Setup Port Mapping

Question

For the life of me, I cannot see anywhere on Airport Utility a place to set port mapping for an airport extreme. I need to setup port 80 and there is no documentation ANYWHERE online to do that. I see one site which shows a tab on airport utility that says port mapping, but I guess that was killed in an upgrade cuz it ain't on mine!!!! Any help would be great

Answer 1

Try the following basic procedure to configure port mapping on the 802.11b/g AirPort Extreme Base Station (AEBS):
Port mapping, under Leopard with the 802.11g version of the AEBS, will require at least two steps:
1) Assign a static IP address for the host computer that will be accessed from the Internet.
2) Configuring port mapping on the AEBS.
1. Assign a static IP to the host device
System Preferences > Network > Show > AirPort > TCP/IP
o Configure IPv4: Manually
o IP Address: <choose an IP address outside of the AEBS's DHCP range: 10.0.1.2 - 10.0.1.200>
o Subnet Mask: 255.255.255.0
o Router: 10.0.1.1
o DNS Servers <your ISP DNS server IPs>
To setup port mapping on an AEBS, either connect to the AEBS's wireless network or temporarily connect directly, using an Ethernet cable, to the LAN port of the AEBS, and then use the AirPort Utility, in Manual Setup, to make these settings:
2. Setup Port Mapping on the AEBS.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"