Service Purchase Order will create GR/IR

Hi,
This is with referece to creating Service purchase order.
I Created Service Purchase order but when i am doing GR/IR MIGO and Invoice Verification MIRO.it is not allowing me.my question is for Service Purchase order whether we can do GR/IR and also MIRO Transactions.
It will be help ful if you can send some configuration steps.
Thanks
Micheal

Hi,
I Know the meaning of consignment.
Please can you help on the following.
1.Whether the Purchase orders with consignment is treated different with normal purchase orders.
2.What is the process of creating Puchase orders with the consignment..
3.Whether It will have GR/IR.
4.Please can you provide the Configuration steps in creating Consignment PO.
Thanks
Micheal

Similar Messages

Will Service Purchase Order will create GR/IR ?

Hi,
This is with referece to creating Service purchase order.
I Created Service Purchase order but when i am doing GR/IR MIGO and Invoice Verification MIRO.it is not allowing me.my question is for Service Purchase order whether we can do GR/IR and also MIRO Transactions.
It will be help ful if you can send some configuration steps.
Thanks
Micheal

Hi,
If you are using item category B then you are not using Service Purchase orders.
Service POs use item category D and are quite different to "normal" POs that is why everyone has been getting confused by your problem.
What you are doing is using normal purchase orders but usinf them for ordering services (with a limit on the value, i.e. item category B).
So let us get this straight first. You are using normal purchase orders with item category B.
If you want to control the GR flags then this is done by configuring the Account assignment categories, using the config transaction (Not by document type, this controls which fields are visble or changeable).
The path to the config is MM > Purchasing > Account assignment > Maintain account assignment categories.
So it all depends on which account assignment category you use and all are available for your "service" POs (except blank) and non-service POs.
I hope this clarifies the issue.
Steve B

To create service purchase order by giving material code

hii
experts
can i create service purchase order by giving material code in service po.generally when i give material code in service purchase order the system doesnt accept it.is there any other way where i can create po for service material but my condition is that i should give material code.experts do u have any valuable inputs.
warm regards
thanks
subhash kulkarni

Hi
Will you please let me know scenarion under which you want to create service PO with material code?
Service PO is raised with item category D and account assignment ( K, P etc) which does not permit to assign any material code, only description of service is mentioned at header and details of service is entered at item level. If service code is created in AC03, enter it at item level, all details mentioned in service master will be fetched else you will have to mention details of services manually.
creation of service code is not mandatory and also not much useful. it helps in reporting and automatic GL determination which can be mapped with the help of material group.
Hope, it must have enlighten some knowledge.
Regards
Susheel

Copy a service P.O. to create a new service purchase order

I want to create a new service purchase order with items category D. However when I give ref. of some another purchase order the vendor and org. data fields become grey. How do I change these fields in new purchase order which I want to create? In case of material P.O. these fields are editable.
Pl. help.
Regards.

Dear,
Please check at the time of Service order creation the document type of purchase order is for services. If no please first change document type in ME21N select document type for service po then enter reference of document number in field of purchase order and it's line item at item detail level.
So please compare your process of purchase order creation with below detail.
Enter ME21N -Select document type for po.
Then enter purchase order number in field of reference purchase order field. then check your data.
Regards,
Mahesh Wagh.

Create service purchase order with negative value

Hello,
we created a service purchase order using the specific item category (value D) and with the service number details. We posted the entry service sheet with the transatcion code ML81N and we did the invoice verification.
Now we need to reverse this document flow: in particular our requirement is to create a new purchase order (like a return order for goods) and then to post an entry service sheet with the opposite sign (both cost center and G/L account).
Do you know whick document type I can use or how i can meet this requirement? Please consider that I cannot reverse the original document but I need to create new ones.
Thanks in advance,
Alessandro

check below thread;
service order
yogesh

ISSUE WITH SERVICE PURCHASE ORDER STATUS

Hi
There is an issue with a Service PO.When I created a service p.o the
p.o value was 1,543,695.60 USD . I created service entry sheet and GR
for 1,029,130.40 USD.
The still to be delivered amount should be 1,543,695.60-1,029,130.40 =514565.20 USD
But the Amount Still to be delivered in p.o STATUS HEADER DATA screen shows 191,761.60 USD.
Actually the system should show the delivered status as 514565.20 USD.
What should be the cause for this???
I checked the invoice also.Invoicing is done for 1,029,130.40 USD.
Apperciate ur immediate feedback on this.

Hi
S012 is updated by the Purchase Order creation date, not the Goods Receipt date. e.g. a Purchase Order is created in January and good receipt is in February and March, S012 will shows the values in period January.
try Transaction MC26
Info structure S012 Update group (stats) SAP
Double click on Goods received qty
In the section Date field for period determination
check regarding date or change accordingly
hope it helps.

Condition type for deduction in service purchase order

Hi All,
Our client has scenario where in transport service Purchase order, client wants to deduct some part of amount as a security fund.
E.g client takes transport service from vendor amounting Rs. 1000 and client deducts Rs. 10 as a security fund so payment to vendor is Rs. 990. This deduction amount should go to separate GL.
Kindly let me know how can we map this scenario? I guess we can do this with the help of condition type but dont know from where to start and what will be the nature of condition type.
Thanks in advance.
Regards,
Nisha.

Hi
What client is going to do with security deposit? Do they settle over a period of time?
Based on that you can do the config setting.
Case 1) Retaining of security deposit.
If client is not paying back and wants to keep the security deposit. They Wants to have track record of the same. Then you can use Z condition type by copying R002 discount using M/06 and assign GL in OBYC for that condition type.
Case 2) paying back security:
Create Z condition type by copying any freight condition and assign GL in OBYC
While creating PO use condition type.
While repayment of security deposit FI will use same GL as Db and vendor account as Cr using F-44.
Rgs

Subcon service Purchase order

Hi,
In my scenario I am sending material i.e Shirts ( item) for ironing process to the vendor as subcontracting ironing service through order. I would like to get back the material from vendor w.r.t PO order and payment to made to service performed throgh invoice verification w.r.t service entry sheet.
My thought up on the process to create subcontracting PO on subcontracting vendor along with articles. Article will be received to vendor as subcon article w.r. t subcon PO. After completion of service it will be return to our end w.r. t PO. GRN will be performed. Since it is regular practice, I would like to create service master for repective services and will be treated /incorporated in PO similar to service purchase order. Based on this purchase order SES will be created and payment of service will be settled through invoice verification w.r.t service entry sheet.
Please let me know whether my thinking are in line or not. if not please suggest the alternative.you can reach through phone also.
Thanks & regards,
Sanjay Rahangdale
09327162228

ok

Import service Purchase order

Hi Experts,
I am facing this problem when i am creating import service Purchase order with Purchase requisition. my import pricing procedure have Assessible value percentage condition type,which is coming in import service PO with certain percentage and condition type is coming in display mode. i am unable to change this condition type value in PO.
          Access sequence not maintained for this condition type although it is picking some percentage.How can i find where it is picking and i want to make as editable this condition type in PO.
         If i create import PO with material code, the condition type not picking any percentage and it is coming as editable mode.
            if i create import service po without purchase requisition, this condition type not picking any percentage.
          the problem is create import po with Purchase requisition only.
Control data of condition type is: Cond. class     A       Discount or surcharge
                                                       Calculat.type    A        Percentage
Cond.category H       Basic price
Condition type is item condition.
Kindly help me,
Regards,
Makarand.

by going thru your problem, we understand that there are 2 different pricing procedures maintained.
Pls check in transaction MEK3 give your assess value condition type and you will know where from the record is being read.
To make condition editable and not editable. go to t.code M/06 and chnage "Manual entries" to "C Manual entry has priority:.
Thanks & regards
Hameed Pavez

DELIVERY COMPLETED indicator for Services Purchase Order

hello experts,
i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order.
i have a big problem:
is it possibile to set the DELIVERY COMPLETED indicator (ELIKZ) in services purchase order via BAPI or Function Module?
I'm working with BAPI_PO_CHANGE but and i succeded with material PURCHASE ORDER but not with SERVICES PURCHASE ORDER.
can anyone help me?
thanks in advance,
Eliana

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

Service purchase order bapi_po_create1 error: maintain services or limits

I am trying to create service Purchase Order.
I am getting error: 'Purchase order still contains faulty items, Please maintain services or limits'.
Struggling to solve this. Can anybody shed some light on this to solve.
I would appreciate your any help.
thanks.
The following is the code I am working.
REPORT ZAUTO_PO_CREATE1                        .
constants: c_x value 'X'.
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_polimits type standard table of BAPIESUHC,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
wa_BAPIESUHC type BAPIESUHC,
ws_po TYPE bapimepoheader-po_number.
data: wa_it_xlikp like line of it_xlikp.
loop at it_xlikp into wa_it_xlikp.
endloop.
data: wa_it_xlips like line of it_xlips.
loop at it_xlips into wa_it_xlips.
endloop.
data: wa_it_xvbpa like line of it_xvbpa.
loop at it_xvbpa into wa_it_xvbpa.
if wa_it_xvbpa-parvw = 'SP'.
wa_header-vendor = wa_it_xvbpa-lifnr.
endif.
endloop.
*data: it_komp type table of komp,
     wa_it_komp like line of it_komp.
     loop at it_komp into wa_it_komp.
     endloop.
service PO is only for YLF delivery type.
if wa_it_xlikp-lfart ne 'YLF'.
exit.
endif.
shipping conditions.
*case wa_it_xlikp-vsbed.
*when '3P' or 'CP'.
*exit.
*endcase.
wa_header-doc_type = 'YB'.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = '0005000000'.
wa_header-comp_code = 'OB01'.
wa_header-purch_org = 'OB01'.
wa_header-pur_group = 'OB9'.
wa_header-CURRENCY = 'USD'.
wa_header-vper_start = '20061118'.
wa_header-vper_end = '20061126'.
wa_header-ref_1 = 1.
wa_header-incoterms1 = 'AOS'.
wa_header-incoterms2 = ''.
wa_header-our_ref = 'N'.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
wa_headerx-ref_1 = c_x.
wa_headerx-incoterms1 = c_x.
wa_headerx-incoterms2 = c_x.
wa_headerx-our_ref = c_x.
wa_poitem-po_item = '00010'.
wa_poitem-short_text = 'Automatic generation - Freight'.
wa_poitem-plant = '0089'.
wa_poitem-quantity = '1'.
*wa_poitem-MATERIAL = '10'.
wa_poitem-NET_PRICE = '23.00'.
wa_poitem-po_unit = 'ACT'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
*wa_poitem-matl_group = 'S1'.
*wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = '00010'.
*wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-net_price = c_x.
wa_poitemx-po_unit = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_poitem-po_item .
**wa_poitem_sch-delivery_date = ''.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_poitem-po_item.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = wa_poitem-po_item.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '5210'.
wa_acct_***-co_area = 'OB01'.
wa_acct_***-costcenter = '36089'.
wa_acct_***-funds_ctr = 'DUMMY'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = wa_poitem-po_item.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
wa_acct_***-funds_ctr = c_x.
APPEND wa_acct_assx TO i_acct_assx.
*services/ limits
*wa_BAPIESUHC-limit = '3000.00'.
wa_BAPIESUHC-EXP_VALUE = '300.00'.
wa_BAPIESUHC-no_limit = 'X'.
*wa_BAPIESUHC-NO_FRLIMIT = 'X'.
append wa_bapiesuhc to i_polimits.
wa_services-pckg_no = '20'.
wa_services-line_no = '2'.
wa_services-service = '0005000000'.
wa_services-subpckg_no = '10'.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = 'TEXT'.
wa_services-from_line = '1'.
wa_services-to_line = '2'.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = '20'.
wa_srvacc-line_no = '1'.
wa_srvacc-serno_line = '02'.
wa_srvacc-serial_no = '02'.
wa_srvacc-percentage = '100'.
APPEND wa_srvacc TO i_srvacc.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
no_authority = c_x
no_price_from_po = c_x
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
*POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS = i_polimits
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
***confirms the document creation by database commit.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT          = 'X'
IMPORTING
RETURN        =
LOOP AT i_return INTO wa_return.
   WRITE wa_return-message.
ENDLOOP.

Fill this tables:
GT_POSRVACCESSVALUES TYPE STANDARD TABLE OF BAPIESKLC,
GT_POCONTRACTLIMITS   TYPE STANDARD TABLE OF BAPIESUCC,
Glauco

Price Change indicator in Service Purchase order

Dear Friends
I am making one service purchase order, at service item level one price change indicator appears if its selected then at the time of service entry sheet it is possible to change value
But in my case,this indicator is not appearing at the time of raising PO, can anybody guide me at what screen level we can make field settings according to this.
Regards
VIvek

I think it is invesible for you
go to Item detail scree in the PO
here you will see the Color squar at the corner of service tab
here click on that Icon
it will open the tablesetting pop up
here click on administrator adn uncheck the ESLL-PRS_CHG field
Than click on activate and save
now you will see this field.

Material in Service Purchase order

Hi Experts,
Please let me know is it possible to Enter Service and Material both in Service Purchase Order.
My client is asking for above requirement. He wants to add Material No. also in Service po.
If there is any possiblility. Please let me know.
Reg,
Ashok

Hi,
In standard purchase document ie NB system is allowing to add service and material both.
but my client has a seperate document type for Service purchase order.
When iam trying to add service and material both in this doc type system is throwing errors.
note:
I went to Purchase order documents types and selected the Service document type and in allowed item categories Standard doc type added.
Later i have created service entry sheet for service and done migo for material.
Could any one please explain whether is this the correct way.
Reg,
Ashok

Service purchase order, with price 0.

Hi again,
I have tested to create or modify a purchase order using (BAPIs CREATE1 and CHANGE) using the FREE_ITEM flag, but it doesn't work. There is a SAP note that explain that is not possible.
Anybody know any way to uptade a service purchase order line with price 0,
Thanks
BR
Jorge

hello,
please check with following code. this code works in SAP46C.
DATA: gs_ekpo TYPE ekpo.
DATA: gt_return TYPE TABLE OF bapiret2.
DATA: gs_return TYPE bapiret2.
DATA: gt_bapimepoitem TYPE TABLE OF bapimepoitem.
DATA: gt_bapimepoitemx TYPE TABLE OF bapimepoitemx.
DATA: gs_bapimepoitem TYPE bapimepoitem.
DATA: gs_bapimepoitemx TYPE bapimepoitemx.
parameters: P_EBELN like ekpo-ebeln.
parameters: P_EBELP like ekpo-ebelp.
CLEAR: gs_ekpo,
 gs_return,
 gt_return[],
 gs_bapimepoitem,
 gs_bapimepoitemx,
 gt_bapimepoitem[],
 gt_bapimepoitemx[].
SELECT SINGLE * FROM ekpo INTO gs_ekpo
WHERE
 ebeln = p_ebeln AND
 ebelp = p_ebelp.
IF sy-subrc = 0.
gs_bapimepoitem-po_item = gs_ekpo-ebelp.
gs_bapimepoitem-free_item = 'X'.
APPEND gs_bapimepoitem TO gt_bapimepoitem.
gs_bapimepoitemx-po_item = gs_ekpo-ebelp.
gs_bapimepoitemx-free_item = 'X'.
APPEND gs_bapimepoitemx TO gt_bapimepoitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
 EXPORTING
 purchaseorder = gs_ekpo-ebeln
* POHEADER =
* POHEADERX =
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* IMPORTING
* EXPHEADER =
 TABLES
 return = gt_return
 poitem = gt_bapimepoitem
 poitemx = gt_bapimepoitemx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POTEXTHEADER =
* POTEXTITEM =
* POPARTNER =
READ TABLE gt_return INTO gs_return WITH KEY type = 'E'.
IF sy-subrc EQ 0.
*- errors
 WRITE:/ 'E', gs_ekpo-ebeln, gs_ekpo-ebelp, 'BAPI',
 gs_return-message.
ELSE.
*- success
 IF p_test IS INITIAL.
 CLEAR: gs_return,
 gt_return[].
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
 WAIT = 'X'
 IMPORTING
 return = gs_return.
If you have made a single test in SE37; the update doesnot work as it needs a exclusive commit work.
Hope this helps.
Best Regards, Murugesh AS

Service purchase order with quantity

Hi all,
Is it possible to create a service purchase order with quantity ?
Our client is using sap b1 2005b pl39.
Expecting you all valuable reply.
Jeyakanthan

Hi, Jeyakanthan,
I guess there are 2 ways out for this:
1. Define the Service as an item ...i.e. create aitem master for it.Then you can define the quantities for it.
2. Use a UDF in the service type document as quantity and put a FMS to calculate the qty.
Nagesh

Service Purchase Order will create GR/IR

Similar Messages

Maybe you are looking for