Services donu00B4t exist in SRM after R3AS
I have SRM 5.0
I run trx R3AC1 and R3AS with services, but these services don't exist in SRM. There are not transacctions errors in SLG1, SMQ1 and SMQ2.
Please Help
Hi
1. Verify the Middleware configuration as per following document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/309258e9-0da2-2d10-b598-bf27edb56a31
2. Check if there is any queue stuck in ECC outbound or SRM Inbound. If so delete or process those queues
3. CHeck if filter is set to product type in Filter settings
4. Replicate the service again.
Regards
Virender Singh
Similar Messages
-
NEVER BUY BB HANDSET. IF IT STOPS WORKING YOU WILL HAVE TO THROW IT COZ THE THE COMPANY AFTER SALES SERVICE DOESNT EXIST, I HAD A BB CURVE 9360
Of course you aren't explaining what your device issue is, you're just here to complain.
THIS is a Community Support Forum, meaning user-to-user assistance. We enjoy helping users. If you have a complaint, you're in the wrong place. If you need assistance, many many knowledgeable users are here to HAPPILY help you out.
And turn off your ALL CAPS key... at least attempt to be appear friendly rather than than shouting at us. Thanks!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
HelenHi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat -
Error: Web service object exists
Hi all!
I am very new with SAP Web Services so, to learn, I created a very simple function, enabled it for RFC, and activated and successfully tested it.
After that, I tried to create a Service, starting the Wizard (Utilities > More utilities > Create web service > From the Function Module).
I followed all steps, setting 'Endpoint type' to 'Function Module'; enabling 'Mapping names'. All remaining values are default values.
Service name was set to 'Z_ESTRAZ_MATERIALI_n' (in the first trial n=1).
After completion of the wizard, in the status bar appears a red-icon message that indicates that the service already exist (but I am sure that no service exists with that name).
- The problem is highly reproducible (with new names).
- In the transaction WSADMIN I cannot see any service listed.
- SAP version: SAP ECC 6.0.
What can I check to solve the problem?
Many thanks.Hi all!
After some trial-and-error it seems to me that the problem is solved when logging in English instead of Italian language. Doing this way, everything is ok.
Bye. -
Error 1051429. Analytical services Product Existent check Fails
Hi,
We want to externalize users from native to shared services.
Note: The Enviornment is UNIX.
Following activities were carried out from our end.
1. Configured database. (Oracle)
2. Registered with shared services.
3. Deployed to Application server. (Tomcat)
4. Ensured that administration services are up after registration.
5. Ensured shared services are working fine.
6. Backed up .sec files, config files and bak files from bin directory and deleted all users except admin user from the
mgt console.
7. We then went on to externalize the users from the Console. This did not succeed.
Error message given was:-
Error 1051429. Analytical services Product Existent check Fails
against the shared services server with error. [Unable to connect to
shares services , make sure the shared services is running and try
again.]
When we did not succeed we went to user management console and created a new user , gave it all rights and then tried externalizing that user. But that too failed.
More things done were :-
1 Changed the netdelay settings in config to 3 hours.
2 Set unix server time with shared services time in sync.
3 Re-Registered the Analytical Services as above.
4 Using management console established sync with analytic services (thru mgt console).
Nothing works. Hope someone shall provide a solution soon.
Thanks in advance for the same.
Regards
BalakrishnanHi Balakrishnan,
Just check whether services called 'OpenLdap' and 'Shared Service' are running or not if not then please start them and then try to externize users.
Atul K, -
I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps -
Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Service entry update in SRM SUS
Dear All,
We are in SRM7, using MM-SUS,creting a confirmation for a service PO from SUS
It is creating a service entry in MM.
After service entry release it created a GR as per the standard procedure.
Now when i run RPODDELIVERY update sending out of MM system using IDOC STPPOD, i could not see the GR in SUS under All Goods recipets.
This scenario is working successfully for material PO
Please suggest.
Regards,Hi,
We don't do Inbound dilevery in Service Procurement. We post service entry.
As I said there should be some setting missed in 'SE_SERVICES_PROCUREMENT' XI scenario. You should trouble shoot it.
As of I remember after posting service entry sheet; confirmation used to get created in SUS.
Regard,
yaniVy
reward if helps -
Sql Server 2014 showing no services in the configuration manager after install?
I'm using Windows 8. Recently I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
no services listed.
During installation, there were no any errors.
See pic from here -> http://stackoverflow.com/questions/26159248/sql-server-2014-showing-no-services-in-the-configuration-manager-after-install?noredirect=1#comment41009151_26159248
I did search everywhere but still I didn't find anything, please help me resolve this issue. I downloaded Sql server management studio 2014 from here-> http://msdn.microsoft.com/en-in/evalcenter/dn434042.aspx
Inside `win+r` as i type `services.msc` I'm unable to see any sql or service into it.I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
no services listed.
Of course not, SSMS = SQL Server Management Studio is just a tool/frontend, not a Service. You have to install SQL Server database engine.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
We want to the whether the below functionality exists in SRM
We want to the whether the below functionality exists in SRM.
In the shopping cart when we click on the details against any item and get in to the follow-on documents. We have two options. 1) Display as Graphic 2) Display as table.
When we select graphic display, we get hyperlink for the order number. When we click on this link we get details pertaining to only to that specific item only that too in a tabular form (in the same screen). Is this the standard SRM functionality? Or is there a way that when we click on this link do we get the PDF copy of the order showing all the items along with terms and conditions whcih can be saved on to our desk top.Hi,
This is the standard behavior. If you click on the item link in SRM 5.0, it will open there in tabular form with less details. In SRM 7.0, if you click on the Related Documents tab and then PO number, system will open the PO in new window where you can Export it to Excel or Print it using Print Preview and then save it in PDF. I don't think in SRM 5.0 if there is functionality to directly save PO in PDF through SC.
Thanks,
Anshuk Saxena -
Calling another ITS service from existing ITS service
Hi to Everyone,
I would like your advice on calling another ITS service from existing ITS service.
From my current ITS service eg. "Z_TESTA", i wish to call another ITS service "Z_TESTB". The problem is that it always prompt for userid and password when i called the 2nd ITS service. However, user already enter the password & id when they login to the 1st ITS service. Is there a way to call this new ITS service w/o the userid & password prompt again?
Below is the codes that we used to call the new ITS service:
(a) "http://.../scripts/wgate/webgui/!?~transaction=z_testb"
OR
(b) "http://.../scripts/wgate/z_testb/!"
We used both method (a) and (b) but same outcome. Thank you in advance!
YanaJHi YanaJ,
in order to skip a manual login you have to have the credentials somewhere. If you disabled cookies, what I told you will not work. Another possibility would the usage of X509 client certificates. But this requires that you have a setup that distributes the certificates of all of your users. I personally nether setup such scenario. Maybe someone other can explain what you have to do.
Best regards,
Klaus -
No 4G, Goggle location service and Amazon app crashes after 10/13 update.
No 4G , Google location service and Amazon app crashes after 10/13 update. I had no issues after the March update, but now sorry to have downloaded this one which was intended to "fix" issued encountered with the March update.
Epharoah,
No 4G? Apps crashing? This doesn't sound normal for any device. What make/model phone do you have? Please share details so we can assist further. Thanks.
ErinW_VZW
Follow us on Twitter @VZWSupport -
Service entry Sheet was reversed after the invoice as posted and rebooked
Hi..
Service entry sheet was reversed after the invoice as posted and rebooked with final entry marked. The rebook transaction created a different $ amount than the original SES. The difference between the 2 amounts is causing a GRIR out of balance on the PO. MR11 does not indicate a GRIR out of balance.
why did SES rebook a different value?
How can we clean up the GRIR out of balance?
Please help...
MercyThis is a standard SAP procedure.
SAP Note 440942 is helpful to sort this out.
Thanks,
Mercy -
Stateful Web Services: how to free session after commit?
Hello,
We're developing an interface via web services to DM5.
The web services are stateful, so we can handle BAPI_TRANSACTION_COMMIT/ROLLBACK.
Apparently the web service session is not freed after the call to BAPI_TRANSACTION_COMMIT/ROLLBACK. This is visible in a test that sends 100 operations very quicly, the app server stops responding after the first 90 calls (actually the server starts responding a void text/xml). After a while (I guess after some http sessions are available after timeout), the server starts responding again.
Our assumption was that commiting the transaction would free the corresponding session, but it looks like this is not the case...
Do you have any clues on that? Timeout is the only way to free a web service session?
Thank you
RegardsHi,
Please refer the below article and browse code.
http://code.msdn.microsoft.com/Remote-Authentication-in-b7b6f43c
Thanks,
Srikanth -
Service PO is getting unreleased after Service entry creation
Hi All,
In our scenario user is able to unrelease service purchase order even if a valid service entry exist for it in system.
I want to know that is there any system message available for restricting the user from unreleasing a po if valid service entry exist.
Thanks & Regards
RashidHi,
Make changability option as "1" - Cannot be changed in release indicator setting of PO release strategy.
Then system won't allow you to revoke PO.
Path SPRO > MM > PURCHASING > PURCHASE ORDER > RELASE PROCEDURE > DEFINE RELEASE PROCEDURE.
Regards,
Sandesh Sawant
Maybe you are looking for
-
Sharepoint 2013 RS - Adding a New "Data Source" or "Report Builder" in a Library
I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs: 'New Document' requires a Microsoft Shar
-
No longer Authorized, but only the OWA app makes my iTunes stop syncing
Just before New Year i installed the app OWA do to a new office365 account. now when I sync my iPhone 4 (iOS7), i asks me to authorize my computer as it is not authorized with the OWA app. then i type my password and get the msg - "This computer is a
-
Can't download windows support software with Boot Camp
I'm trying to install windows 7 on my MacBook Pro using Boot Camp, I start downloading windows support software but the download is very slow (compared to my usual download speed) and it seems it fall in loop, the downloading bar doesn't move... What
-
Hi, I am connecting my MacBook to an Plasma Tv with an s-video cable, but the image is not fulling the screen, its boxed all arroud like 3 inches, please help me thanks sorry for my english
-
Hi All Our current scenario bank statement gendered each and every day and we are uploading the bank statement with same format by using transaction code FF.5 . We are trying to upload the bank statement on weekly basis with same format and same bank