Setting Local Currency as default display in all accounting document displa

Hi,
I have a Requirement where I am looking to set Local Currency as default display in all accounting document display screen.
Can you please help me here.

Hi,
I already followed this but this is not working. I still getting the FB03 figures by default in the Document Currency only and I have to Click the Display Currency Button to see the Figures in the Local Currency.
Is there is any way by which the Document display in Local Currency only and I don't have to press Display Currency Button to see them in the Local Currency.

Similar Messages

  • Is it possible to set  Local Currency - INR in SAP B1 8.81

    Hi,
    In SAP B1 Version  8.81 , i have taken Type -Chart of Accounts - as Global
    and  Localization - United Kingdom  And just tell me is it possible to set
    Local Currency - INR in SAP B1 8.81

    Hi,
    You can set any currency till the time there is no transactions in the database.
    Please do remember that the on selection of the Localization UK, the legal aspects and the tax law pertaining to the UK will be applicable and also you have to check for the exchange rate calculation based on settings (direct/indirect).
    Also, taking INR as LC will lead to INR being the main currency and hence the reports generation and reconciliation of all the Multi-Currency will be performed in the Lead Currency.
    All the Best.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • How to set local help as default in ID CS5?

    Just received a replacement laptop w/CS5 installed & cannot figure out how to disable/turn off community help...I want it to default to local help whether connected to the net or not.
    Thanks
    Update Info:
    Or, if setting local help as default is not possible, what about turning off or disabling internet sensing by the program?  This will be used in the field and sometimes slow connections are the only thing available.  Testing it on a dial-up connection, it just set there trying to access community help without allowing access to the local help until the dial-up connection was closed.

    Thanks Peter...I'd already found that, but when I first found it, the last section was not in that screen and in playing around, I found that Air was not installed proprly, uninstalled & re-installed that & that last section with the 2 ticks showed up & selected local help.
    Next, I get a message that there is no PDF reader installed...but a working copy of AR7 is & it works...I'm thinking that CS5 should be uninstalled & re-installed, however, that will have to wait until I can get the laptop back to the company we're working for.
    The community help window indicated the local help file to be 40Meg, but a search found no PDF that large on this machine.
    Is this PDF available for direct download & I'll just access it outside of the help screen if necessary.
    Laptop/program owner is in Canada, I'm visiting in Georgia & have an overseas flight on Wednesday...

  • How to set local currency in AR/Invoice through DI API SAP B1?

    Dear Expert,
    I am using DI API to add AR/Invoice document, but I can't find how to set local currency for BP with foreign currency.
    This my code snip :
            oSO = oCompany.GetBusinessObject(BoObjectTypes.oInvoices)
            oSO.DocDate = dtpPostDate.Value
            oSO.DocDueDate = dtpDueDate.Value
            oSO.TaxDate = dtpDocDate.Value
            oSO.Series = cSeries
            oSO.DocNum = txtNumber.Text
            oSO.DocCurrency = doccur
            oSO.CardCode = txtBP.Text
            oSO.CardName = txtName.Text
            oSO.ContactPersonCode = cntctCode
            oSO.JournalMemo = txtRemarks.Text
            For i = 0 To dgv.RowCount - 2
                oSO.Lines.SetCurrentLine(i)
                oSO.Lines.ItemCode = dgv.Item(0, i).Value
                oSO.Lines.ItemDescription = dgv.Item(2, i).Value
                oSO.Lines.Quantity = dgv.Item(4, i).Value
                oSO.Lines.Price = dgv.Item(5, i).Value
                oSO.Lines.DiscountPercent = dgv.Item(6, i).Value
                oSO.Lines.TaxCode = dgv.Item(7, i).Value
                oSO.Lines.LineTotal = dgv.Item(9, i).Value
                oSO.Lines.Currency = doccur
                oSO.Lines.Add()
            Next
            lRetCode = oSO.Add()
            If lRetCode <> 0 Then
                oCompany.GetLastError(lErrCode, sErrMsg)
                MsgBox(sErrMsg, 16, "Attention")
            Else
                MsgBox("Operation completed successfully.", 64, "Information")
             End If
    When trying to Add, system show error message " Enter valid currency code [OINV.DocCur][Line:1], '$' "
    I am not lucky after trying for a day , wish enlightenment from the experts here, Thank you.
    My machine : SAP B1 9 PL 4
    Best Regards,
    Muh.Ulfah

    Hi
    In the other thread I suggested that you can add document using interface first because there is a possibility that B1 doesn't accept this currency code not because you set it improperly in your code but because of some other reason, for example this currency is not valid for this particular business partner. Despite the fact that this way you can eliminate other possible problems you can also use DI to save an existing document as XML and check what is the actual currency code that B1 itself placed in the document lines object.
    Afterwards you can again try to add document using DI.
    btw
    check this thread:
    How to set local currency in sales order for BP with foreign currency through DI?
    Kind regards,
    Radek

  • How can I set bind parameter as Default Display Value in JHeadstart

    Hi,
    I am using -
    JDeveloper Studio Edition Version 10.1.3.1.0.3984
    JHeadstart Release 10.1.3.1.26
    Can anybody help me for the following:
    I am using a super class of ViewObjectImpl where I am definning a bind parameter (Student ID) using login userid:
    if ("p_std_id".equals(bindParam[0])) {
    sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
    bindParam[1] = studentNumber_from_LDAP;
    Then I defined p_std_id in Bind Variables tab in VO Editor and used that in Where clause in the SQL Statement tab.
    This is working fine.
    Now what I want to do is:
    I want to put the value of p_std_id as Default Display Value for a field.
    Can anybody let me know how I can put the value of p_std_id in JHeadstart Application Definition?
    Thanks
    Syed Jabbar
    University of Windsor
    Windsor, ON, Canada

    Hi Jan and Steven,
    Thanks for your reply.
    I need to show the default value in the table layout.
    Steven, could you please give some more hints about EL Expression?
    To obtain the value of p_std_id now and pass it on as bind param, I am using a class extending ViewObjectImpl. Inside that class I am using the following method:
    I'd appreciate if you could help for the EL Expression.
    Thanks
    protected void executeQueryForCollection(Object Object, Object[] bindParams,
    int i) {
    String userId = ((ApplicationModuleImpl)getApplicationModule()).getUserPrincipalName();
    try{
    getLdapInfo(userId);
    catch(Exception e) {
    sLog.debug("executeQueryForCollection: Userid = " + userId);
    if (bindParams != null)
    for (int j = 0; j < bindParams.length; j++)
    Object[] bindParam = (Object[])bindParams[j];
    if ("p_user_id".equals(bindParam[0])) {
    sLog.debug("executeQueryForCollection: found bind param p_user_id, setting value to " + userId);
    bindParam[1] = userId;
    if ("p_emp_id".equals(bindParam[0])) {
    sLog.debug("executeQueryForCollection: found bind param p_emp_id, setting value to " + employeeNumber_from_LDAP);
    bindParam[1] = employeeNumber_from_LDAP;
    if ("p_std_id".equals(bindParam[0])) {
    sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
    bindParam[1] = studentNumber_from_LDAP;
    super.executeQueryForCollection(Object, bindParams, i);
    Thanks
    Syed

  • Set "Sales Office" as an authorization for all sales document

    Dear SD Expert,
            Base on ECC 6.0, I have to set authorization which check u201CSales Officeu201D in create/ change / display all sales document.
             I found that authorization object u201CV_VBKA_VKOu201D contain authorization filed ; that are, sales org, distribution, division, sales office and sales group. Also u201CV_VBKA_VKOu201D have assign to (Transaction code: VA03, VF03) as standard SAP (see in T-Code : SU24) . However, when I assign; for example, T-Code u201CVA03u201D, u201CVF03u201D in PFCG. After generated profile, only u201CSale org, distribution chan., and divisionu201D is pop-up.  I wonder that
    1)     Why u201CSales officeu201D dose not show in u201Corganization levelu201D ?
    2)     How can I set u201CSales Officeu201D as an organization level?  for checking an authorization
    Please give me step-by-step.
    Regards,
    Prach

    Refer SAP Help url it may help you , I did not work on this,[Maintain authorizations|http://help.sap.com/saphelp_45b/helpdata/en/91/6cec6eb435d1118b3f0060b03ca329/content.htm]

  • Difference in currency rate between customer order and accounting document

    Dear gurus,
    While I am cretaing customer order SAP calculates currency from Exchange Rate="B" at OB08 screen. This situation results because of Currency type in customer master data. But in the accounting document SAP calculates currency from Exchange Rate="M" at OB08 screen. As a result; this is causes problems.
    I want SAP to calculate currency which is entered in customer master data. It might be M,B etc.. According to the CUSTOMER.
    How can I fix this issue?
    Thnks regards,

    Hi,
    In the copy routine from Sales Order to Billing, copy the exhcange rate from sales order.
    And then the billing will get the same exchange rate as in sales order and thus will also pass the same to the accounting.
    Regards,
    SDNer

  • Setting Printer Acrobat XI Default to print all PDF files last page first

    Hello,
    I have just recently upgraded to Mavericks and also have the Creative Cloud using Acrobat XI Pro. In using Reader 9, whenever I printed a PDF the output would print in reverse order, so all I would have to do is take it from the printer and hand it off; it would be in the correct order. How do I setup Acrobat XI Pro to accomplish the same settings (print in reverse order) on not only 1 PDF, but all PDF files? Any assistance would be greatly appreciated.
    Thanks,
    John

    Can a print preset be created that would work for all PDF files and not just the one opened? Just trying to find out since no one has answered my question in 2 days and Tech Support wasn't much help.
    Thanks,
    John

  • Setting english as the default language for a new document with arabic version of CC apps

    first off, appologies for the screen name, the name i'm sure i had registered before with account was suppose dot be looged in as was barred, so i used this in frustration.  Read the book, The Etymologicon to learn more.
    and another note.  why is the font size in the subject on this form gigantic? intentional of cockup?
    Now, to the point.
    Please please enlighten me, I'm sure it's simple but i can't find the answer and have been haphazardly ploughing the net for half the night.
    I have installed the Arabic langauge version of CC software becuase i need to do a lot of bilingual layouts.
    But
    I generally use, and start with english, but the defualt new document is always set to all the arabic settings, which is a nightmare.
    How do i make english the defualt type (and all the paragraph and language options) while retaining the functionaility of arabic version. 
    I've found instructions for CS2-6 but nothing remotely sensible about CC, and presume i'm missing something really really obvious.

    Hi,
    Here you have some interesting tutos about foreign languages in LV :
    Localizing Your LabVIEW Application to Different Languages
    Localize LabVIEW Applications in Multiple Languages
    Let me know what happens.
    Regards,
    Message Edité par Steve Mohamed le 02-27-2009 09:02 AM
    Steve M.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

  • Setting up public folders in Outlook for all accounts

    First of all apologies if I've put this under the wrong topic or anything; this is my first post.
    What I'd like to be able to achieve in Outlook is to have a shared folder that appears in the Mail view called "Contracts", which will have hundreds of subfolders such as "3457 - Aurora", that will appear in all our Outlook accounts,
    so users can drag emails into them.
    Then when someone receives an email regarding a particular contract, they can drag it into the appropriate shared folder, so everyone can see all emails regarding that contract.
    I'm sure this isn't that unusual a request, but I can't figure out the best way to achieve it.
    Most of our employees use Outlook 2007, some have 2010 and some 2013.
    Our mail server runs SBS2011
    I've tried using the Public Folder Management Tool in the Exchange Management Console, and that's the best outcome I've had so far; however, it only shows up in the Folder view in Outlook and not under mail.
    Thanks,
    Phil

    Hello,
    The “Contracts” is not a default mailbox folder. The best solution I can think of it to have a shared public folder to achieve your requirement.
    Thanks,
    Simon Wu
    TechNet Community Support

  • ECC6 - Invoice Cancellation has not reversed all accounting documents.

    An Vendor Invoice was created in P12 2008 which has generated 2 accounting documents, one relating to the invoice in year 2008 and another in 2009 for revaluations.
    An Invoice Cancellation was then entered in MR8M which has only reversed the accounting document for 2008.
    I cannot reverse the 2009 accounting document separately because it relates to a PO, and I cannot re-cancel the invoice in 2009 because it is a 2008 document.
    Before I log this as a product problem, can anyone offer advice on how to proceed?
    Thanks

    Unfortunately, FB08 won't work as the original document wasn't posted in FI.

  • Only balance in local currency

    Hi
    our base currency is UDS. One of the GL ( bank account in Germany ) is set up as document currency ( euro ) and " only in local currency " check box  is unchecked ( FS00 , control tab ). Now  when I try to load the plan data into system, all the values goes well except this GL. I used manual entry to load the value (Gp12 ) into this GL (plan ).It did not work.
    Now I tried to change the check box ( FS00 ) but it does not allow as there is balance into that. First I am not clear why this one account was set up like that.Can anybody suggest me how to fix this "only local currency" issue.
    Thanks
    Satya

    Hi Satya,
    Since you have created the g/l account with account currency EUR and which is different from your company code currency (USD) it will only accept the postings in EUR. If an account is set up in company code currency then it will accept postings in all currencies. Usually bank accounts are maintained in currencies other than company code currency and in this case I am not sure why you have created a P&L account in currency other than Company code currency.
    The indicator "Only balances in local currency" controls the display of balances via FS10N transaction and if you have unchecked that indicator then system should supposedly display the balances by transaction currency but in your case since, your account currency is EUR and the g/l account can only accept postings in EUR it doesnt really matter because it will only display balances in EUR since all the postings going to the above account will be only EUR.
    As far as ur problem is concerned; looks like u r loading numbers in currency other than EUR and that is why it is bombing out. You have to zero out the balance in the account first and then have to change the account currency to USD if you want to plan in diff currencies on that account.
    Plz assign points if useful
    Thanks
    Kumar

  • Does setting multi currency and fixed foreign currency make a difference ?

    Hi all,
    My customer deals in foreign currency say USD, where as local currency is INR.
    Now I want to know that what all difference SBO will make if in one scenario I set the Inventory GLs currency as Multi currency and in second scenario I set the Inventory GLs currency as USD ?
    Regards,
    Samir Gandhi

    Hi Samir,
    in essence, an account/BP that is set up as multicurrency (MC) is local currency (LC) in disguise. All transactions are held in the application in LC, the display is merely informational according to the exchange rate defined for the posting date. The reconciliation currency is LC.
    A foreign currency (FC) account/BP will only accept transactions in this FC. The LC equivalent is automatically calculated, but the reconciliation currency is FC. Exchange rate differences are used to adjust LC according to the rate at the execution date.
    If you use a particular bank account for trading with a particular foreign country, the account currency & the BP currency should be set to a single FC. If a particular bank account is used to deal with various BPs using various currencies, that account should be set up as MC, yet we would recommend you set the BP as single FC.
    There are some relevant Expert Empowerment Sessions available in the archive:
    [Exchange Rate|http://service.sap.com/~sapidb/011000358700000315572008E.zip]
    [FC & SC are the same, why don't they match?|http://service.sap.com/~sapidb/011000358700000326672008E.zip]
    Also, please have a look at the Expert on Phone Newsletter May2008:
    [How to reconcile a foreign currency only journal entry for a multi-currency Business Partner|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25494259]
    All the best,
    Kerstin

  • S_ALR_87012247 - Customer Balances and Line Items in Local Currency

    Hi All,
    This report S_ALR_87012247 - Customer Balances and Line Items in Local Currency  is not displaying line items for customers in ECC6. Is there any configuration required to get the line items? Please help
    Thanks
    Sridevi

    If you see this report S_ALR_87009950, you will get
    Opening Balance at the start of fiscal year
    Debits and Credit during the reporting period
    and the Cumulative Balance.
    Please note the above report will not give you line item details.
    S_ALR_87012247 report is specifically for poland, in the description it is mentioned that the line items will be displayed, unfortunately, for other countries, there are no line items visible. Therefore, you may explore the possibility of copying this report and changing the code in order to bring the line items along with the totals.

  • Change of local currency amount in park document

    Dear SAP Experts,
    I have some queries regarding the local currency in parked document.
    Here are the steps to generate the issues:
    1. Enter vendor invoice using FB01 tcode. E.g the company code currency is MYR, then change the document currency to USD.  Maintain both debit and credit leg for the document. Please enter more than one expense account with different amount at debit side.
    Enter the amount in document currency (in this example is USD) field and enter. System will populate the local curreny (in this case is MYR) based on the table currenct updated in the system.
    At this point, the local currency (MYR) need to be changed based on user's requirement. In this case,they will be some deviation of currency rate since user has manually entered the desired amount for local currency.
    2. Park the document once finished.
    3.Goto transaction FBV0 and open the parked document.
    4. You can see the ammended local currency amount still populated correctly in local currency field.
    5. Post parked document.
    6. Display the document posted and see that the local currency amount has been changed to the amount based on table rate in system.
    Queries:
    a. Is there any way to make sure that the ammended amount would not be changed after the document has been parked and then get posted? Please be informed that this scenario would not happened if the document is directly being posted without parked.
    b. If the exchange rate at document header is being changed based on the desired amount of local currency, this would not be an issue. Since the requirement is only to change the local currency amount at GL level and not at Vendor line item. But at the end the total ammended amount at GL level has to be equal to the vendor total amount. how to resolve this issue? Can standard SAP process/configuration can catered this scenarios..?
    Thanks a lot for you help.
    Your kind cooperation is highly appreciated.
    Kind regards,
    Yuzeila

    Hi SAP experts ,
    My situation is the same - to park GL documents by uploading from a file  and then edit the local currency amount if necessary.
    However in my case we have an excel sheet generated from an external system and our users want to upload them and park all the journals  at a single time.
    We are using RFBIBl0 direct input program to upload the file and park then transaction using FBV1.  Alll the documents are parked with the data  as in the excel sheet. 
    Next step is that the users go to FBV0 to edit the parked documents and sometimes it is required to change the local currency based on the current exchange rate and then post the journal  .
    However when the parked documents are edited using FBV0 the local currency amount entered by the user is ignored and the system still  overwrites it with  the system calculated amount .
    b. As per your suggestion - I cannot use FV60 using direct input program as FV60 transaction is not supported.
    Please can you suggest if there is any way to park the Gl documents in background  from a file  and then edit the parked documents as required i.e change amounts and other fields.
    You help is much appretiated.
    Thanks and Regards,
    Aarthi

Maybe you are looking for