_file not getting generated

hi i wrote one procedure using utl_file , to check the output of the file in a text format and it was created successfully , intially it had problems with directory and i created that directory and even granted permissions using system user but nothing is happening the text file is not getting generated.
CREATE TABLE ITEM (IT_CODE VARCHAR2(12),IT_NAME VARCHAR2(20))
INSERT INTO ITEM VALUES ('A','AAA')
SQL> CREATE DIRECTORY MY_DIR AS 'C:\TEMP'; -- this is the path of my local folder
Directory created.
SQL> GRANT READ ON DIRECTORY MY_DIR TO ORION2007;
Grant succeeded.
SQL> GRANT WRITE ON DIRECTORY MY_DIR TO ORION2007;
Grant succeeded.
CREATE OR REPLACE PROCEDURE it_status
IS
v_filehandle UTL_FILE.file_type;
CURSOR itc
IS
SELECT *
FROM item
ORDER BY it_code;
BEGIN
v_filehandle := UTL_FILE.fopen ('MY_DIR', 'AAAA.TXT', 'w');
--Opening a file utl_file.putf(v_filehandle,'Item file :GENERATED ON %s\n',SYSDATE);
UTL_FILE.new_line (v_filehandle);
FOR v_it_rec IN itc
LOOP
UTL_FILE.putf (v_filehandle,
'Item Details %s are:s\n',
v_it_rec.it_code,
v_it_rec.it_name
END LOOP;
UTL_FILE.put_line (v_filehandle, '***END OF REPORT***');
UTL_FILE.fclose (v_filehandle);
END it_status;
{code}

i tried using get_line but there is a error
SQL> ed
Wrote file afiedt.buf
1 CREATE OR REPLACE PROCEDURE it_status
2 IS
3     v_filehandle   UTL_FILE.file_type;
4     CURSOR itc
5     IS
6        SELECT   *
7            FROM item
8        ORDER BY it_code;
9 v_txt varchar2(1000) := 'aaa.txt';
10 BEGIN
11     v_filehandle := UTL_FILE.fopen ('MY_DIR', 'AAAA.TXT', 'w');
12     --Opening a file          utl_file.putf(v_filehandle,'Item file :GENERATED ON %s\n',SYSDATE);
13     UTL_FILE.new_line (v_filehandle);
14     FOR v_it_rec IN itc
15     LOOP
16     UTL_FILE.GET_LINE(v_filehandle,v_txt,32767);
17     UTL_FILE.FCLOSE(v_filehandle);
18        UTL_FILE.putf (v_filehandle,
19                       'Item Details %s are:s\n',
20                       v_it_rec.it_code,
21                       v_it_rec.it_name
22                      );
23     END LOOP;
24     UTL_FILE.put_line (v_filehandle, '***END OF REPORT***');
25     UTL_FILE.fclose (v_filehandle);
26* END it_status;
SQL> /
Procedure created.
SQL> exec it_status;
BEGIN it_status; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 98
ORA-06512: at "SYS.UTL_FILE", line 656
ORA-06512: at "ORION2007.IT_STATUS", line 16
ORA-06512: at line 1

I was told by comcast that we had a computer in the house with a malware virus, they even said that they were going to terminate our service if we did not get it fixed. Now this week we hear that there is a trojan malware virus, how do we get rid of it?

I was told by comcast that we had a computer in the house with a malware virus, they even said that they were going to terminate our service if we did not get it fixed. Now this week we hear that there is a trojan malware virus, how do we get rid of it?

Hello,
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
Check now whether your Mac is infected by Backdoor.Flashback.39!
http://public.dev.drweb.com/april/

Accounting document not getting generated

Hi
While doing invoice , G/L account is getting determined but accounting document is not getting generated. In the header data its giving a error " Error in accounting interface". What could be the possible reason ?

Hi,
Kindly check in VOFA, for the billing document, have you maintained any value for Document Type.
This is nothing but your accounting document type, where accounting entries are generated. Also, check number range is maintained or not for the given accounting document type in OBA7. Number range is created in FBN1
One more thing, remove check box of Posting Block in VOFA
Hope this will work out
Regards,
Sagar

Nohup.log files are not getting generated correctly

hai,
im a weblogic administrator. Here is my problem in weblogic. My partner has complained that nohup.logs are not getting generated properly. Like for every 5 mins a new nohup .log file is getting generated. But almost 4 to 5 logs are of 0 size and after that the 6 log file is very hug ( around MB). And the status of the managed servers is in FAILED state. When i checked the nohup logs, i can see "E297: Write Error In Swap File" and also the below error. But when i checked the disk space it is only 30 % full. Please suggest me something that can help me in this. Why is this behavior in the nohup.logs? have anyone faced anythign like this? Please help me.
But after the recycle everything is fine. But i want to know what went wrong and why it got recovered after the recycle.
<Feb 11, 2010 7:43:59 AM CST> <Error> <HTTP> <BEA-101246> <Error occurred while flushing HTTP log file for the Web server: wl38_managed1
java.io.IOException: Disk quota exceeded.
java.io.IOException: Disk quota exceeded
at java.io.FileOutputStream.writeBytes([BII)V(FileOutputStream.java:???)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at com.wily.introscope.agent.probe.io.ManagedFileOutputStream.write(ManagedFileOutputStream.java:423)
at weblogic.utils.io.DoubleBufferedOutputStream.flushBuffer(DoubleBufferedOutputStream.java:58)
at weblogic.utils.io.DoubleBufferedOutputStream.flush(DoubleBufferedOutputStream.java:157)
at weblogic.servlet.logging.LogManagerHttp$FlushLogStreamTrigger.trigger(LogManagerHttp.java:522)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:50)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

according to error message, your partition size have not enough disk space from where you are running nohup command. check with df -kh.

CO-PA document not getting generated

Hi,
while sales billing CO-PA profitability document is not getting generated. I have checked the configuration. In
KE4I the condition type (with account key ERL) has assigned to the value field ERLOS.In PA transfer structure
we have maintained the assignments - source and value fields, here included the sales revenue GL which has the
cost element category 11.
In the sales order we have account assignment with real WBS object. Is this hinders the profitability document
getting generated?
while VF01 system is not generating the profitability document but accounting and controlling document
is getting generated.
Is it mandatory to mention the Business area in KEDR derivation?
Requesting a early feedback.

Hi Mel,
Since WBS is assigned to the order item, both revenue and cost will be collected in WBS if the WBS is marked as 'billing element'. Check the WBS master to confirm this.
The COPA document will be generated when the WBS is settled after RA run.
Otherwise, check in KE4W, if COPA value flow has been reset for your billing type.
BR
Abhinav

Reports file did not get generated during upgrade from 12.1.1 to 12.1.3

Hi,
Following is my setup:
Two node Rac database on Linux 5(64-bit)
All apps services are on single node - Linux 5(32-bit)
Database version -- 10.2.0.5
Apps version -- 12.1.1
To upgrade apps from 12.1.1 to 12.1.3 i applied following patches.
a.Merged patch 9239090, 9239095 and applled the merge driver, during the patch application i got the following error:
Copying files to destination ...
Done copying files to destination.
The following Oracle Reports objects did not generate successfully:
ja reports/US JAINMCEN.rdf
An error occurred while generating Oracle Reports files.
Continue as if it were successful [No] :
== I did 'Yes' and patch applied successfully then as a post step i Merged Patch 9817770, 9966055 and apply the merge driver.
Now i wanted to regenerate that particular rdf file, but its not getting generated even with adadmin. Not sure will the rdf file causes issue later so i wanted to fix this.
Please advice...
Thanks,
Tanveer Mohammed

Hi;
I did 'Yes' and patch applied successfully then as a post step i Merged Patch 9817770, 9966055 and apply the merge driver.
Now i wanted to regenerate that particular rdf file, but its not getting generated even with adadmin. Not sure will the rdf file causes issue later so i wanted to fix this.I belive you regenarete rdf and u dont have any issue than you can ignore this error. If you dont generate rdf than i suggest regenarete and if you have any issue update thread please
Regard
Helios

Service Order No Ranges Not getting generated Sequentially.

Similar Messages

Maybe you are looking for