Setting for BY-Product

Dear Gurus,
what will be the setting for costing side ,in BOM we maintained negative qty .
we require all setting regarding costing point ofview
siva

Hi,
1.Consumption account cannot be determined
Message no. CK322
Diagnosis
Automatic account determination could not find a consumption account with the following criteria:
Chart of accounts : GCOA
Transaction : GBB
Valuation/acct modification : Z001/ZOF
Material/valuation class : RMBSP00000005 /3002
Procedure
Check the Customizing settings for account determination.
Solution :
for the above problem make the following setting :
OBYC -> GBB ->
add one entry for new GL a/c to acct modification ( ZOF ) with valuation class ( 3002)
2.Costing items for material FGEEM00000007 in plant 1000 without cost element.
Message no. CK597
Diagnosis
The itemization for material FGEEM00000007 in plant 1000 contains valuation-relevant items without a cost element.
System Response
The costs of these item(s) cannot be included in the cost component split. This means that there will be inconsistencies between the cost component split and the itemization.
Procedure
Check the log for further system messages for material FGEEM00000007 in plant 1000. Correct the error and carry out costing again.
Solution:
GO to OKTZ and in the Structure Check whether the Cost Element for MAterial
Consumption has been assigned in the Itemization or not.
I think it will resolve your issue . If any problem pl revert.
Regards
Vinod

Similar Messages

MDIS setting For SRM product ID

Hi Guys,
I am using standard PI content CatalogUpdateNotification_Out to transfer the product id Data from SRM to MDM.
I have the XML file in the _MDMProductDataTransmission\Ready folder.
My requirement
1. I need to map only product id field into some Check table in MDM product id
2. I need to automate it in MDIS so that the file is processed automatically.
Please let me know how I do the above 2 requirements
Regards,
Prabhu

Hi,
Still i am not clear about my doubt, is there any difference betn Product category & Category ID.
Because in Org structure >> under ext attributes tab we have option to enter the product category & when we create material using commpr01, we need to enter Category ID.
And when we create a shopping cart, we need to give the details of Product category & Product ID
looking for the help.
regds,
CB

Best video setting for music production?

I am getting set up with my new MBP15 2.53 with 4GB of RAM. Have a question -- my most intense application is music production in Logic Studio. I always have the power cord connected when using it and am not currently using an external monitor.
Will it make any difference in Logic's ability to handle MANY tracks which internal video card I use? Does the enhanced card put less or more drag on the system if you are not gaming?

JDF,
It shouldn't make any difference one way or another. On the face of it, using the integrated GFX would obviously consume some of the available RAM, but it turns out that it doesn't matter whether the integrated GPU is active or not; that RAM gets allocated to the GPU anyway (even when using the discrete GPU).
The issue of whether or not physical RAM is being allocated to the integrated GPU is the only issue that could possibly have any bearing. Since it is always allocated, it makes no difference.
Scott

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

Yes, use hyperlinks.

Credit Limit set for Product wise

HI ,
We have a requirement of Customer credit limit has to set at Product ( Material) level , can it be achieved through FSCM Credit Management .
Say Customer A has Deal with Product X and Product Y , Product X credit Limit : 100000 , B = 200000 overall 300000 for Customer A.
Regards,
klreddy

Hi ,
As I discribed in example , Sales is to Single Customer , but sales contain multiple products . As a Business Credit Policy , we required to set up credit limit for each product wise to the same customer .
Any further information , if you feel , please revert.
Regards,
Klreddy

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

BC Sets for Product Compliance

Hi guys,
We are looking at option of copying customization table values using BC sets for Product Compliance.
I don't think we can use BC sets for Incident Management and Risk Assessment part.
However I know you can use BC sets for product compliance part so my question is how do we use
BC sets? Any documentation/link or suggestions on what are the steps?

Dear D M
we are not using BC sets. I have only come in touch with them using EHS classic and not EHSM.
Check may be this SAP online help to get some ideas:
Business Configuration Sets (BC-CUS) - SAP Library
C.B.
PS: you can execute in any case what is known as an "cross transport"; This option should be well known (I assume) as it it one "classical" solution to get one configuraiton from one SAP system to a different one (pay attention: Release status should be the same; but this is true as well for BC sets).
this is nbot the same as using a BC set !

Custom metadata sets for Productions?

I've added a new metadata set that suits our needs, but it is not showing up as an option when creating a new production - is there some option that I missed in order to allow this, or is there a completely different process involved with creating a new metadata set for production folders? Can someone tell me what I missed or walk me through how to do that? Thank you!

Did you make sure to assign the new MD Set to Productions and not Media? If so there must be something else wrong with the way you set it up. Make sure the ID says:
paproductionyourmetadatasetname
If it does not ID this way it will not show in new Productions.

I need to find a mac media set or files for cs3 production premium

My school bought a site license for production premium cs3 and we think a student stole the mac media set. I contacted customer support and they said that they couldn't help us because the version is to old, they instructed me to ask on this forum. Does anyone have a Mac media set of cs3 production premium they could burn and send me or can someone ftp me the files.

If Adobe Customer Support cannot help you, then there is little that we users can do. It would be illegal to copy any of our Adobe programs to disc and send them out.
You might want to look at ProDesign Tools, and see if they have perhaps a download version of PrPro CS3 in their links (think they are all the "trial versions," and those would not help before CS 5, IIRC, as it can be upgraded from trial to full-paid with the insertion of the S/N).
If you only talked to Technical Support, I would contact Customer Support, which is more geared to sales aspects, than T/S.
Good luck,
Hunt

Exists function- For common products in two sets

Hi All ,
I have this below mdx query , where i want the common products that were submitted in december 2014 and present in the following two sets
i) First Set : List of apps which are set by required attribute in ManualReview dimension as "true" ,result attribute is "fail" for them and Submitted date is
December 2014
ii) Second set : List of products where IsAutopassed is "True" and Submitted date is
December 2014 .
Below is the mdx query for this. But i am not able to get common products out of these two sets . i.e. i want to implement the sql functionality of
SELECT * FROM SET1 WHERE PRODUCTID IN ( SELECT PRODUCTID FROM SET2)
SELECT
non empty
EXISTS(
[DimProduct].[ProductId].[ProductId].members,[DimManualReview].[Required].&[True],
[DimResult].[Result].&[Fail],
[DimSubmittedDate].[Calendar Date Hierarchy].[Year].&[Calendar 2014].&[Quarter 4, 2014].&[December 2014]
[DimProduct].[ProductId].[ProductId].members, [DimProductSubmission].[IsAutoPassed].&[True],
[DimSubmittedDate].[Calendar Date Hierarchy].[Year].&[Calendar 2014].&[Quarter 4, 2014].&[December 2014]
) ) ON ROWS,
non empty [Measures].[ProductCount] ON columns
FROM RAD
Please help me in getting in to a right direction.

Hi NedunuriRajesh,
According to your description, you want to get the common member from two sets. Right?
In this scenario, I suggest you use INTERSECT() the intersection of two input sets. Please try the MDX below:
SELECT
non empty
INTERSECT(
[DimProduct].[ProductId].[ProductId].members,[DimManualReview].[Required].&[True],
[DimResult].[Result].&[Fail],
[DimSubmittedDate].[Calendar Date Hierarchy].[Year].&[Calendar
2014].&[Quarter 4,
2014].&[December 2014]
[DimProduct].[ProductId].[ProductId].members,
[DimProductSubmission].[IsAutoPassed].&[True],
[DimSubmittedDate].[Calendar Date Hierarchy].[Year].&[Calendar
2014].&[Quarter 4,
2014].&[December 2014]
ON ROWS,
non empty [Measures].[ProductCount]
ON columns
FROM RAD
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Decimal setting for product

Hi All,
Here for a product price for B2B is comming as 11,435(3 decimals) when ordering in order.jsp. Let me know how to fix this issue.
Note: We are not using IPC.
Regards,
Devender V

Hello Mark,
Sorry for not providing complete information.
This apprears while order is created.
But here price is coming in 3 Decimals(eg: 11,456), And the requirement is make it to 2 decimals.
My question would be where to correct this :
1) We are not using IPC, So from where this price is determined. Can we make change at back-end.
2) Where we can make front end changes.
Regards,
Devender V
Edited by: devender on Jul 12, 2010 10:03 AM

Help needed for automatic batch creation for by-products(PP-PI)

Hi,
In the Goods Recpt tab in transaction COR1, we have a field for creating a batch manually for the header material. On clicking on create, a pop up is generated whch facilitates creation of batch for the header material.
At this point, if i go to the material list, I would like to see the same batch number ( same as header) written against the BY-Products.
Essentially, when i create a batch for the header material, it should also create a batch with the same number for the by-product and populate the same in the materials tab.
One important thing to note here is that when we click on create batch icon, the data is stored in a structure and the batch is actually created only when the process order is saved.
Please advise if this can be achived by some standard settings in SAP or do we need to change the standard code. If later is the case, please advise about the point where to insert the required code. I have found a user exit at the point where batch numbe is created manually.
Please advise.

As per SAP Batch definition Batch is the quantity or partial quantity of a certain material or product that has been produced according to the same recipe, and represents one homogenous, non- reproducible unit with unique specifications. So logically you cannot have same batch number for two materials.
If you want to find out the relation between batches of header material and by product that is produced during production, you can use Batch Information Cockpit.
To see batch details in Batch Cockpit (T-code: BMBC), You have activate Batch where used function in IMG using path : Batch management-->Batch Where used list --> make setting for batch where used list.
Regards,
Sachin

CRM 7.0: set up IPC product configuration

Dear experts,
we set up a CRM 7.0 with ERP 6.0 backend integration. In the ERP we apply ERP variant configuration (Materials). Quite simple: some configurable materials (material type KMAT) with a few characteristics and product variants of them (material type FERT) which are maintained in order processing. Variant conditions are maintained and automatically determined for product items. Now we need this in CRM for opportunity processing.
Therefore we have created Knowledge Base and Runtime Version for the configurable products in ERP and downloaded test materials (one KMAT and one FERT (product variant) into CRM (download objects MATERIAL and SCE). In CRM product master data maintenance for the KMATconfigurable tab with the configuration profile is displayed. Afterwards we downloaded condition master data into CRM, among others variant condition VA00 with condition table A057. Everything looks fine.
In CRM we want to set up opportunity management. In the opprotunity transaction processing pricing is working already besides the determination of variant pricing. As we intend to maintain only FERT materials (product variants)we do not need interactive product configuration in CRM sales order or product simulation in CRM product master data. We only want the variant prices to be determined automatically for the product variants (FERT) in opportunity processing. That is why we are not sure if it necessary to set IPC configuration settings (XCM etc.). This is my first question. Nevertheless we started to maintain settings for product configuration in order to find out if this is solves our problem:
1.) XCM configuration (IPC): we set up a customer application for "crmproductsimulation" and defined customer components jco (RFC test worked) and productvariants and restarted J2EE Instance in TX: SMICM
2.) We set up product configuration customizing:
table: COMM_IPC_PROP: caller; crmproductsimulation; scenario.xcm; ZCRMproductssimulation
table: COMM_IPC_URL: UI_CFG; http://<host>:<port>100/ipc/ipc/command.do
When starting simulation of product model for configurable product in TX: COMMPR01 I get following error message: "HTTP500: ISA Framework: The [XCM application configuration]='ZCRMproductssimulation' does not exist. Check XCM configuration.
Details:   No details available". This application is maintained in XCM so I assume something else is missing.
To sum up my questions:
1.) Is it necessary to set up IPC product configuration as described above when we only want to maintain FERT products which are product variants and determine corresponding variant prices (VA00). No interactive product configuration is necessary.
2.) If it is necessary to set up IPC product configuration to active product configuration (to see product variants in product master data maintenance and opportunity processing and corresponding variant condition data), what did I do wrong?
Thank you very much for your help.
KInd regards,
Mark

Hi Arup,
thank you very much for your reply.
Concerning XCM / CRM customizing I have done the steps you recommended:
1. XCM: I created customer applications for crmordermaintain and crmproductsimulation and maintained customer component JCO for both of them (Assigned JCO User has SAPALL / SAPNEW, test run was successful) Active and default are ticked. Are there any further steps missing.May be in General Application Settings > Customer > ipcwebappconfig - I changed nothing there (SSLenabled: true)
2. In CRM customizing I maintained tables as follows:
COMM_IPC_PROP:
caller   crmordermaintain scenario.xcm   Zcrmordermaintain (name of customer xcm app -case sensitive)
caller   crmproductsimulation scenario.xcm Zcrmproductsimulation (name of customer xcm app -case sensitive)
COMM_IPC_URL:
Destination: UI_CFG ;Appl. <blank>; URL: http://<host>:<J2EEport/ipc/ipc/command.do
Calling the IPC product configuration e.g. from the CRM product master (simulate model), I get the already mentioned HTTP error:"ISA Framework: The [XCM application configuration]='Zcrmproductsimulation' does not exist. Check XCM configuration.".
That's why I am thinking that something is missing concerning the communication between CRM application and IPC,because XCM applications do definitely exist.
Is the URL correct .../ipc/ipc/commando.do which I maintained in table COMM_IPC_URL?
Is it possible to check if communication between CRM Online and Java does work respectively what do you exactly mean by "IPC URL must be available for UI_CFG"? UI_CFG ist a RFC-connection which has to be maintained additionaly and if so what has to be maintained exactly?
You mentioned a RFC_USER (This is the JCO-User I suppose?)and J2ee user. Is the J2ee user just the admin user of the J2EE engine or do you mean something different?
Thanks in advance for your further help.
Best regards,
Mark
Edited by: Mark Willhoeft on Jun 4, 2010 8:36 PM
Just one further thing: After changing XCM config I restarted J2EE by TX SMICM (Administration - J2EE Instance local - Send soft shutdown - with restart). Is this enough to restart J2EE and activate changed XCM settings or has the restart to be handled different?

"Licensing For this Product Has Expired" (But I just bought it!)

I'm having an installation problem, with Adobe CS4 Design Premium for Windows on Vista(64). For technicality purposes, I believe everything installed fine, but I have not been able to open the programs even once, which apparently means this is an installation issue.
Here's the situation:
I had a trial version of Photoshop CS4, it expired, I uninstalled it (or at least went to Control Panel-->Programs And Features--->"Uninstall"), bought Adobe Premier with my student discount, installed it with the new serial number and the 2 CDs without any problems (so I thought), but now every time I try to open any CS4 Program (Photoshop, Dreamweaver, Illustrator, etc.--anything but Acrobat Pro or Bridge CS4) I get a message saying, 'Licensing for this product has expired.'
I found an equivalent issue with Macs and there appears to be a quick fix:
"The tech had me remove APPLICATION SUPPORT > ADOBE > ADOBE PCD > cache > cache.db (to trash)" This apparently solved the problem.
Does anyone know an equivalent fix for Windows PCs?
I've have tried downloading the fix from the following website:
http://www.adobe.com/support/contact/licensing.html
(Running this multiple times, rebooting, etc.) but I believe the above website is just for problems of "License has stopped working" and not "Licensing for this product has expired"
I also tried setting my laptop's date/time back to May 31st 2009 following these instructions:
http://kb2.adobe.com/cps/494/cpsid_49485.html
but when I do that, I get the original, 'Accept these Terms' page, and as soon as I click "I agree' that page disappears, and nothing else happens. My computer works fine, but the program does not start. Therefore I can't deactivate the program/serial number, reset the correct date, start the program, and enter the proper serial number.
Any chance someone knows the appropriate Windows File to remove to solve this problem? Or have any other advice?
Many thanks in advance,
Kevin
PS--I've tried to stay professional about this situation, but it really has me livid. I'm appalled that something that cost me 300+ dollars (and I am fully aware it costs most honest people significantly more) could have caused me to waste the better part of a day, and get so frustrated, and I am still no closer to a solution. If it doesn't get resolved soon I am tempted to try returning the software as 'defective' (which for all intents and purposes it is) or never buy an Adobe product again. My friends have less trouble with the cracks/keygens/etc out there, and they're up $300+ on me.

UPDATE:
So, I took John T. Smith's advice (thanks for the phone number--relatively short wait time compared to the other number I had tried), and called Customer Service. I got the usual run-around, where the first guy wanted me to try all the things I described in the original post. Had me try something else (which involve reinstalling) which didn't work. Finally, the next gal I talked with admitted she didn't know the solution, and the problem would be 'upgraded' to the next higher level of presumably smarter tech people. I asked the time frame for this, and she said 1-2 days, which I wasn't happy about, and finally spoke with her supervisor. This person walked me through the uninstallation, and had 'some files' I should delete. AND FINALLY, I GOT WHAT I WANTED:
He said if I just removed/deleted the following file:
C:\Program Files(x86)\Common Files\Adobe\AdobePCD\Cache\Cache.db
So the order he wanted me to do it was:
Uninstall CS4 Design Premium (with windows vista Program and Features in the Control Panel, remove the above file, restart my computer, and reinstall the software. The reinstall didn't go smoothly the first time or two (early on, it said Illustrator, Photoshop, etc could not be installed..) so I just closed ALL programs, and tried again) and finally everything works, or seems to!
From what I read on a Mac forum with the same problem, it seems like I might not have had to uninstall/reinstall the whole suite (which I wish I'd tried, because it would have saved me nearly 2 hours).
But at any rate, everything seems to be working. I wrongly assumed the PC version would have had a different culprit file to be removed. I wish I'd searched my hard drive for the AdobePCD folder earlier. But...now I am happy.
Cheers, and I hope this post might be of some help to a poor unfortunate lad with the same problem I had.

Oracle 9.2.0.3.0 patch set for windows - questions

Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;

I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?

Setting for BY-Product

Similar Messages

Maybe you are looking for