Service order with TAW or TAX

hi friend !!!!
we can use TAX item catogory also other than TAW
but i observed one thing when i create service order with both material (service and trading ) and create their delivery and invoice in document flow of order system can't show the PGI MATERIAL DOCUMENT for trading good and show only service confirmation document
my question is if trading good is normal item and inventory is updated
then system should show that material document
please explain
thanks
b

the material that i had send is an non valuated material.
regards
SAGAR

Similar Messages

  • Service order with spare item -Purchase requistin is not getting created

    Hi
    I am working on service order management with external resource procurrment scenario.I have created the service order with spare part item.Expected behaviour is Purchase requistion should created automatically &  have mantained all settings properly.
    I am facing the following issues for the service order.
    No instance of object type Purchase Requisition has been created. External reference: (Notification E BAPI 001)
    Enter G/L Account Number (Notification E ME 083).
    Please suggest me which settings i need to maintained to resolve the above issues.
    Thanks for your help in advance.
    Thanks & Regards,
    Silpa.T

    Hi,
    You need to maintain the logistic seetings Transactions>>Settings for Service>>Integration>> Logistic Integration>>Define Logistic Scenario for Service Material.
    There you need to maintain a Purchase Requistion document type for item category. Hope this will resolve the error.
    Thanks
    Monika

  • How to fetch service order with partucular system status and user status

    Hello All,
    How to fetch service orders with specific system status and user status.
    thanks

    I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
    I want to fetch released service orders with status INIT and RENT.
    Here, SYSTEM Status = Released and
             USER Status     = INIT
                                        RENT
    So is there any function module available for the same.....

  • Service Order with Notification

    Hi
    Iam creating service order with notification  in PM Module using BAPI
    BAPI_ALM_ORDER_MAINTAIN .
    But only order has created with this. I gave notification no in header table. Then also it is not creating. Any one can update on this?
    Thanks & Regards
    GVRao

    As stated above, its done through the Transfer of Requirements settings in the SD IMG
    As an example lets look at the standard repair order - the links are:
    Sales document item category IRRP
    - Item Cat IRRP is linked to Requirements Type SERP (SD IMG->Determination Of Requirement Types Using Transaction)
    -- Requirements Type SERP is linked to Requirements Class 204 (SD IMG->Define Requirements Types)
    --- Requirements Class 204 is lined to order type SM03 (SD IMG->Define Requirements Classes)
    PeteA

  • Function module for Create service order with reference to sales doc (RAS )

    Hi All,
    I have to create a service order (type SM03) with reference to sales document (doc type RAS, in other way it is called as repair order).
    I have used function module 'ALM_ME_ORDER_CREATE' && 'CO_ZV_ORDER_POST' to create service order and its working fine but problem is that i am not able to create linking between repair order and service order.
    Can anyone suggest me function module, BAPI to create service order with reference as sales document (RAS) so that all related details of sales document will automatically reflect to service order..
    Sumit

    Try this function module BAPI_ORDER_MAINTAIN. Just search with BAPI_ORDER* in SE37 you will get some more functions.
    Regards
    Kathirvel

  • Created Service Order with out contract

    Hi
    I have created Service Order  without contract. Now I have been asked to change it to a Service Order with contract, . Is it possible for me to change the existing SO - or do I have to create a new one??? If possible please explain the steps.
    Regards,
    Rahul

    Hi,
    You have two options :
    1- You can delete your SO and create a service rquisition and reference a contract OR..... with you PR ceate a Service Order.
    2 You can delete your SO and create a SO and reference a contract.
    I guess you want all conditions from your contract to pull through into you SO.
    Thanks

  • Calculation of planned costs in CS service order with 1 day = 8 hours

    Dear experts!
    What kind of possibilities do I have to calculate the planned costs in the CS service order (IW31) on the basis 1 day = 8 hours.
    Right now, when I create the operation with "amount of work" = 5 days, the system calculates 120 hours * x u20AC. My requirement would be, that the system calculates 40 hours * x u20AC.
    Do I have to change settings in transaction CUNI or can I use the work center to solve my problem? Or any other idea?  
    Kind regards,
    Jens
    Edited by: Jens Neßlage on Oct 28, 2009 6:28 PM

    Jens,
       You should be able to use the work center to solve this problem.Check the working hours in the operation work center and make sure its set to 8 hrs.This should solve your problem.
    Regards
    Narasimhan

  • Service order with blank short text

    Hi all,
    In my case Service orders are getting generated from sales order and the short text of the service order is the material description in the sales order line item.This is the standard behaviour.
    Now the client wants short text should be blank and they will key in the text later.Means order has be created with no data in short text.
    I have tested with exit IWO10009 and its not catering my needs.Is there is any other exit which whips the data in the shorttext while saving of the order.
    reagards
    A.Sureshbabu.

    MODERATOR COMMENT:
    Welcome to the forum. Do take time to read the [rules|https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement], in particular:
    Step 4: Thank Others by Giving Points
    -Paul
    Moderator

  • Service Order with reference to sales order

    Hi all,
    My client is selling finish material and services to finish material my client requirement is Once we save the sales order, line item with service material system should generate Service order for serves which we are selling to customer
    can any one guide me how to configure in SAP the movement we sales order system should generate the Service order
    Thanks
    Ram

    Hi Ram
    Say your finish material sales order is ZFIN and service order is ZSER.
    Create a BDC program to create ZSER type sales order.(Take help of ABAPer).
    Create new output type ZCRE. Assign this BDC program to ZCRE output type, such that when ZCRE triggers ZSER sales order creates.
    Now assign ZCRE output type to ZFIN sales order type.
    So conclusion, when you save ZFIN sales order, automatically ZCRE output type will trigger.
    ZCRE internally calls VA01 for ZSER sales order. So ZSER get created when you save ZFIN.
    try and revert

  • Creation of service order with address data.

    Hello community,
    I have the following requirement: create maintenance orders with order address data, the creation of these orders will be triggered by an interface with a legacy system.
    For order creation I intend to use BAPI_ALM_ORDER_MAINTAIN but this function does not provide the possibility to enter address information.
    I would not like to have to create a partner and assign it to the order as this address will be used only once.
    Does anyone have suggestions how to do it ?.
    Thanks.
    Roberto.

    Roberto,
    Try this:
    *& Report  ZPJA_ADDR_TX
    report  zpja_addr_tx.
    data: lt_adrc  type  standard table of adrc with header line.
    data: lt_adrc1 type  standard table of addr1_data with header line.
    * get address from first object
    call function 'ADDR_SELECT_ADRC_SINGLE'
      exporting
        addrnumber        = '0000033071'
      tables
        et_adrc           = lt_adrc
      exceptions
        address_not_exist = 1
        parameter_error   = 2
        internal_error    = 3
        others            = 4.
    loop at lt_adrc.
      move-corresponding lt_adrc to lt_adrc1.
      lt_adrc1-name1 = sy-timlo.   " write current time for testing
      append lt_adrc1.
    endloop.
    * update second address
    call function 'ADDR_UPDATE'
      exporting
        address_data        = lt_adrc1
        address_number      = '0000033205'
        date_from           = '00010101'
        language            = sy-langu
        check_empty_address = ' '
        check_address       = ' '
      exceptions
        address_not_exist   = 1
        parameter_error     = 2
        version_not_exist   = 3
        internal_error      = 4
        others              = 5.
    call function 'ADDR_MEMORY_SAVE'.

  • Linkage of service order with stock transfer order

    We are creating a service order for freight rate against a vendor xxx. While creating STO we assign vendor as CR (role) forwarding agent. Can we link that pricing condition of freight should pick rate directly from the ervice

    Hi,
    In service order components tab....make the item category as N-Non-stock item...
    once u save the order ,system will generate the PR ,w.r.to that create STO.
    maintain PIR ...so that system will pick value.
    Regards
    raj

  • Print smartforms for service order with printer, not a spool in CRM WebUI

    Dear Experts!
    We have a long list of different print forms for a service order. We would love to have a list of these forms appearing when clicking on "Print" button to choose from.
    We have made appropriate settings in SPRO (CRM -> Basic Functions -> Actions -> Actions in Transaction -> Change Actions and Conditions -> Define Action Profiles and Actions & Define Conditions). Option "Print Immediately" is set, and the Output Device is set to local printer. So now we have the following results:
    - When clicking "Print Preview", a window appears where one of the possible forms may be selected to be shown as PDF.
    - When clicking "Print", one of the forms is being moved to spool. So, you may only enter the spool in GUI and send the document to printer.
    There is only one help topic about printing, that says:
    Prerequisites
    Actions are displayed on the Print pushbutton if the following criteria are met:
    -The print action is set as relevant for the toolbar
    - A print smart form is defined as the processing type
    - The action is set to Execute immediately
    - The action is inactive, that is, it is set to be executed manually
    Please, give us a hint on how to make customizing to send document right to the printer.

    Hi Alex,
    This Business Add-In (PRINTER_DETERM_PPF) is used in the Actions (CRM-BF-ACI) component. It enables you to determine a printer more flexibly than the standard Customizing activity allows you to. For example, if you want to print an e-mail confirmation from a local printer in your office, and not from the usual printer for your entire department, you can use this add-in to do so.
    Get back to me for a more info.
    Hope this helps.
    Cheers, Satish

  • Service order with a individual purchase order, Should keep stock?

    Dear all,
        We have the some problem in my project. My project requirement have the service order which is created to order the Architect consults to build a customer's home or measure the customer's house area, However the business keys are provide the external vendor to do it instead. that means the service order have to automatically create the purchase requisition to prepare to create the purchase order of service in the further step.
    Our questions are below:
    1. Should the service material have a stock or not?
    2. Can we use the individual requirement such as 039 (Service item) form the standard SAP to provide this process and configure the schedule line cat to create purchase requisition of service?
    Thank you.
    PP H.

    Hi,
    You need to maintain the logistic seetings Transactions>>Settings for Service>>Integration>> Logistic Integration>>Define Logistic Scenario for Service Material.
    There you need to maintain a Purchase Requistion document type for item category. Hope this will resolve the error.
    Thanks
    Monika

  • Service order with a individual purchase order

    Dear all,
        I have the problem in my project. My requirement project have the service order which is created to order the Architect consults to build home or measure the house area

    Hi,
    You need to maintain the logistic seetings Transactions>>Settings for Service>>Integration>> Logistic Integration>>Define Logistic Scenario for Service Material.
    There you need to maintain a Purchase Requistion document type for item category. Hope this will resolve the error.
    Thanks
    Monika

  • Service order with ref to PR

    hi,
    we have activated PR mandetory for PO.
    here for service PO i am facing some problem, please help.
    if the service PR is having one main line item and 3 sub line item, while copying the same to PO, it will copy, and along with this 3 sub line items, i can add multiple sub line items, which is agains principle pr mandetory for po and po qty should not exceed the PR qty.
    how the same can be controlled.
    at the same time while copying the PR for creating the PO, the account assignment tab at item level gets grey, that means, i cant change the account asignments at item level.(order, asset , cost centre...etc)

    Hi,
    Try this, it may help you -
    config Materials Management:>Purchasing>External Services Management-->Define Screen Layout
    Tough this is to identify which field selection group you need to configure....May need trial and error....
    Regards

Maybe you are looking for