Set up Xorg inside guest VirtualBox
I just can't seem to make it work.
These are the last lines of the output after I try to launch startx as root:
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 27 23:33:07 2008
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module "ddc" already built-in
expected kysym, got XF86KbdLightOnOff: line 70 of pc
expected kysym, got XF86KbdBrightnessDown: line 71 of pc
expected kysym, got XF86KbdBrightnessUp: line 72 of pc
expected kysym, got XF86KbdLightOnOff: line 70 of pc
expected kysym, got XF86KbdBrightnessDown: line 71 of pc
expected kysym, got XF86KbdBrightnessUp: line 72 of pc
waiting for X server to shut down FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing.
I commented out the "load type1" line in xorg.conf (what is type1 module anyway?)
and still it won't run. This is the only error in the xorg logfile (EE).
Running grep '(WW)' /var/log/Xorg.0.log produces this:
(WW) The directory "/usr/share/fonts/PEX" does not exist.
(WW) The directory "/usr/share/fonts/western" does not exist.
(WW) The directory "/usr/share/fonts/decoratives" does not exist.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) Warning, couldn't open module type1
(WW) System lacks support for changing MTRRs
(WW) Option XkbVariant requires an string value
I am running arch as guest OS under winxp using Virtualbox.
I have installed Xorg and KDE using their Wiki pages on the site.
Help!
p.s. is there a way to copy an entire file or text segmant from the guest os to the host os, it's just annoying to type it all manually each time
Last edited by WickedZebra (2008-04-27 21:52:07)
As for getting X to work, it seems you have none of the X fonts installed. Use the metapackage xorg (pacman -S xorg) to get every part of X you need.
About the files? If you're using proprietary VirtualBox I believe there's a shared folder option, it's not present in OSE (which I use).
Similar Messages
-
How can I set up password-protected Guest account
Hi everyone
I need to set up password-protected guest account. The aim is to get:
a) an account with password. So only authorized person can use it.
b) all changes in this account should be overwritten at log-off, just like Guest account behaves.
So I need either to find a way to set password for Guest, either create a 'normal' account and somehow automate it self-cleaning at logoff.
I tried to run terminal and use
sudo su
passwd Guest
[entering password 123]
Afterwards I can't login as Guest at all. System doesn't ask for a password, nor logs me in.
Thx for any helpThis question was asked 2 years ago and still hasn't been answered.
If there is not a way to add a password to guest account, what is the script that get's executed when the Guest account log's off? I can execute that on an account that I create called 'localGuest' or something like that.
I have an enterprising member of my family who has figured out that my computer is exempt from the network curfew and they are using Guest to bypass that. I have since disabled guest; however, I do like using the fresh guest environment to test software development. -
What is the need for setting property data inside the JMSMesage
Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties. -
Setting two JTextFields inside JTable cell
hi,
I am really stick trying to figure out how to set two cells inside a JTable cell. This needs to be done because if there is a value already inside the cell then i want to drop another value - this new value should be displayed inside another cell but along with the other value already in the cell.
I assume that i would need to create two JTextFields.
But can anyone help me further please.That should be a simple issue of customizing table cell editor and renderer.
See tutorials. -
Can I set up separate, restricted guest access?
Just got my new Airport Time Capsule. It's it possible to set up a second guest access to the wireless network?
Yes, if you have a simple modem......not a modem/router or gateway type of device.....often provided to customers by Internet Service Providers.
We can can probably give you a good idea of whether your modem will work or not in this type of setup, if you can provide the make and model number of the device that you call your "modem". -
Setting the values inside xml file in xmlparsing
Hi,
Iu2019ve an xml file without containing any values inside the tags. I need to get the values from the text file and set the values inside the xml file. When I try to set the string variable inside the setValueNode() using DOM parser, itu2019s not setting any values inside the xml file.
Please help me on this..
Regards
VineelaHi,
I am doing conversion from EDIFACT format to xml format.
I am writing this code using core java. So I am using xmlparsing to convert my data. Iu2019ve one Hash table with me. I need to get the values from there and populate those values into xml file.
Regards
Vineela -
[Solved] Need help setting up Xorg on a netbook
I am in the process of setting up a Arch install on my Netbook and having problems with setting up Xorg. My system has a VIA CX700/VX700 unichrome pro graphics card, I installed the xf86-video-openchrome driver and loaded it. When trying to use Xorg with auto detection it seems like the vsync is off. Here is the Xorg.0.log file that is created. When I ran Xorg -configure the xorg.conf file generated didn't list any possible resolutions other than 0x0.
Last edited by vendion (2010-10-30 04:25:31).:B:. wrote:How does it work without any xorg.conf?
What do you mean, sorry I don't quite understand your question? The reason I tried without a xorg.conf file is in hopes that xorg and udev, or hal although I think that was replaced in favor of udev in the recent Xorg update IIRC, will be able to correctly detect my hardware and generate sane settings by default, this method worked fine on my desktops, but something about ether the graphics card, as stated in my original post a VIA CX700/VX700 unichrome pro or the 10 inch screen is throwing Xorg off. When I tried running the Xorg -configure and test the xorg.conf file it generated it did the same thing. I don't necessarily have to have X11 working through autoconfig having a xorg.conf file does not bother me as long as I can get it working. -
How to set widescreen for the guest OS (Oracle Linux 5) in Oracle VM 4.1.12
Hi all
I have got a concert about how to set the guest system(Oracle Linux5) to use widescreen? appreciate whatever you can help!
Thanks,You're looking for the VirtualBox forums. https://forums.virtualbox.org/
This forum is for discussion of Oracle VM Server. -
How to access the apps server inside guest from host.
my setup is
windows 7 - host
OEL 5 - virtualbox guest
i have it setup with bridged networking with static IP 192.168.1.91.
my virtualbox guest is running oracle ebs 12. i can access from firefox inside the guest the url http://xt12:8000
i can ping the guest ip from host .
however when i try to open the url(http://192.168.1.91:8000) from Internet Explorer browser inside the host it do not open.
appreciate any suggestion.
thanks in advance.
-Kartuser12046749 wrote:
however when i try to open the url(http://192.168.1.91:8000) from Internet Explorer browser inside the host it do not open.
appreciate any suggestion.Check iptables inside the guest: a default Oracle Linux install has the firewall enabled, which will block inbound connections. -
How to set error message inside the loop...module pool
Dear all,
Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.RIf i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix. "Here the sy tabix have the value of the read table.
* Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt -
Error Setting Environment Variable inside Listner.ora
Hi,
I am trying to set an environment variable inside listner.ora as follows
(ENVS="EXTPROC_DLLS=ANY,LD_LIBRARY_PATH=/opt/app/oracle/product/9.2/lib32:/opt/app/oracle/product/9.2/network/lib32:/usr/lib:/usr/X11R6:/usr/dt/lib,LIBPATH=/opt/app/oracle/product/9.2/lib32,MQSERVER=SYSTEM.DEF.SVRCONN/TCP/ashsou03.mcilink.com(4444)")
but every time I try to start the listner it gives me the following error:
TNS-01155: Incorrectly specified SID_LIST_LISTENER parameter in LISTENER.ORA
NL-00303: syntax error in NV string
I think that the parenthses, (4444), in the MQSERVER value is causing this. Any ideas on how I can configure it?Hi
Very many thanks for ur solution.. i actually hadset the environment variables spacce..but when i execute the autoexec.bat file i dont get any error(out of env space)..but when i run the startup.bat file i get from the command prompt, i get the foll error.
This is my Autoexec.bat
SET JAVA_HOME=D:\Jkit\bin
SET CATALINA_HOME=D:\tomcat\jakarta-tomcat-4.1.29\bin
SET PATH=D:\Jkit\bin;C:\WINDOWS;C:\WINDOWS\COMMAND;
SET PATH=%PATH%;C:\PROGRA~1\COMMON~1\AUTODE~1;
THE FOLLOWING IS THE ERROR I GET WHEN I RUN STARTUP.BAT UNDER TOMCAT'S BIN UNDER THE COMMAND PROMPT
D:\tomcat\jakarta-tomcat-4.1.29\bin>startup
Syntax error
Out of environment space
Out of environment space
Out of environment space
Using CATALINA_BASE: D:\tomcat\jakarta-tomcat-4.1.29
Using CATALINA_HOME: D:\tomcat\jakarta-tomcat-4.1.29
Using CATALINA_TMPDIR: D:\tomcat\jakarta-tomcat-4.1.29\temp
Using JAVA_HOME: D:\Jkit
Out of environment space
Out of environment space
Invalid switch - -DJAVA.ENDORSED.DIRS=D:\TOMCAT\JAKARTA-TOMCAT-4.1.29\COMMON\ENDORSED
I even set JAVA_HOME AND CATALINE_HOME to the \bin dir respectively..
still i get the same error
As given under the tomcat installation documentation (RUNNING.txt), i set the space for environment space under the Memory tab, for startup and shutdown.bat files, it creates a shortcut for running the resp .bat files, running startup.bat file i get,CATALINA_HOME VAR HAS NOT BEEN SET PROPERLY, THIS OCCURS FOR BOTH TOP LEVEL DIR SETTING AND /bin DIR SETTING of CATALINE_HOME IN autoexec.bat
PLEASE HEL, I HAVE BEEN TRYING TO CONFIGURE IT FOR THE PAST DAYS BUT WITH NO SUCCESS, DONT KNOW WHERE I AM GOING WRONG..PLEASE HELP -
Setting up webauth for guest wireless access
Hi there,
I'm trying to set up guest wireless access. having no experience with this at all, I'm beginning to struggle.
Equipment:
2x 3850 stacked and acting as one switch running 03.06.00E
4x 1602E AP's registered to the WLC running on the 3850
The infrastructure is sound and corporate wireless access works ok.
I need a config that allows a guest user to connect to the guest SSID, DHCP an address, then when they open a browser, they are automatically redirected to a splash screen for them to log on. Once they log on with the supplied username and password they are then forwarded to whatever site it is they wish to go to; So far my config looks like this (removed unnecessary parts for brevity);
Building configuration...
user-name test
creation-time 1414684496
privilege 0
password 7 051F031C35
type network-user description test guest-user lifetime year 0 month 0 day 0 hour 23 minute 59 second 4
aaa new-model
aaa authentication login aaa_guest_webauth local
aaa authentication login local_login local
aaa authorization exec local_authorise local
aaa authorization network guest_authorisation local
aaa authorization credential-download default local
aaa session-id common
switch 1 provision ws-c3850-24t
switch 2 provision ws-c3850-24t
service-template webauth-global-inactive
inactivity-timer 3600
service-template DEFAULT_LINKSEC_POLICY_MUST_SECURE
service-template DEFAULT_LINKSEC_POLICY_SHOULD_SECURE
service-template DEFAULT_CRITICAL_VOICE_TEMPLATE
voice vlan
spanning-tree mode pvst
spanning-tree extend system-id
hw-switch switch 1 logging onboard message level 3
hw-switch switch 2 logging onboard message level 3
parameter-map type webauth global
virtual-ip ipv4 1.2.3.4
parameter-map type webauth guest-webauth
type webauth
redirect on-success http://www.google.com
banner text ^CC test text test ^C
custom-page login device flash-1:login.html
custom-page failure device flash-1:failed.html
class-map match-any non-client-nrt-class
policy-map port_child_policy
class non-client-nrt-class
bandwidth remaining ratio 10
interface VlanXXX
description "Guest-Access-VLAN"
ip address 10.x.x.126 255.255.255.128
ip helper-address x.x.x.x
ip helper-address x.x.x.x
line vty 0 4
exec-timeout 7 0
authorization exec local_authorise
login authentication local_login
transport input ssh
line vty 5 15
exec-timeout 7 0
authorization exec local_authorise
login authentication local_login
transport input ssh
wsma agent exec
profile httplistener
profile httpslistener
wsma agent config
profile httplistener
profile httpslistener
wsma agent filesys
profile httplistener
profile httpslistener
wsma agent notify
profile httplistener
profile httpslistener
wsma profile listener httplistener
transport http
wsma profile listener httpslistener
transport https
wireless mobility controller
wlan Wireless-Guest-Access 24 wireless-guest
client vlan Guest-Access-VLAN
ip access-group GUEST-ACCESS
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
security web-auth
security web-auth authentication-list aaa_guest_webauth
security web-auth parameter-map guest-webauth
session-timeout 1800
no shutdown
ap country GB
ap group default-group
ap group BUS-AP-Group
wlan Wireless-Corporate-Access
vlan BUS-CORP-DATA-VLAN
wlan Wireless-Guest-Access
vlan Guest-Access-VLAN
end
I carried out a wireshark trace and can see the dhcp ok, then see DNS queries to the DNS name serever and the replies, followed by a TCP SYN to the resolved IP of the website requested - but that's it, there is no SYN ACK reply or redirect to the login page which i have placed on the flash and specified under 'custom-page login'
I am under the impression that the way this should work is as follows;
1. Client connects to SSID and carries out DHCP DORA and is assigned an IP address
2. open browser on client and carry out name resolution
3. once name is resolved, carry TCP three way handshake with requested site (e.g. google)
4. once three way handshake is completed client carries out an HTTP GET request
5. WLC holds the response and redirects to the login page
6. on successful login, original requested page is forwarded to client.
I can't seem to get a response - even if I remove the ACL.
Am i heading in the right direction or am I trying to achieve something which is not possible with my setup?
Cheersalso, forgot to say, make sure your files are preceeded with webauth for your html and js and web_auth for image files
38725 -rw- 4265 Nov 4 2014 12:21:28 +00:00 webauth_login.html
38726 -rw- 6937 Nov 4 2014 12:11:03 +00:00 webauth_aup.html
38727 -rw- 1356 Nov 4 2014 12:11:30 +00:00 webauth_logout.html
38728 -rw- 662 Nov 4 2014 12:11:43 +00:00 webauth_failed.html
38729 -rw- 318 Nov 4 2014 12:11:58 +00:00 webauth_loginscript.js
38731 -rw- 82940 Nov 4 2014 12:12:28 +00:00 web_auth_image.jpg
CORE-SW01#sho run | s param
parameter-map type webauth global
type webauth
virtual-ip ipv4 1.1.1.1
custom-page login device flash:webauth_login.html
custom-page failure device flash:webauth_failed.html
parameter-map type webauth guest-webauth
type webauth
custom-page login device flash:webauth_login.html
custom-page failure device flash:webauth_failed.html
security web-auth parameter-map guest-webauth
CORE-SW01# -
Hi, I'm having a problem in a VM Guest cluster using Windows Server 2012 R2 and virtual disk sharing enabled.
It's a SQL 2012 cluster, which has around 10 vhdx disks shared this way. all the VHDX files are inside LUNs on a SAN. These LUNs are presented to all clustered members of the Windows Server 2012 R2 Hyper-V cluster, via Cluster Shared Volumes.
Yesterday happened a very strange problem, both the Quorum Disk and the DTC disks got the information completetly erased. The vhdx disks themselves where there, but the info inside was gone.
The SQL admin had to recreated both disks, but now we don't know if this issue was related to the virtualization platform or another event inside the cluster itself.
Right now I'm seen this errors on one of the VM Guest:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 3/4/2014 11:54:55 AM
Event ID: 1069
Task Category: Resource Control Manager
Level: Error
Keywords:
User: SYSTEM
Computer: ServerDB02.domain.com
Description:
Cluster resource 'Quorum-HDD' of type 'Physical Disk' in clustered role 'Cluster Group' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1069</EventID>
<Version>1</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-04T17:54:55.498842300Z" />
<EventRecordID>14140</EventRecordID>
<Correlation />
<Execution ProcessID="1684" ThreadID="2180" />
<Channel>System</Channel>
<Computer>ServerDB02.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ResourceName">Quorum-HDD</Data>
<Data Name="ResourceGroup">Cluster Group</Data>
<Data Name="ResTypeDll">Physical Disk</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 3/4/2014 11:54:55 AM
Event ID: 1558
Task Category: Quorum Manager
Level: Warning
Keywords:
User: SYSTEM
Computer: ServerDB02.domain.com
Description:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1558</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>42</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-04T17:54:55.498842300Z" />
<EventRecordID>14139</EventRecordID>
<Correlation />
<Execution ProcessID="1684" ThreadID="2180" />
<Channel>System</Channel>
<Computer>ServerDB02.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="NodeName">ServerDB02</Data>
</EventData>
</Event>
We don't know if this can happen again, what if this happens on disk with data?! We don't know if this is related to the virtual disk sharing technology or anything related to virtualization, but I'm asking here to find out if it is a possibility.
Any ideas are appreciated.
Thanks.
Eduardo RojasHi,
Please refer to the following link:
http://blogs.technet.com/b/keithmayer/archive/2013/03/21/virtual-machine-guest-clustering-with-windows-server-2012-become-a-virtualization-expert-in-20-days-part-14-of-20.aspx#.Ux172HnxtNA
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hello,
I need to inject IP address of VM's guest OS residing on Hyper-V host with Windows Server 2012 R2, from the host itself
Guest OS is also Windows Server 2012 R2.
In a powershell script I use SetGuestNetworkAdapterConfiguration method (link on
MSDN). It works when the IP and default gateway are from the same subnet, but it returns an error when IP and Default Gateway are from different subnets.
__GENUS : 2
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH :
__PROPERTY_COUNT : 2
__DERIVATION : {}
__SERVER :
__NAMESPACE :
__PATH :
Error : <INSTANCE CLASSNAME="Msvm_Error"><PROPERTY NAME="CIMStatusCode" TYPE="uint32"><VALUE>1</VALUE></PROPERTY><PROPERTY
NAME="CIMStatusCodeDescription" TYPE="string"></PROPERTY><PROPERTY NAME="ErrorSource" TYPE="string"></PROPERTY><PROPERTY
NAME="ErrorSourceFormat" TYPE="uint16"><VALUE>0</VALUE></PROPERTY><PROPERTY NAME="ErrorType"
TYPE="uint16"><VALUE>4</VALUE></PROPERTY><PROPERTY NAME="Message" TYPE="string"><VALUE>The operation
failed.</VALUE></PROPERTY><PROPERTY.ARRAY NAME="MessageArguments" TYPE="string"><VALUE.ARRAY></VALUE.ARRAY></PROPERTY.ARRAY><PROPERTY
NAME="MessageID" TYPE="string"><VALUE>16010</VALUE></PROPERTY><PROPERTY NAME="OtherErrorSourceFormat" TYPE="string"></PROPERTY><PROPERTY
NAME="OtherErrorType" TYPE="string"></PROPERTY><PROPERTY NAME="OwningEntity"
TYPE="string"><VALUE>Microsoft-Windows-Hyper-V-VMMS</VALUE></PROPERTY><PROPERTY NAME="PerceivedSeverity"
TYPE="uint16"><VALUE>5</VALUE></PROPERTY><PROPERTY NAME="ProbableCause" TYPE="uint16"><VALUE>0</VALUE></PROPERTY><PROPERTY
NAME="ProbableCauseDescription" TYPE="string"></PROPERTY><PROPERTY.ARRAY NAME="RecommendedActions"
TYPE="string"></PROPERTY.ARRAY></INSTANCE>
ReturnValue : 0
PSComputerName :
If I set IP address manually from guest OS, then I receive a warning window about default gateway being in another subnet than IP address, but I can choose to continue and the IP address/default gateway got configured.
However, in the parameters of SetGuestNetworkAdapterConfiguration there is no such an switch
uint32 SetGuestNetworkAdapterConfiguration(
[in] CIM_ComputerSystem REF ComputerSystem,
[in] string NetworkConfiguration[],
[out] CIM_ConcreteJob REF Job
Please advise on workaround.
Thanks,
Andrei
Andrei Moraru EndavaHi,
Please refer to the following post to see whether you can resolve the issue.
Network Adapter (not Legacy) does not work on Virtual Machine after installation through ISO
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2virtualization/thread/b1e9d24c-e298-472e-ad72-90cf079f6fbd
By the way, did you only encounter this issue with one VM or all VMs? Please do the same test on VMs with other version of Windows such as Windows Server 2008 or Windows Server 2003.
Best Regards,
Vincent Hu -
Setting File Name inside ABAP mapping
Hello All,
We have a requirement where we need to send the IDOC in a flat file format to the destination system which we are doing inside an ABAP mapping. Now we need to set the file name depending on a particular field in the IDOC. For this we need to use the DynamicConfigurationKey class inside our ABAP mapping.
Can anyone throw some light how to access these Adapter-Specific Attributes inside ABAP mapping?
Thanks
Abinashguess this is the one
Re: Abap mapping and variable substitution in File adapter
Maybe you are looking for
-
Lotus Notes delete my Notes.app how can I recover?
I Install Lotus Notes for mail for my office and now I dont have Notes.app cause Lotus Notes have the same name, I think!... how can recover the Notes.app? Any Idea? Thanks
-
1.5.1: Bug with single keystroke bind value being displayed but ignored
I just ran into a bug with using with bind values (run as statements) using SQL Developer 1.5.1.54.40, JDK 1.6.0_04, Win XP SP 2. If the bind value was previously Null (NULL checkbox checked), then typing one (and only one!) character into the Value
-
Hi, I have a multilevel structure that looks like that : a = structNew() a.a.a.a = apple a.a.a.b = banana a.a.b.a = potato a.b = beef What would be the best way of converting that structure in an XML document that would look like the following attach
-
Error when loading the Reports from the IC Manager
Dear CRM Gurus, i am getting the below error message when trying to access the Reports from the IC_MANAGER role 'Error loading template 0TPLI_CSRV_T01_Q0001_V01' and Technical Information for Message: (Error loading template 0TPLI_CSRV_T01_Q0001_V01
-
Is there a way to reduce the size between the lines in when creating a form in FormsCentral so that you can fit more lines on a page?