Setting for getting more than 1000 recent emails?

I currently have an iPad2 and only have the option for seeing 1000 of the most recent emails in my inbox. Is there any other options for increasing this number?

Maybe using http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:73830657104020
NOT TESTED!
select a.name,
       b.occ_title,
       c.town
from emp a,
       occupation b,
       country c
where a.emp_code in (select substr(txt,
                                    instr(txt,',',1,level) + 1,
                                    instr(txt,',',1,level + 1) - instr(txt,',',1,level) - 1
                                   ) as token
                        from (select ','||:txt_clob||',' txt
                                from dual
                      connect by level <= length(:txt_clob) - length(replace(:txt_clob,',','')) + 1
                     )

Similar Messages

I am running a strain gage test and can't get more than 1000 samples

A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
If the loop is stopped rather thanhaving the file verified an error is listed:
Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
The given possible reason given is: attempted to read a sample beyond the final sample acquired.
When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
I have made screen shots of the VI and the error code to assist finding the incorrect programing.
Thank you for your help.
Jim Steinmeyer
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
strain test error.doc ‏493 KB

Thank you,
I was just thinking about being able to increse the size of the doc. for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
Jim
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
block diagram.JPG ‏134 KB
DAQmx.JPG ‏129 KB

Any way to get more than 1000 characters in notes?

i was just wondering if there was any way to get more than 1000 characters in the notes section of the ipod. i have outlines for school and they are a lot longer than 1000 characters... i didnt know if there is a setting on itunes or the ipod or a hack or mod to make it more than 1000 character limit. thanks for the help

No.
You can use the iPod in Disk mode and copy the outlines in their native format (Word?) and put them on your own computer.

How can i get more than 1000 items in Custom List Displaying Items?

http://.....sites/_vti_bin/listdata.svc/AddressBook(List) allows 1000 items Only my AddressBook List, but i have more than 1000 items in my AddressBook list. I want to get items
from AddressBook list and bind in another place using Autocomplete method like this.
=======>>>>listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook.
and my coding in camel like below
protected void btnpopulatedetails_Click(object sender, EventArgs e)
SPSite objSite = SPContext.Current.Site;
SPWeb objWeb = objSite.OpenWeb();
objWeb.AllowUnsafeUpdates = true;
SPList list = objWeb.Lists["Address Book"];
SPQuery query = new SPQuery();
query.QueryThrottleMode = SPQueryThrottleOption.Override;
query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + txtcustomer.Value + "</Value></Eq></Where>";
query.RowLimit = 500;
SPListItemCollection items = list.GetItems(query);
function fnCustomerSearchBind() {
if ($("input[id$='txtcustomer']").length != 0) {
var collcustomer = searchCustomers('', urlTo, fieldto);
$("input[id$='txtcustomer']").autocomplete({
source: collcustomer,
//maxLength:10,
select: function (event, ui) {
//debugger;
event.preventDefault();
$("input[id$='txtcustomer']").val(ui.item.value);
$("input[id$='btnpopulatedetails']").click();
return false;
minLength: 0,
function searchCustomers(value, listurl, fieldto) {
var collcus = new Array();
var custresults;
var url =listurl + "?$filter=startswith('" + fieldto + "','" + value + "')";
//debugger;
$.ajax({
cache: true,
type: "GET",
async:false,
dataType: "json",
url: url,
success: function (data) {
custresults = data.d.results;
//alert(listurl);
// alert(data.d.results);
for (var x = 0; x < custresults.length; x++) {
//alert(custresults[x]['To']);
collcustList.push(custresults[x]['To']);
//debugger;
//debugger;
return collcustList;
In my research listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook has 1000 items in 1st Page by default, So how to change 1st Page by default to All Pages through
code. I think you understand my environment by look above coding, if you don't I am using office 365 sandbox solution. One more thing i know through my research Pages can be change by using Ado.Net Data Service, i tried this one but this one support windows
server 2008 r2 only but i am using Windows Server 2012 r2. Please help me if you know the answer.

Hi,
Here is a blog would be helpful:
ADO.NET Data Services returns 1000 items
https://gilleslauwers.wordpress.com/2010/12/08/ado-net-data-services-returns-1000-items/
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to get more than 1000 rec from Oracle?

Hi
i got this issue from 1 of my fnd.
can any one tell me how to over come this issue?
I need help in solving the issue
This is the oracle error coming when we try to export
the records to the excel sheet.
Macromedia][Oracle JDBC Driver][Oracle]ORA-01795:
maximum number of expressions in a list is 1000
This error is due to the limitation in oracle db list
query.
example:
select * from FEEDBACK_IN Where feedback_in.case_id
IN ( (param 1) , (param 2) , (param 3) , (param 4) ,
(param 5) , (param 6) , (param 7) , (param 8) , (param
9) , (param 10) , (param 11) , (param 12) , (param
13)……………………….(param
5000))
If the list exceeds 1000, we will get the following
error from the database. And there is a limitation in
oracle db to 1000.
We need to rewrite the query to avoid the list error
if the list exceeds more then 1000 records.

You must work with the guy who asked the same question
yesterday.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=6&threadid=1149324&ente rthread=y

Syncing selected playlists set but get more than are checked

Recently changed to syncing selected playlists to make room on iPod as library got too big. Problem is that list of playlists on iPod is different from those that are checked in settings for iPod. More are on iPod than are checked.
I thought it might be because one of my smart playlists uses another as one of the rules but one of the extras is not in any other playlist. Any ideas on what causes this? I opened up 15GB of space on iPod so space is not critical anymore.

I tried the restore button which returned the error "The iPod could not be restored. An unknown error occured (1418)". After googling this I followed these instructions on the apple website: http://docs.info.apple.com/article.html?artnum=304508
Completed all steps from 1-5 and tried to restore it again, the same error message ("1418") appears.
Windows XP Pro

Work around for adding more than 1000 notes

I'm trying to load my bible onto my iPod and it consists of 1823 notes. Is there any what to increase the default number of notes that the iPod can accept? Hack...?

I have the same problem. I don't see the use of having a bible with only part of the Old Testament.
Can anyone suggest a hack or other setting to override the iPod notes limit?
It would be muc appreciated!
I have a 30GB 5th Generation Video iPod.

Why doesn't my email inbox show more than 6 recent emails?

Please help me with the above question.

What sort of email service do you use (IMAP or POP)? If POP, are the messages you are expecting still on the server?

Difference of the results more than 1000

I have to write a procedure where if the results of the following result set varies by more than 1000 than it should sent out a paramter YES
COUNT(1)     TABLE_NM
42986     A_TBL
539     B_TBL
42986     C_TBL
42986     AD_TBL
so if the difference between the counts of any tables is more than 1000 then it should send YES.
can someone suggest?

SQL> create table tbl
2    as
3      select 42986 cnt,'A_TBL' table_nm from dual union all
4      select 539,'B_TBL' from dual union all
5      select 42986,'C_TBL' from dual union all
6      select 42986,'D_TBL' from dual
7 /
Table created.
SQL> select case count(*)
2            when 0 then 'NO'
3            else 'YES'
4          end result
5    from tbl t1,
6          tbl t2
7    where t2.cnt - t1.cnt > 1000
8      and rownum = 1
9 /
RES
YES
SQL> drop table tbl
2 /
Table dropped.
SQL> create table tbl
2    as
3      select 42986 cnt,'A_TBL' table_nm from dual union all
4      select 42980,'B_TBL' from dual union all
5      select 42950,'C_TBL' from dual union all
6      select 42970,'D_TBL' from dual
7 /
Table created.
SQL> select case count(*)
2            when 0 then 'NO'
3            else 'YES'
4          end result
5    from tbl t1,
6          tbl t2
7    where t2.cnt - t1.cnt > 1000
8      and rownum = 1
9 /
RES
NO
SQL> SY.

INDIRECT for more than 1000 Rows

Here's a puzzler!
Why does this not work for values at G6579 of more than 1000, i.e., for Cells below C1000.
=IF(G6579<=0,CHAR(32),INDIRECT("C"&G6579))
It works fine for all the rows above 6579 which find rows above C1000. The Cells in column C have values, but at Row 6579 and below, this formula generates "This formula contains an invalid reference".
Have I hit a limit on allowable INDIRECT argument values?
Dick

Dick Huitema wrote:
YVAN:
May you explain why you use CHAR(32) to define a string of one space ?
DICK:
I want the cell left blank; if there's a better way, I'm all ears. I might then be able to use the test you recommended (using LEN)... although I haven't needed one so far.
Further thoughts?
BARRY:
Previous thoughts, actually. Yvan, as he mentioned, had suggested using the empty string ( "" ) >instead of a space.
=IF(G6579<=0,"",INDIRECT("C"&1000))
Must have had your earplugs in at the time. ;-)</div>
Yup! And the sleep mask must have been on, too!
Sorry Yvan... I didn't quite understand what "empty string" meant and thought you were trying to suggest using LEN... which made no sense, of course.
An empty string is a string which contains nothing, the one defined by ""
=CHAR(32) defines a string of one space character, the one which is often created using =" "
In many tables, we need to take care of empty cells.
The true definition of an empty cell is a cell which contains nothind.
This status may be checked thanks to the function ISBLANK(theCell).
Alas, as there is no function allowing us to define the value of a cell to nothing (I'm desparately waiting for the function BLANK()) we have to use the canada dry blank cell.
My own choice is to set the content of the cell to the empty string ("") . You used the space (" ").
I described the way o check if a cell if "blank in the extended fashion"
LEN(of a true empty cell) is zero, because the length of nothing is nil.
LEN(of a cell containing "") is zero, because it's the definition of the empty string.
So, the single instruction LEN(theCell) give us the wanted informatioN
If you use the space string, the test is more complex. The one which I sdescribed was wrong because it didn't treated the case of a table using both empty strings and space strings.
It would be
=IF(OR(LEN(theCell)=0,theCell=" "),theCellIisEmpty,theCellIsNotEmpty)
Yvan KOENIG (VALLAURIS, France) lundi 12 juillet 2010 19:15:08

How to get more than 300 results for a search

Hi all,
When we search for something in a peoplesoft, we get 300 default results right.
Is there a way we can change that to 500 or 600 or any.
Please help me.
Thank you,
Bye.

I heard that we have to do some settings in psappserv.cfg file to get more than 300 rows in a search. Is that true?
Please help me.
Thank you,
Bye.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

Vector or ArrayList use for dropdown with more than 1000 entries

Hi Friends
I am having more than 1000 entries of different TimeZone's which i need to display in a dropdown list.
i am not able to decide whether i need to use a Vector or Arraylist for storing these values.
please let me know which one will be best suited to use in case the list entry is more than 1000 characters.
waiting for a positive reply from your side.
Thanks & Regards
Vikeng

A JComboBox can be constructed from a Vector (rather than any other sort of List) without having to implement your own ComboBoxModel. (JList is similar).
I agree with kajbj - a control like this with a thousand entries is rather poor interface design. One exception might be if the entries are sorted in some way, and you "jump" to the appropriate place in the list as the user types.

Update the authorization object value for more than 1000 role

I need to remove one of the activity value (06) from authorization object S_SCD0.
I do a search and found out that there are more than 1000 roles which having the activity value = 06 for authorization object S_SCD0.
However, I don't think I can create a SCAT script to update all these 1000 roles and I believe its going to be a very tedious if I am going to manually change it one-by-one. Hence, I am wondering is there any standard program/function which I can use to automate the above changes for all these 1000 over roles.
Kindly advise.
Thanks

Direct update the table is the easiest way, but should be discourage for the obvious reason.
Should take a step back, take a long term view, when you need to update 1000 roles, maybe a role redesign might be needed. For example, if you can change the role model to derive role model, once update to the parent role will take care of all the child role.
Thanks,
Lye

TS2446 hi my apple id has been disable, as i has purchased more than 1000$ from app store and i have to update my apps and also i have planning to purchased more apps i will be appreciate if you activate my apple id. i am impatiently waiting for new iphon

hi
my apple id has been disable,
as i has purchased more than 1000$ from app store and i have to update my apps and also i have planning to purchased more apps i will be appreciate if you activate my apple id.
i am impatiently waiting for new iphone.
i hope to buy many apps with this apple id and enjoy them
Viva Apple

These are user-to-user forums, you are not talking to Apple here.
Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Setting for getting more than 1000 recent emails?

Similar Messages

Maybe you are looking for