Sharing internet with 2 USB ethernet adapters?

Is it possible to connect the MBA via one USB Ethernet adapter to a LAN and share it with another USB adapter? Basically internet sharing from wired to wired.

...but the only way to know for sure...is to buy a 2nd USB Ethernet adapter which is a waste of money if it doesn't work
I didn't bring it up in the previous post, but since the discussion is going to continue...I would argue that getting a second USB wired ethernet adapter is a "waste of money." Why not get a router? OSX's Internet Sharing turns the Mac into a NAT device. This is the primary function of a typical home router. For about the same price as (or only a few dollars more than) the Apple USB ethernet adapter, you can get a router which will probably provide better throughput performance than Internet Sharing, especially if the machine you're sharing to is doing a heavy download, it likely slow down your machine even if you're not doing anything on the internet. (e.g.: Your Word Processing may will slow down if the other computer starts streaming Netflix.)
You can get small routers, if portability is needed and the 4-port wired switch is not essential. (i.e.: the Macbook has built-in wireless, as does most if not all portable computers.) I got one from D-Link that is the size of a deck of cards and runs off a USB port so no AC power is needed (although an AC adapter is included.) And of course Apple has the Airport Express.
To put it another way: you got a Macbook Air, which doesn't have any wired ethernet ports, but now you want two, and will use up all of your USB ports to do so. One could argue that you got the "wrong computer" for your needs. And even then, I would argue that a router is the "correct computer" to share one wired network connection.
Or can you make the defense and show significant negatives to using a router in your use case. And you have to go beyond price because a wired router is around $50 and often goes on sale for as low as $30, the same as the Apple USB ethernet adapter. And a wireless router is in the $70 range, with sale prices going down to $50. So I argue that a router is a better value.
(edit: for that matter, I forgot to ask, what kind of network connection are you trying to share? If it's like a university or other LAN where you can obtain more than one IP address, then you don't even need a router. A simple hub/switch will do, which I've seen on sale as low as $10, and free when people throw away their old junk. Hmmm, the price of the router could now be $0 if you have a friend that is upgrading their router to 802.11n. )

Similar Messages

  • Using modbus/TCP with USB ethernet adapters

    I have a test stand where I have a handful of USB instruments and a single modbus/TCP slave.  I'm considering adding a USB ethernet adapter to the stand so that there is a single USB cable connecting the computer to the hardware rather than both a USB and an ethernet connection.  Does anybody out there have experience (good or bad) using USB ethernet adapters with modbus/TCP slaves?
    The existing USB instruments all use ASCII/SCPI-style command sets.  The Modbus/TCP slave is an Automation Direct EBC-100.  Nothing high-bandwidth or low-latency.  Basically, the computer issues no more than a handful or command or request (ether SCPI or Modbus/TCP) per minute.
    Mark Moss
    Electrical Validation Engineer
    GHSP

    Adam G wrote:
    Hello Mark,
    I was wondering what NI hardware you are going to be using in your application? Also are you going to be using LabVIEW for the programming? Have a great day!
    Best Regards,
    Adam G 
    The test software is written in LabVIEW, and the test stand uses M-Series cards for data acquisition.
    Mark Moss

  • Sharing Internet with AirPort

    Hello
    Okay to start my iMac here is connected directly to a DSL modem with no router through Ethernet. I saw that you can share Ethernet connections and use AirPort to create a Computer-to-Computer network and enable internet connection sharing. Would this work properly with a Windows XP computer with a wireless card in? I want to be able to get that computer on the net.

    Okay to start my iMac here is connected directly to a
    DSL modem with no router through Ethernet. I saw that
    you can share Ethernet connections and use AirPort to
    create a Computer-to-Computer network and enable
    internet connection sharing.
    System Preferences > Sharing > Internet
    Share built-in-ethernet connection via Airport.
    Would this work properly
    with a Windows XP computer with a wireless card in?
    Yes, but you won't be able to use a password with an XP PC therefore is not recommended.
    I would recommend getting a wireless router.
    iFelix

  • USB Ethernet adapters?

    Hi
    Is there any USB ethernet adapters i can get to plug in my ethernet cable to, so i can connect to my local netwrok as there is something wrong with my ethernet card??
    If so can someone tell me the name and model number?
    Thanks

    iMac? try asking over in the Discussion devoted to iMac G5
    No internal PCI slots, so that is out. However, there is IP over FireWire which might be possible to network off another FW based Mac.
    http://discussions.apple.com/category.jspa?categoryID=132

  • Sharing Internet with xbox 360

    Hi, I have my Powerbook sharing internet with my Xbox 360. The connection works well and I am able to play games, but the NAT is listed as Moderate, with a Moderate NAT I am not able to do private voice chats with people. Does anyone know how I can get my NAT to Open? Also, I would like to share my media with my Xbox that is stored on a Windows XP computer. I followed all the steps given at www.xbox.com/pcsetup, but the Xbox still does not see the computer.
    Any help would be appreciated, Thnx

    If you are using Internet Sharing on your PowerBook you can forget trying to modify NAT settings or make nearly any other adjustments. There are very, very, very few options.
    If you want to make adjustments like that you need to get a real base station.

  • Problems with sharing internet connection via usb

    I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
    For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
    PS I have unliited cellular data and iPhone is my only internet connection at home,

    Mark,
    There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
    If I remember correctly (book is on loan)
    1: System Preferences>Network>Show>network port configurations (click unlock)
    2: Click>Built in Firewire and drag to the top of the list (why I forget why)
    3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
    4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
    5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
    6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
    anyway play with it, you'll figure it out. if someone doesn't get to you.

  • If I suspend wireless connectivity can I then use the camera connection kit along with the usb ethernet adapter to connect to the internet?

    If I suspend wireless connectivity on my Ipad2, can I then use the camera connection kit alond with the Apple USB Ethernet cable to connect to the internet?

    No, you can't.

  • Sharing internet with Windows over AirPort

    My G5 tower is connected to typical home router via ethernet. This gives it flawless internet connectivity.
    To give better wireless access to mobile devices that come to that room for a visit in the far corner of the house where the G5 is located, I got a used AirPort Extreme card for the G5 and installed it, making sure to attach the antenna connector and small t-shaped external antenna (provided with original G5) plugged in the back.
    When I powered the G5 back on, it immediately saw the AE card and told me to review settings and press Apply. Under Network prefs, under "Location: Automatic", I chose "Show: AirPort." An AirPort ID is shown, along with the default setting below: "By default, join 'Automatic.'" I left all other network settings as they are--I am not trying to use AirPort to connect the G5 to the main wireless router, since it already has ethernet.
    I went to the "Sharing" pref and chose the third pane under it, "Internet". I configured it to read: Share your connection from built-in ethernet . . . using (checkbox on) AirPort. I clicked on the AirPort options in this same pane, and typed in a network name: "ABC wi-fi". Channel is Automatic, and--to keep things simple for now--I left encryption off. I pressed OK to close that small dialog, then hit "Start" in the Sharing/Internet pane, which makes its status message change to "Internet sharing on: sharing your built-in ethernet connection." Success! Well, no.
    The AirPort icon in the menu bar was a blank quarter-pie. So I clicked on it, and saw the "open internet sharing" option. A panel appeared where I could turn airport on. I did. The grayed-out Network line of the pane then showed the name of the network I had created back in the Sharing dialog: "ABC wi-fi." And the signal level indicator shows full power, all to the right. All set? Nope! When I go to my Windows laptop and find this new network, I see two new options: One, strangely, is the "Computer Name" shown in the Sharing pref panel, and clicking on it to connect doesn't work. The other option is the network I actually named and shared, "ABC wi-fi," but when I attempt to connect to it, Windows (actually Intel PROSet/Wireless Wi-Fi Connection Utility) insists on stepping me through a series of complex security settings, when it would seem that no security should be required since I didn't enable encryption on the AirPort connection.
    Giving up on those security settings, I go back to the Sharing control panel and turn sharing off. I hit the AirPort options button and turn encryption on I leave on WEP 40-bit, which requires me to type in a five character string. I do so. I click OK and restart internet sharing. Again, I am given confirmation of "Internet sharing on: sharing your built-in ethernet connection." I try to connect from Windows again, but am not even presented with the complex security options. It just says "Unable to connect," even though it can clearly see the SSID. I try the same a few more times--no luck. I go get an iPod touch and select the new G5-based network--type in the five characters required for WEP 40-bit, and jump right on. Why can't my Windows 7 laptop connect?

    Good advice from rccharles, do try that, but I'm wondering if it might be related to Digitally sign communications, even though this talks about server & connecting the other way...
    http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x

  • Compare transmission speed between thunderbolt gigabit and usb ethernet adapters

    As the new MBA has an accessory (Thunderbolt ethernet adapter), will its transmission speed be significantly faster than using an old USB ethernet adapter in one of the new MBA's USB ports?

    An emphatic yes. The new t-bolt adapter should be many times faster, provided all the other links in the chain support it. I mean, plugging a gigabit adapter into a 10/100 router port, or using a slow internet connection will at least partially negate the advantages.

  • Sharing Mac internet with XP via Ethernet

    Hi
    I'm having problems sharing a MAC internet connection with windows
    I've done, successfully:
    Internet <--> XP <--> MAC
    but now I want to do:
    Internet <--> MAC <--> XP
    Is there a simple guide somewhere?

    On the PC in a browser try http://17.254.0.91
    Doesn't find the MAC site - hangs
    How is the Mac connecting to the internet (ethernet
    for example), how are you trying to share it (airport
    for example).
    Mac connects USB Speedtouch USB ADSL modem
    Sharing via ethernet connection 192.168.2.1 255.255.255.0 - firewalled
    Firewall on MAC and XP switched on - even with XP Fw switched off it doesn't work. XP = 192.168.2.2 via Gateway of 198.168.2.1 255.255.255.0

  • Sharing Internet with windows, connected by ethernet, using mac's airport

    So I have a desktop that doesn't have Wi-Fi and I too cheap to buy anything for it. So I'm trying to use the MacBook's airport to give the Windows internet through the ethernet connecting them both.
    I went to internet sharing and entered "Share connection from: Airport" "To computers using: ethernet." and that's all I got up to so far.

    Now connect the two computers via an Ethernet Cable and you should have internet access on the PC.
    Make sure you set up the PC to use the Ethernet port for network / internet use.
    Message was edited by: Ian Parkinson

  • Sharing Internet with a windows laptop via ethernet on airport express base

    Hi
    I have a Linksys wireless router which is connected to my G5 Imac, I also have an airport express base station. My wife's laptop does not have a wireless card. Can I plug an ethernet cable into the Airport Express base station and get the laptop connected. What is the best way to configure all this. Help will be much appreciated.
    K.

    you have 2 choices. Actually three but i would use choice 1.
    1. Set-up the Airport station using DHCP to assign addresses dynamically to connected (or wireless users). The computers must be set to DHCP.
    2. Set-up using Manual IP assignment.....uhm you have to do it manually. Your laptops must be manually assigned IP address via thier network control panels.
    3. The linksys router should do all of the above, but using the Apple software to do the above is easier using set-up assistant.
    IMPORTANT: Make sure you do not have both wireless devices trying to do the same thing at the same time!!
    One must be set-up as a dumb router/hub.(see your instructions)
    Hope that helps.
    Once you are set-up, In order for a PC to sign in, on the Apple base station you have to click on "Password" in the Airport software and have it reveal the "HEX equivalent password (WEP key)" for PC. Your wife would enter this in her PC connection gui.
    Hope this helps
    Norbert

  • Sharing Internet with another Mac via Bluetooth

    I'm trying to help my wireless-less iMac G5 get online. It sits about two inches away from a MacBook Pro on my desk, which connects to the household wireless network via the in-built AirPort card. I'm hoping I can share that AirPort connection via Bluetooth.
    Both systems are running Leopard, although the G5 is running a vanilla 10.5.0 install since I can't update without an Internet connection. The MacBook Pro is up-to-date and then some.
    On the MacBook Pro, under System Preferences -> Bluetooth -> Advanced, I've checked "Share my Internet connection with other Bluetooth devices." Under Sharing, I've turned on Internet Sharing from AirPort to Bluetooth PAN. I've also paired the devices together.
    I'm trying to connect from the iMac G5 to the MacBook Pro with "Connect to Network" in the Bluetooth menu. However, it's grayed out. If I do the same from the gear menu in System Preferences -> Bluetooth, nothing occurs.
    This seems like a pretty complicated process for a technology that's meant to make networking child's play.

    You're making life very complicated for yourself!
    1) Bluetooth is far too slow for sharing an internet connection, unless you like accessing the internet at dial-up speeds or less.
    2) As the computers are so close, just run an Ethernet or Firewire cable between the two to create a network, and share the internet connection over Ethernet or Firewire.
    3) You can easily update the G5 to the latest Leopard by downloading the standalone updater on the internet connected Mac from the Apple web-site, then just copy the Update to the G5 via CD, DVD, USB Disk, Firewire Cable, Ethernet Cable, external hard disk etc...

  • Sharing Internet with Xbox 360 *DNS* -- Previous Posts Didn't Help!

    I am running OSX 10.5.1
    I want to share my laptop's wireless connection with my xbox via the ethernet port.
    My router's IP address is: 192.168.1.1
    My PowerBook's airport IP address is: 192.168.1.3
    Under Sharing, I have set it to share my Airport with Ethernet.
    *In the ethernet network panel of my PowerBook, my settings are:*
    Configure: Manual
    IP Address: 192.168.2.1
    Subnet Masks: 255.255.255.0
    Router: 192.168.1.1 (if this is left blank, the xbox can't correctly obtain an IP address, don't ask me why, and occasionally, it stops my laptop from getting internet... weird)
    DNS Server: BLANK
    Search Domain: BLANK
    *On my xbox, I have set it to:*
    IP Settings: Manual
    IP Address: 192.168.2.2
    Subnet Mask: 255.255.255.0
    Gateway: 192.168.2.1
    DNS Settings: Manual
    Primary DNS Server: 192.168.2.1
    Secondary DNS Server: 192.168.2.1
    it gets as far as obtaining an IP address, but it fails the DNS check!!!
    I am at my wit's end!!!
    What can I do!?!?!?! I have tried everything.

    I'm not sure I can help troubleshoot your issue specifically, but I just went through the same process it sounds like you're trying to do and I found the following link to be very helpful:
    http://www.xbox360forum.com/forum/showthread.php?t=20812&highlight=share+wireles s
    2.0 GHz Macbook, 80 GB HD, 2 GB RAM   Mac OS X (10.4.8)  

  • Sharing internet with PS2?

    Is it possible to share my internet connection with my Playstation 2?
    Ex: My mbp is connected to an airport. -> I want to enable internet sharing so I can hook an ethernet cable into my ps2 and the other end into my mbp.
    Would this allow the PS2 to use the internet?

    it should be able to, i don't see why not. you should give it a try cause i would think you would have no problems doing so. you have nothing to worry about cause doing this will not hurt anything. just turn connection sharing on (and if it has the option to use the ethernet port select that) then hook the PS2 up to the ethernet

Maybe you are looking for