Sharepoint Crawler database went to emergency mode

Hi,
My SharePoint Crawl Database went on Suspect mode suddenly & now i need to bring on Online mode.
For solving this issue, i Google on several sites & came across following steps,
Steps:
EXEC sp_resetstatus 'DBName';
ALTER DATABASE DBName SET EMERGENCY
DBCC checkdb('DBName')
ALTER DATABASE DBName SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DBCC CheckDB ('DBName', REPAIR_ALLOW_DATA_LOSS)
ALTER DATABASE DBName SET MULTI_USER
DBCC CheckDB ('DBName')
Now the problem is Step 1 & 2 completed successfully, but when i tried step 3 it is throwing me below error,
Msg 945, Level 14, State 2, Line 1
Database 'DBName' cannot be opened
due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I am using the service account which has full rights on the server & through which the SQL Server 2012 was configured.
Current status Database is in Emergency mode & I am stuck over there.
Please help.
Regards,
Purvish Shah

Hi Alberto,
Thank for the reply.
I updated the Database with the below query ,
ALTER DATABASE [YourDB] SET SINGLE_USER;
GO
It completed successfully, but the database is still in the
"Emergency mode".When i checked in the logs it says
Message
Setting database option SINGLE_USER to ON for database 'DBName'.
Regards,
Purvish Shah

Similar Messages

Database in Emergency Mode

Hi All.. i have had one database was in suspect mode and i have changed the status to Emergency Mode and i have run the DBCC checkdb and command didn't gave any error.. after this i have tried to change database to Single_user mode, but command running
successfully, but database status is still showing as Emergency mode only.. i have tried for multi_user mode too..
Also, i have tried to run the command to bring online, but command running for long time with Suspended status..
Could anyone help me on this??

Hi Balajik,
"Also, i have tried to run the command to bring online, but command running for long time with Suspended status.."
In addition to other post, please check the following things.
1. Run sp_who2 to check that if there is blocked process. If blocked process exists, run “KILL <spid>“ to kill it.
2. Make sure that there are no connections to the database from other applications. You can run the below scripts to find connections.
USE master
SELECT * FROM sys.sysprocesses WHERE dbid = DB_ID('DatabaseName')
3. You might need to stop and start SQL Server Service using SQL Server Management Studio, then check if you can set the database online.
Besides, to recover database which is in emergency mode, you can review the following similar thread.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4186ba24-5188-4ea9-bb83-f39d44f1897d/database-in-emergency-mode?forum=sqldatabasemirroring
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Availability Group Database( secondary) went to Suspect mode. What is the solution?

Hi Folks,
database went suspect mode in secondary server. ( sql 2012 SP1)
1. How to bring online,Is it possible withuot breaking primary.
2. can we access only primary.
3. What are the modes ( not_synchronzing, suspnded etc.)
Could you please explain , how to bring databace into synchronzing mode.
Many Thanks.

Any info in the ERROL.LOG,Event Viewer??? Generally, databases go into suspect mode because disk failure ,io..
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Install SharePoint 2013 database on SQL server 2012 SP1 cluster

Good Day all,
We are trying to install SharePoint 2013 database on a SQL server 2012 Enterprise with SP1 cluster (configured for mixed mode) but the connection is not working (times out). We can telent the SQL cluster network name on port 1433 and we made
a UDL connection file, test the connection via windows authentication and it is working, but if we use the sql authentication it is not working.
Also we have two SharePoint 2013 servers connected via NLB.
Any idea about this issue guys?

event if 3355 means 3 things:
The SQL Server might be offline.
The SharePoint Foundation database access account might not have the necessary permissions to communicate with the SQL Server.
A firewall that runs on either the local server or on SQL Server might be blocking network communications.
Big question, how you trying to connect SQL windows or sql authentication? is it throwing error on Config wizard or somewhere else?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Database went in quiesce state?

I am on Oracle 11.1.1.0.7 on HP UNIX . This morning, I came to know no one could connect to database from application logins. Some of the application logins have sysdba role. I could however login to database from system and sys. I just restarted the database and problem went away.
I looked in alert.log to find root cause. I see a line that database in quiesce mode
Mon Sep 26 21:20:04 2011
LNS: Standby redo logfile selected for thread 1 sequence 4063 for destination LOG_ARCHIVE_DEST_2
Mon Sep 26 21:42:21 2011
Database in quiesce mode
I do see archive logs are still being generated afite 21:42 as shown in alert.log
. No one ran any alter database to put it in that mode. I do not know why it went in that mode (if it did). I would think if database was in that mode, when connecting to database, one will get a message that database was in that mode instead of just getting hung. Also, should login with sysdba privilege can login even when it is that mode. Appreciate any insight.

user632098 wrote:
No explict altter system quisce was issued by DBA or any of utilities. I was trying to deconfig db control which was not working and in all likelyhood Oracle internally puts database in quisce mode when that is done ( i do not see any documentation on it).Well, it is documented ,
http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/dbcontrol005.htm
Aman....

SharePoint Content Database Log Truncation

Upon searching the web I found that DPM 2010 does not truncate the SQL log when it does the express full. Logs are truncated only when someone does a incremental (log backup)
Now For sharepoint content db, DPM does not do SQL transaction log incremental backup right?
So how are the content db logs truncated?
My recovery type is Full (we use mirroring). Should I backup the databases manually for the log truncation to occur?

They way this works is that DPM will back up the content database, and then back up the ldf file associated with it. You will see entries in the application event log corresponding to each action. The important ones to note will be:
Log Name:      Application
Source:        MSSQL$MIRRORA
Date:          4/28/2015 7:53:17 PM
Event ID:      18264
Task Category: Backup
Level:         Information
Computer:      CButchSQL1.domain.com
Description:
Database backed up. Database: WSS_Content_number4, creation date(time): 2015/04/24(19:20:20), pages dumped: 2282, first LSN: 173:445:49, last LSN: 173:465:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE:
{'{72BA7E1C-DB2D-4C40-B4A1-BDAF62B6E213}1'}). This is an informational message only. No user action is required.
This one of course indicates your content database was backed up. After that, you should see:
Log Name:      Application
Source:        MSSQL$MIRRORA
Date:          4/28/2015 7:53:25 PM
Event ID:      18265
Task Category: Backup
Level:         Information
Computer:      CButchSQL1.domain.com
Description:
Log was backed up. Database: WSS_Content_number4, creation date(time): 2015/04/24(19:20:20), first LSN: 173:163:1, last LSN: 173:472:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'C:\Program Files\Microsoft
SQL Server\MSSQL10_50.MIRRORA\MSSQL\DATA\DPM_SQL_PROTECT\CBUTCHSQL1\MIRRORA\WSS_Content_number4_log.LDF\TempLog\TempLog.log'}). This is an informational message only. No user action is required.
DPM essentially does a temporary backup of the log to the temp location listed and immediately deletes it. Once the log file is backed up for a database in full recovery mode, SQL will then truncate the log automatically for you. If you see the
18265 event and the db is in full recovery mode, then SQL is failing somehow to truncate and should be investigated. If you see 18264 but then no 18265, then you should check to be sure this isn't DPM R2 UR5 protecting SP with SQL Always On backend as
we are investigating an issue where DPM is not properly backing up the log files. Right now, you can manually truncate those log files until a fix is created.
Thanks, Chris Butcher - MSFT This posting is provided "AS IS" with no warranties, and confers no rights

Iphone in emergency mode after trying to download 3.0 HELP!

I can't seem to finish the download of 3.0. Any tips? My phone is only in emergency mode and didn't take to the download.

I have the same problem. I have a 3G Iphone 3.0, I wanted to update to the 3.1 new version. I had problems with some apps. that's why i've decided to restore to the original factory version. the restore process failed and my Iphone is stuck on emergency mode. I don't know why. I had the 8.2 Itunes, i couldn't upgrade to the 9 new version therefore i had to eliminate completely the Itune and install it again. BIG Mistake. I have lost all information of my iphone there as well. Now i have lost everything and my Iphone still doesn't work. I have tried everything that I have found on forums. I won't risk eighter with jailthing. The same message appear on ITunes over and over again: "ITunes could not connect the Iphone because of unknown error." I am Tired after 6 hours. I give up. I think i'll go to the apple store and see if they give me a new phone.
This is the second time. The first time It was a miracle. It fixed itself. Today I haven't been so lucky. But I've learned that apple has a huge weakness with Iphones and Itunes, lock and unlock war.
I have to say I am really disappointed. Steve jobs is not doing his job. Bloody block & unblock war that doesn't have any sense. The only people who is suffering are people like us that just want to enjoy and use the bloody phone we've payed for. This market is not regulated. It 's the bloody wild wild west. Why people are so greedy...it's never enough.
Next day...
I went to the apple store, they fixed in 3 minutes. My iphone is now activated. They said that probably is the low connectivity on the internet that could lock the iphone as the software couldn't download properly.
Unfortunately all my data is now lost. However I have downloaded the Stellar pheonix recovery data tool to get all the information tat I have deleted from the Itunes. for thois I will need an external disk drive to save all the recovered information. It cost me US$99.00. Lets hope i can get all my data back, contact, photos, music, etc...

Stuck in emergency mode

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Christmas Eve we were on our way to visit family, came around a curve on the country road and found a van that had wrecked and flipped in the road in front of us. I called 911 and then discovered I was stuck in emergency callout mode.
I knew Sprint would tell me I had to do a hard reset, so I quickly did a Sprite Backup, so I wouldn't lose my contacs. My most recent backup was a month old.
I performed a hard reset, which fixed the emergency call mode lockout. However as soon as I restored my backup from the day, I went straight back into emergency backup mode. Repeated the process a couple times, googled around and found that the registry would have to be fixed. Called sprint, they said I'd have to wait until after Christmas holiday was over and go into a store. Googled some more and pieced toghether this answer:
You need to download and install a free registry editor called:
PHM Registry editor - you will find it at http://www.smartphonefreeware.org/download/phm-registry-editor-0.70
Use the registry editor to follow the selections to get to the following paths and delete the value at the end (see details below to show you exactly how):
(UNDER HKEY CURRENT USER) HKCU\ControlPanel\phone\emergencymodetimeout
(UNDER HKEY LOCAL MACHINE)
hklm\software\microsoft\today\items\"active call"\emergency_hwind
This program is a bit tricky for a novice, especially. When you open it, you'll see four HKEY listings: root, current users, local machine and users. Click HKEY Current User then Control Panel, then Phone. You'll see "State" but do not click on it... instead, click on Values, at the bottom left of the screen. Scroll down to "Emergency Mode Timeout" click on it and then click Menu and Delete at bottom right of screen.
Duplicate the process for the Local Machine key.
Once you've deleted these, remove your battery to do a soft reset.
You should be able to call after the reboot finishes. Merry Christmas and best wishes!

Change SharePoint_Config Database to simple recovery mode. Risk.

Hello,
we have SBS 2008 with Exchnage and OWA-Service.
The Logfile of SharePoint is very large (30 GB).
But we don't use SharePoint.
I want to change the recovery mode of SharePoint_Config Database to simple.
But i don't know, what of Application/Services/Programms use SharePoint Database.
What are the risks of changing SharePoint_Config Database to Simple Mode?
What of the Sevices/Programms use SharePoint Database ?
Thank You

Hi ,
As Dimitri pointed out, SharePoint DB is in SQL database, the change of it won't affect Exchange and Outlook Web Access.
If you use SharePoint in future, you may take a look at the following article about the effect to SharePoint database with simple recovery mode.
http://searchwinit.techtarget.com/tip/How-SQL-Server-recovery-models-impact-your-SharePoint-databases
Thanks
Daniel Yang
TechNet Community Support

Flipping between AT&T LTE and Emergency mode

Greetings,
I am the proud new owner of a BlackBerry Z10. Within a few days of getting the phone, I noticed it was flip-flopping constantly between AT&T LTE and emergency mode. I could not make or receive calls, and text messages I sent were often received multiple times. Here are some of the steps I took to try and resolve the problem:
1. Went to the AT&T store and had a new SIM card installed
2. Several days later, I went back since the problem persisted. They provided a replacement phone.
3. Performed a security wipe, interrupted it part way through, and performed a fresh install from a PC using BB Link.
4. Called AT&T support, who suggested replacing it with yet another phone. However, this didn't seem helpful since I purchased the original phone in Pennsylvania and swapped it out the first time in Texas - I wouldn't think they'd have phones from the same "batch" in such geographically disparate locations.
I'm out of ideas on what else could be causing this and would greatly appreciate any insight the community here could provide!
Thanks in advance!
Solved!
Go to Solution.

Thank you for the help and suggestions! I worked with AT&T support and they "did something" ...the phone has been stable and working flawlessly for a few weeks now. Unfortunately I'm not sure exactly what they did to correct the problem; all I know is that it went to their "L3 support" who in turn worked with Blackberry. It took them about a day to fully fix the issue but since then, it's been all blue skies.
Thanks again!

Sharepoint crawl db growing exceptionally after full crawl run..

while we run the crawl sharepoint crawl db growing exceptionally.....drive is running out of space.
lots of errors coming in crawl.....it is trying to do the crawl even on thoese sites which were moved, deleted or URL changed.
everything is showing in crawl.....any script/suggestion please?

how many documents you are crawling? full crawl will crawl all sites if its deleted then it delete from index but 1st check and make sure.
check these post:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0d95c9c-5797-4818-9189-609a48af59d0/crawl-database-size-is-growing-rapidly?forum=sharepointgeneralprevious
http://www.itwalkthru.com/2011/11/sharepoint-2010-application-crawl-store.html
for deletion of item from index may be need to play with deletion policy:
http://technet.microsoft.com/en-us/library/hh127009.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

My Macbook Pro won't turn on properly. It was perfectly fine when it went into sleep mode earlier on today, please help?

Closed the lid earlier on today and my macbook pro went into sleep mode. about 12 hours later i opened it and the battery was dead. Plugged the battery charger in and pressed the power button. It boots up, disc drive works and it sounds the same as it would working perfectly fine. Keyboard works and there is noise coming from the laptop when i press certain buttons like the volume etc but the screen isnt working. Unable to enter FireWire targert disc mode to fix the sleep mode files which is what i think is wrong with it but i don't have a FireWire and i don't really want to be playing around with my macbook's internal files incase i accidentally touched the wrong thing. Does anyone know what could be wrong? Should i just take it to get repaired and let a specialist repair it? Anything i should know about/be doing/not doing?

Plug it into a power oulet & then reset your SMC:
http://support.apple.com/kb/HT3964

Error: 1013231 Unable to update database while in readonly mode for backup

Hi all,
Wen im deleting the members for dimendsion , its giving error (hyperion 11.1 aso)
Error: 1013231 Unable to update database while in readonly mode for backup , how can i solve this problem ,plz can any one help on this
Thanks

Has somebody set the database ready for archiving, maybe some maxl has been run and the db has not been returned from read only mode.
Try running the following Maxl (change app.db to match your app/db)
alter database app.db end archive;
Cheers
John
http://john-goodwin.blogspot.com/

Tried updating my iPad mini to iOS 8, it went into recovery mode and when I try to update then restore it on iTunes it says the download will last 300 HOURS and then it says something like "Connection failed"?

I tried uppdating my ipad then it went into recovery mode. I thought "oh no problem, my phone has done this before". So, I hooked it up to iTunes and started to restore/update it, but when the update began, it said it would take 24 hours to download. Already abnormal. Then, the number kept rising higher and higher until it got to 300 HOURS. Then, once it reaches a certain 300, it says "connection failed. please check to see that you have a working connection or try again later" or something like that. So, my iPad is now stuck in recovery mode and I can't exactly talk to people now. What do I do?

Hello aZaa4401
Sorry to hear about your issue. I would start your troubleshooting with the article below to check to settings of your computer to make sure your connection is good to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
-Norm G.

My iPhone 4s randomly went into recovery mode and iTunes can't get it to restore.

Last night my iPhone randomly went into recovery mode on me. Just before I went to sleep a bunch of static lines appeared across the screen. The screen went dark and a few seconds later the Apple logo appeared. A few seconds later is disappeared. A few seconds later it came back. So on and so forth. I thought I had turned it off and was going to deal with it in the morning, but when I woke up the iPhone still just had the Apple logo going on and off again.
I've tried everything today. All the different button hold methods out there. I've tried to sync it to iTunes but the same **** keeps happening over and over again.
A message pops up saying "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." So I press OK. Then I press the "Restore iPhone..." button on iTunes. It asks me if I'm sure I want to "restore it to the factory settings" and I click "Restore and Update". It then says that its "extracting software", "preparing the iphone to restore", "waiting for the iphone", then "verifying iphone restore with Apple". As this is going on the "connect to iTunes" sign is shown on the screen of the iPhone. When the "waiting for the iPhone" part starts, my screen goes black, then the apple logo pops up. The "verifying iphone restore with apple" comes on the iTunes and the status bar appears underneath the Apple logo on my phone's screen. It sits there for a couple of seconds with no progress and then the screen goes black. Then iTunes has the same **** message saying "The iPhone 'iPhone' could not be resotred. An unknown error occured (9)."
I've gone through this process countless times in the past few hours and have done everything that apple support has told me. The windows system is fully updated. So is the iTunes. I've restarted the computer. I have no idea whats wrong and its making my blood boil.
A couple of notes about the phone:
It's over a year old. It's never had water damage. It was nearing the max capacity of its internal storage. This has never happened before. I keep it in an Otter Box. I had very little problems with the phone. Lately a couple of apps like snapchat and the barstool sports app were taking a little longer to open up or would randomly close out and sometimes my camera would take a while to get going. But this problem is just ridiculous and completely rendered the phone useless.

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

Sharepoint Crawler database went to emergency mode

Similar Messages

Maybe you are looking for