Shared (central) player and skin issues

All,
Thanks for helping out a n00b with regards to Flash video.
I'm trying to keep one player and skin in a central location
on our site and use them with all videos we publish. However, when
I move them, videos break. The path to the player is being modified
to point to the proper location, but things still break.
Any idea how I can get this to work?
Many thanks folks!

Dis, Hi.
If you want to use non-consumable IN APP PURCHASE - you don't need use any saving for restoring on other devices.
Non-consumable it's products, that you can buy once. For unlock for example from LITE to FULL version. Than you can save it as Local Shared Object.
When you will buy it again - APP STORE will not get money again but will return product as Buyed (as new) and you will see it as 'restored'.
App Store don't provide any downloads. It's return only JSON parameters like 'restored', 'purchased' and etc. All rest you do on your device

Similar Messages

Outlook 2013 shared mailbox indexing and search issue

I have 2 Outlook 2013 clients running in Cached Mode, with Download Shared Folders checked and a delegated mailbox opened via the Account Settings Advanced tab. Both clients are accessing the same delegated mailbox. According to this article (http://blogs.technet.com/b/outlooking/archive/2014/04/28/understanding-search-scopes-in-microsoft-outlook.aspx),
they should be able to search the Current Folder via WDS, but in both cases, changing the Search Scope to Current Folder causes Outlook to hang for 10-20 minutes.
This makes searching the delegate mailbox completely unworkable, which is a problem for the 2 P.A.s concerned, as they spend a lot of the day searching for correspondence.
I have tried rebuilding the search index, with no change in the search behavior. It seems that WDS is not indexing the cached delegate mailbox - how can I correct this?
Thanks
Patrick

Hello,
Please try to add the following registry key and then restart Outlook to check the issue again:
Note: Serious problems might occur if you modify the registry incorrectly. For added protection,
back up the registrybefore you modify it.
Registry data to index shared mailboxes:
Key: HKLM\software\policies\Microsoft\windows\windows search
DWORD: EnableIndexingDelegateMailboxes
Value: 1
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support

A3000 flash player and camera issue...

I managed to get Adobe Flash Player installed onto my A3000, hoping to use it for Flash based chat rooms.
It now loads and operates Flash chat based rooms, however, when I try to use the video chat Flash says I have no camera.
ANyone know what I need to do and how to make it work?

If you want to report Flash Player bug, right location is here. If you report ActionScrit bug, JIRA is right place though.
By the way I belive this is not bug but expected behavior. I'll follow up more info in Flash Player forum: http://forums.adobe.com/thread/920682?tstart=0
thanks,
Hitomi

Mail Flow Central - Slowness and database issues

Hello,
My MFC database is about 220 gig, keeping 45 days of data. It is running on a large system (Quad XEON Processor HP ML 570, with 6 Spindals for the data drive) and it still gets so busy it shuts down MySql.
Support keeps telling me to index the tables, but they are indexed, and I keep getting errors.
Is anyone else having issues?
Anybody with a database this size or larger?
Thanks,
Mike

From our experience the performance issues with MFC are around the purge process.
Our ugly work around was to set the purge date to 3 months our and to start over with a clean database every 2 months or so. Effective the purge never happens, we wipe and recreate. Like I said it is an ugly kludge. Eight weeks of data ends up being about a 512GB size database in our environment.
Long-term I think MFC has to go to a rolling partitioned table solution, based on date. So then the purge process can be done more efficiently at the partition level.
http://dev.mysql.com/doc/refman/5.1/en/partitioning-types.html
- Erich

Adobe Flash Player and trackpad scrolling issue?

I downloaded Flash Player to my mbp yesterday so I could watch some YouTube vids but after the d/l and install my trackpad scrolling became slightly jittery and skipped every so often. It does it on anyhing that is internet related only (safari, app store, itunes store etc.) It got annoying so I uninstalled Flash Player and no more skipping. Does anyone know a fix to the scroll skipping when Flash Player is installed? Maybe a setting that can be changed in flash system prefs? I would like to have it installed but if it is going to continue to make my scrolling skip then I guess I'll have to try to live with the skipping or just flat out live without flash on my mbp. I downloaded it directly from www.adobe.com and it was the latest version. I'm running ML on a mid 2012. Also could be an issue with ML being so new that adobe hasn't caught up yet?

I have similar problems. It does seem to correlate to Flash running in Safari. Works fine with Google Chrome but Chrome isn't as fast on OSX.

Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

Anyone able to help please?
Thanks.

Any issues with file sharing between Windows and latest Mac client?

We're running Lync 2013. My Windows client is 15.0.4551.1005. Mac client is version 14.0.8.
I open a conversation with a coworker on his Mac. I then try to share a png file. He clicks accept but then my client says the attempt timed out, and his client says that I canceled the file transfer. The coworker then boots the Mac into Windows and we try
again, and the file share works fine. When I jump on my Mac, I can send files to his Mac without issue. When he tries to send from his Mac to my PC it fails, but when he tries to send from Windows on his Mac to my PC, it works.
I can't find anything specific in the logs that would indicate a firewall issue. Is there a bug with file sharing between the Mac and PC clients?
Thanks,
Matt

No, There isn't a bug with file sharing between Mac and Pc client.
2941640 Desktop sharing session stops in Lync 2013 when all screen data is updated
Also you can check below links
http://support.microsoft.com/kb/2952672/en-us
http://support.microsoft.com/kb/2880474/en-gb
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Unable to install Adobe Flash Player and Download Manager issue

Dear all,
1. I tried to install adobe flash player and have enabled
'download unsigned ativex control' and "run activex control and
plugins", but never succeeded.
2. I am unable to locate the "download manager" sources.
Please help.
Regards,
Harsen

As a note, running with no anti-virus software is a very bad choice. I would try installing Microsoft security Essentials, [http://microsoft.com/security_essentials http://microsoft.com/security_essentials] to stay safe with a free but light weight anti-virus.
If you want to install a new version of Flash, try installing [http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe].
However, the sites might

MacBook Pro Health and safety issue: Potential Burn during normal use

Hi,
I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
MacBook Pro 17"
Machine Model: MacBookPro1,2
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2.16 GHz
L2 Cache (shared): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B00
Serial Number: ()
SMC Version: 1.5f10
Sudden Motion Sensor:
State: Enabled
I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
A slightly crisp, but loyal, MacBook Pro user.
Mike Doherty
MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal use

Mike... I do sympathize with your situation but let me correct you:
I recently experienced a 3rd degree burn using my
MacBook Pro
Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
I had my laptop on my lap. I was wearing shorts. It
noticed that it was warm on my leg where the left
side of the MacBook Pro was touching my leg, but it
didn't create a reflex pain response.
Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
Upon completing my session, when I closed the machine
and put it away, I noticed a 1 inch x .75 inch
blister on my leg where it had been touching the
MacBook/Pro; and it has turn out to be a significant
burn.
You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
I checked all the documentaiton that came with my
MacBook Pro and there was no warning about the
potential of this situation.
Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
To confirm this, apple has also information online:
http://docs.info.apple.com/article.html?artnum=30612
I recommend that Apple let owners know, perhaps
through an email or a popup when they visit the Apple
site.
They do... link above.
Lastly, when I encountered this issue, I wasn't
running any high performance, compute bound
applications. It was email. So, I have to believe
that it is possible to detect wait states within the
processes running and take the processors to a low
power mode of operation when they are not performing
actual work. Am I out in left field here?
No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
I want Apple to be successful. I haven't heard of a
similar complaint on any of the high performance PC's
at work. Beyond a Health and Safety issue, this is
also a reputation issue. Better to face into the
storm and honestly deal with this issue.
It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
A slightly crisp, but loyal, MacBook Pro user.
Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care

Safari, Windows Media Player, and Proxy Servers

I'm trying to watch streaming video of comedy central's Daily Show but its not working. I hit play and I get "-19422" in the play bar. I can't find anything about this anywhere online. I used to be able to do play these videos on my old computer but have had no success. It has to be in Windows Media Player format. I have Windows Media Player and have streamed from other sites. The only thing I have found is that the comedy central page requires a proxy to view streamng video. I have contacted my ISP and they say no such proxy is needed and I should be able to view the page. Am I suppose to guess on the proxy server? The comedy central site says it supports safari and apple computers but it doesn't seem like it. Does anyone else have this problem? Does anyone have any ieas for solving this problem?
PS- This is what comedy central says.... Also my ISP is Time Warner Cable's RoadRunner
"If you are on a Mac, make sure your Player is set to only use the proxy, and disable TCP or UDP checking as this will cause timeouts.
If you choose the Use proxy option and do not know the proxy server name or port number you should use, contact your Internet service provider or network administrator. "
12" PB 1.5Ghz Mac OS X (10.4.3) 768 RAM

Hi,
The videos work fine for me with Safari 2.0.2 and OS X 10.4.3. The section of the help file you quoted appears to be referring to a corporate firewall setup rather than a typical home setup - you shouldn't need to change any of the defaults for Windows Media Player.
A Google search for that error code you received mentions Flip4Mac in a couple of places - do you have that installed?
If so, try disabling it to see if that is the cause of your issues.

The much debated FW400 and FW800 issue, my final verdict.

Ok, so there has been many conflicting theoretical opinions on how FW400 and FW800 work together on the Macbook Pro's. So I went ahead and conducted some tests with my Triple Interface WD Mybook Pro 500GB and M-Audio Firewire Solo using XBench 1.3
You can see the figures at http://memo.tv/mbp_fwtests.htm. (If I had used a FW800 Stripe set such as the Mybook Pro 1GB the difference in performance would probably be much bigger as the current bottle neck in some of these tests is probably the disk and not the interface).
My results indicate that:
Running the disk on its own in FW800 with no FW audio interface provides by far the best HDD performance
As soon as you connect a FW400 device, the FW800 performance drops to FW400 levels. It does not matter whether the FW400 is daisy chained off the FW800, or connected to a seperate FW400 - the disk always drops to FW400 - and for a £2K 'professional' machine that s*cks big fat donkey b*lls
Even having the disk on its own on FW400, seems better than connecting it on FW800 and having another FW400 device connected (that makes sense I guess).
I had no audio dropouts in any config while the tests were running.
Running iTunes and streaming audio (from radio) while the tests were running had no/minimal impact on test results
USB2 performance for disks are a helluva lot slower than FW400 and should be avoided if any kind of disk performance is needed.
I guess this clears up the myth that if you daisy chain a FW400 device off a FW800, the FW800 works at full bandwidth.
Now of course these are the results that I got. I don't know if I have a healthy mac or not! So I am very eager to find out how other people's mac respond to similar tests... so if you are in doubt, please go and download xbench, try a few different configs, run the Disk Test every time, and lets see the results!
cheers,
MacBook Pro C2D 17" Mac OS X (10.4.9) Week 46 Build

to be fair, not even the desktop macs come with more than one firewire buss built in. many ports, yes. but one buss. so, when you realise that your requirements will outstrip the bandwidth you can get from that one buss, you have to consider your other options. luckily for you, you have a macbook pro, which has a PCexpress card slot. this means you can actually add another _totally independent_ firewire 800 buss, via a card. you'd have to do the same thing on a mac pro tower if you needed it, just with a different kind of card.
I doubt that there are many if any laptops available that come with more than one firewire buss built-in, regardless of how many ports they put on them. so your £2K machine isn't really the ripoff that you are feeling it is.. particularly given that it has this vital expansion capability via the PCexpress slot, which will resolve your firewire issues perfectly via the addition of an inexpensive card.
you can even choose to buy an eSATA card instead of a FW800 one, and use an external drive with an eSATA connector. this will give you even faster disk performance than FW800, and still leave your built-in firewire buss free for your audio interface.
btw, one thing you should know. m-audio are notorious for bad drivers. it's quite common for users of other firewire audio interfaces (like RME for example) to have far less, or even no drop out issues at all in sharing a drive and the interface on the one buss. it's possible that it's just your m-audio device that refuses to make any effort to share the buss bandwidth with your drive. and it's also possible that your western digital drive is not a good player on mac firewire either. I recall reading somewhere about WD drives having some issues or less than optimal performance on macs.
in any case, the suggestion of using an inexpensive card to add another high speed buss to your machine will work regardless of what your devices are and how bad or good their firewire use is, cos they'll then have their own uninterrupted buss.

Windows Media Player plug-in issues - Safari 4.0.5 on Windows 7

Hi guys,
I just did a fresh install of Windows 7 and of course the page to chose a browser popped up. Glad to see my beloved Safari browser to be available I installed it. Of course not all was running smoothly but after the 'mandatory' flash, Windows Media Player and QuickTime plug in I assumed all media content should run perfect in Safari.
Unfortunately not for WMV files. I get the 'Safari can't find the internetplugin, MIME-type application/x-mplayer2'error message.
I looked the issue up on the web of course and found out the trouble that Safari had with WMV streaming. What struck me is that this is a Mac only problem I believe (Flip4Mac solution). As I am running Windows 7 I was quite sure that Safari should be able to stream and play WMV files in the browser.
So I removed and installed the Windows Media Player plug-in again (http://www.apple.com/safari/download/plugins.html) but to no avail. I then removed Safari and installed it again, still same problem. I tried the Fire-Fox plug in, no solution.
It really drives me nuts to open IE8 only to play some WMV files in the browser. I hope someone can shed some light on this issue.
Strange thing I noticed: I can't see how I can manage my plug-ins. There seems to be no tab for it in the Safari settings and in the program-files folder I can only find Java.
Thank you so much for your time and effort.

I looked up the internet but can't find anything on this. As no replies here too I guess I'm the only one. The other thing that struck me is the enormous CPU usage when playing flash in the browser. Up to 95%-100% cpu usage when playing HD flash content. First I assumed it was a Flash issue but Internet Explorer never used more then 35%-55%. I then assumed it was just Flash in Safari. Strange thing is, if I maximize the window the cpu load actually drops to 55%. I only get high cpu usage when flash is played in the Safari window. I guess that means it's something to do with the browser and not an isolated flash 'bug'.
Also still no luck playing WMV in the browser itself. Maybe time to look for yet another browser. A shame as I like the Safari browser a lot. MobileMe and iPhone are great to sync bookmarks and the look and feel is great. The engine is not so good unfortunately.

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe Flash Player and Shockwave crashing has disabled my computer

I have downloaded a second flash player and it is still the same. Firefox has been crashing daily for a few weeks. I noticed that your adblocker plus was updated 6/4. Since then I have almost no use of firefox, because the Adobe flash player 13.0.r0 and Shockwave crash notices are constantly popping up. Could that update have something to do with why the flash players are not working? Below are an example of the crash details.
Thanks for the help. I prefer your browser, but this has made it non-functioning.
In trying to fix it, a window came up that asked would I like to change it back to a previous working image, which was Windows XP. Although this computer is Windows 7, I clicked the box yes, and said I wanted it to work like Windows XP. I see in your Operating System below, that it reads Windows Xp, but this computer is actually Windows 7. I can't find that menu to change unclick and change it back, so that it is working as Windows 7.
Problem Event Name: APPCRASH
Application Name: FlashPlayerPlugin_13_0_0_214.exe
Application Version: 13.0.0.214
Application Timestamp: 5359c61d
Fault Module Name: StackHash_27eb
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 6c2b92cd
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 27eb
Additional Information 2: 27eb358fe674a6f15dafe56d42bb9bf3
Additional Information 3: 2f06
Additional Information 4: 2f06c18113e6d7c00e6b91fa1fde84b6
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

AdBlock Plus isn't maintained or connected to Mozilla as they didn't develop it. ABP and Flash don't interfere with each other except on same cases that ABP blocks Flash content.
You can Try disabling Hardware Acceleration. <br>
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
If that doesn't work try Try to disable Protected Mode in Flash 11.3 and above by adding the line ProtectedMode=0 to the Flash "mms.cfg" file located in one of these locations: [46]
(Windows 32bit) C:\Windows\System32\Macromed\Flash
(Windows 64bit) C:\Windows\SysWOW64\Macromed\Flash
For example, on a Windows 7 64-bit system, open the C:\Windows\SysWOW64\Macromed\Flash folder, copy the file "mms.cfg" to the desktop, open it in Notepad, add a new line <code>ProtectedMode=0 </code> and then close Notepad, saving your changes. Next, go back to the C:\Windows\SysWOW64\Macromed\Flash folder, rename the original file to "mms.cfgBAK" (to save it as a backup) and then drag and drop in the modified "mms.cfg" file from the desktop. [47] [48] [49]
Note: To re-enable Flash Protected Mode, either restore a backup of the original mms.cfg file, if you saved one, or else re-edit the mms.cfg file to remove the <code>ProtectedMode=0 l</code> line you added. Updating Flash Player or installing a newer version does not automatically re-enable Protected Mode
Flash has been a pain since day 1 and Mozilla is currently working to replace Flash with Shumway. Unfortunately it's in the Nightly channel, doesn't come activated automatically and it isn't quite ready for normal usage. I just tested Nightly yesterday with Shumway and it wouldn't play.

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

What OS are you running.. this is usually only a problem in Mavericks.
If so I recommend you mount the hard disk manually..
Use Go, Connect to server.
Type in the IP address if static.. eg
AFP://10.0.1.1
Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
Type in
AFP://TCname.local Where TCname is replaced with the actual name.
You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

Shared (central) player and skin issues

Similar Messages

Maybe you are looking for