Service PO completion

there is z report, which show the list of PO which is completed or not means delivery completed. in this report its written that if delivery completion is checked show the PO details.
but my problem is that in this service po is not showing because there is not any delivery completion indicator, then how i will show that service po is completed or not. Plz tell me any solution........

Hi,
Check Field Selection Key for SERVICE PO Document type!
Now Make "Delivery completed" indicator is "Opt.entry" in GR/IR control segment for Field Selection Key PT9F( OR your Field Selection Key you are using for Frame work order document type) in following path:
SPRO-> MM--> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
Now assign Field Selection Key PT9F for SERVICE PO Document type & save.
Go for cycle service PO, SES & MIRO and can view Delivery completion indicator
For more check the SAP Note 735404
Regards,
Biju K

Similar Messages

Service Order completion and Gantt diagram

Hello expert,
In resource planning, when a service order is completed (with status "Completed"), the resource assignement in Gantt chart deseppear.
I want that this assignement still displayed in the Gantt diagram and to change only the color when the service is completed.
Do you know if there is some customizing to do it or it's not possible using standard settings.
(I am working in SAP CRM 6.0).
Thank you in advance for your help.
Sami.

Hello expert,
In resource planning, when a service order is completed (with status "Completed"), the resource assignement in Gantt chart deseppear.
I want that this assignement still displayed in the Gantt diagram and to change only the color when the service is completed.
Do you know if there is some customizing to do it or it's not possible using standard settings.
(I am working in SAP CRM 6.0).
Thank you in advance for your help.
Sami.

Continuous "The Software Protection service has completed licensing status check" messages

I have one client machine that gets these messages about 5 separate times when launching a Office 2010 application.
Event ID: 1003 The Software Protection service has completed licensing status check.
From what I've seen this relates to a KMS server activation. We do not use a KMS server, and have a valid MAK activation code that is used throughout the organization. It is valid and I've even used the Volume Activation Management Tool to reinstall the key
to the computer and make sure it is activated. I've also done a repair of office and had no luck. Any ideas?

Hi
Check if ospp service is on or off.
Win+Run --> services.msc --> (scroll down and locate OSPP service)
ref: http://answers.microsoft.com/en-us/office/forum/officeversion_other-office_install/office-2010-multiple-event-id-1003/89ff02f8-8160-4e71-974f-9557bdd94cd8?page=2
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT4009 When I click "buy" button a message comes out: Your purcharse could not be completed Get in contact with iTunes Store support service to complete this transicion

When I BUY an in-app item for a game, a message appears after i click "buy" Your purchrse could not be completed Contact with iTunes support service to complete this purcharse. Please help me on how to complete my purcharse.

If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Why I can't buy thing from my game after updating my billing information as iut ask me to contact I tune service to complete the transaction ? Help!

Why I can't buy thing from my game after updating my billing information as iut ask me to contact I tune service to complete the transaction ? Help!

Go here:
https://expresslane.apple.com/Issues.action
Ask for assistance.

Digusted with the lack of Customer Service and Complete disregard for Inconveniences

Its a shame I have to come here in order for my voice to be heard. I have spent many hours on the phone with technical support and customer service and it has been to no avail. As a longstanding verizon wireless customer I assumed the high level of customer service experienced there would be translated when I decided to pay MORE money and switch from DirectTV to Verizon FIOS. The last few days have proven me wrong as I still remain without internet, tv, or phone service due to a technical issue beyond my fault. I spent an hour on the phone yesterday only to find out a technician would need to be scheduled and sent to my home today. Working in sales, I have reports I must complete each day requiring use of a WIFI connection so this was already becoming an inconvenience on top of the fact I had to be available between 8-12 and miss a half day of work. Not only did the technician never show up but lied in the notes and stated he/she made an attempt to reach me by phone. My call log shows no incoming phone calls during anytime between 8-12 today. When I called tech support to check on the status of when they would be getting someone back out they informed me I would have to wait until tomorrow afternoon before someone could come out. I expressed my extreme displeasure with having to miss more time from work (which is additional money lost) and inconvienece as I would have to move my day around to find a place with free WIFI after work hours to complete my reports. Traffic in DC is not friendly and this has completely turned me off. Veriozn FIOS is unreliable and the level of service I have received to date has been sub par to put it politely. Offering me 2 pro-rated days back on my service doesn't even begin to compensate for the missed time out of work nor the gas and inconvience of running to the nearest free WIFI so I am able to do work required of me. I decided to switch to FIOS because of the verizon name assuming the quality of the product and level of service would be one I could depend on. This has been the farthest thing from what has taken place. I now have another appointment tomorrow and quite unsure if anything at all will happen. I need some somebody from corporate to receive this message as it took me forever to find this forum to express myself and try to come to some resolve to make things right in this situation. None of your customer service reps possessed any information on how to contact corporate and due to my experience I can see why. You all would likely have to hire full time stafff to accomodate the level of complaints coming in. Pending how this situation is resolved, I may or may not take my story to social media and as many review and blog sites as possible. Verizon FIOS has ruined my day and I hope that someone will care enough to make this situation right.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

When trying to make an in app purchase i get a message to contact itunes customer service to complete this transaction

Contacted itunes customer service on the phone (waste). They told me to use the fast lane on line. Any ideas how to fix whatever my problem is.

Not sure if I replyed in the right place so Im replying right to you
When I called they said I have to email tech support and will get help with in 48 hours then sent me a link to what they call Express lane which i guess is tech support. The problem Im having is the in app purchase Im trying to make is a 20% OFF deal and a limitted item for today only

Do I need CDMA service to complete the iOS 5.0 Update?

I'm deployed right now and I use my Verizon iPhone over wifi to skype and facetime with my family at home. I want to update this phone to the new iOS 5.0 software but I'm worried I might not be able to use my phone because i'm not in a service area. Since the Verizon iPhone doesn't have a SIM card, I'm under the assumption that the data is saved somewhere on the phone. If I were to do a restore, do I need to re-activate my phone or anything? There's absolutely no service here so I don't want to attempt the update and get myself locked out of my phone. Anyone know anything that can help me out? Thanks in advance!

I have the exact some thing happening to me.

Windows Embedded Standard 7 TCP/IP Services not completely started before user application loads

WES7 is set to autologon a user and launch a startup batch that launches my application. My application, through a series of LEDs, notifies the user when the system
is initialized and ready to go. What I've noticed is that even though the system is "up and running" TCP/IP services are not initialized yet. For example, RDP Server won't respond as well as ICMP/ping and FTP services. Sometime
later, maybe 20-30 seconds Windows TCP/IP services come alive and everything is okay. Once other thing to note is that I am using BIT Locker and when I turn it off, TCP/IP services, a majority of the time, are alive immediately at or around autologon.
My guess is that there is some contention when Windows is logging and starting services and the behavior for which services are started when is not always deterministic. Is there a way to guarantee TCP/IP services starting before other services?
I’ve messed around with several services in service manager but none seemed to fix the problem. One other item to note. I was able to issue a ping as my first command in my startup script to a fixed IP which appears to force TCP/IP services
to initialize. The problem with this “hack” is that I don't know any host IP addresses until my system has fully started. Plugging in the loopback address in the script or my own external IP did not work.
Thanks,
Joe

I forgot this is getting trickier to track this for WES7. There was this method in C#:
http://stackoverflow.com/questions/10855290/which-windows-service-ensures-network-connectivity
Workstation Service or DHCP Service might be good enough. Firewall should be late enough that the network
Of course there are other methods like doing a ping until a an address returns:
http://serverfault.com/questions/612237/how-to-wait-for-network-in-a-batch-script-when-booting-on-windows-server
Other implementations:
https://social.technet.microsoft.com/Forums/windows/en-US/393e6042-dea0-4285-9aeb-2ddf50434f6b/windows-7-always-wait-for-the-network-at-computer-startup-and-logon-group-policy?forum=w7itpronetworking
http://superuser.com/questions/262799/how-to-launch-a-command-on-network-connection-disconnection/262880#262880
I have never tried this one since it is more for domains:
Go to Start -> type in "gpedit.msc" in the run/search field.
In the Local Group Policy Editor that pops up, go to "Computer Configuration" -> "Administrative Templates" -> "System" -> "Logon" -> "Always wait for the network at computer startup and logon"
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Service repair completed: what order to bring up to date?

Hello,
I recently had my logic board, RAM and superdriver replaced and restoration of OS software. I was at 10.4.6, now I am at 10.4.2. I still have to install ilife 06 and I have not ran any software updates yet. I am not sure on how to bring my computer back up to date. I do have a backup on an external drive of 10.4.6.
but software update is giving me MAC OSX Update combined 10.4.7. So do I install my ilife 06 software first then do updates or vice versa?
Thanks for your response..
PowerPC G4 1.67GHZ, 1GB DDR SDRAM Mac OS X (10.4.6)

Run Software Update, install everything that shows up, repeat until nothing else shows up, then reinstall iLife package. See http://www.macmaps.com/upgradefaq.html and http://www.thexlab.com/faqs/installswupdates.html for details.
G4 450 MP Gigabit Mac OS X (10.4.7)

NB205 - very poor product and service, do not buy Toshiba!! Completely dead in 6 months

I am posting this to warn as many people as possible to avoid buying Toshiba in the future. Not only was the product faulty, which I can understand sometimes happens w mass production. But the service was completely unacceptable, which was the deciding factor for me.
1. My new Netbook NB-205/BL started intermittently shutting down for no reason (complete black screen, not even to blue screen). By the time I returned home from my trip it had stopped working altogether. The power light will come on, and the fan/hard disk will try to spin for a split second and then go silent and stop completely.
2. Upon calling tech support who walked me through a bunch of diagnostic attempts (removing and re-inserting battery, etc.), they concluded it was dead and I needed to send it in.
3. The only thing I really care about is my data as I had stored a bunch of invaluable photos and downloaded about $200 worth of Amazon MP3s since receiving the Toshiba NB205.
4. Tech support assured me they would back up the hard drive for me and ship either a fixed or new computer with all my data still intact. They asked me to register it w their warranty department and call them back so they could send me a shipping box to send it back in. I did all that and it's been >3 weeks and no box.
5. So today I called Tech Support again and the guy goes "Oh yes, you have shipped your computer in for a hard drive failure?". At which point I had to explain how A) it's not a hard drive failure B) I haven't shipped anything anywhere because I never got the box I was promised.
6. Then I proceed to ask him again if my data would be safe, to which he informs me it's Toshiba policy/practice not to back up data for customers. I found this to be unacceptable and then I didn't know who to trust so I asked for a supervisor.
7. This supervisor wasn't able to help me either as he further informed me that they will not back anything up for me AND that I had to pay for shipping AND pay an authorized Toshiba Repair Center to back my hard drive up.
8. I suggested what everyone who I've talked to has said: Toshiba could send me a new computer since they've diagnosed the old one as being dead. I could swap out the hard drives, or they could send me one without a hard drive. And I could send them back the dead NB205.
9. NO was the answer. Toshiba wouldn't do anything for me, because software issues are NOT under warranty. And backing up my hard drive is considered to be a software issue. I repeatedly told him that it's their defective hardware that is causing the need for data backup. But this went ignored and I was told they don't cover anything in this case.
I either had to lose my data or pay probably $100 for a Toshiba dealer to back up my data for me. Oh yeah, and there isn't one of those within 20 miles of me and I live in Silicon Valley!! Oh yes, and they want me to pay to ship them the dead computer.
10. I finally asked him how he would feel if he was the customer, and if he felt this was any way to treat Toshiba customers. He replied by saying they have a process, and this is the process!
Well the next time I and any of you are in our "process" of deciding which brand of technology to buy, I'm certainly not going to consider Toshiba anymore. This is the second chance I'm giving Toshiba after having a very poor laptop AND service experience in 2000. Well, it took me 9 years to give them another shot, and I'm never going to trust them again. I told myself "well, it's a high quality Japanese brand, one that commands a premium in price that people are willing to pay so it should be an excellent product. AND if things do go pooryly, Toshiba will stand behind their name."
I was SO wrong!!! Let this be a message to all people out there, as I did read these forums before buying my product, but the NB205 was so new it didn't have many posts.
Fool me once, shame on you. Fool me twice, shame on me! I'm done with you Toshiba, it's really too bad that you will not honor your brand with fair treatment of your customers.
Ming Wu

It isn't that difficult to back up the data from the hard drive. You can easily do it yourself for about $20. http://www.datarecoverytutorial.com/recover-data-from-failed-laptop-notebook/
As for Toshiba backing up your data, ALL of the manufacturer's have that same policy. NONE of them will backup the data for you nor will they guarantee that your system will be returned with the existing data intact. This is spelled out in the Warranty documents and is fairly common knowledge amongst most computer users.
If the data was that important you should have been backing it up to USB flash drives, a usb external hard drive, or some other backup device on a daily basis just for this very reason. The fact that you failed to do so doesn't make it Toshiba's problem.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Service/maintenance order type SM03 not completely maintained in plant 1000

Dear experts,
when I use T-code:iw31 create a service order,It show the following error message:
Service/maintenance order type SM03 not completely maintained in plant 1000
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Best regards,
Lance

Hello,
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
Maintain the order type SM03 against the plant.
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
These both should be done, try to raise the SM03 order now.
PRase

Service/Maintenace Order type ZMSO not completely maintained for plant SE50

Hi All,
Am trying to create a Service Order with T.Code IW31 and after entering the order type, priority, Llyods code, Plant and Bus.Area and press enter I got error " Service/Maintenace Order type ZMSO not completely maintained for plant SE50 "
Diagnosis:
For the selected order type and plant, no check control is maintained in
Plant Maintenance/Service in 'Availability Check for Materials, PRTs and
Capacities'.
Procedure
A check control must be maintained for this combination of order type
and plant.
Please suggest me what should I do in this case as my knowledge in CS is zero.
Awaiting your replies,
Thanks in advance,
Regards,
Anil.

Hi Anilku,
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
Maintain the order type ZMSO against the plant.
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
Thanks,
Swamy H P

Service order confirmation/completion

Hi,
Can anyone tell me what exactly is meant by service order completion ( flag order) and confirm ( IW41). At what state of the business process do I need it.
To my understanding a service order is complete after billing and confirmed once customer approves.
Please throw a light on this.
Thanks
Sam

Hi ASHIsh,
We do not have the customer service module or the service management but we have the confirmation of service in the document flow. The flow is as follows. standard order ( OR ) - > delivery ( LF ) - > Handling unit - > Confirmationof service. I checked the document flow table VBFA and I see that these confirmation of service is for items which are of item category TAP ( sales BOM header ). That is what I concluded that it shows up for TAP since this item is not pickable ane hence not packable. And we have this come up for all the sales BOM deliveries where there is an item category of TAP for sales BOM header. Still if any one can please throw some light on this that would be greatly appreciated.
Service Order:Short-term agreement between service provider and service recipient, in which one-time services are ordered by the service recipient and resource-related billing performed upon completion.
The service order is used to document service and customer service work. In particular, you can use the service order to:
Plan services specifically with regard to usage of material, utilities and personnel
Monitor the execution of services
Enter and settle the costs which arise from the services
The data for the service order is entered in the history and is important for evaluations and future planning.
You can also create a one-time customer in the order and transfer the data, for example, to the sales order.
A service order contains operations that describe the individual work steps. An operation can be divided into sub-operations for greater detail.
Spare materials and utilities, which are required for service work, can be planned in the operation.
T.Code: [IW41]
Path: Logistics -> Customer Service -> Service Processing -> Confirmation -> Entry -> Individual Confirmation.
After a service order is entered in the system, a service activity would be carried out for the customer. Using this option we would enter the person who carried out the activity, the time taken, the material used with their quantity. Further a billing request would be raised based on these details.
Reward points if iit helpful
Cheers,
Govind.

Based on the years of completion of the service the Incentive should change

Hi Experts,
I am in the implementation and BBP preparation phase.
I have in wage type for employees
Incentive
The requirement from business side is , based on the years of completion of the employee the Incentive should change automatically.
For Exm
1) Till 1- 5 years , Incentive = 1800
2) From 6-7 years of completion of service , Incentive = 2000
3) From 8-10 years of completion of service ,Incentive= 2200
How to map this in SAP? u2013 this wage type needs to be changed based on years of service employee completes into the organization
Your help will be highly appreciated.
Thanks
Jay

Jaya
We have two ways to achieve this scenario
1.Going with PCR where we Query No of Years Completed
2. Going for Custom Function
In the above two ways we have to maintain the year of completion in Date Specification Either Manually or Thorugh Dynamic Action which shd automaticallly update....IT00041
I prefer the second one since PCR is some wht complicated

Service PO completion

Similar Messages

Maybe you are looking for