Session Manager Error

When executing the function SM_IInstrSessionMgrGetNames I'm getting the following error code returned:
-2147352567
The entry within the NISessionMgr.ini file appears to be correct and the prefix that I'm passing matches the one within the ini file.
Any ideas?

Do you have an example that will cause this problem? The error message is a generic "Exception Occurred".
I tried to reproduce the behavior by calling this function in CVI, but everything seemed to work fine for me.
Allen P.
NI

Similar Messages

Session management error: Authentication Rejected error

Please help me with this error I get when trying to build qdvdauthor:
/opt/qt/bin/uic qplayer/engines/dialogqxinesetup.ui -o .ui/dialogqxinesetup.h
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
the xhost + command does not help and ...
the command: xhost +localhost gives me the following message:
xhost: bad hostname "localhost"
Thank you

br4 wrote:
no
in /etc/rc.conf
# NETWORKING
HOSTNAME="myhost"
and /etc/hosts is 127.0.0.1
i use dhcp . so should i change the /etc/rc.conf ?
At least something worked! FYI, I use dhcp as well and here are the relevant parts of my /etc/rc.conf
# NETWORKING
HOSTNAME="darkstar"
and /etc/hosts
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost darkstar

TListen not starting...Session Manager error

Hi
when i install tuxedo 7.1 , i get an error that tuxedo/bin was not added in the
Session Manager..and then my listener does not start..
any clue in to that..
Thanks in advance
Vivek

starts up the instance and shuts down immediately.
Here is the log
/u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Starting up database "sales"
Thu Dec 24 23:26:47 IST 2009
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 24 23:26:47 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORA-00371: not enough shared pool memory, should be atleast 62198988 bytes
SQL> Disconnected
/u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Database instance "sales" warm started.

CrystalDecisions Session Manager error

Hi,
I am running a Windows 7 Enterprise 64 bit machine. I have VS2010 with .NET 4 installed on the machine. I am running ASP.NET 4.0 application which would connect to the Business Object server and generate a pdf report. I downloaded and installed the CrystalReports for VS 2010 on my machine and it had installed assemblies CrystalDecisions.Enterprise.Framework,CrystalDecisions.Enterprise.Infostore ver 10.5.3700 etc to the GAC.
But when I run this line CrystalDecisions.Enterprise.SessionMgr boSessionMgr=new CrystalDecisions.Enterprise.SessionMgr();
I get the error:
"Retrieving the COM class factory for component with CLSID {1CD19B37-4AEB-4EB0-B4DE-3CB9FA31D6CC} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). "
I have not installed the Business Objects SDK on machine.Do I need to install it?
Am I missing any assemblies?
Let me know.
Thanks.
Irene

Hi Irene,
You have to use the Crystal Reports 2008 with assembly file version 12.x to be able to connect to BOE. CR for VS 2008 version 10.5 does not allow you to connect to BOE 3.1 either.
What version of BOE are you trying to connect to?
And to use CR 2008 you have to install the bOE Client tools and SDK on your DEV PC as well as distribute the BOE and CR runtime on your APP server.
Don

JMStudio Error "Can not create session manager"

Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advance

Um,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

JMF error - Format of Stream not supported in RTP Session Manager

java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
why this erro occors?
I already created the DataSink.
When I try to do this...
dsk.open(); //here the error got
dsk.start(); Code of server of media
I want to sent audio (wav) like a radio, but from file. Without stop to send streaming. PullBufered
*Class Server that you offers Streaming of midia
public class Servidor {
private MediaLocator ml;
private Processor pro;
private javax.media.protocol.DataSource ds;
private DataSink dsk;
private boolean codificado = false;
//start the server service, passing the adress of media
// ex: d:\music\music.wav
// pass the ip and port, to make a server works
public void iniciarServicoServidor(String end,String ip, int porta)
try {
//capture media
capturarMidia(end);
//creates processor
criarProcessor();
// configure the processor
configurarProcessor();
//setContent RAW
descreverConteudoEnviado();
//format the media in right RTP format
formatRTP();
//creat the streaming
criarStreaming();
//configure the server
configurarServidor(ip, porta);
//in this method raise the excepition
iniciarServidor();
//when I try to open the DataSink.open() raises the exception
//java.io.IOException: Format of Stream not supported in RTP Session //Manager
// at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
} catch (RuntimeException e) {
System.out.println("Houve um erro em iniciarServicoServidor");
e.printStackTrace();
public void capturarMidia(String endereco)
try {
System.out.println("**************************************************************");
System.out.println("Iniciando processo de servidor de multimidia em " + Calendar.getInstance().getTime().toString());
ml = new MediaLocator("file:///" + endereco);
System.out.println("Midia realizada com sucesso.");
System.out.println ("[" + "file:///" + endereco +"]");
} catch (RuntimeException e) {
System.out.println("Houve um erro em capturarMidia");
e.printStackTrace ();
public void criarProcessor()
try {
System.out.println("**************************************************************");
pro = Manager.createProcessor(ml);
System.out.println("Processor criado com sucesso.");
System.out.println("Midia com durcao:" + pro.getDuration().getSeconds());
} catch (NoProcessorException e) {
System.out.println("Houve um erro em criarProcessor");
e.printStackTrace();
} catch (IOException e) {
System.out.println ("Houve um erro em criarProcessor");
e.printStackTrace();
public void configurarProcessor()
try {
System.out.println("**************************************************************");
System.out.println("Processor em estado de configura��o.");
pro.configure();
System.out.println("Processor configurado.");
} catch (RuntimeException e) {
System.out.println("Houve um erro em configurarProcessor");
e.printStackTrace();
public void descreverConteudoEnviado()
try {
System.out.println("**************************************************************");
pro.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW));
System.out.println("Descritor de conteudo:" + pro.getContentDescriptor().toString());
} catch (NotConfiguredError e) {
System.out.println("Houve um erro em descreverConteudoEnviado");
e.printStackTrace();
private Format checkForVideoSizes(Format original, Format supported) {
int width, height;
Dimension size = ((VideoFormat)original).getSize();
Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
Format h263Fmt = new Format(VideoFormat.H263_RTP);
if (supported.matches(jpegFmt)) {
// For JPEG, make sure width and height are divisible by 8.
width = (size.width % 8 == 0 ? size.width :
(int)(size.width / 8) * 8);
height = (size.height % 8 == 0 ? size.height :
(int)(size.height / 8) * 8);
} else if (supported.matches(h263Fmt)) {
// For H.263, we only support some specific sizes.
if (size.width < 128) {
width = 128;
height = 96;
} else if ( size.width < 176) {
width = 176;
height = 144;
} else {
width = 352;
height = 288;
} else {
// We don't know this particular format. We'll just
// leave it alone then.
return supported;
return (new VideoFormat(null,
new Dimension(width, height),
Format.NOT_SPECIFIED ,
null,
Format.NOT_SPECIFIED)).intersects(supported);
public void formatRTP()
try {
// Program the tracks.
TrackControl tracks[] = pro.getTrackControls();
Format supported[];
Format chosen;
for (int i = 0; i < tracks.length; i++) {
Format format = tracks.getFormat();
if (tracks[i].isEnabled()) {
supported = tracks[i].getSupportedFormats();
// We've set the output content to the RAW_RTP.
// So all the supported formats should work with RTP.
// We'll just pick the first one.
if (supported.length > 0) {
if (supported[0] instanceof VideoFormat) {
// For video formats, we should double check the
// sizes since not all formats work in all sizes.
chosen = checkForVideoSizes(tracks[i].getFormat(),
supported[0]);
} else
chosen = supported[0];
tracks[i].setFormat(chosen);
System.err.println("Track " + i + " is set to transmit as:");
System.err.println(" " + chosen);
codificado = true;
} else
tracks[i].setEnabled(false);
} else
tracks[i].setEnabled(false);
} catch (RuntimeException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public void tocar()
pro.start();
public void criarStreaming()
try {
System.out.println("**************************************************************");
if (codificado)
System.out.println("Midia codificada...");
System.out.println("Processor entra em estado de realize.");
pro.realize();
System.out.println("Processor realized.");
System.out.println("Adquirindo o streaming a ser enviado.");
ds = pro.getDataOutput();
System.out.println("Streaming adquirido pronto a ser enviado.");
} catch (NotRealizedError e) {
System.out.println("Houve um erro em criarStreaming");
System.out.println(e.getMessage());
e.printStackTrace();
catch (Exception e) {
System.out.println(e.getMessage());
public void configurarServidor(String ip, int porta)
System.out.println("**************************************************************");
String url = "rtp://" + ip + ":" + porta + "/audio/1";
System.out.println("Servidor ira atender em " + url);
MediaLocator mml = new MediaLocator(url);
System.out.println("Localizador de midia ja criado");
try {
System.out.println("Criando um DataSink a ser enviado.");
dsk = Manager.createDataSink(ds, mml);
System.out.println("DataSink criado.");
} catch (NoDataSinkException e) {
e.printStackTrace();
public void iniciarServidor()
try {
System.out.println("**************************************************************");
dsk.open();
System.out.println("Servidor ligado.");
dsk.start();
System.out.println("Servidor iniciado.");
} catch (SecurityException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
Gives that output console.
All methods are executed but the last doesnt works.
The method that open the DataSink.
What can I do?
Iniciando processo de servidor de multimidia em Sun May 13 22:37:02 BRT 2007
Midia realizada com sucesso.
[file:///c:\radio.wav ]
Processor criado com sucesso.
Midia com durcao:9.223372036854776E9
Processor em estado de configura��o.
Processor configurado.
Descritor de conteudo:RAW
Midia codificada...
Processor entra em estado de realize.
Processor realized.
Adquirindo o streaming a ser enviado.
Streaming adquirido pronto a ser enviado.
Servidor ira atender em rtp://127.0.0.1:22000/audio/1
Localizador de midia ja criado
Criando um DataSink a ser enviado.
streams is [Lcom.sun.media.multiplexer.RawBufferMux$RawBufferSourceStream;@a0dcd9 : 1
sink: setOutputLocator rtp://127.0.0.1:22000/audio/1
DataSink criado.
Track 0 is set to transmit as:
unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)
Since already thanks so much.
Exactally in this method raises erros.
Ive tried another formats (avi, mp3) but all with the same error, what I can do?
[code] public void iniciarServidor()
try {
System.out.println("**************************************************************");
dsk.open();
System.out.println("Servidor ligado.");
dsk.start();
System.out.println("Servidor iniciado.");
} catch (SecurityException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
Track 0 is set to transmit as:
unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)

unknown, 44100.0 Hz, 16-bit, Stereo,
LittleEndian, Signed, 176400.0 frame rate,
FrameSize=32 bits
java.io.IOException: Format of Stream not supported
in RTP Session Manager
The fact that it doesn't know what the format is
might have to do with the problem. I've had similar
problems, and I've traced it back to missing jars and
codecs. Have you tried running the same code locally
without the transmission to see if you player will
even play the file?Already and it works, I used Player to play it and play normally, I try to make it with the diferents codecs of audio and video, but no sucess.

BI Administrator error: Session Management will not work

Hi!
I am about to set up BI Administrator Addon in SAP Portal. All the configuration steps seems to be ok.
Unfortunately when I try to start some of applications of BI Administrator I get the following error:
Session Management will not work.
Please check the DSM log file for details
Question:
How can I solve this problem?
Thank you very much!
regards

Hi
This error means--Please notify us of this problem by submitting an IT Service Request (Please Note: In order to log into the Infra system, you will need to preface your NKU account with nku\. For example, if your user name is smithj7, the "User Name" field would need to be populated with nku\smithj7.)
under the problem type "SAP BW/Portal.
Much of EP / BASIS issue.
Hope it helps

I deleted my saved sessions in session manager in error. Can I recover these in any way?

As above

*http://sessionmanager.mozdev.org/documentation.html
There is an option to have Session Manager automatically back up your current browsing session at browser shutdown, ask you if you want to save or never save. By default it backs up the ten previous browsing sessions and crashes (deleting older ones). This can be changed in the Startup and Shutdown options on the General Options page. Old sessions are only removed on browser shutdown. Restarting or recovering from a crash will not remove old sessions. Warning, the backup is made when the browser actually shut downs, so if you close the browser by "X"ing out of all the windows, only the last window will be saved. If you want to save the last session, use the File->Exit command or better yet manually save it or use the autosave feature.

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

What is new with MAX 2.0 and is it compatible with Session Manager?

We added non-IVI instrument information in, basically the same structure as for IVI instruments,
into the ivi.ini file to keep all instrument information in the same place. Using MAX Version 1.1 caused no problems whatsoever and the system worked fine. With the advent of MAX 2.0 you seem to use ivi.ini as well as config.mxs to store instrument information. What we have found now is that given a working ivi.ini file from MAX 1.1, we end up with 2 or 3 copies of all the devices in the IVI Instruments->Devices section! When the duplicate entries are deleted and the application exited, the
ivi.ini file is updated minus the [Hardware->] sections which contain the resource descriptors that our appl
ications look for. As an added complication, under MAX 2.1 (From an evaluation of the Switch Executive) It behaves the same, except that it almost always crashes with one of the following errors. 'OLEChannelWnd Fatal Error', or 'Error#26 window.cpp line 10028 Labview Version 6.0.2' Once opened and closed MAX 2.1 will not open again! (Note we do not have LabVIEW on the system.) What is the relationship between the config.mxs and ivi.ini now? Also, your Session Manager application (for use with TestStand) extracts information from ivi.ini and may expect entries to be manually entered into ivi.ini (e.g. NISessionManager_Reset = True) i.e. Is the TestStand Session Manager compatible with MAX 2.0?

Brian,
The primary difference between MAX 1.1 and 2.x is that there is a new internal architecture. MAX 2.x synchronizes data between the config.mxs and the ivi.ini. The reason you're having trouble is that user-editing of the ivi.ini file is not supported with MAX 2.x.
Some better solutions to accomplish what you want:
1. Do as Mark Ireton suggested in his answer
2. Use the IVI Run-Time Configuration functions. They will allow you to dynamically configure your Logical Names, Virtual Instruments, Instrument Drivers, and Devices. You can then use your own format for storing and retrieving that information, and use the relevant pieces for each execution. You can find information on these functions in the IVI CVI Help file located in Start >> National I
nstruments >> IVI Driver Toolset folder. Go to the chapter on Run-time Initialization Configuration.
I strongly suggest #2, because those functions will continue to be supported in the future, while other mechanisms may not be.
--Bankim
Bankim Tejani
National Instruments

Open Session: unexpected error

Hi everybody,
I'm using BO XI R3.0 and since couple of last days I'm having problem with opening Universe Designer. The message I'm getting is "Open session: unexpected error". This happens after I provide user name and password for the access to the system.
Does anyone know the solution to the problem beside uninstalling Client tools etc. (I already did that) because the same happens when I want to open Desktop Intelligence, Translation Manager, etc.
Ivan

In addition to my previous question, I have another query. I am trying to create a macro to rename, hide/show and change some more properties of universe objects. Below is the code to log on to designer and open the required universe
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Set DesignerApp = New Designer.Application
    DesignerApp.Visible = True
    Call DesignerApp.LogonDialog
    Set Univ = DesignerApp.Universes.Open
    DesignerApp.Visible = False
    Set Wksht = ThisWorkbook.Worksheets("Objects")
    Wksht.Unprotect
    Range("Objects").ClearContents
    Call GetObjectInfo(Univ.Classes, 1)
    Range("Objects").Resize(Wksht.UsedRange.Rows.Count - 1, 5).Name = "Objects"
    Range("Objects").Columns("H:L").Value = Range("Objects").Columns("B:F").Value
    Wksht.Protect
    DesignerApp.Quit
    Set DesignerApp = Nothing
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What happenns is that after I log on using my macro, if I try to log on to designer again I get the "Open Session: unexpected error" error. If I delete the LSI folder on my local machine, then I can log on fine. but everytime I use the macro I get the error afterwards. I am logging onto a SAP system.
Any help on this one?

Session management in Info View with two different logins using single sign

There is a form with 2 user logins UserA and User B to redirect to infoview with sso in my application. I am able to go to each of the Infoview pages successfully but have the following problem.
User A logs in and infoview opens in a new IE window and sees his/her folders based on permissions and is able to do his/her work for the first time.
User B logs in andand infoview opens in a new IE window sees his/her folders based on permissions and is able to do his/her work for the first time.
After a while when User A tries to access the InfoView in the previously opened IE Window, he/she gets an error message. An error has occurred: The object with ID 2519 does not exist in the CMS or you don't have the right to access it.
User B is able to continue his/her work. Who ever logs in the last, he/she is able to continue his/her work but the other one gets an error.
Please let me know on how to address this issue . I added logonToken and tried everything at my hand but no success. Is this session controlled by business objects or by the jsp page. What more changes are required for my jsp page to fix the error. Attached below are the form and the applogon.jsp snippets.
 applogon.jsp
 IEnterpriseSession enterpriseSession = null;
 Exception failure = null;
 boolean loggedIn = true;
 String redirectURL = null;
 // If no session already exists, logon using the specified parameters.
 if (enterpriseSession == null){
 try{
 // Attempt logon. Create an Enterprise session manager object.
 ISessionMgr sm = CrystalEnterprise.getSessionMgr();
 // Log on to BusinessObjects Enterprise
 enterpriseSession = sm.logon(username, password, "cms", "secEnterprise");
 }catch (Exception error){
 loggedIn = false;
 failure = error;
 if (!loggedIn){
 // If the login failed, redirect the user to the start page.
 return;
 }else{
 // Store the IEnterpriseSession object in the session.
 session.setAttribute("EnterpriseSession", enterpriseSession);
 // Create the IInfoStore object.
 IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
 // Store the IInfoStore object in the session using the helper functions.
 session.setAttribute("InfoStore", iStore);
 // Store the CMS name for later use.
 session.setAttribute("CMS", "CMS");
 // Create the IReportSourceFactory object.
 IReportAppFactory reportAppFactory =(IReportAppFactory)enterpriseSession.getService("RASReportService");
 // Store the IReportSourceFactory object in the session using the helper functions.
 session.setAttribute("ReportAppFactory", reportAppFactory);
 // Retrieve the logon token manager.
 ILogonTokenMgr logonTokenMgr = enterpriseSession.getLogonTokenMgr();
 String logonToken = logonTokenMgr.createLogonToken("", 60, 100);
 String infoViewURL = null;
 String tokenParam = null;
 infoViewURL = "/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.do";
 tokenParam = "token=" + logonToken;
 redirectURL = infoViewURL + "?" + tokenParam;
 // Retrieve a logon token and store it in the user's cookie
 // file for use later.
 Cookie cookie = new Cookie("LogonToken", logonTokenMgr.createLogonToken("", 60, 100));
 response.addCookie(cookie);
 // Store the logon token for later use.
 session.setAttribute("token", enterpriseSession.getLogonTokenMgr().getDefaultToken());
 // Redirect the user to the relevant tutorial page.
 out.println("You have been logged on to Enterprise.");
 response.sendRedirect (redirectURL);
Thank You for your help

// Retrieve the parameters that the user entered into the logon fields.
 user name and password come from here from the above html form into the jsp here. Ted Is this what you are asking for where does the username and password come from
 String username = request.getParameter("user");
 String password = request.getParameter("pass");

 IEnterpriseSession enterpriseSession = null;
 Exception failure = null;
 boolean loggedIn = true;
 String redirectURL = null;
 ISessionMgr sessionMgr = null;
 // If no session already exists, logon using the specified parameters.
 if (enterpriseSession == null){
 try{
 // Attempt logon. Create an Enterprise session manager object.
 sessionMgr = CrystalEnterprise.getSessionMgr();
 // Log on to BusinessObjects Enterprise
 enterpriseSession = sessionMgr.logon(username, password, "appserver.abc.com", "secEnterprise");
 System.out.println("line61");
 }catch (Exception error){
 loggedIn = false;
 failure = error;
 if (!loggedIn){
 // If the login failed, redirect the user to the start page.
 return;
 }else{ this code is in my first post

Crystal report server2008 (XI R2): CMC session timeout error

HI
Crystal report server2008 (XI R2): CMC session timeout error
Accessing folders, scheduling reporting or running reports are working fine with Central Management Console (CMC) within the Crystal report server or accessing CMC within VPN machine. But when CMC is accessed through browser from client desktop i.e through proxy URL, users are not able to access folder or personal folders to view any reports even admin user is not able to access folders. When users try to access folder or personal folders it gives session-timeout errors. Within less than a 1 or 2 minutes it is showing session timeout error. Appreciates any one help on this quickly.
Regards,
Patrick Raths

Please post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
BTW., if thi is an important issue, I'd recommend creating a phone case.
Ludek
Edited by: Ludek Uher on Aug 11, 2010 1:58 PM

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

Solaris 10 gnome session manager crashes on login

There are two Solaris 10 servers at work that I cannot log into. At the login screen I choose Options --> Session --> Java Desktop System, Release 3
and then try to log in. I get the following error message:
"The GNOME session manager (process XXXXX) has crashed due to a fatal error. (Segmentation Fault). When you close this dialog, all applications will close and your session will exit. Please save all your files before closing this dialog."
I was able to find one post on this error using google. It said that the user solved this problem by editing the LD_LIBRARY_PATH variable by moving /usr/local/lib to the beginning of the line. This didn't fix my problem. I logged in via ssh and double checked that the LD_LIBRARY_PATH change had saved.
Other people can log into the server just fine. Just not me. I even completely wiped my home directory. Anybody know where I can find a fix for this?

Just discovered that if one of the working users logs completely out, they cannot log back in. So this error affects everybody.

Session Manager Error

Similar Messages

Maybe you are looking for