SGEN after EHP4 Installation on New system

We have completed the ehp4 installation on a ehp4 ready system. After the installation we need to run SGEN as per the guide, however which option we should choose in SGEN
generate all objects  or generation after an system upgrade ? we had run the generation after an system upgrade and it completed very soon.
Please advice , should we run generate all objects for selected components ? Also we have not used SGEN after the ehp4 ready installation.
Regards

Hi,
  As of now you installed ERP 6.0 only you need to upgrade again to EHP4. SGEN you can run with first option.
Please disable  archivelog...otherwise your disk will full.
Thanks and Regards,
Jibin..

Similar Messages

  • DB2 Post installation after EHP4 Installation

    Hi,
    I have completed ehp4 installation in db2 9.1 fp7 database windows 2008 server.What are the post installation activities i should do?
    I have read in the doc where they have given so many post installations.ie post activities before resuming production etc etc..
    But i felt like deleting the old table spaces is important for which they have given the syntax(db2 clp command) also.but if i run that "0 rows selected".pls tell me what is the correct syntax for deleeting old table spaces.
    and also pls let me know what other i need to do after ehp4 installation from your experience.
    Thanks

    Hi Sunny,
    Thanks for your reply.
    Bur the link you have given,is the common for db2 to delete the table spaces.But I need for the post installation for ehp4 in db2.
    for deleting the table spaces,I need to know which are the old table spaces after upgrade for which there is a syntax given in the master guide.below are given in the master guide.
    Deleting Substitution Tablespaces
    After the enhancement package installation, some tablespaces are no longer used and you can delete them.
    To determine the names of these empty substitution tablespaces of the source release enter the following db2 clp command:
    db2 "select tbspace from syscat.tablespaces TS where TS.tbspace like '%E%<rel>%' and not exists ( select 1 from syscat.tables where tbspace = TS.tbspace or index_tbspace = TS.tbspace or long_tbspace = TS.tbspace )"
    To delete all obsolete tablespaces that are returned by the above mentioned db2 clp command, enter the following db2 clp command at the operating system level for each tablespace listed:
    but if i execute no rows selected.
    so pls guide me how to do.

  • Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

    Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

    The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

  • Certain functions in few transactions were removed after EHP4 installation

    Hi Folks,
    We have installed EHP4/SPS7 in our ECC 6.0 system and we are currently in the regression testing phase. While some scipts were run, we found that some of the functional tabs were removed possibly due to the upgrade such as some tabs in ME53n > Number of Prinicipal Purchase Agreement. When we compared this with a system that has not been upgraded yet, the tabs are still visible therefore tests fail due to the changes. Is there some document that will state the changes?
    Regards,
    Jennah

    2 "tricks" you can use are:
    1) Objects which are critical for your implementation (some BC objects are good candidates...) can be removed from SU24. Document them and the procedure, and then clean them out against in one swoop when SAP introduces them for your choice of transactions. This makes "2c" easier and PFCG as well each time.
    2) Another trick is to create "original data" for the system. This is an exception where the SAP tables (SU22) are maintained with user ID's other than 'SAP' (or some SAP developer's names who did the same without anonymizing the trace records in earlier times...). If you clean those first before performing step 1 then you can use this approach as well.
    It really does make your life easier, but I do not recommend it if you are not very familiar with SU24, SU25 and the "original data" trace mechanism and the various prerequisites to make it work consistently. You should also update and correct the originators of the step 2D data and the SE97 data.
    From my experiences, these changes can often be combined with reimplementing a lot of roles or the whole concept to make it maintainable going forward. You will generally find all sorts of opponents to any change... if you start fresh and support them with such cleanups, then they are all very thankfull. Just being honest.
    Cheers,
    Julius
    Edited by: Julius Bussche on Nov 17, 2009 10:11 PM

  • PO Custom Data tab size incorrect after EHP4 installation

    Hello,
    We have previously enlarged the size of the custom data tab on PO transaction ME23N (via modification) in order to accommodate a comprehensive overview of the many custom fields we have. The screen we changed is as follows:
    Program: SAPLMEGUI
    Screen: 1227
    Original size:
    - Lines/columns Occupied 5 / 100
    Mainten. 5 / 100
    Modified size:
    - Lines/columns Occupied 23 / 160
    Mainten. 23 / 160
    It worked out fine in our ECC6.0 Release 700 (SP17).
    Recently we upgraded to Release 701 (SP03). We have made the same modification to the same screen as mentioned above. However, the screen was not resized as we had expected. Its size stays as 5/100. So the user has to scroll through a very short subscreen in order to see all custom fields.
    Have anyone of you experienced this ( or any UI related issues)  after installing enhancement pack 4 of ECC 6?
    Any of your suggestions are appreciated.

    Sap has provide a sample in OSS [ Note 407975 - MM06E005: Collective note: Examples for implementation|https://service.sap.com/sap/support/notes/407975] - compare with yours
    Regards,
    Raymond

  • Nightmare Customer Service Verizon - DAD cannot connect phone line after fiber installation

    Similar to other complaints I have seen online yet Verizon customer service reps deny they have ever heard of the problem.  After FIOS installation my ADT system stopped communicating.
    We had Verizon FIOS triple play installed last August (2012) after a summer long marketing campaign by Verizon.  Several trips to get it.   A dropped phone number transfer order and Verizon tried to issue me a new phone number ... that took several attempts to fix. 
    Sept 2012 Our ADT service calls us to inform us our monitored alarm system stopped communicating  since Aug ... I call ADT  -they say it was Verizons fault, but could come out and fix it for a fee.  It took months to getr back to Verizon
    I first spent almost an hour online last night with a Verizon rep who claimed it was not Verizon's fault - Claiming that all the tech had to do was deliver a phone signal to one jack.  I called Verizon customer service and wasted time with that rep also.  I asked hat a supervisor call and the rep could not confirm that a supervisor would even get back to me. 
    TERRIBLE CUSTOMER SERVICE - Time to cancel Verizon

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".
    There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.

  • SGEN after activating business fuctions in ERP 6.0 EHP4

    Hello,
    We upgraded erp 6.0 to EHP4 and ran SGEN after the upgrade was done.  Then we activated 33 business fuctions but were not sure if we should run SGEN, due to time constraints.  I tried looking through the upgrade guide but it doesn't mention anywhere if we should run SGEN after activating certain amount of BF's.  What is everyone's opinion?  Should we be running SGEN after activating BF's?

    Hello,
    Since you already completed the SGEN after the upgrade you will not require it again now. There is no need at all.
    if any new object is changed and activated then you need to run SGEN, so that system can compile the things one time using dummy load.
    Best Regards
    Niraj

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • Installation ERP 6.0 EHP4 on a distributed system

    Hello,
    We are in process of the ERP 6.0 EHP4 installation (abap only) on a distributed system. The database is already installed (MaxDB). After that we installed the ERP6 EHP4 from the DVD ERP 6.0 EHP4 READY. After the installation was successfully done, we found out that the EHP4 was not installed, just the ERP 6.0 (600). So why the sapinst did not ask us where he can find the EHP4 packages?
    If we tried the installation with sapinst as a central system (host and db on same server) it asks about the installation export of the EHP4. So thats a little bit strange..
    Any ideas?

    Hi,
    When you install ERP 6.0 EHP4 system then first EHP4 Ready system will be installed in which all netweaver base components like SAP_Basis, SAP_ABA etc. will be on 7.01 release and all ERP components will be on 600 release. And this system is called as EHP4 Ready system. After that you have to upgrade your EHP4 Ready System to EHP4 level.
    This restriction applies because when you will upgrade EHP4 Ready system then you can upgrade only those Technical Usage which you want to use on the system instead of upgrading all components. So, When you will upgrade your EHP4 Ready system , then you have to download packages & stack xml file from MOPZ in solution manager. In MOPZ you have to select Central Components which is mandatory and it contains SAP_APPL and EA-APPL package, once it will be upgraded to 604 level then your system will be EHP4 system. If apart from Central Application technical usage, you want to install any other Technical usage then you can select them in MOPZ and can upgrade in one go.
    For more information, check Technical FAQ and How to install eHP4 document on http://service.sap.com/erp-ehp.
    Thanks
    Sunny

  • BASIC PREPARATION FOR INSTALLATION OF A NEW SYSTEM

    Here is some advice on the steps to take for a successful installation of Snow Leopard (or any major system update or upgrade):
    1. Do not start until you have made two bootable back-ups, so that you can easily return to the situation you had before the installation, if something goes wrong. A bootable back-up is a back-up of everything on your drive to an external drive and made "bootable" (that is, you can boot off this external drive to restore your main drive to its pre-existing condition). There are a number of pieces of software which make bootable back-ups. For little money, you can use Carbon Copy Cloner or SuperDuper. I use Synchronize Pro X, which costs a bit but is industrial strength software. Over the years, I've found that SPX does the job much faster than CCC or SD, and, most importantly, Qdea (the SPX people) puts out a new version of SPX to deal with the new system or update much more quickly than do any of the other back-up software people. Sometimes you won't get the new version of CCC or SD until quite a while after the release of the new system software, and you're not able to make a bootable back-up in time, if you want to install the new system software quickly. HAVING A BOOTABLE BACK-UP IS ABSOLUTELY NECESSARY TO ENSURE THAT YOU DON'T LOSE ANY DATA AND THAT YOU CAN RECOVER QUICKLY IF THERE'S A PROBLEM WITH AN INSTALLATION. Test the bootable back-up by booting off it before you try the installation of the new software.
    2. Verify and Repair your main drive and Repair Permissions before doing any major installation. You want your drive data to be in excellent shape before putting in a new system or update. When the installation is done, repair the permissions again.
    3. Check carefully for any information about the compatibility of the new system software with your primary applications and peripherals (in particular, printers). Even with a good new installation, you may lose a printer if it's old and there's no new driver for it. Don't be surprised after the installation that you've lost the use of your printer or other important peripheral device.
    4. If you run into problems, check the Apple discussion forums to see if someone else had the same problems and find out what they did to solve them.
    Message was edited by: jsamu50901

    You may be able to make a bootable back-up with DU, but DU can't do a quick update of the back-up as time progresses. The beauty of a piece of software like Synchronize Pro X is that, once you have a bootable back-up, you can quickly update it week by week. SPX can very quickly find the changes in your master drive and put those changes on the bootable back-up. With DU you have to start from scratch each time to make a whole new disk image.
    A bootable back-up isn't just for use to protect against an installation problem. I've had a computer stolen in a hotel room, and I was able to use a friend's computer (which was also a Mac) to keep working. I just hooked up my back-up, booted off it and now his computer appeared to be my computer, because my bootable back-up recreated my usual work environment on his computer.
    Similarly, if your main drive fails, you've lost nothing if you have a bootable back-up. You're up and running again very quickly.
    I keep my bootable back-ups up-to-date always. And with Synchronize Pro X, this is very quickly and easily done.

  • What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

    What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

    I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.

  • After installation third Operation System my Imac(27) heating quikly and better.

    Good Afternoon. After installation third Operation System my Imac(27) heating quikly and better.
    I had MacOs and Win7 32bit(installed in Shop). It was ok.
    But 32 bit OS didnt work with 8Gb RAM. Therethore i installed Win7 64 bit.
    Now i Have MacOs, Win7 32bit, Win7 64 bit.
    Before installation WIn7 64bit, in Win7 32bit my Imac was working in common mode(Internet\Video) without propeller noise. But now, i have noise after 10-15 minutes Video or Browser using.
    In Win7 64bit i had more propeller noise and after 10-15 minutes play computer game, i have lags and troubles with performance!! My propeller's are spinning with maximal velocity(after 10-15 minutes). Therethore i cant play games\watch Video in my Win7 64 bit. I think that i must be install someone drivers?? I have BootCamp 4.0 under my Win7 64 bit.
    In Win7 32 bit, i dont have problems with perfomance, but noise is really stronger than was early.
    Please, Help me!
    Sorry for my bad English.
    Text for Russian employee:
    Я купил Imac 27 с установленный МакОс и Win7 32bit. Всё было хорошо, но под 32 бита не работает 8гб Озу.
    Поэтому я установил 64битку, но под ней сильно начинают крутится кулеры и вентиляторы. Примерно через 15 минут они крутятся на максимальной скорости!! Попробовал поиграть в игры, через 15-20 минут производительность начинает падать и начинаются "подвисания". Т.е. поиграть не реально. Да и при обычном сёрфинге страниц нагрев происходит быстро и кулеры начинают крутится быстрее.
    Под 32 бита производительность не падает(мной замечено не было), но нагрев происходит быстрее и кулеры начинают крутится тоже быстрее. Даже при обычном сёрфинге уже начинается шум.
    Не знаю по поводу нагрева, может он и в пределах нормы, но шума до установки новой винды было меньше!
    Помогите разобраться с проблемой. Я не хочу потерю производительности под Win7 64бита и хочу уменьшить шум/нагрев под обеими Окнами.

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Possible to migrate installation w/ SLD to new system using 'tar'/'untar'?

    I have a CRM installation with TREX, that I need to move from one unix system to another (same patch level). As SLD is setup, can I 'tar' the entire installation on the old system, 'untar' the bundle on the new system, and bring the SAP setup back into function mode? It should be doable if SLD is not setup. But since there is SLD bundled in the setup, I am not sure if 'tar' is the way to port the installation. I can give the new system the same hostname, but ip address would be different. Any pointer is highly appreciated! Many Thanks!

    Hi,
    You can perform asystem copy, even SLD can be set up later accroding to your need.
    Regards,
    Vamshi.

  • My Mac book is restarting frequently after installing few updates.It has started to bother me that why the system asked me to restart 4 times after the installation was done . PLease HELP

    Hi please help ,
    Certain updates were been installed  and then a restart was done to install the updates successfully in my MAc Book PRO .After restarting the sytem,  the system displayed a message for a restart  and it happened three times.Every time i Login in back , the message displayed on the  screen says " Your computer was restarted beacuse of a problem". I'm new to Mac and therefore could not understand the problem. It would be much appreciated if some one can answer or explain this activity to me .

    Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first  year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
    Good luck.

  • Post installation for Portal and errors for new system

    I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
    1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
    2)  When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
    After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
    An exception occurred while processing a request for :
    iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
    Component Name : com.sap.portal.layouts.framework.WAandNavPanel
    Error occurs during the rendering of jsp component.
    Exception id: 05:05_25/03/10_0032_7012350
    See the details for the exception ID in the log file
    The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
    Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
    J2EE Process Details
      Name Type PID Status Debug
      Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
      SDM SDM Server 4,736 Running Switched off
      Server0 ID7012350 J2EE Server 596 Running Disabled
    Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
    Thanks,

    Hi Jay,
    Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
    - Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
    - Check JAVA_HOME Enviromental variable is added or not under "System Variable'
    Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
    Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services  manually and change prperties as automatic)
    Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
    Hope it helps
    Regards
    Arun

Maybe you are looking for