Sessions getting created after tablespace is offline

Hi all
I am facing a situation where if I make SYSAUX tablespace offline, still session count keeps on increasing.
Is that something expected?
Thanks

Thank you for your help.
These are steps that can be done to reproduce the issue in Enterprise Edition
SQL> select username,count(*) from v$session group by username;
USERNAME COUNT(*)
19
SYSMAN 35
DBSNMP 3
SYS 1
SQL> alter tablespace MGMT_TABLESPACE offline;
Tablespace altered.
Wait for some time
Re run the query..
SQL> select username,count(*) from v$session group by username;
USERNAME COUNT(*)
19
SYSMAN 66
DBSNMP 3
SYS 1
Hope it makes the issue clear.
Thank you for your help.

Similar Messages

New Session getting created(!)

          Hi All,
          I am facing a wierd behavior. I have an application with a
          login page(jsp). User submits his authentication details,
          is authenticated in a servlet, and some of his information is
          put in the session. Later he gets "redirected" to another
          jsp(just like any other app).
          This is working fine most of the times. But randomly it is
          so happening that the jsp being redirected to does not get the
          values put in the session.
          Some more debugging showed that from login jsp to servlet, same
          session continued till the very last step(just before
          redirection). Just after
          response.sendRedirect(response.encodeRedirectURL(url));
          a new session gets created(!!). Any pointers?
          Please note I am testing all this out in a browser which is
          accepting cookies.


Urgent!!
          We have the same problem on WLS5.1.
          Any suggestions would be fine
          Regards
          Osman
          "Bijay Kumar" <[email protected]> schrieb im Newsbeitrag
          news:3d0ed20f$[email protected]..
          >
          > Hi All,
          > I am facing a wierd behavior. I have an application with a
          > login page(jsp). User submits his authentication details,
          > is authenticated in a servlet, and some of his information is
          > put in the session. Later he gets "redirected" to another
          > jsp(just like any other app).
          >
          > This is working fine most of the times. But randomly it is
          > so happening that the jsp being redirected to does not get the
          > values put in the session.
          >
          > Some more debugging showed that from login jsp to servlet, same
          > session continued till the very last step(just before
          > redirection). Just after
          > response.sendRedirect(response.encodeRedirectURL(url));
          > a new session gets created(!!). Any pointers?
          >
          > Please note I am testing all this out in a browser which is
          > accepting cookies.
          >

IDOCS get created After one day?

Hello all,
the outbound idocs are get created after one day delay,
After uploading the materials the idocs have to generated through program RBDMIDOC and need to be posted immediately .
RBDMIDOC-scheduled at 10 mints .
but in our scenario the idocs are generated after one day delay..
what could be the reason?.
it's urgent .
Warm regards
Nandan
Edited by: Nandan ND on Feb 19, 2008 12:47 PM
Edited by: Nandan ND on Feb 19, 2008 1:35 PM
Edited by: Nandan ND on Feb 19, 2008 1:36 PM

Hi,
Check whether program RBDMIDOC is scheduled only once? If it is running only once then you this will happen.
And also schedule the job to execute only after your upload process is over.
Regards,
Ashok

About Resource Object which get created after careting GTC flat file conn.

Hi,
I have one query:
Whenever we create GTC for flat file reconciilation it creates new RO & new Process definition etc.
So in this case in OIM there are two ROs one for Proviioning process and another which get created after we create GTC for reconciilation.
But I don't want two seperate RO for single resource.
what we can do?

Hi
I'm using single host implementation OWB10g/Oracle on same host.
My flat file location is
c:\source\dept.txt
Pl tell me if I have to save the same file on any particular location for OWB to read.
Implementation in OWB10g
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Can not read data from file
c:\souredept.txt
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Thx in advance

Session gets created for every request.

Hi ,
I have two servlets where i set a object in the session in one servlet say servlet1.java and get in another servlet say servlet2.java.
When i pass my session object from servlet1 to servlet 2 , servlet2 is supposed to get the arrtibute , but its always gives me a null value.
I found out that a new session is getting created every time when i try to access servlet2.
I tried to print the session object , and it clearly tells me that the object is differet from the one i set.
Can anyone let me know why is this happening and how do i solve this .
This happens for me in weblogic 8.1 setup.
In my JBOSS set up with the same code it works fine.
Thanks in advance.

Sasikanth,
Pardon me if I am stating the obvious, but according to your description the problem is with WebLogic. So did you try a WebLogic specific forum?
Good Luck,
Avi.

Backend PO not getting created after EHP6 upgrade

Hi Friends,
Recently there was an SAP patch upgrade in ECC 6.0 and after that while creating the shopping cart the PO is created, but it is not transferring to ECC. We are using the extended classic scenario SAP SRM 7.0. I had checked almost everything right from debugging still clueless. even checked the forums but still the issue is not resolved. Any hints of how to proceed now.
Regards,
Ramesh.

When We are creating shopping cart, system will create Po in back end based on our BAPI.
Check whether BAPI is running properly or not. You are updated new version EHP6 , I hope you should do required configuration. Try in development server whether Po are creating backend or not.
I hope you should check all the configuration in backend system i.e in ECC and SRM side.
Do again batch running and check whether back ground job getting created or not.

Bean in Session getting inaccessible after x minutes

Hi,
we are currently devloping iViews (JspDynPapes) for EP6 SP2.
We have several iViews which put bean in the iPortalComponentSession and the HttpSession.
We have the following problem:
An iView stores information in a bean and put it into session to be displayed in a table on a JSP. Now,
if the user waits for x minutes (more than 15!) and he triggers an server side event of the ivew, the iView tries to get the bean back from session. But, if the user has done nothing for a certain period, the bean can not be accessed in that session. This raises an NullPointerException. The bean seems to be disappeared or invalid.
Do beans stored in a session get invalid or deleted after a certin period? Can this period be customized?
Thanks for your help,
Maik

Hi Maik,
not the beans stored in the session become invalid but the session itself! For session timeout settings see Anyway to Setting Portal Timeout
In addition, see http://java.sun.com/products/servlet/2.3/javadoc/javax/servlet/http/HttpSession.html#setMaxInactiveInterval(int) (which overrides the servlet-container settings for this specific session).
Hope it helps
Detlev

Movemailbox issue: new empty calendar folder gets created after mailbox move

Hi,
when doing mailbox moves between Exchange 2010 and Exchange 2013 (CU3 and SP1) and also between two Exchange 2013 SP1 servers we experience the following issue:
sometimes a new empty default calendar folder is being created after the mailboxmove completes. Out of 230 moved mailboxes 6 mailboxes experienced this issue. For some reason the existing calendar folder is changed to a user created folder and a new
calendar folder gets being created. This causes some panic by the affected users, since they suddenly notice that their calendar is completely empty. The free/busy information other people see is also empty because they also see the empty calendar.
To correct the issue I have to manually move the items from the original calendar folder to the newly created calendar folder.
Any idea what might cause this? I don't have reproduction steps, it just happens at random during the mailbox move. The moverequest completes succesfully, no errors are reported and the movereport also doesn't contain any clues.
Frank.

But outlook wasn't running, so outlook couldn't have created the new calendar folder. I did the mailbox move out of office hours. Right after the mailbox move completed I ran the 'get-mailboxfolderstatistics' cmdlet. When looking at the output I search
for 'user created' calendar folders called 'Calendar'. The mailboxes that were affected also had another 'Calendar' folder of the type 'Calendar'. This is the newly created folder. So the mailbox contains two folders called 'Calendar' after the move. Although
I can't reproduce it, I'm able to detect when it happened by looking at the output of the above cmd-let.

EWA session not created after refresh_session in SDCCN

Hi All,
I have configured EWA in our SolMan 7.1 for our managed system SAP BW 7.0, and to test it, I've been trying to create an adhoc EWA report manually. However, after the completion of refresh_session tasks in the managed system's SDCCN, no EWA session is being created.
I have already followed instructions in SAP Note 1769513 - EWA not generated - session data is overdue (red flag status), but I'm still stuck with this error.
Please advise.
Thanks.

Hi,
You are using solution manager 7.1, so here are couple on KBAs which can help you to get the EWAs.
1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1
1924199 - EarlyWatch Alert Management SP10+
Also follow the recommendations of RTCCTOOL.
To generate an Ad-hoc EWA, yo can look into this wiki.
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
Further, to understand and troubleshoot, please read the EWA workflow
The EWA workflow - a closer look - Solution Manager - SCN Wiki
I hope, all this should help you in fixing your issue.
Regards

Firefox history, login sessions gets deleted after system shutdown

I have synced my browser with my gmail account. After browsing and closing/restarting the system, the Firefox starts with only the bookmarks, form history from the sync account and forgets everything I have done currently.
-> Done creating a new profile
-> Downgrading/Reinstalling the browser
-> Removing any antivirus that may cause history delete
-> Syncing n number of times
Still it doesn't take any new history after shutdown.
What may be the solution?

You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
You can check the settings for "Clear history when Firefox closes".
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-recent-browsing-search-and-download-history
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.

Weblogic Domain not getting created in SOA Suite 11g R2

I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?

Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan

Weblogic servers directory not getting created in the domain directory

Hi
I installed weblogic 12c(12.1.1.0) and then ran the config.sh to create the domain/managed servers directories.
After the config.sh completely ran I am not seeing the servers directory under the domain directory. All other directories like config, bin are present under the domains directory.
If anyone can let me know for weblogic-12c if they have come across such a issue during installation/configuration please reply to this thread.
Thanks
BharanB

Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan

Integration with EWM-Inspection lot not getting created

Hi,
Inspection lot not getting created after GR is done.
The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
Can anyone please tell me the necesaary check points and integeration steps between WM and QM in this case .
Thanks in advance.......

Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn

EREC: Multipal IDOC are getting created in receiver system for one IDOC

Hello Experts,
I ran in to one wearied issue in IDOC creation in Receiver system. I am running PFAL in sender system for only Person but 10 IDOC are getting created in receiver system. I don't know why is this happening.
This issue started popping up after we ran RBDAPP01-Inbound Processing of IDocs Ready for Transfer. We ran this to change IDOC to 53 status. Now I don't know what went wrong but Perner distribution is behaving
Appreciate your help.
Regards,
Krishna Bidwai
Losangeles USA.
818 527 0204.

Yes, employee is getting created after adding 0003 into the filter, but can u please answer my another question, i.e. PERNR in sender and receiver system should be same.
So in Receiver system (ECC) do i need to maintain external number range for PERNR?
Thanks

Silent Installation - Respond file not getting created !!!

Hi,
I am trying to create a respond file by running the installation as follows
./runInstaller -ignoreSysPrereqs -record -destinationFile /backup/ORA_DOWNLOADS/9201.rsp
ignoreSysPrereqs is used because we have Sun Solaris 5.10 which is not in oraparam.ini.
I am installing 9.2.0.1 Please do not ask why 9.2.0.1 now.
Now the problem is my respond file is not getting created when I run the install. Does the respond file gets created after the installation is complete? I do not want to end up doing installation at one server without the respond file.
Please help.
Thanks,
Ankit.

Hm, you might be hitting a bug. Need to check my archive of historic Oracle events (means, I'll get back when I have looked through my notes in a few hours or more).

Sessions getting created after tablespace is offline

Similar Messages

Maybe you are looking for