Setting dimension of RTP packet with 'rtp' jmf

How is it possibile to set the dimension of RTP packet with JMF in the transmitting audio stream with RTP????

thesti wrote:
how JMF deal with RTP packet loss? since my application doesn't handle anything due to RTP packet loss, i believe that JMF has a mechanism to deal with it.It "deals" with it by having a blank spot in the rendering where that packet would have gone...

Similar Messages

  • [CUPS] Unable to set my new CUPS server with an HP printer (solved)

    Hello,
    I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
    (all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
    Here are a list of installed package : cups ghostscript gsfonts hplip
    The printer (USB) :
    (lsusb)
    Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
    (dmesg)
    usb 2-2: new full speed USB device using uhci_hcd and address 4
    usblp0: Disabling reads from problematic bidirectional printer
    usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
    Current configuration (only change made to original configuration) :
    Listen <ip_serveur>:631
    <Location />
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin>
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin/conf>
    AuthType Default
    Require user @SYSTEM
    Order allow,deny
    Allow From all
    </Location>
    When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
    Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
    After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
    I look in log and I can just see this :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    I googled for one hour, but is not more working right now ...
    Some questions :
    - the printer is not detected? Is it because of the ACLs errors ?
    - what the hell is "ACLs" for cups ? Never seen that before ...
    So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
    This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
    Any idea on what to do/try now ?
    EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
    Unsupported format 'application/vnd.cups-command'!
    Current log file :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
    E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
    E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
    (web interface)
    "/usr/lib/cups/backend/hp failed"
    (error_log)
    E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
    E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
    EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
    So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
    But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
    - hpijs, 3.10.9
    - hpijs, 3.10.9.11
    - hpcups, 3.10.9
    Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
    HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
    I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
    E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
    E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    Thanks for all .. hope you don't think I'm crazy ^^
    Last edited by loopx (2011-01-09 20:31:21)

    WD and their lack of support for Mavericks:
    A recent email from WD reads:
    Dear WD Registered Customer,
    UPDATE: November 1st, 2013
    As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
    The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
    Sincerely,
    Western Digital
    Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
    In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

  • None of the dimension tables are compatible with the query request

    Hi,
    i am experiencing the below error while querying columns alone from employee dimension (w_employee_d) in workforce profile SA. There is only one column in my report which is employee number coming from employee dimension. when i query other information like job, region, location etc i am not getting any error. the below error appears only when querying columns from employee dimension. the content tab level for the LTS of employee dimension is set to employee detail.
         View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14077] None of the dimension tables are compatible with the query request Dim - Employee.Employee Number. (HY000)
    SQL Issued: SELECT 0 s_0, "Human Resources - Workforce Profile"."Employee Attributes"."Employee Number" s_1 FROM "Human Resources - Workforce Profile" FETCH FIRST 65001 ROWS ONLY.
    couldn't able to know the exact reason. Any suggestions would be highly appreciated.
    Regards.

    hi user582149,
    It is difficult to answer you question with such a little amount of details. Could you specify:
    - how many facts/dimensions are you using in the query?
    - what is the structure of your Business Model?
    - which version of OBI are you using?
    - what does your log say?
    I hope to tell you more having the information above
    Cheers

  • SCD 2 Dimension Load is Inserting with every load..

    Hi,
    We are using OWB Client 10.2.0.3.33 and OWB repository 10.2.0.3.0.
    We are trying to load the customer dimension (SCD 2), but with every load a new record is getting inserted into the dimension even if no change is being made to the trigger history columns.
    Is it a bug? Can any one provide any insights into this.
    Regards,
    Sandeep

    Hi Jörg,
    The same mapping is working fine in the development environment but its working differently in Test and Production. So, I have checked the nls_lang settings and now both the source system and repository have the same nls_language setting, but still the problem is present.
    Can you please suggest any thing else to look for?
    Regards,
    Sandeep

  • How to set up my elderly parent with Mac so that I can use remote access to help her?

    I want to set my elderly mother up with a new Mac mini so that I can use remote access to show her how use email, browse the internet, share photos.  (She lives in KY, I live in OR)
    She has had an iPhone and an iPad for about 6 months and she can barely use them without becoming frustrated.   I want to be able to see her screen with her and show her how to do things.
    My plan is to set her up with a Mac mini and I'll use my MacBookAir to remote into her system.  I'm buying the mini to configure and then I'll mail it to her.
    My question is whether to try to use Back to My Mac or Teamviewer for remote access
    I have broadband with comcast and she has broadband with Access Cable.  Each have their company modem/routers--neither of us have Airport Express.
    I have my own iCloud account and she has her own.   If I use Back to My Mac, it seems that I would need to set up a separate account on my Mac that would sync to her iCloud account.
    Teamviewer seems easier because I don't have to use a separate account.   Any advice?   Anything that I'm not thinking about?

    As Linc says, you can establish a Screen Sharing session via iMessage and Facetime.  The advantage of these 2 approaches is that once your Mom gets used to using them, she will be more comfortable using them to communicate with you.  I've talked to my Mom via iChat (aka iMessage) more since she learned to use them, then in all the years before that (including when I was a child ).  And just being able to see your Mom via Facetime can be useful when you want to gage how she is doing.
    However, if you are any distance from your Mom, they you want backup methods incase something goes wrong.
    So beside iMessage/Facetime, the next best would be Back-to-My-Mac via iCloud, however, you will want to establish her Mac as using your account so that you have the right to take control remotely.
    An alternative that does not mix up your iCloud acounts would be to use TeamViewer.com (which has an unattended mode so you can do off-hour maintenance when your Mom is not around; or check up on her to find out if she is dating - Turns out if I had been paying attention, I would not have been blind-sided by my Mom getting Married again last Summer - she is in her 80's! ).
    LogMeIn.com, as dwb says, can be used the same was as TeamViewer.com
    Both LogMeIn.com and TeamViewer.com are very good at making it easy to get through the home router and if you are having any problems connecting using other Methods, TeamViewer.com or LogMeIn.com will most likely not have any issues.
    Back-to-My-Mac allows screen sharing and file sharing so you can transfer files as well as control the screen.
    Screen Sharing via Messages allows cooperative file transfer. That is to say, you can try pushing a file to your Mom, but she has to accept each transfer.
    TeamViewer.com has an unattended file transfer mode.
    LogMeIn.com requires the paid version to transfer files.  However, there are other ways to transfer files, such as downloading them from the original source on your Mom's system while using screen sharing, using Dropbox (or similar), emailing them, etc...
    Of course if you are really network savvy, you can roll your own via ssh tunnels, port forwarding routers, getting dynamic DNS names, transferring files via scp, or tunneling AFP file sharing, tunneling your screen sharing sessions.  Lots of fun and excitement playing with terminal commands

  • I have itunes set up on a PC with all my music, apps, etc. I want to stop using PC and move my iTunes and files to a Mac I bought and synch my iPhone with the Mac. Can I just synch iPhone with Mac iTunes and will it copy all my stuff onto Mac, or will I h

    I have itunes set up on a PC with all my music, apps, etc. I want to stop using PC and move my iTunes and files to a Mac I bought and synch my iPhone with the Mac. Can I just synch iPhone with Mac iTunes and will it copy all my stuff onto Mac, or will I have to copy files from PC onto Mac?

    Here are some of the links to get you started.
    https://discussions.apple.com/thread/3727530?start=0&tstart=0
    http://support.apple.com/kb/HT4527
    http://www.macworld.com/article/1146958/move_itunes_windows_mac.html

  • How do I set up different network locations with different wifi?

    I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
    I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
    What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
    Anyway to do this?
    Thanks in advance for any help or advice.

    Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
    However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
    Thanks again for any help

  • How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
    http://support.apple.com/kb/HT4145
    In particular, you would want to focus on the information regarding a "Roaming Network"

  • How do I set up a Apple TC with a Verizon FIOS wireless modem model  Actiontec 424wi F series.  Does the wifi in the modem have to be shut off and will it effect the FIOS tv?

    How do I set up an Apple TC with a Verizon FIOS wireless modem model MI424wr F.  Does the wifi have to be turned off in the modem and then bridge it to the TC?  Will FIOS tv be effected?

    Your first call should be to Verizon support to ask them if you turn off the wireless on the Actiontec router....will it affect any of the features/functions of the FIOS system?
    If yes, then it would be best to leave the Actiontec router "as is" and connect the Time Capsule using Ethernet in Bridge Mode as a back up device only (wireless is turned off on the Time Capsule).
    If you want to use the dual band (and likely much faster) wireless capability of the Time Capsule, then you should turn off the wireless on the Actiontec device to help prevent wireless interference effects that will likely occur when two wireless routers are in close proximity to each other.
    Again, the Time Capsule would be connected to the Actiontec router using an Ethernet connection from one of the LAN <-> ports on the Actiontec router to the WAN port (circle icon) on the Time Capsule. Configure the Time Capsule in Bridge Mode as well in this type of configuration.
    Bottom line....what Verizon says will pretty much dictate how you can set up the TIme Capsule.

  • How do i set up my apple id with itunes and the appstore?

    How do i set up my apple id with itunes and the appstore?

    iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
    http://support.apple.com/kb/PH1726

  • TS4268 I can't activate FaceTime & iMessage on my iPad ... Would this have anything to do with already having these set up on my iPhone with the same apple ID?

    I can't activate FaceTime &amp; iMessage on my iPad ... Would this have anything to do with already having these set up on my iPhone with the same apple ID?

    As long as you're logged into the same AppleID on both devices, this is not a problem.  It's only a problem if you're logged into a different AppleID and then try to associate FaceTime with an email that tied to the other AppleID.

  • I have 2 ipod touches on the same apple id account.  Can I set facertime up on both with different access emails?

    I have 2 ipod touches on the same apple ID/account.  My daughter uses one, and I use the other.  Can I set facetime up on each with different access email addresses (so that we don't get each others calls?)?

    I recommend that you
    Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Use the new ID on her iPod but only for:
    Settings>Messages>Send and Receive
    Settings>FaceTime
    Settings>GameCenter
    and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.    
    Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

  • Two different apple IDs/two different iClouds - help! I had a Yahoo e-mail when I bought my iPod and registered it/set up my iTunes acct with it. Gmail acct w/ my iPad due to virus, now 2 apple ids and 2 iclouds, can I merge them somehow?

    When I set up my iPod I had a Yahoo email account, and I set up my iTunes acct. with it. It got hacked, viral, and I closed it. When I got my iPad2, I had a gmail account, and set it up w/ that email account. As a result, I was given a different apple id - stupid of me. This also resulted in me getting a different iCloud. When I got my iPhone, I used my iPod account (linked to a newly set up Yahoo account), because I wanted all of my iTunes song on my phone. So now I have two apple ID's and two iClouds, and my phone and my iPad are on separate iClouds. I hate it, and I don't know if I can somehow merge the two. I want to buy additional iCloud storage, but only if I can do so on ONE account that is for both devices. Does anyone know if/how I can accomplish this?  Thanks so much.

    When I set up my iPod I had a Yahoo email account, and I set up my iTunes acct. with it. It got hacked, viral, and I closed it. When I got my iPad2, I had a gmail account, and set it up w/ that email account. As a result, I was given a different apple id - stupid of me. This also resulted in me getting a different iCloud. When I got my iPhone, I used my iPod account (linked to a newly set up Yahoo account), because I wanted all of my iTunes song on my phone. So now I have two apple ID's and two iClouds, and my phone and my iPad are on separate iClouds. I hate it, and I don't know if I can somehow merge the two. I want to buy additional iCloud storage, but only if I can do so on ONE account that is for both devices. Does anyone know if/how I can accomplish this?  Thanks so much.

  • How to set up a pdf embeded with different code so that people can get different excess code after they paid on-line?

    For example, I want to set up a pdf embeded with code, and send it on-line. People who want it should pay for it first and get the access code. I need to set different access code in order to avoid people A give the access to people B.

    Unless you use a very expensive DRM protection measure, I don't see how it's possible. How can you prevent someone from sending a file with the password to someone else?

Maybe you are looking for