Service purchase orders and invoice

Hi Team
Our payables team wants to enter invoice as and when they receive on Service POs.
We have seen SAP is not blocking MIRO before service entry sheet (MIGO) which SAP does in case of goods POs.
Do we have to maintain some config on FI side or MM side to make this happen?
Regards,
Amit

Service based IV will not allow user to create MIRO without service entry sheet.
My requirement is I want to enter MIRO before service entry sheet and it should get blocked.
Regards,
Amit

Similar Messages

Purchase Order and Invoice creation

Hi All,
I am having some fields related to Purchase order and Invoice creation, i have to find out the tables to which tables these fields belongs to.
Below are the Header fields:
Wrbtr Tcode - MIRO,
Lfsnr   Tcode - MIGO,
Evertn Tcode - Me32k,
Kbetr Tcode - Me32k,
Kschl Tcode - Mek1,
Selkz Tcode - Mek1,
Werks Tcode - Mek1,
Evart   Tcode - Me31k,
Frgco Tcode - Me35k,
Sddat Tcode - Me35k,
Below are the Detail fields:
Kbetr   Tcode - Mek1,
Konwa Tcode - Mek1,
Lgobe Tcode - Me21n,
Planloc Tcode - Me31k,
Datab   Tcode - Mek1,
Datbi    Tcode - Mek1,
Fromdate Tcode - Me31k,
Todate      Tcode - Me31k,
i have to retrive all these fields from tables, so plz anybody give me exact tables to use in the select quries to retrive these fields.
Thanks in advance,
Balu.

Hi,
U can get the req fields as follows:
Below are the Header fields:
1)Wrbtr Tcode - MIRO- table rseg ,field-wrbtr
give belnr (invoice no ) & BUZEI(item) if known, else, give ebeln,ebelp.
2)Lfsnr Tcode - MIGO,-table mkpf,give mblnr (mat doc no ) & ZEILE(item) field-xblnr or give ebeln,ebelp
3)Kbetr Tcode - Me32k,
table:konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
4)Kschl Tcode - Mek1,
Pass ebeln,ebelp to table ekpo, get mwskx(taxcode), u will get condition type kschl from FM -FI_TAX_GET_CONDITION_TYPES.
or
table:konh or konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV   as KNUMH in 1 of the tables-konh or konp or konv, wil get kschl.
5)Werks Tcode - Mek1,-table-ekpo, field-werks(give ebeln,ebelp)
Below are the Detail fields:
1)Kbetr Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
2)Konwa Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get konwa.
3)Lgobe Tcode - Me21n,give ebeln.ebelp in table ekpo, get lgort.pass lgort to table t001l, u wil get lgobe.
4)Datab Tcode - Mek1,table-konh,field datab
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in - konh ,wil get datab.
5)Datbi Tcode - Mek1,table-konh,field databi
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in table- konh,wil get databi.
Hope its useful to u.

Purchase Orders and Invoices

Hi all
Is there a report I can run that will show me all Purchase Orders and the Invoices posted against these P.O.'s. If there isnt can I create areport via SQVI and wjat tables must I join together.
Thanks
Vishnu

Hi Vishnu,
The simplest SQVI you can define for showing purchase orders and their invoices is with tables <b>VBRP</b> and <b>VBFA</b>. VBRP shows the basic information about the invoice items, and VBFA (document flow) shows basic info about the documents in the chain up to the invoice (for instance PO's.) You can later expand your report with EKKO and other tables.
I hope this tip was useful to you.
Best regards //Georg

Unlimited tolerance is automatically ticked in service purchase order and is in diplay mode

Hi,
In service purchase order in the delivery tab, I am unable to view underdelivery tolerance and unlimited tab is ticked automatically and it is in display mode . How to remove the unlimited tick mark for the service purchase order for a particular doc type. Please find the attached screenshot.
Regards
Badri

Its proposed by system,
If you do not tick the option, then you can make only one service entry sheet.
Please read the discussion No Limit and unlimited indicator in PO
And Unlimited Overdelivery with Item Category D
Here you can find the why this option should be ticked.
Regards
Dev

Different Currency in Purchase order and Invoice

Hi MM Gurus,
Kindly suggest me as to how to map the following scenario is SAP.
Purchase order is placed on the Vendor in currency USD. Vendor is from India.Excise details are not captured in Purchase order. Vendor invoice is in currency INR and all the applicable duties will be mentioned and this has to be
captured in Invoice entry.
Regards
Yoga

Hi Yoga,
You can use Parner Schema in your Vendor Master for this issue.
If you want a partner schema for your own document type then define your partner schema and assign to document type using the below mentioned path.
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER ->DETERMINATION - >PARTNER SETTINGS IN PURCHASING DOCUMENTS ->DEFINE PERMISSION PARTNER SCHEMAS
And then
ASSIGN PARTNER SCHEMAS TO DOCUMENT TYPE
Bye,
Muralidhara

Purchase Order and Invoice in Different Currency

Hi All
Is it possible to capture an Invoice with foreign currency agianst an order created in local currency using T.Code MIRO
Vishnu

Hi Vishnu ,
The Currency is defaulted from PO in MIRO and in PO it is defaulted from vendor master. So there is no option to change the currency in the MIRO. if you have to change it you have to change the PO and also set the conversion factor and also maintain the values in t-code OB08 for the same .
I am sorry but i dont think that there is any possibility at MIRO level for changing the currency.
Lekhram

Purchase Order and Invoice

Hi,
Is there a way to link a PO with its invoice details?
Thanks

Hi,
You can get the Invoice number for a PO from the GLPCA table in R/3.
The datasource for installing in BW is 0EC_PCA_3.
Install this and you will have the PO and the Invoice number in that DS.
Regards,
Balaji V

Service Purchase Order Setting

Hi Grus
Can any one guide me step by step configuration setting for service purchase order upto invoice parking.
regards

Hi,
I already defined FRL, GR / IR accounts. But when I accept serive through ML81N then I following message appear. I already defined account no. in WRX.
Entry Sh. POIt Rev. Sh. Txt AAss Error Message
"RC 3 M8 147 Account determination for entry INT WRX not possible."
regards

Purchase order and service entry sheet

Hi
Is there a way to prohibit modifications on the position of services purchase order when the service entry sheet and the invoice were already entered for that position?
Thanks in advance for your help
Tomas

hi, thanks for your help, but the problem that i have is when the service entry sheet and the invoice are allready entered, the user change the value of the position and the service tab, so the user can enter services for more amounts. So its produce difference on the purchase order history between the values of LERF (WE) and the value of the purchase position. For example
Service Purchase order for 100 dollars.
Tab service: 2 units for 50 dollars
The user enter one service entry sheet for 50 and the invoice for 50 (lerf and WE= 50)
Then the user change the position of the purchase order and increase the value to 100 and modifies the service tab to 1 services for 100.
Then he enter one service for 100 and the corresponding invoice..........so the result is the following:
Service purchase position: 100
LERF-WE: 150
so the purchase order history is inconsistence.
For that reason i whant to know is there is a wat to prohibit modifications on the position of purchase order
Thanks in advnace for your help
Enzo

Table for open Purchase order and pending invoices for vendors

Hi,
Are there any table to know open Purchase orders and pending invoices for vendors.
Quick response will be appreciated.
Thanks & Regards

hi,
Purchase Order:
S011:(PURCH: Purch. Group Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Vendor No (LIFNR)
S012: (PURCHIS: Purchasing Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Material No (MATNR)
Plant (WERKS)
Info Record Category (ESOKZ)
Material Group (MATKL)
Info Record (INFNR)
Country (LAND1)
EINE: (Purchasing Info Record: Purchasing
Organization Data)
Info Record (INFNR)
Purchasing Org (EKORG)
Info Record Type (ESOKZ)
Plant (WEKS)
EKET: (Delivery Schedules)
Purchasing Doc (EBELN)
Item (EBELP)
Delivery Schedule (ETENR)
EKPO: (Purchasing Document Item)
Purchasing Doc (EBELN)
Item (EBELP)
EKKN: (Account Assignment in Purchasing
Document)
Purchasing Doc (EBELN)
Item (EBELP)
Account Assignment (ZEKKN)
EKKO: (Purchasing Document Header)
Purchasing Doc (EBELN)
EORD: (Purchasing Source List)
Material No (MATNR)
Plant (WERKS)
Source List No (ZEORD)
thx,
Ganpat

Terms user query Changes in unit price in purchase order and a/p invoice

Dear sir
please give me a term user query for , if any changes in unit price in purchase order and a/p invoice

Hi,
Try this:
SELECT Distinct ' true'
FROM adoc T2
JOIN ado1 T0 ON T2.docentry = T0.docentry AND T2.Objtype = '22'
JOIN por1 T1 ON T1.docentry = T0.docentry AND T1.Linenum=T0.Linenum
WHERE $[$38.14.number] != T0.Price
Thanks & Regards,
Nagarajan

Purchase Order with Invoice Plan

Hi,
I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
How the PO is linked to the Invoice Plan and how the process happens in SAP?
Thanks in advance!

Creating an Invoicing Plan
The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
If you are using the Enjoy purchase order, you will find:
·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
·         The account assignment among the item details on the Account Assignment tab page
·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
Prerequisites
Vendor Master Record
Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
(If you wish to enter invoicing dates manually, this is not necessary.)
Purchase Order
●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
Customizing
Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
Procedure
       1.      Create a purchase order with account assignment (framework order).
Click to access the item overview (or the overview of service lines if you chose item category D for services).
       2.      Enter the desired material or service, the quantity, and the price.
       3.      Select the desired item and click Account Assignments to access the account assignment screen. Enter the account assignment for this item.
       4.      Click to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
○     IR must be set.
○     You must set ERS if you wish to have Evaluated Receipt Settlement.
○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
       5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click Continue.
You can use the following invoicing plan types:
○     Periodic Invoicing Plan
■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
■      You can enter the start and end dates for the invoicing plan.
■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
○     Partial Invoicing Plan
■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
■      You get an empty date overview in which you can manually enter the desired dates.
■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
You have the following options:
●      You create a reference invoicing plan in Customizing for the invoicing plan type.
●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
●      As a down payment (percentage or value)
●      As an invoicing date (percentage or value)
●      As a final invoice
       6.      Click to return to the item overview.
       7.      Click to save the purchase order item with the invoicing plan.
You can then start the automatic invoice creation process during invoice verification.
For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
Generating Further Invoicing Plan Dates
If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
Procedure
To schedule further invoicing dates, proceed as follows:
Choose Purchase order ® Follow-on functions ® Period. invoicing plan
Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
A log can be created if desired.
Result
The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
regards,
indranil

Service Purchase Order

Hi MM Gurus,
Scenario is
Service Purchase Order for Travelling Charges ,
Service maintained at service tab is travelling charges 12 nos for 38000/- each
item cat D .
In main text of PO item qty appears is 1 nos and amount is 456000/- ok.
Service tax ia applicable on it is 12.36% ok
But base amount for this is 40% of 38000/- that means service tax is applicable on 40% of gross amount.
I am using manual condition Zser that is base service amount.
Up to this it is working fine.
Service Entry sheet filled, accepted and saved .ok
there are two service sheets 10000283 and 100000284 for example
During MIRO if i took the ref of service entry sheet and try to post the purchase order the tax amount system calculates is based on total amount that is 4560000/- and not on 38000/-, due to this i am facing problems in invoice verification.
Pls suggest
With regards
Nagarjuna Reddy

Dear Prashant,
No I have checked once again, Tax value is not getting divided as per individual service entry.
means that for total 10 service sheets are there and during miro is entered with referce of service entrysheet, tax value is showing means for each entry sheet total tax of 10 entry sheet of 40% amount is shown
Pls suggest
Nagarjuna Reddy

Subcon service Purchase order

Hi,
In my scenario I am sending material i.e Shirts ( item) for ironing process to the vendor as subcontracting ironing service through order. I would like to get back the material from vendor w.r.t PO order and payment to made to service performed throgh invoice verification w.r.t service entry sheet.
My thought up on the process to create subcontracting PO on subcontracting vendor along with articles. Article will be received to vendor as subcon article w.r. t subcon PO. After completion of service it will be return to our end w.r. t PO. GRN will be performed. Since it is regular practice, I would like to create service master for repective services and will be treated /incorporated in PO similar to service purchase order. Based on this purchase order SES will be created and payment of service will be settled through invoice verification w.r.t service entry sheet.
Please let me know whether my thinking are in line or not. if not please suggest the alternative.you can reach through phone also.
Thanks & regards,
Sanjay Rahangdale
09327162228

ok

Will Service Purchase Order will create GR/IR ?

Hi,
This is with referece to creating Service purchase order.
I Created Service Purchase order but when i am doing GR/IR MIGO and Invoice Verification MIRO.it is not allowing me.my question is for Service Purchase order whether we can do GR/IR and also MIRO Transactions.
It will be help ful if you can send some configuration steps.
Thanks
Micheal

Hi,
If you are using item category B then you are not using Service Purchase orders.
Service POs use item category D and are quite different to "normal" POs that is why everyone has been getting confused by your problem.
What you are doing is using normal purchase orders but usinf them for ordering services (with a limit on the value, i.e. item category B).
So let us get this straight first. You are using normal purchase orders with item category B.
If you want to control the GR flags then this is done by configuring the Account assignment categories, using the config transaction (Not by document type, this controls which fields are visble or changeable).
The path to the config is MM > Purchasing > Account assignment > Maintain account assignment categories.
So it all depends on which account assignment category you use and all are available for your "service" POs (except blank) and non-service POs.
I hope this clarifies the issue.
Steve B

Service purchase orders and invoice

Similar Messages

Maybe you are looking for