Set up can not detect any Sound Blaster L

When trying to update my driver I get the message that the system on my computor. However the Sound Blaster system is working fine. The reason for wanting to update the drivers is that I get a resourceconflict when trying to install a FireWire PCI-card.
Can any help me?
Best regards

Otterman wrote:
Hello, here is the result (without the Firewirecard installed)
Confilicts/sharing
I/O-port 0x00000000-0x00000CF7 PCI busI/O-port 0x00000000-0x00000CF7 DMA-styrenhet I/O-port 0x000003C0-0x000003DF Intel(R) 82865G\PE\P Processor to AGP Controller - 257I/O-port 0x000003C0-0x000003DF ALL-IN-WONDER 9800 SERIES Minnesadress 0xE8000000-0xF7FFFFFF Intel(R) 82865G\PE\P Processor to AGP Controller - 257Minnesadress 0xE8000000-0xF7FFFFFF ALL-IN-WONDER 9800 SERIES - Secondary IRQ 6 ALL-IN-WONDER 9800 SERIESIRQ 6 Intel(R) 8280EB USB Uni'versal Host Controller - 24D2IRQ 6 Intel(R) 8280EB USB Uni'versal Host Controller - 24DE IRQ 8 Intel(R) 8280EB USB Uni'versal Host Controller - 24D7IRQ 8 Intel(R) 8280EB Ultra ATA Storage Controllers Minnesadress 0xA0000-0xBFFFF PCI busMinnesadress 0xA0000-0xBFFFF Intel(R) 82865G\PE\P Processor to AGP Controller - 257Minnesadress 0xA0000-0xBFFFF ALL-IN-WONDER 9800 SERIES I/O-port 0x000003B0-0x000003BB Intel(R) 82865G\PE\P Processor to AGP Controller - 257I/O-port 0x000003B0-0x000003BB ALL-IN-WONDER 9800 SERIES IRQ use
IRQ 0 System timer OKIRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OKIRQ 3 Intel(R) 8280EB SMBus Controller - 24D3 OKIRQ 4 Kommunikationsport (COM) OKIRQ 6 Standarddiskettstyrenhet OKIRQ 8 System CMOS/real time clock OKIRQ 9 Microsoft ACPI-Compliant System OKIRQ 3 Numeric data processor OKIRQ 4 Prim?r IDE-kanal OKIRQ 5 Sekund?r IDE-kanal OKIRQ 6 ALL-IN-WONDER 9800 SERIES OKIRQ 6 Intel(R) 8280EB USB Uni'versal Host Controller - 24D2 OKIRQ 6 Intel(R) 8280EB USB Uni'versal Host Controller - 24DE OKIRQ 8 Intel(R) 8280EB USB Uni'versal Host Controller - 24D7 OKIRQ 8 Intel(R) 8280EB Ultra ATA Storage Controllers OKIRQ 9 Intel(R) 8280EB USB Uni'versal Host Controller - 24D4 OKIRQ 20 Intel(R) PRO/00 VE Network Connection OKIRQ 22 Creative SB Li've! series OKIRQ 23 Standard Enhanced PCI to USB Host Controller OK
Which motherboard do you have there (exact information, like as for an example "Asus a8r32 mvp deluxe" would be good, so I could dl the manual from manufacturers support pages)?
Is the conflict type of DMA, IRQ or I/O addrerss?
Does FW card conflict w/ SB Li've! only?
Have you looked BIOS settings like
Plug and Play Operating System --> enable
Plug and Play BIOS --> disable
Have you tried by installing the Li've! into another PCI slot (by the IRQ assigment table (normally showed in motherboard user's manual), you can see which recources (IRQ's) are shared w/ other devices/controllers/PCI slots)?
jutapa

Similar Messages

Setup could not detect any Sound Blaster Audigy card on your system

Hi from Barcelona!
I've a Soun Blaster Audigy card (Model: SB0090)
I tried to install the Audigy software and drivers from the original product CD but Setup was unable to find Augigy hardware and halted the installation!
"Setup could not detect any Sound Blaster card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this Setup program"
By the way. Manually the sound drivers can be installed working only front speakers of the 5. Creative system
I tried a clean installation of Windows XP and Windows 2000 PRO (reformatted the hard dri've) but Audigy install CD still could not find Audigy hardware.
I've changed the card to a different PCI slot with the same results!!! Damaged?
What is happening? I need a solution!! Many users have this problem to with other Sound Blaster cards and models...

ADSLNEW wrote:
It seems to be an important BUG of Creative Sound Blaster Audigy cards related with EEPROM!!!
Yes, indeed, that is my theory as well. After much ****hing and on-line research, it seems that this problem has been around since 2002. From Creative Labs point of view, it appears they view this as "pilot error" -- the user has installed the card in a system that is not fully compliant with the latest standards -- specifically Microsofts ACPI (configuration and power management). A wide variety of configurations and/or actions seem to cause the PCI subsystem ID in the Audigy EEPROM to be erroneously overwritten -- including certain older motherboards, certain older PCI cards, and perhaps other actions.
Once the subsystem ID in the EEPROM is overwritten and has garbage information, many or all of the Creative applications cease working and various sound problems can arise. Attempts to reinstall the driver or update to the latest driver consistently fail becuase of the dreaded "Setup could not detect any Sound Blaster Audigy card in your system..." error message.
There appear to be four fixes:
) Get a replacement Audigy card from Creative, but <EM>only</EM> after you perform their prescribed troubleshooting steps to prove that the card is indeed the source of the problem. Apparently, the steps include installing the card in another PC. Apparently, Creative in Europe is more willing to replace your card than Creative in the US. It's up to Creative Labs whether or not they issue you an RMA ("Return Material Authorization").
However, this fix will fail if the root causes of the EEPROM error are not corrected. Apparently, Creative Tech Support isn't always a foolproof source of guidance, so the burden is on you. The root cause MUST be corrected before the new card is installed, or the same problem will happen all over again. Eliminating the root cause may involve replacing your motherboard, replacing other PCI cards, or manual configuration (disabling ACPI).
2) Reprogramming the EEPROM. This is for advanced PC owners only, because it involves desoldering the EEPROM, programming it, and resoldering (and even lifting some pins to prevent reprogramming). There are instructions on how to do this posted in the German Creative Labs discussion board, by a Russian (!). I have links for those who are interested.
3) Removing the Creative drivers and software (using Clean Sweep procedures and third party utilities), updating again using Windows XP SP2, then physically moving the card to different PCI slots (multiple times if necessary), until ACPI Bios writes the proper information into the EEPROM. You can then reload the drivers.
Again, the root causes of the problem must be removed or your fix will only be temporary (a day or two). This solution also seems to be very dependent on the specifics of your system (motherboard, PCI cards, etc.).
4) Some people have had success in by-passing the step in the driver installation process where they check for the Audigy card subsystem ID, using a utility called CTZAPxx on the installation CD. Then then manually install each of the applications they need to use.
5) Use the open source driver from the kX Project (http://kxproject.lugosoft.com/index.php). This driver (and associated utilities) does not depend on the detailed configuration of the card (i.e. they don't check subsystem ID) and appear to work fine even with cards with corrupted EEPROM.
This driver is aimed primarily at computer music applications, and opens up the on-card signal processing capabilities. The downside is that the Audigy 2 ZS does not have all of it's capabilities supported <EM>yet </EM>(e.g. Dolby Digital decoding, S/PIF passthrough, possibly some game sound features, THX, 24-bit recording, support for Hyperthreading CPUs, etc.). But scanning over the discussion boards, the user community seems to be MUCH happier with the performance and support associated with these drivers than with Creative's.
This is the direction I'm going. I'm not a big gamer and I don't really care about the latest in home theater audio performance. Basic 5. surround sound is all I care about, and I'm much more interested in computer music capabilities.
I have also lost faith in Creative Labs as a vendor to provide the support I want and need going forward. Just imagine if the Creative Labs were running the Space Shuttle program :smileysurprised:.

::"setup could not detect any sound blaster audigy on your system

Hej!
Har ominstallerat WinXP PRO och tappade bort ljudet helt! Datorn kan se ( via Windows update) att det ?ren ljudenhet installerad men kan inte hitta drivrutiner, gick d?refter in p? er sida och provade f?rst med manuell nedladdning men d? kommer ett felmed upp som lyderkonstigt t?nkte jag..Provade erat eget autodetect program men d?r hittade programmet r?tt!!
Produkter i ditt system:
Sound Blaster Audigy 2 ZS
Laddade ner och k?rde programmet och d? f?r jag medd IGEN!!....
Allts?:
Era program hittar mitt kort f?r att sedan INTE hitta mitt kort...
HJ?LP

mrbergman wrote:
Hej!
Har ominstallerat WinXP PRO och tappade bort ljudet helt! Datorn kan se ( via Windows update) att det ?ren ljudenhet installerad men kan inte hitta drivrutiner, gick d?refter in p? er sida och provade f?rst med manuell nedladdning men d? kommer ett felmed upp som lyder:"setup could not detect any sound blaster audigy on your system"..konstigt t?nkte jag..Provade erat eget autodetect program men d?r hittade programmet r?tt!!
Produkter i ditt system:
Sound Blaster Audigy 2 ZS
Laddade ner och k?rde programmet och d? f?r jag medd::"setup could not detect any sound blaster audigy on your system".. IGEN!!....
Allts?:
Era program hittar mitt kort f?r att sedan INTE hitta mitt kort...
HJ?LP
Hejssan
I think you understand english good enough (som ni alla svenskar brukar g?ra (b?ttre ?n vi finskar i alla fall)) so I just give a link to another thread on this forum.
This issue you're having, is quite common for Creative Audigy carrds (perhaps with OEM models mostly) if you just search this forum.
You can use those instructions to get some drivers installed to your card. Install drivers first and then all the Creative software you need.
You need WinRar being installed into your system to get driver package extracted. You can download it from http://www.winrar.de/edownload/winrar.html
Here is the link
.jtp

Setup could not detect any Sound Blaster Audigy 2 on your Sys

Here's the deal. I have used my Soundblaster Audigy 2 Platinum without incedent for a long time with the following box:
Asus A7V333
XP 800
.5 GB DDR 2700
I changed cases, but all of the components remained the same. Everything else went like clockwork, but no Audigy.
So I did a clean and replace of the drivers, however, I had no Audigy CD. I ordered the CD from Creative, but it looks to be a CD for the Audigy 2 XS...will this work for the Audigy 2 Platinum?
So when I go to run the CD, I get the following error:
Setup could not detect any Sound Blaster Audigy on your system.
Please ensure that your Sound Blaster Hardware is properly installed before running this Setup program
Setup will now exit.
I didn't change slots and the IRQ is still the same.
I can provide any additional documentation, i.e. screen shots of device manager, et al. to anyone interested in helping.
Also, if you li've in Chicago, I will get you drunk.
I am so irritated with this thing... I remember it being a pain in the @$$ to install the first time, but not like this.
Cheers,
-rob

Okay I ended up fixing this problem myself seeing as a lot of these forum topics just come to a dead end with no real resolution.
Let's get 'Creative' ...
I removed the reg entry hkey_local_machine/software/creative tech, removed all drivers, programs, and anything that even smelt faintly of creative.
Just to make sure I ran the CTZAPXX.exe on the cd and removed drivers again there also.
Then upon a swift reboot I used CTZAPXX.exe to install the drivers, ran the cd, unchecking the option at the bottom of the 'custom' install list to install windows drivers (as it had already been done)
Now I'm back in business
Though, all through the ages I've never had a creative soundcard, which hasn't given me trouble at some stage, man I even have shameful memories of my AWE64... Lift your game creative, you've got a great product line, just a pity the shoddy drivers sometimes let them down.
This post may be a little outdated, but it's really intended for all you googlers out there I really hope this fixes your problem!

Set up from creative down load does not detect any sound blaster audigy mess

I have a sound blaster audigy with no installation cd. I installed the card to download the drivers. The detection software on the site said there was no creative product installed.
I downloaded the web update file and saved to my desk top. Ran the file after closinging all apps and got a message that there was no audigy detected. Reinstalled the card, same, did it again in another pci slot.
Tried finding a driver in xp, found one for soundblaster. No sound at all with this xp driver. I do not have intergrated sound on the abit k7rsa board. How do you install the driver if the set up program stops you because it does not see the device, and with no install cd? Thanks for any help.
Tony

I have the same problem. About a year ago I threw out all my driver cd's because they were really piling up and i figured i'd never need them because I've been able to download all the driver's i've ever needed from company websites.
NOT SO with Creative.
I have the Sound Blaster Audigy 2 Platinum (the one with the ports for the front of the computer). I recently had to reinstall my OS. I got the soundcard to work, but all the optional components I had before (like the ability to use the remote control to control sound, and the EAX console etc) are gone. I tried to download these components from the website (it's really hard to tell which is which, so i downloaded them all). They will NOT install! I keep getting the error message "Setup did not detect required components, Setup will exit" on all the download software.
This is extremely frustrating because I'm unable to setup the speakers properly (windows speaker settings don't really work).
I did manage to do the automatic update thing, but it only updates the core drivers.
PLEASE HELP!
I paid $200 bucks for this card (granted, that was a couple years ago), so I should be able to at least download the same software that came with the product!
Please have a professional (not an engineer without user interface experience) design the download area too...it is extremely difficult to understand what the individual components really do! At the very least, when you download them...they should work!
Thanks.

I can not hear any sound on my laptop .

i can not hear any sound on my laptop .pls help but i can see icon of sound and i already reinstall its hp pavilion dv6

HI. =)
All you have to do is update your sound/audio driver. (especialy if you just got a BIOS update, if you haven't, just proceed)
first, make sure nothin's attached to your laptop.
go to hp.com -> support & drivers - drivers & software - (put in your product name/number - you can find that at the bottom of your laptop) - at the drop down, select widows 64 bit (mostly) then hit next - at step 2, 'SELECT A DOWNLOAD', choose driver - audio - click the first blue link and hit save - after saving, your laptop will prompt you to run it. hit run.
then your laptop will reset, and it should produce sound.
**your kudos will be appreciated.

Macbook can not detect any keyboards or mouses

My macbook can't detect any keyboards or mouses on the USB-port. USB-sticks or disks are no problem.
A week ago there was no problem connecting everything. So today I used a USB-hub to connect my devices and mybe this was the problem.
After connecting, the mac can't decect any keyboards or mouses also without using the hub.
I tried:
restart
battery removal
PRAM reset
SMC reset
But always no result.
So what can help?
Tanks.

I believe it has to do with my Airport Utility on my MacBook (since the problem occers since I upgraded to the latest version). Is there any way to reinstall this App?
EDIT: Sorry, I believe I need to read this thread http://discussions.apple.com/thread.jspa?threadID=2644274&tstart=0
Message was edited by: Jaap74

I can not get any sound on my laptop. the volume settings are on but no sound will play? help

I can not hear anything but the picture plays fine.

HI. =)
All you have to do is update your sound/audio driver. (especialy if you just got a BIOS update, if you haven't, just proceed)
first, make sure nothin's attached to your laptop.
go to hp.com -> support & drivers - drivers & software - (put in your product name/number - you can find that at the bottom of your laptop) - at the drop down, select widows 64 bit (mostly) then hit next - at step 2, 'SELECT A DOWNLOAD', choose driver - audio - click the first blue link and hit save - after saving, your laptop will prompt you to run it. hit run.
then your laptop will reset, and it should produce sound.
**your kudos will be appreciated.

Setup could nod detect any Sound Blaster Audigy 2 on your sys

I want update my Sound Blaster Audigy 2 driver. I click on Software AutoUpdate, system show me version my driver - DR release .84., than offered update to - Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55, then download file SBA2_PCWDRV_LB__84_55-R.exe. I run file and see the message ".
please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
Setup will now exit". How can i fix it's

You might find some help here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=44974

I can not get any sound while playing Flash content in IE, FireFox, or Chrome

I have Windows 7, 64 bit. I have ie 8, I think it is 32 bit, ("About ie" does not indicate 64bit).
I have unistalled Adobe Flash and re-installed, I have verified that I have the REG files under System32/ and SysWOW64/ (or whatever)...
I installed Chrome after I have having this problem. I have plugged my speakers into both the AudioJack in the back of machine, as well as in the headphone Jack. I have tried just using headphones...
I have gone to the 'configuration site' I have deleted Windows temporary files, I have deleted i.e. and FireFox files.
I have checked multimedia setting in ie advanced tabs.
I have checked the sound volume in the 'Mixer'
Sound works in my broser for Quicktime applications (like video on apples website). Sound works everywhere else...playing music, Windows startup, speaker test, etc...
I have worked on this for hours!!! Please help.
Thanks!
-Bob

Below are the Steps from:
http://www.codecguide.com/fix_for_flash_sound_problems.htm
And my results:
Flash stores its files in a temporary files folder. A corrupt download can cause the sound problems.
Delete the following folders:
C:\Documents and Settings\%UserName%\Application Data\Adobe\Flash Player
C:\Documents and Settings\%UserName%\Application Data\Macromedia\Flash Player
Actually…Note that point 1 sould be %APPDATA%\Adobe\Flash Player%APPDATA%\Macromedia\Flash Player
(Thanks willener)
I completed this – No help
Empty your temporary internet files.
Internet Explorer: Tools -> Internet Options
Firefox: Tools -> Clear Private Data
Opera: Tools -> Delete Private Data
I completed this – No help
Empty your temporary files folder.
Use this command to empty your temporary files folder:
Start -> Run -> RMDIR /S /Q "%TEMP%"
I completed this – No help
Install the latest version of the Flash plugin. You can download it HERE. If you have problems upgrading the plugin, then uninstall your existing version first with this tool. Close your browser(s) before you run the uninstall tool.
I completed this – No help
Run the K-Lite Codec Tweak Tool. Near the top you should see an option to fix the sound (Midi, WaveOut). Select that and press Next. If the option is grayed out, then that particular registry fix is not needed. This fix will restore a missing "wavemapper" registry key.
I completed this – No help
Go to the Flash Player Settings Manager website. Click HERE.
Check the box called "Allow third-party Flash content to store data on your computer."
I completed this – No help
Go to the Flash Player Settings Manager website. Click HERE.
Click on the button to remove the data that the Flash plugins has stored for websites that you have visited.
I completed this – No help
Check if your sound device settings are correct:
Start -> Settings -> Control Panel -> Sound and Audio Devices -> Audio
This is not correct instructions for Windows 7.
Obviously I have checked sound settings in RealTek Audio manger several times. As well as in the mixer, and in the Internet Option Settings (Advanced Multimedia). I checked setting under “Hardware and Sound” there is nothing there that has any effect.
If you have QuickTime installed, then go to the QuickTime control panel. On the Audio tab, set "Default Music Synthesizer" to "General MIDI".
On the Advanced tab, disable "Enable playback of Adobe Flash tracks".
On the browser tab, click on "MIME Settings". Under "Miscellaneous", make sure "Flash media" is unchecked.
These are not accurate options on my computer (Quicktime 7.6.9).
Under Default Music Synthesizer. There is no “general MIDI” only option is “Quicktime Music Synthesizer”
Advanced Tab: “Enable playback of Adobe Flash tracks".is not an option
Browser Tab: "Flash media" is not listed under MIME Settings (There is no Miscellaneous)
Check if the file msacm32.drv is present in the C:\Windows\system32 folder. If not, copy it from another PC (that has the same version of Windows) and place the file in the system32 folder. If you are using a 64-bit version of Windows, then the file should be present in the C:\Windows\SysWOW64 folder.
Verified these files are here.
If you are also having sound problems with other applications, then re-installing your audio drivers might solve the problem.
I am not having problems with other audio applications, but I still completed this – No help

I can not get any sound from my Iphone 4. Everybody is calling me but the ringers does not work ...

My phone does nor ring!!! Everybody is calling me and the ringer does nor worlk!!! Any sugestions?

If it isn't on silent the speakers may have blown, if you live in the UK, you can visit the nearest apple shop and they should do a direct swap, you can also try this in other countries however I am not certain they will swap it.

I can not get any sounds out of my Macbook Air

- Basically because it seems like there are no internal speakers when I search in 'sounds'. Anyone, please?

Sounds like either the internal speaker volume is muted or the micro switch inside the headphone jack is stuck and the computer thinks something is still plugged in.
1. Check the sound preferences and see if you can select and/or unmute the internal speakers?
2. If not, try plugging in gently jiggling and then unplugging the headphones to see if you can unstick the micro switch?
3. If not, contact your local AASP and make a service appointment.

Setup Could Detect Any Sound Blaster Audigy 2 On Your Sys

Help,
I am trying to install a new SB Audigy 2 sound card into my computer.
MB is Abit NF7-S. OS is XP Pro. The sound card is producing audio but when I try to Install the Audigy drivers I get the message
There are no Yellowed componets listed on device manager.
Any Ideas??

~20 % of subjects here are ~same withh yours.
Try to search st.
.jtp

Setup Couldn't detect any Sound Blaster Audigy 2 on your sys

Hello...yap that is the message that my system shows when I try 2 instal my just bought Audigy 2, when I instal the driver from the Creative CD driver installation!!!
I've tried any possible combination..but nothing works!!! I think I'm about to change my opinion about creative products... (
If someone have/had the same problem...please tell me how it can be done!
Thank you...and forgive my English!

I have the same problem with almoust every driver update from Creative! I don?t know why it happens or why they don?t fix it, but i do know that many have this problem!!
Solution:
Extract the update "exe" file to some folder of you?re choosing! Use a program like "total commander" or someone like that to extract the file! Then go to the folder where you extractet the files, go in the "drivers" folder and click on the "setup.exe" file!
Then it ask for confirmation, just say yes and it should install alright!!
Hope you understood my explanation!

I can not hear any sound from my i pad

there is no sound while I use my ipad

I had the same problem with my iPad.I sent it to a service provider who changed the speaker.Still the problem persited.This is what I did and the sound came back:
1)start playing music from the iPad.You will notice that there is NO SOUND.
2)keep the music playing WITHOUT the sound.
3)connect your earphones and you will hear the music on the earphones!
4)whilst the music is playing,swipe up and reveal the menu at botton of page.
scroll to far left of the bottom menu.
5)You will notice that the speaker button on the left has a line across it indicating that the main speaker is disabled.Tap the icon to remove the line across the speaker icon.
6)While the music is still playing ,remove the earphone jack and the music will continue to play on the iPad speakers.It looks like the iPad speaker is disabled whenever the earphone jack is inserted.It is supposed to re-connect when the earphone jack is removed but for some reason it remains disabled!
All the above assumes that you have done all the other issues of making sure that your volume buttons have not been muted on the external switch.
Good bye.
Sala kuhle.
Shalom.
שלום.

Set up can not detect any Sound Blaster L

Similar Messages

Maybe you are looking for