SFG alternative BOM in Different BOM

Hi all ,
I have one SFG which is having two alternative bom .
This SFG is used in 2 finished material BOM .
In FG material- 1 i want use SFG alternative -1 and
in FG material -2 i want to use SFG alternative -2 ,
when I RUN mrp system should select the relevant boms.
Is it possible , If yes how to do?
Thanks ,
Regards ,
Ganesh

Dear ,
Are you running MRP at a time for FG1 and FG2 ?
Basically , I am looking for an work around like this :
1.FG1 BOM Alternative : SFG1 as Component -Keep BOM Status -1 Active , SFG1 BOM Alternative 1 : X, Y as component -Keep BOM Status -1 -Active
2.Keep FG2 and SFG2 BOM In -active -2 in CS02
3.Create Routing of FG1 and SFG1 with the same manner .
4.Run MRP-MD02-FG1-Check MD4C-Convert SFG1 planned Order to Production Ordre and also FG1 -Planned Oder to Production Order .
5.Repeate the the Same for FG2 and SFG2 keeping FG1 and SFG2 as inactive BOM status -2 and susequently convert the same .
This is may the work around .
But standard procedure is that , you need to go for Aleter native BOM selection in two fold (FG and SFG for both ) based on the Following set up
1.MRP4 -BOM Selction Method -Keep 2/3 SELECTION by PV
2.Maintain two different PV1/PV2 with a lot size and validity in FG and SFG
Now , when MRP will run in FG and explode the BOM at FG, SFG level , it will chek the MRP4 view indicator frist , if it 2 then it will go to PV 1 and PV2 check the Lot size and Validity and select the alternaitve BOM in two fold
Lastly , Implement the BAdI MD_MODIFY_PRODVERS.
Use the method MODIFY_PRODUCTION_VERSION to write your logic (for checking the stocks) and change the production version to
Hope it clarifies your doubt
Regards
JH

Similar Messages

Different BOM for each month

Hi,
The BOM is different for each month. If i make different alternatives for each month and run the LTP will it help to get the raw material requirement as per the BOM for that month. Example BOM for NOV/DEC will be not same but we want to estimate the raw material req for next year.
Kindly advise what i need to do?
Regards
ShankarR

Dear Shankar,
1.What is the business contraint in using change number functionality to address this requirement without creating any
additional alternative BOM?
2.Say you create the first alternative BOM using a change number and save all the BOM components.
3.The default valid from date will be the valid from date of the change number and valid to date will be 31.12.9999.
4.Whenever there is a BOM change use a different change number with valid from date say 25.10.2010,so using this in the
same BOM delete the components and add the new component's or make any BOM change and save.
5.For the deleted components the valid from date will be say (you have created using today's date for BOM creation)
05.10.2010 and the valid to date will be 25.10.2010.
6.What is the advantage of creating new alternative BOM?
6.How are you using the LTP results for inventory purpose,say how are you planning the raw material's requirement for the
next year based on this year's BOM?
7.LTP is not only the feasibility of material procurement,but also production that can be produced with available resource.
Check and revert
Regards
S Mangalraj

Check material availability and goods issue with different BOM no

dear expert:
please find the below scenerio
1. finished goods contain finished garments which contain washed garments accordingly>sewing garments>print panel>cut panel>fabric
2. before going production we need to check all the component materials as well as their components are available or not.
3. so our idea is we will create one BOM no 7 which will contain all components under finished goods. and we need to check material availablity with this BOM no
4. successively we will split the BOM into different group and assign them under different components as applicable in BOM no 1 which we wants to use while issue.
please suggest whether it is possible and if yes then how can i do this.
best regards
javed iqbal

Dear,
Requirement: System issue Warning / Error message in case of movement quantity is more than available quantity - safety stock quantity while making goods movements.
This is actual requirement - Ex. Material un-res stock = 10 pcs and material master safety stock set as 5 pcs. So, if any reservation, goods issue, transfer postings done with quantity 7 pcs - system issue message as ' on date xxxxx only 5 pcs available' (i.e 10 available - 5 safety = remaining 5 relevant for movement).
For this Dynamic availability check created with checking rule and assing rule with trasaction OVZ9 and OMB1 similar for Reservations.
Make the message to be shown either Warning or Error and transaction types also assign the rule.
BUT do suggest to do regression test cross functionality wise whether any where this message breaking background operations like - auto reservation from production , sales order etc.
Regards,
Syed Hussain.

How to maintain alternative material in a BOM for a component.

how to maintain alternative material in a BOM for a component.if stock for existing bom component is less then it should consider other alternative material in the same BOM

HI,
You can maintain alternate material for BOM Component by specifying Alternate Item group as below;
Go to CS03/CS02--> Items-> Select Component and go to details->Basic Data Tab--> General Data
Pls. find more details about Alternate Item group maintainance as below:
Alternative item: group
Consolidation of alternative items within a BOM. Every material in the assembly can be included in the alternative item group.
Use
As soon as you enter an alternative item group, you see an additional dialog box with the following data: ranking order, strategy, usage probability.
You can maintain alternative items in the following situations:
Alternative positions with specific usage probability
These alternative items are incorporated with a specific usage probability. Enter the usage probability for each alternative item in the group, so that:
dependent requirements are determined in requirements planning
dependent requirements are changed to a reservation in the production order
Alternative positions as information
You can enter an alternative item for information purposes. This item would then, for example, only be taken into account in situations involving missing parts.
As there should be neither dependent requirements nor a reservation for this item, enter no usage probability.
Procedure
Enter the same character string to denote the alternative items of an alternative item group.
Enter the same strategy for all alternative items in the alternative item group.
Dependencies
Alternative items are valuated in the following way:
Dependent requirements determination
Requirements planning determines the dependent requirements according to the usage probabilities that have been entered.
If the usage probability is 0%, then no procurement is planned for the item. For information purposes, however, dependent requirements with 0 as quantity are created.
Withdrawal posting
You can control the withdrawal posting for the resevation in the production order in the following way:
Withdrawal according to usage probability (manual change is possible)
Withdrawal if there is 100% availability
(Check ranking order and strategy)
Example: See Strategy for alternative position
Further you can also maintain alternate material if you want to stop using this material at certain time as below:
In material master of the material ,
Go to MRP-4 View----> Under Discongtinued parts specify
Discontinuation Indicator
Eff-out.
Follow-up matl
So system will automatically consider follow up material in BOM as per the settings you have maintained for the material to be replaced.
Hope this helps.
Regards,
Tejas

Function Module for creating Functional Location BOM and Equipment BOM

Hi All,
Is there any function module for creating and changing Functional Location BOM and Equipment BOM ???

Hi,
Tables for Eq., BOM: EQST, STKO, STPO.
Tables fro Fun., Loc., BOM: TPST, STKO, STPO.
You can use FMs: CS_BOM_EXPL_TPL_V1, CS_BOM_EXPL_EQU_V2 & CS_BOM_EXPL_MAT_V2 for extracting the appropriate BOM related data.
And for the Alternatives please check the customizing or check with your respective Module experts for the appropriate configuration.
Hope this helps.
Best Regards, Murugesh AS

How to link BOM Alt with BOM qty

Hi,
How to link BOM Alt with BOM qty in a report??
e.g.
BOMA, Alt 1
MatX Qty = 10
BOMA, Alt 2
MatX Qty = 15
How to reach a perticular case, as STPO do not have a field for BOM Alt (i.e. for STLAL)
Rgds,
MS.

Hi,
STPO does not have BOM alt field.
So when we see the out put of STPO, all the BOMs with all alternatives are displayed under single BOM number.
How to identify a perticular BOM alternative to reach a perticular component. (Same component is used in all BOMs)
Rgds,

Sales bom and assembly bom

i want to make sales bom which consists of all the materials to make a product(machine).this sales bom is available to sales person and he has to select the varients depends upon customer requirement(varient configuration).
then all materials are to be manufactured and are to be available in stock.
after this step assembly person has to assemble the components according to the assembly procedure for that he has to refer assembly bom which consists of logical grouping of components for his easiness in assembly.
so sales bom has to be with materials only(components which are to be produced to make final product) and assembly bom is with logical grouping of these materials according to assembly procedures and total materials are same in sales bom and assembly bom
is there any method in sap to link sales bom and assembly bom which are different for sales and assembly?this is make to order scenario
thanking you
srinivas

Hi Srina,
The difference between them is
In the assembly bill of materials, the finished product appears in the sales order document.
But in Sales bill of materials, the finished product and the components appear as separate items in the sales order document.
For example the finished product can be a set of office furniture.
you can use the assembly bill of materials to define the composition of the set. The finished product is not stored as an entire set in the warehouse. However, the individual components of the set (for example, chairs, tables, and Almirah) are items in stock. If a customer buys a set of Office furniture, draw the components from stock and deliver them to the customer as a set.
Hope this help,
Regards,
MT

Costing for sales order BOM vs Production BOM

Hi gurus,
can some one please explain in clear how is costing different if we use sales order bom versus if we use production bom.
Thx

I Feel Your are asking about Sale order costing and Std cost estimate using production BOM
IN sale order costing- You can use any BOM ( sale BOM or production BOM), IF you carried out costing in sale order level in Va01/Va02, system will read the BOM, routing for that material & system will take the costing lot as sale order qty and carried out cost estimate, This cost estimate value will update In condition as EK02. & system will take this Ek02 price for production GR value, PGI value and the profit is calculated based on Ek02 not based on VPRS( std cost estimate)
Production costing:
System will take the costing lot size in material master costing view, System will read the BOM and routing for the material in Ck11n, And you need to mark and release in Ck24, this value will update as Std cost price in material master, this value is atken for Goods movement for that material

EHP5_Engg BOM and Prod bom sync

Hello Team,
We have upgraded our ECC 6.0 with EHP5.
As per the information and work i had done SAP provides the
"Guided Structure Synchronization for transition from engineering to manufacturing (or other type) BOMs".
whats does this mean and how it works. I am not sure whether this is the option which allows bom changes to automatic flow or flow with few clicks from engg bom to prod bom.
Any info please share the same, because i am looking for this option desperately.
regards,
satish

Hello Alok,
Thanks a lot, it was a very great answer. I have one small doubt in this.
1) When we change anything in Engg BOM and Production BOM using ECM process (either in same ECM or 2 different ECMS) with date or serial number effectivity. the changes will automatically reflect on that particular date or serial number?
OR
2) When we do any change only in Engg BOM using ECM process with date or serial number effectivity, the changes will automatically (or by any setting) flow to production BOM on that particular date or serial number.?
Which of the above 2 you mean?
regards,
satish

Creation of Variant BOM using Simple BOM

Hi
I am havign a production BOM, i wanted to create Variant BOM using Production BOM.
Pls let me know, whether we have any Function modules for the same.
Regards
MD

check SAP std.program to create variant BOM .
<b>RCSBI030</b>
Regards
Prabhu

Production BOM and Engineering BOM

Dear Gurus ,
I want to know difference between Eng BOM and Prod BOM . We have standard multilevel engineering BOM but if I use that BOM for routing assignment I can only see 1 st level components . Can I put all components in single level so that I can assign them in FG routing and pick list will have all the components ?
We are thinking of considering all assy as phantom so that there would be only one prod order for FG .
Neal

Hi,
The engineering BOM is as designed material BOM. It may include all the part upto the level of nuts & Bolts & also the engineering drawings. But in Production BOM you may not include the engg drawings & the C class material like nut & bolt, which may be planned on Reorder point planning.
I hope the answer is clear.
Regards,
Prashant

How to Make a BOM as Configurable BOM ?

Hi,
Please answer my question , How to Make a BOM as
Configurable BOM ?
Regards,
Abhilash

Dear Abhilash,
Please refer to the following link:
http://sap-img.com/sap-sd/sales-bom-implementation.htm
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Do let me know in case of any queries.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Engineering BOM and production BOM-very critical help

Hello All,
I am working for a client and below is the requirement, please guide me.
1) Customer has 2 department here one is engg and other is production as usual.
2) He needs BOMs only for 2 purposes a) For R and D b) Production.
3) He needs any changes in engineering and production to be reflected from certain specified date.
4) He says he will raise ECN for every change.
Now my questions are:
1) How to copy any changes done at later stages from engineering bom to production bom at specified date. Can ECN automatically do this?
2) what are methods to copy any fresh E bom to Production bom also?
3) Can ECN once approved automatically update changes in BOM by itself or does customer cumpolsarily need to take ECN and manually change E bom and then P bom.
Please suggest if any better model can help.
Regards,
satish

Hello Adler,
That was good response. Here any of both situations can appear. So can you help me in knowing the procedure how to do the same in both cases
Also below are my pending queries, any one please help
1) He needs any changes in engineering and production to be reflected from certain specified date as per date he mentions
4) He says he will raise ECN for every change.
Now my questions are:
1) How to copy any changes done at later stages from engineering bom to production bom at specified date. Can ECN automatically do this?
2) what are methods to copy any fresh E bom to Production bom also?
3) Can ECN once approved automatically update changes in BOM by itself or does customer cumpolsarily need to take ECN and manually change E bom and then P bom.

How to convert WBS bom to material BOM in PP-ps scenario

Hi experts
i am working on PP -PS scenario anyone can suggest how to convert wbs bom to material BOM as well as what are the further steps related to project mrp as well as project planning
your valuable reply is really appreciated
with regards
shaik

Hi,
In additional to the above u can choose the BOM usage as 3- Universal.
And then transfer WBS BOM using CN33.
Regards
JB

How to enter BOM data in BOM header

I need a small help from SAP GURUS regarding the subject given above. When i was trying to enter BOM data in DIR enabled object links of BOM header, it was not allowing (Disabled) to enter the same.
How to enter BOM details in BOM header in DIR?
Is their any proceedure to enter the BOM data in DIR object?
Thanks in advance.
Regards
Suresh. J

Hi Suresh,
unfortunatly it is not possible to add a BOM header link from document side.
Generally the linkage of objects to a DIR is designed as such that a
user can create and maintain the link from object-side as well as from
document-side. There are, however, some exceptions like the production
order (PORDER), BOM item (STPO_DOC) and BOM header (STKO_DOC). Links to
these objects can only be created and maintained from object-side.
Regarding BOM objects the reason for this restriction is due to the
engineering change master, which is completely connected to BOM. The
functionality at this level only allows the display of BOM objects from
the DMS application.
The check for these objects is done in the following coding:
Main Program     SAPLCV130
Source code of   LCV130O01
MODULE (PBO)     L201_BLANKLINES
***special settings
IF drad-dokob = 'PORDER' or drad-dokob = 'STPO_DOC' or
     drad-dokob = 'STKO_DOC' or drad-dokob = 'DPR_OBJLNK'.
    PERFORM display_col_change USING 'PORDER-CO_POSNR' 1 1.   " no icon
    GF_no_edit_screen_link = 'X'.
ENDIF.
if not gf_no_edit_screen_link is initial
and display_mode NE c_dms_display.
    message w321 with intdrad-dokob.
endif.
ENDMODULE.                             " L201_BLANKLINES OUTPUT
I hope this information is usefull for you. In that case please reward points.
Best regards,
Christoph

SFG alternative BOM in Different BOM

Similar Messages

Maybe you are looking for