SetupComplete.cmd detect installation type: install or repair or upgrade

Is SetupComplete.cmd executed for every Windows 7 installation type: fresh install, repair install, and upgrade install?
How can I detect via the script which installation type is being done?

Hi,
Have you checked this article?
Add a Custom Script to Windows Setup
After Windows is installed but before the logon screen appears, Windows Setup searches for the SetupComplete.cmd file in the %WINDIR%\Setup\Scripts\ directory. If a SetupComplete.cmd file is found, the file is executed. Otherwise, installation continues
normally. Windows Setup logs the action in the Setupact.log file.
This is how it works after Windows Setup Completes.
And if Windows Setup Encounters a Fatal Error and is prevented from completing the installation, Windows Setup searches for a command script in the following directory: %WINDIR%\Setup\Scripts\ErrorHandler.cmd. One of two actions will occur, depending
on whether the script is found.
If the script is not found, a dialog box is displayed with the error text. A user must dismiss the dialog box before Windows Setup exits.
If the script is found, the script executes synchronously. No dialog box or error text is displayed. After the ErrorHandler.cmd script completes, Windows Setup exits.
For more detailed information, please take a look in the article above.
Regarding the second question about script which installation type is being done, based on what I know, there seems to be no such scripts I could found out. for the installation type, we could take a look in the windows setup log to check the differences.
Here is some information regarding the windows set up logs:
Windows Setup Log Files
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Similar Messages

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

OUI does not detect RAC installation while installing 10.2.0.3

Hello all,
I have a 2 node rac on 10.2.0.2 on Solaris 10.
The other day when i tried to upgrade them to 10.2.0.3, the installer was not detecting
installation as a RAC(the cluster nodes were not shown), but as single installation. Even 'opatch lsinventory' didnt show the rac details which it was supposed to show in a RAC. So i have left my CRS with 10.2.0.3 and RDBMS as 10.2.0.2.. Seems like inventory got screwed, but not sure.
I am not sure how this installation was done.
A friend of mine said that there could be another means of installing RAC other than letting the OUI itself to copy the files to the node2 while installation and that is why it doesn't show the RAC details.
Is it possible to have Oracle Single instances on 2 machines to act as a rac by doing some changes?
Could someone let me know the different methods of setting up RAC (other than the default method of letting the OUI to do the part.) ?
Will there be some problem if i proceed installing 10.2.0.3 even if the OUI does not identify it as a rac installation?
TIA,
JJ

Hi,
myuolicdbd01 [SHCL1N01]$ ./opatch lsinventory -oh $ORA_CRS_HOME
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /u01/app/oracle/product/crs
Central Inventory : /u01/app/oracle/oraInventory
   from           : /u01/app/oracle/product/crs/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.3.0
OUI location      : /u01/app/oracle/product/crs/oui
Log file location : /u01/app/oracle/product/crs/cfgtoollogs/opatch/opatch-2007_Dec_04_15-33-47-JST_Tue.log
Lsinventory Output file location : /u01/app/oracle/product/crs/cfgtoollogs/opatch/lsinv/lsinventory-2007_Dec_04_15-33-47-JST_Tue.txt
Installed Top-level Products (2):
Oracle Clusterware                                                   10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 2                            10.2.0.3.0
There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
Rac system comprising of multiple nodes
Local node = myuolicdbd01
Remote node = myuolicdbd02
OPatch succeeded.
myuolicdbd01 [SHCL1N01]$The below is for the RDBMS home and it does not show the node list.
myuolicdbd01 [SHCL1N01]$ ./opatch lsinventory -oh $ORACLE_HOME
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /u01/app/oracle/product/10.2.0/db_1
Central Inventory : /u01/app/oracle/oraInventory
   from           : /u01/app/oracle/product/10.2.0/db_1/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.2.0
OUI location      : /u01/app/oracle/product/10.2.0/db_1/oui
Log file location : /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/opatch-2007_Dec_04_15-34-22-JST_Tue.log
Lsinventory Output file location : /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/lsinv/lsinventory-2007_Dec_04_15-34-22-JST_Tue.txt
Installed Top-level Products (2):
Oracle Database 10g                                                  10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 1                            10.2.0.2.0
There are 2 products installed in this Oracle Home.
Interim patches (2) :
Patch 5490848      : applied on Thu Nov 16 01:26:37 JST 2006
   Created on 5 Oct 2006, 10:16:33 hrs US/Eastern
   Bugs fixed:
     5407466, 5092134, 4925103, 5099995, 5079037, 5242650, 5079038, 4604970
     4763768, 4523125, 5225799, 5490937, 5490848, 4669305
Patch 5117016      : applied on Wed Jul 19 19:48:22 JST 2006
   Created on 30 Mar 2006, 12:52:17 hrs US/Pacific
   Bugs fixed:
     5117016
OPatch succeeded.
myuolicdbd01 [SHCL1N01]$Details of the Cluster Verification Utility
==============================
myjpsuolicdbd01 [SHCL1N01]$ cluvfy stage -post crsinst -n myuolicdbd01,myuolicdbd02
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "myuolicdbd01".
Checking user equivalence...
User equivalence check passed for user "oraprd".
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Liveness check passed for "CRS daemon".
Checking daemon liveness...
Liveness check passed for "CSS daemon".
Checking daemon liveness...
Liveness check passed for "EVM daemon".
Checking CRS health...
CRS health check passed.
CRS integrity check passed.
Checking node application existence...
Checking existence of VIP node application (required)
Check passed.
Checking existence of ONS node application (optional)
Check passed.
Checking existence of GSD node application (optional)
Check passed.
Post-check for cluster services setup was successful.TIA,
J J

Which components will be installed by different client installation type?

Where can I find the list of components installed by InstantClient, Administrator, or Runtime installation type of Oracle Client Installer?
The Available Product Components screen of Custom installation type shows the following components. Which of them will be installed by InstantClient, Administrator, or Runtime?
Oracle SQLJ
Oracle Database Utilities
Oracle Java Client
SQL*Plus
Oracle JDBC/THIN Interfaces
Oracle Internet Directory Client
Oracle Call Interface (OCI)
Oracle Programmer
Oracle XML Development Kit
Oracle Advanced Security
Enterprise Manager Minimal Integration
OLAP Analytic Workspace Manager and Worksheet
Oracle Net
Oracle Connection Manager
Oracle Net Listener
Oracle Multimedia Client Option
Oracle ODBC Driver
Oracle Clusterware High Availability API
Oracle SQL Developer
Oracle Scheduler Agent
Oracle Services For Microsoft Transaction Server
Oracle Administration Assistant for Windows
Oracle Counters for Windows Performance Monitor
Oracle Objects for OLE
Oracle Provider for OLE DB
Oracle Data Provider for .NET
Oracle Providers for ASP.NET

Pl do not post duplicate threads - How to find out what I have selected after I have installed Oracle Client?

Providing configuration file for SQL 2012 Express installation which installing HPC 2012 R2

Hi guys,
I need to know if there is any way to provide configuration file for SQL 2012 Express installation which installing HPC 2012 R2?
I am scripting installation on HPC 2012 R2 with default SQL 2012 Express edition but I am not able to find any option to provide a configuation file for SQL 2012 Express installaiton.
Thanks,
Vivs.

Hi Vivs,
As my understanding, you want to generate a configuration file and install SQL Server 2012 express edition using that configuration file.
If that is the case, firstly, you could generate the configuration file following the steps below since express edition is run in AutoAdvance mode which skips "Ready to Install" page.
1.Double-click SQL Server installation file in your local drive, you will see that the file will be extracted to a temporary folder. Please make a note of what directory it is extracted to. For example, it could be in c:\ followed by a folder name which
will be a set of random letters and numbers "gy7h8hjhhj67rfs7".
2.Cancel installation. Then click on the Start button on the task bar, click run, type the command cmd.exe, and go to that directory via cmd.
3.Execute the following command: setup.exe /ACTION=INSTALL /UIMODE=Normal
4.Follow the wizard through to the 'Ready to Install' page. The path to the configuration file is specified in the 'Ready to Install' page in the configuration file path section.
5.Cancel the setup without actually completing the installation, to generate the INI file.
Secondly, to install SQL Server using Command Prompt, go to the SQL Server installation media root (the temporary folder) from the command prompt and specify the ConfigurationFile.ini as a parameter as shown below.
Setup.exe /ConfigurationFile=ConfigurationFile.INI
For more information about the process, please refer to the article:
http://www.mssqltips.com/sqlservertip/2511/standardize-sql-server-installations-with-configuration-files/
Regards,
Michelle Li

Error while connecting to DB, when checking installation type of NW04S-Inst

Hi,
i installed a new netweaver 04s - system on sles10sp2 as distributed system.
SCS is ok, Database DB6 installation is also successfull.
Now i install the central instance, but when sapinst checks the installation type (i select nothing), the installation failed with:
Execution of the command "/usr/lib64/jvm/java/bin/java -classpath /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib/launcher.jar -showversion com.sap.engine.offline.OfflineToolStart com.sap.inst.jsourcecheck.JSourceCheck /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib/iaik_jce.jar:/mnt/sapcd/NW04S_SR2n/BS_2005_SR2_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/jsourcecheck.jar:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib:/home_sap/db2i33/sqllib/java/db2jcc.jar:/home_sap/db2i33/sqllib/java/db2jcc_license_cu.jar -systemName I33 -ssPropFile /usr/sap/I33/SYS/global/security/data/SecStore.properties -ssKeyFile /usr/sap/I33/SYS/global/security/data/SecStore.key -trace all" finished with return code 101. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.path)
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.ibm.db2.jcc.b.SqlException: [ibm][db2][jcc][t4][2013][11249] Connection authorization failure occurred. Reason: User ID or Password invalid.
        at com.ibm.db2.jcc.c.b.i(b.java:2002)
        at com.ibm.db2.jcc.c.b.c(b.java:1657)
        at com.ibm.db2.jcc.c.bb.r(bb.java:792)
I see the reason, but i don't know which user is mean ?
Can anyone help me ?
Best Regards,
Tom

This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini

TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra

I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Surface Pro 3 / "Windows did not detect a properly installed network adapter"

Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
Ethan

Hi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Wipe for resale - have no install or repair disks

I am ready to sell my old iBook on eBay, but of course I need to wipe it first. I bought it used, and it did not come with ANY install or repair disks. How can I wipe it without those?

The idea to make another OS X user account (admin level) is good, if the old iBook has an
OS X 10.1 ~ 10.3 installed on its hard disk drive. As suggested, this requires certain steps.
What kind of OS does it have? OS 9.x can be easy if you have some basic utilities. If there
is a mac user group or a used computer store around with Macs, talk to someone about
this matter. Sometimes, you can find Mac OS discs in charity thrift stores; or craigslist ads.
If no OS X in the computer... and you just want your stuff totally wiped:
If you have access to another Mac with FireWire ports, a dual-end FireWire cable could
be used to connect two FW capable Macs; and then boot this iBook G3 into FireWire
*Target Disk Mode*, to use the other Mac's Disk Utility, to secure erase the iBook's internal
hard disk drive; then be sure the partition map is Apple Partition Map, (APM) & reformat
the hard disk drive to HFS+ (journaled) so at some later time, someone would be able
to install a working OS 9.2 or OS X 10.2 on the computer by simply using an install CD.
Without the discs, you can't totally erase everything; and if you use a different system
than one may expect in the computer to erase it, then another new owner may be lost.
{And you can't use an older installer disc than the computer; it has to be either the exact
version it would have shipped with when new, or a retail full install newer than the Mac.
Since the model you have there, usually has a CD-ROM or CD-RW drive, an OS X
version would have to be a Retail set on several CDs. Not one from a different Mac.}
The software set the computer shipped with would be about the best to have with it;
and to have sold that without its original Apple install/restore software packet was not
responsible. The software is an official part of the computer sale, to be included.
With the iBook G3 (white model?) erased and reformatted, anyone with a retail OS 9.2.1
CD could install a working system fairly easy. A few downloads to update that to 9.2.2
are online; but there are no official sources to download the whole OS 9.2 installer and
the OS is no longer available from Apple directly. Some resellers may have suitable disc
sets, or retail ones newer than the computer, which may be supported by the hardware.
You may be able to find information about the install disc set (missing) through use of the
database download from MacTracker: http://mactracker.ca & online @ http://everymac.com
There are Identify by serial number web sites; where build info about your Mac can be found
to help further detail the specific hardware configuration (& help find suitable OS disc sets.)
Once the computer is erased and formatted correctly, it may be possible install a test
OS 9.2 system on there, since OS 9 supports 'drag and drop' installation; this may be
possible if the file were in another computer connected by FireWire (target disc mode.)
There are several means of working around issues specific to older systems & hardware;
so if you have time and interest, the answers are available in greater detail - if needed.
If you can erase & reformat the old iBook, someone could install/restore an OS later.
Good luck & happy computing!

How to check installation type in OBIEE

Hi all,
I need to upgrade OBIEE 11.1.1.5 to OBIEE 11.1.1.7. OBIEE 11.1.1.5 was installed by other person.
In-Place upgrade is not possible in simple install.
I need to check the installation type in OBIEE 11.1.1.5.
Kindly guide me as soon as possible.
Thanks in advance.

Hi
I referred the below document which provided the screenshot of the simple install
http://gerardnico.com/wiki/dat/obiee/installation_11.1
In that link as a part of simple install, he is getting the analytics port as 9704 and not as 7001 like you said below
>>If it is 7001 it is Simple installation.
Kindly confirm.
Thanks
RR

End of installation without installing the application

Hi..
I am installimg oracle apps on windows 2000 server. After completing the successfull pre installation checks, I go for installation and it asks following:
1-file location for source and destination
2-installation type - complete(29MB) - choosen
3-summary screen comes with oracle installation products such as global setting, language, space requirements, installed 2 products (java runtime environment,oracle universal installer)
4-end of installation screen comes up
when i saw the progress screen it was only finished 12% and step 1 was running "executing system command"
anyone please help me in this regards...
Thanks in advance...

(i) log file is below
installActions2007-07-14_02-07-13-AM.log
Environment variables:
     ORACLE_HOME =
     PATH = C:\gnumake\make-3.79.1\WinRel;C:\MKS\bin;C:\MKS\bin\x11;C:\MKS\mksnt;C:\JAVA\JDK1.3.1\BIN;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem
     CLASSPATH =
Username is: applmgr
The specified response file C:\Documents is not found.*** Welcome Page***Can't find license file: E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\install\win32/../licence.txtSetting value of FROM_LOCATION to E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jarSetting value of SHOW_COMPONENT_LOCATIONS_PAGE to trueSetting value of SHOW_CUSTOM_TREE_PAGE to trueSetting value of SHOW_SUMMARY_PAGE to trueSetting value of SHOW_INSTALL_PROGRESS_PAGE to trueSetting value of SHOW_REQUIRED_CONFIG_TOOL_PAGE to trueSetting value of SHOW_OPTIONAL_CONFIG_TOOL_PAGE to trueSetting value of SHOW_RELEASE_NOTES to trueSetting value of SHOW_END_SESSION_PAGE to trueSetting value of SHOW_SPLASH_SCREEN to trueSetting value of SHOW_WELCOME_PAGE to trueSetting value of SHOW_ROOTSH_CONFIRMATION to trueSetting value of SHOW_EXIT_CONFIRMATION to trueSetting value of NEXT_SESSION to trueSetting value of NEXT_SESSION_ON_FAIL to trueSetting value of FROM_LOCATION to E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jarSetting value of ORACLE_HOME to C:\OraHome1Setting value of ORACLE_HOME_NAME to OUIHomeSetting value of INVENTORY_LOCATION to C:\Program Files\Oracle\Inventory
*** File Locations Page***FromLocation = FROM_LOCATION = E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jarToLocation = ORACLE_HOME = C:\OraHome1ToName = ORACLE_HOME_NAME = OUIHomeInitializing installer access setupSetting value of ToplevelComp to oracle.swd, 1.7.1.10.0, >0.0, [ 912 ][OH:0]Setting value of SELECTED_LANGUAGES to [en]Doing operation for installer access setupInitializing inventory setup WCCEUnable to read C:\Program Files\Oracle\Inventory/Contents/OracleHomesList.ser. Some inventory information may be lost.Unable to read C:\Program Files\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
The installer version is 1.7.1.10.0
Unable to read C:\Program Files\Oracle\Inventory/Contents/CompsList0.ser. Some inventory information may be lost.
Unable to read C:\Program Files\Oracle\Inventory/Contents/PatchesList0.ser. Some inventory information may be lost.
Setting value of ORACLE_HOME to C:\OraHome1
Setting value of ORACLE_HOME_KEY to Software\ORACLE\HOME0
Setting value of ORACLE_HOME_FOLDER to Oracle - OUIHome
Setting value of ORACLE_HOME_SERVICE to OUIHome
Doing operation in inventory setup WCCE
Setting value of SELECTED_LANGUAGES to [en]
*** Available Products Page***
TopLevelComp = ToplevelComp = oracle.swd, 1.7.1.10.0, >0.0, [ 912 ][OH:0]
LangsSel = SELECTED_LANGUAGES = [en]
Setting value of ToplevelComp to oracle.swd, 1.7.1.10.0, >0.0, [ 912 ][OH:0]
*** Installation Types Page***
DepMode = DEP_MODE = null
TLDepModes = TLDepModes = null
The selected install type is "null"
Setting value of ToplevelComp to oracle.swd, 1.7.1.10.0, >0.0, [ 912 ][OH:0]
Setting value of SELECTED_LANGUAGES to [en]
*** Available Products Page***
TopLevelComp = ToplevelComp = oracle.swd, 1.7.1.10.0, >0.0, [ 912 ][OH:0]
LangsSel = SELECTED_LANGUAGES = [en]
Doing operation in inventory setup WCCE
Doing operation for installer access setup
Setting value of FROM_LOCATION to E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jar
*** File Locations Page***
FromLocation = FROM_LOCATION = E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jar
ToLocation = ORACLE_HOME = null
ToName = ORACLE_HOME_NAME = null
*** Welcome Page***
Can't find license file: E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\install\win32/../licence.txt
Setting value of FROM_LOCATION to E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jar
Setting value of ORACLE_HOME_NAME to
Setting value of ORACLE_HOME to E:\OraHome1
Setting value of SHOW_COMPONENT_LOCATIONS_PAGE to true
Setting value of SHOW_CUSTOM_TREE_PAGE to true
Setting value of SHOW_SUMMARY_PAGE to true
Setting value of SHOW_INSTALL_PROGRESS_PAGE to true
Setting value of SHOW_REQUIRED_CONFIG_TOOL_PAGE to true
Setting value of SHOW_OPTIONAL_CONFIG_TOOL_PAGE to true
Setting value of SHOW_RELEASE_NOTES to true
Setting value of SHOW_END_SESSION_PAGE to true
Setting value of SHOW_SPLASH_SCREEN to true
Setting value of SHOW_WELCOME_PAGE to true
Setting value of SHOW_ROOTSH_CONFIRMATION to true
Setting value of SHOW_EXIT_CONFIRMATION to true
Setting value of NEXT_SESSION to true
Setting value of NEXT_SESSION_ON_FAIL to true
Setting value of INVENTORY_LOCATION to C:\Program Files\Oracle\Inventory
Setting value of UNIX_GROUP_NAME to
*** File Locations Page***
FromLocation = FROM_LOCATION = E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jar
ToLocation = ORACLE_HOME = E:\OraHome1
ToName = ORACLE_HOME_NAME =
*** Welcome Page***
Can't find license file: E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\install\win32/../licence.txt
Setting value of FROM_LOCATION to E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jar
Setting value of ORACLE_HOME_NAME to
Setting value of ORACLE_HOME to E:\OraHome1
Setting value of SHOW_COMPONENT_LOCATIONS_PAGE to true
Setting value of SHOW_CUSTOM_TREE_PAGE to true
Setting value of SHOW_SUMMARY_PAGE to true
Setting value of SHOW_INSTALL_PROGRESS_PAGE to true
Setting value of SHOW_REQUIRED_CONFIG_TOOL_PAGE to true
Setting value of SHOW_OPTIONAL_CONFIG_TOOL_PAGE to true
Setting value of SHOW_RELEASE_NOTES to true
Setting value of SHOW_END_SESSION_PAGE to true
Setting value of SHOW_SPLASH_SCREEN to true
Setting value of SHOW_WELCOME_PAGE to true
Setting value of SHOW_ROOTSH_CONFIRMATION to true
Setting value of SHOW_EXIT_CONFIRMATION to true
Setting value of NEXT_SESSION to true
Setting value of NEXT_SESSION_ON_FAIL to true
Setting value of INVENTORY_LOCATION to C:\Program Files\Oracle\Inventory
Setting value of UNIX_GROUP_NAME to
*** File Locations Page***
FromLocation = FROM_LOCATION = E:\STAGE11I\redCD\Disk1\rapidwiz\oui\NT\stage\products.jar
ToLocation = ORACLE_HOME = E:\OraHome1
ToName = ORACLE_HOME_NAME =
*** Welcome Page***
Warning :*** Alert: Do you really want to exit? ***
User selected: Yes/OK
*** Welcome Page***

How to use Setupcomplete.cmd when deployment windows 8.1 by WDS

Dear all,
        I'm trying to install win8.1 by WDS.I've put the setupcomplete.cmd file in C:\remoteinstall\images\imagegroup1\<my inage name>\Setup\Scripts but when OS insatll finished ,the CMD file did not execute.And I
can not found Scripts folder under C:\windows\setup.
        PS: there are no < my imagename> under imagegroup1 folder,I build it by myself.
        Any one can help me to solve it?
        Thanks
Best regards

Hi,
Meanwhile, Windows setup log this action under C:\Windows\Panther\Setupact.log, please check this log or upload it to OneDrive, then paste the download link here for further analysis.
http://technet.microsoft.com/en-in/library/hh825167.aspx
Yolanda Zhu
TechNet Community Support

Pre installed lion repair without Internet connection

Hello
I am having a nightmare, Purchased a brand spanking new 27inch with Lion pre - installed three weeks ago,I like to reinstall to get rid of Garageband and such that I dont need or use, to do this you need to use Recovery HD and then it will reinstall without those mentioned and it will allow you to download them via appstore if and when you want to put them on, fine, however if you have intermitant broadband issues like I and many others have or no broadband at all you are screwed!!! if something bad happens and you need to reinstall and have no internet connection how the **** are you supposed to repair, I spoke with a chap from applecare who understood my predicament,who expalined the following if such a case arises:
1. Take it to a friend who as a internet connection so it can download the lion to be repaired or reinstalled .
2. Take it to a apple re seller to so it can download the lion to be repaired or reinstalled .
3. To burn a copy to a USB to run lion from???
4. Check the internet for alternative methods to create a thumb drive.
Great stuff hey : )...
I explained to him that the Mac had cost me around £1500 so at least I should have the option of downloading a copy from the app store so I could burn to usb, I was told I should be able to do this but then got back to a day later to explain that because it was pre installed I dont have it on my app store account and I only have the Hidden Recovery Partion that needs the internet.
I dont know about you guys but I like to have my own copy to repair and install if any scenario arises, let's say I live in the country and have no internet connection and my mac suddenly stops working, what I would do on my old mac is to boot to dvd and repair or reinstall, not a option here I am afraid,because if you dont have a internet connection you cannot repair. I was told I can either buy a copy from the app store and then burn to USB or order the Lion on a USB thumb drive thus costing more money, it's the principal of paying for Lion when they should allow you to download it free from your account as you have paid for the system in the cost of the Imac.
Below are the ways of making a thumb drive that involves purchasing Lion to begin with:
Option 1: Put a full bootable Lion installation on the USB Drive with a recovery partition.
What you need: an 8G thumb drive and OS X Lion from the App Store.
What you get: A USB stick you can boot off and repair your Lion installation from.
Download the Lion installer from Apple App Store. DO NOT INSTALL IT ONTO YOUR COMPUTER OR THE INSTALLER WILL DELETE ITSELF. MAKE A COPY OF THE INSTALLER. If you have already installed it and it has deleted itself, go back into the App store and click on ‘purchases’ and next to Lion it will say ‘Installed’. Now option-click on ‘purchases’ and ‘installed’ will change to ‘install’ so that you can re-download the installer.
Format your Thumbdrive using a GUID Partition Table, and ‘ Mac OS Extended (Journaled)’, then you can run the Lion installer and install Lion onto the thumb drive.
More info here: http://support.apple.com/kb/HT4718
Option 2: Create a Lion Recovery Disk.
You’ll only need a 4G USB Drive for this option.
What you get: A USB stick you can repair your Lion installation from, but not run Lion from.
If your Macintosh has an existing Lion Recovery partition (this will be the case if Lion came pre-installed on your machine when you purchased your computer from Apple), you can use this method. It will not be a full installer but it will use the internet to install Lion onto another computer. It involves downloading a program from apple called ‘Lion Recovery Disk Assistant’
More info here: http://support.apple.com/kb/DL1433
To test if you have a Lion recovery partition, Just hold down Command-R during startup and Lion will give you the option of going into recovery mode if the recovery partition is there.
Option 3: Make a Lion Installation USB Thumb drive like the one you buy from Apple.
What you get: A USB stick you can install Lion from – like the one that comes from Apple.
You’ll need an 8G USB thumbdrive.
1. Purchase and download the Lion Installer via the App store as in Option 1 above.
2. Right-click on the installer and select “Show Package Contents” and find the file called ”InstallESD.dmg” in the SharedSupport folder.
3. Use Disk Utility to ‘Restore’ this dmg file to a thumb drive to make a Lion Installation USB drive like you buy from the Apple Store. (the thumb drive must first be formatted as Mac OS Extended (Journaled) with GUID Partition Table.)
What are your opinions on this, please don't have a go, I am pointing out a flaw and a bloody great at that in my opinion.
Cheers
J

By the way I am not having a go at Apple just pointing out a scenario I am going through at the moment and if anyone else is having the same issue, and I am aware that you dont need to reinstal Lion to trash Garageband, I would like to know your thoughts and alternatives apart from the ones mentioned above.
Cheers Peeps
J

IMac Running Windows 7 can't 'detect a properly installed network adapter'

I just put windows 7 on my brand new iMac 27'' i7, but to my surprise I cannot connect to a wireless network, and when I go to the trouble shooting section it says-
"Windows did not detect a properlu installed network adapter. If you have a network adapter, you will need to re-install the driver."
Help me to connect to the internet please.

Install the Apple drivers; read the guide.
You should have Lion so you would have Boot Camp 4.0
Boot Camp 4.0 Installation & Setup Guide OS X Lion
Boot Camp 4.0, OS X Lion: Frequently asked questions

How to find the Installation Type and License Details.

Hi,
If we have an already installed oracle system on AIX ,how come we find whether the installation type is Standard or Enterprise ?,also where we can find the licensing details,ie number of user license?
Regards,
Sam

Hello,
Here is the difference:
<<Enterprise Edition>>
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Feb 27 10:00:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
DBMS_STANDARD.DATABASE_NAME()
ORCL
<< Standard Edition>>
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Feb 27 10:00:44 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - Production
DBMS_STANDARD.DATABASE_NAME()
SRI
-Sri

SetupComplete.cmd detect installation type: install or repair or upgrade

Similar Messages

Maybe you are looking for