Ship to state is not avilable in the DTW Templet

HI experts
I want to Import business Partner Through but in the Template of BP Master in DTW Ship to State field and Ship to Block is
not available so how can i import this field through DTW without Address template of BP in DTW because i have only one Ship to address
Regads
Rajani P. Patel.

Hi
U have to use like this:BP Address template
RecordKey     LineNum     AddressNameAddressType    Block     City     Country     State
       1     0     Mr.R.B.Sharmabo_BillTo             Khadia Market,Khadia     Sonebhadra     IN     UP
1     1     Mr.R.B.Sharma bo_ShipTo             Khadia Market,Khadia     Sonebhadra     IN     UP
Giri

Similar Messages

Ship To location is not merging with the Shipment address in Purchasing 11.

As we can see in the attachment, the “Ship To” location is not merging from the “Ship To” on the Oracle PO, it appears it’s merging from the field on the Shipments tab/button (red boxes). We’d like to change that to have the “Ship To” on the PDF pull from the “Ship To” field where the green arrow is pointing. We’re not sure why both of those locations don’t always match (b/c sometimes they do match), however I think the quicker fix would be to change the merge fields, and then maybe at a later time we can look into why they don’t match.

http://docs.oracle.com/cd/A99488_01/acrobat/po115txn.pdf
I am checking the pdf , it does not give why this could be happening
It talks of different fields but it does not give the information why this could be hapening
Any thoughts or tables to be updated
thanks again
sri

Read statement is not supported in the BADI?

Hi,
Iam using read statement in the BADI.But iam getting error "READ dbtab" is not supported in the OO Context.How to change the below logic.
BADI Parameters is
NEW_INNNN importing type WPLOG.
My code is :
data: t_INNNN like NEW_INNNN.
data: wa_INNNN like NEW_INNNN.
t_INNNN = NEW_INNNN.
READ TABLE t_INNNN INTO wa_image INDEX c_1.
Please suggest me.
Regards,
Sujan

But in same BADI for other method some body using same logic.But there Read table was supported.
see logic what they implemented.
if sy-ucomm = 'UPD' or sy-ucomm = 'SAVE'.
                t_image = new_image.
                t_image1 = old_image.
                READ TABLE t_image1 INTO wa_image1 INDEX 1.
                IF sy-subrc EQ 0.
                  IF wa_image1-infty = c_1007.
                    READ TABLE t_image INTO wa_image INDEX 1.
                    IF ( wa_image-vdata(2) = c_x0 OR
                       wa_image-vdata(2) = c_x1 ).
                      CLEAR wa_image.
                      LOOP AT t_image INTO wa_image where otype = c_s.
                        v_objid = wa_image-objid.
                        v_begda = wa_image-begda.
                        v_endda = wa_image-endda.
                        v_open = wa_image-vdata(2).
                      ENDLOOP.
But method parameters is different there.
NEW_IMAGE importing type WPLOG_TAB.
here WPLOG_TAB is line type of WPLOG.
I will use the same code instead of new_image iam using NEW_INNNN.
How i will change the above code by using NEW_INNNN.
Kindly help me.I tried all the ways.But iam getting read table not supporte in BADI.
Regards,
Sujan

States are not displaying in the panel

Thank you!!!!!!!!!!!!!!!!!!

I don't know if this is related or not, but I found this Fireworks Help page regarding blank panels:
http://helpx.adobe.com/fireworks/kb/blank-panels-fireworks-cs5-cs5.html
From your graphic, I can't quite tell if there's something wrong with the canvas, too, in addition to the panel being blank.

DTW - BP Ship to State not populating

Why is it when I import bp data, the ship to state does not populate?
I do not see a field for this in the template.

Hi John,
When you are importing shipping addesses, please use the BusinessPartner Address template which has all the columns.
Only the Billto Address could be imported fully the BP Header template
Suda

Why everything i try to do on itunes it says item not avilable the item you requested is not currently avilable in the U.S. store

every time i click on itunes store or library or anything i choose to click on it says item not avilable the item you requested is currently not avilable in the u.s store but i did not request anything but to open itunesstore or check my library out im so frustrated

Similar experience here but finally succeeded! Here's the summary
Decided to (finally) update MacBook from SL 10.6.8 to Lion (it can't run ML or Mavericks) so this week purchased from UK Apple store. Received redemption code from Apple via email after couple of days and successfully redeemed this in Apps Store.
Under Purchases in Apps Store clicked on "download" and nothing happened! Clicking on the app name "OS X Lion" gave the message "The item you've requested is not currently available in the UK Store". Contacted support but got no useful help there.....
Following day went back to Apps Store and tried again clicking Download - still nothing (apparently - see below) so started thinking upgrade unlikely and £14 wasted.
A little later noticed new icon in Dock and investigating it said downloading Lion - checked Activity Monitor and indeed my internet connection was being hammered. At a little over 4Gb got an error message saying download could not complete (needless to say not happy) and download icon disappeared!!
So with nothing to lose reclicked Download in Apps Store and again no obvious activity and this time no new download icon in Dock - decided to check Activity Monitor again (just in case) and again high level of download activity! Maybe, just maybe, I thought and after about 90 minutes the Lion install screen appeared!
Have now backed up the Installer and successfully installed 10.7.4
I can't offer any explanation why it finally worked - Apps Store still shows "Download" not "Installed" as I would expect and the item is "..still not available.."!

Insert statement does not insert all records from a partitioned table

Hi
I need to insert records in to a table from a partitioned table.I set up a job and to my surprise i found that the insert statement is not inserting all the records on the partitioned table.
for example when i am using select statement on to a partitioned table
it gives me 400 records but when i insert it gives me only 100 records.
can anyone help in this matter.

INSERT INTO TABLENAME(COLUMNS)
(SELECT *
FROM SCHEMA1.TABLENAME1
JOIN SCHEMA2.TABLENAME2a
ON CONDITION
JOIN SCHEMA2.TABLENAME2 b
ON CONDITION AND CONDITION
WHERE CONDITION
AND CONDITION
AND CONDITION
AND CONDITION
AND (CONDITION
HAVING SUM(COLUMN) > 0
GROUP BY COLUMNS

Statement is not accessible in Exit include

Hi,
I have added code in the exit V05EZZWE (in system ECC 6). When i try to check it, it gives an Error saying "Statement is not accessible" at the beginning of the code. I tried going through some of the related links in the forum, but it is not clear to me why this is happening. Nonetheless, I can still activate the include and the main program.
Can anyone explain this error?
Thanks a lot,
Shivali

Did you already check this SDN - thread?
It looks very similar to your problem.
Re: Statement not accessible

Changes made order not refelecting in the Invoice

Hi Experts
I have two secnarios here
1. User changed the ship to party in the order and saved ,but when he checks the SH in the Invoice THE ship to party is not reflected in the invoice, the old SH is seen in the invoice, Plz suggest what wld be the reasons
2.The user rejected one line item at the order level with the rejection reason ,but still this line item is sen in the invoice, which is not supposed to show pls advise on this.
Many thanks

Please clarify, that changes were made after the invoice was created. If the invoice has already been created, that means that the goods have already been shipped to the initial ship-to party.. So why would it change? If the order is incomplete or you add some more materials then the new materials will be shipped to the new ship-to party and in the subsequent invoice the ship to will be the new one.
Now, if the change happened before Delivery, check that you didn't change the ship-to at item level, in only some of the items.. That of course would cause a delivery split...
In any case kindly give some more details...

Associated statement is not prepared.

Hi All,
I am trying to install Netweaver ABAP, while installing the "Central Database" [Uni-code], i am getting the following message.
<b>"ERROR 2006-07-11 08:58:23
MDB-05053 Errors executing sql command: [Microsoft][ODBC SQL Server Driver]Associated statement is not prepared"</b>.
This message popsup while do the following task.
<b>MSSQL: Grant DB access for OS user(BLRK432DSAPServiceW22)</b>
Have given Full rights to "SAPServiceW22" user.
Can anyone tell whats the FIX for this.
Thanks,
Shridhar.

Hi Shridhar,
I am encountering the same problem as you.
I am installing database instance now.
The same error
"MDB-05053 Errors executing sql command:[Microsoft][ODBC SQL Server Driver]Associated statement is not prepared" durning the MSSQL:GrantDB access for OS user(xxxx\SAPServicexxx).
Was your problem already solved ?
If so, please let me the solution.
Best Regards,
KOGURE Hiroto

My city and or state is not

My city and or state is not listed on the update list

Look at the update time for Miami then... You didn't figure that all cities in the world would be listed ?

Yesterday, i posted asking for help to get a Customer code working. Now the statement is not actually showing what what's its creating.

I pasted the statement into my form and it didn't have anymore syntax errors but now it is not actually creating the code. i type in the name and a phone number but nothing is happening?
If you need anymore info please ask. I'm not sure what else to post to help.

I am trying to Take the first letter from the Company Name/Customer Name and the last 4 digits from the customers phone number. add them together to create our customer code. IE, my name is sam and the last 4 digits of my number are 6770 so my customer code would be S6770.
here is the code that is under the text field i am trying to use.
form1.#subform[0].CustCode::initialize - (FormCalc, client)
Concat(Left(CustName,1) , Right(TextField9,4))
Heirachy:
form1
     -master page
          -page 1
               -(untitiled content area)
     -(untitled subform) (page 1)
          -rectangle1
          -text6
          -CUst.Type
          -CustName
          -SHip.Via
          -CustCode
          -TextField8[0]
          -Text23[0]
          -Text24[0]
          -Text25[0]
          -TextField8[1]
          -Text23[1]
          -Text24[1]
          -Text25[1]
          -CHeckBox2
          -Text26[0]
          -Text27[0]
          -TextFIeld9[0]
          -Line4[0]
          -Text26[1]
          -CHeckBox3[0]
          -Text27[1]
          -Line4[1]
          -Text27[2]
          -CHeckBox3[1]
          -Text26[2]
          -POReq
          -Text22
          -OfficeUseOnly
               -Text29
               -Text13[0]
               -PrintState
               -Text13[1]
               -interest
               -terms
               -CreditLimit
               -PriceMatrix
               -DropdownList1
               -TextFIeld11[0]
               -CHeckBox1[0]
               -CheckBox1[1]
               -Text15
               -TextField11[1]
          -DropDOwnList5
          -Deafult.Loc
          -Text28
          -Text15
          -CHeckBox1[0]
          -CHeckBox1[1]
          -TextField10[0]
          -TextField10[1]
          -TextField10[2]
          -TextField10[3]
          -TextField10[4]
          -TextField10[5]
          -TextField10[0]
          -TextField9[0]
          -TextField9[1]
          -TextField9[2]
          -TextField9[3]
          -TextField9[4]
          -TextField9[5]
          -TextField9[6]
          -TextField9[7]
          -TextField9[8]
          -TextField9[9]
          -TextField9[10]
          -TextField9[11]
          -TextField9[12]
Here is a picture of the form i am trying to make.

BACKUP LOG suddenly failed with Msg 35250, Level 16, State 11 The connection to the primary replica is not active. The command cannot be processed.

I have AlwaysOn SQL 2012 Enterprise set-up using Windows Failover Clustering Services (not FCI), and have 1 Primary node (P), 1 Synchronous Commit Auto Failover (SC), and 1 Asynchronous Commit Manual Failover (AC) node. It is set up to prefer secondary,
with the highest priority given to AC node.
I am using Ola Hollengren's scripts for Database Maintenance jobs, including a native BACKUP LOG job for the transaction logs of all user databases on a 1 minute schedule. His scripts already consider AlwaysOn, and although the job is set-up on all
3 nodes, only ever runs on AC node.
The job has been running successfully since initial set-up almost 1 year ago, but suddenly yesterday morning started to fail with the following error, only on 1 of the 13 databases in my availability group:
Date and time: 2014-06-08 09:36:11
Command: BACKUP LOG [my_db] TO DISK = N'E:\MSSQL\\Transaction Dumps\my_db\MySQLCL$MySQLAG_my_db_20140608_093610_U_LOG.trn' WITH CHECKSUM, COMPRESSION
Msg 35250, Level 16, State 11, Server AC, Line 1
The connection to the primary replica is not active. The command cannot be processed.
Msg 3013, Level 16, State 1, Server AC, Line 1
BACKUP LOG is terminating abnormally.
Outcome: Failed
Duration: 00:01:00
The other 12 databases continued to backup successfully.
Checking the Availability Group dashboard, windows event logs, and SQL Server error logs, including Failover Cluster events showed no issues.
However, monitoring software (Idera SQLdm) showed blocked sessions on P node. When I ran sp_who2, it showed that a background process was being blocked by another background process with an HADR BACKUP LOCK.
Since both processes were background processes, I was unable to kill either process. I temporarily disabled the transaction log backup job, but the blocked process was still active.
I ran DBCC CHECKDB (my_db) WITH all_errormsgs, no_infomsgs, data_purity on both P and AC nodes, with no errors. However, on AC node, it also showed 1 transaction rolled forward and 0 transactions rolled back. This also had the effect of releasing
the blocked background process, but another background process was now blocking with the same HADR BACKUP LOCK.
I tried to restart SQL Server Agent on AC node, which did not immediately seem to work. However, after a few minutes, I noticed that the block had disappeared. I re-enabled the transaction log backup job on AC and it started working normally
again. The error has not occurred again, but I am at a loss as to what happened, and how to prevent it from happening again.
Any help would be greatly appreciated.
Diane

And here is part 2 of the stored procedure:
--// Execute backup commands //--
WHILE EXISTS (SELECT * FROM @tmpDatabases WHERE Selected = 1 AND Completed = 0)
BEGIN
SELECT TOP 1 @CurrentDBID = ID,
@CurrentDatabaseName = DatabaseName,
@CurrentDatabaseNameFS = DatabaseNameFS,
@CurrentDatabaseType = DatabaseType
FROM @tmpDatabases
WHERE Selected = 1
AND Completed = 0
ORDER BY ID ASC
SET @CurrentDatabaseID = DB_ID(@CurrentDatabaseName)
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
IF EXISTS (SELECT * FROM sys.database_recovery_status WHERE database_id = @CurrentDatabaseID AND database_guid IS NOT NULL)
BEGIN
SET @CurrentIsDatabaseAccessible = 1
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
SELECT @CurrentDifferentialBaseLSN = differential_base_lsn
FROM sys.master_files
WHERE database_id = @CurrentDatabaseID
AND [type] = 0
AND [file_id] = 1
-- Workaround for a bug in SQL Server 2005
IF @Version >= 9 AND @Version < 10
AND EXISTS(SELECT * FROM sys.master_files WHERE database_id = @CurrentDatabaseID AND [type] = 0 AND [file_id] = 1 AND differential_base_lsn IS NOT NULL AND differential_base_guid IS NOT NULL AND differential_base_time IS NULL)
BEGIN
SET @CurrentDifferentialBaseLSN = NULL
END
SELECT @CurrentDifferentialBaseIsSnapshot = is_snapshot
FROM msdb.dbo.backupset
WHERE database_name = @CurrentDatabaseName
AND [type] = 'D'
AND checkpoint_lsn = @CurrentDifferentialBaseLSN
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
SELECT @CurrentLogLSN = last_log_backup_lsn
FROM sys.database_recovery_status
WHERE database_id = @CurrentDatabaseID
END
SET @CurrentBackupType = @BackupType
IF @ChangeBackupType = 'Y'
BEGIN
IF @CurrentBackupType = 'LOG' AND DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') <> 'SIMPLE' AND @CurrentLogLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'DIFF'
END
IF @CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'FULL'
END
END
IF @CurrentBackupType = 'LOG'
BEGIN
SELECT @CurrentLatestBackup = MAX(backup_finish_date)
FROM msdb.dbo.backupset
WHERE [type] IN('D','I')
AND is_damaged = 0
AND database_name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL
BEGIN
SELECT @CurrentAvailabilityGroup = availability_groups.name,
@CurrentAvailabilityGroupRole = dm_hadr_availability_replica_states.role_desc
FROM sys.databases databases
INNER JOIN sys.availability_databases_cluster availability_databases_cluster ON databases.group_database_id = availability_databases_cluster.group_database_id
INNER JOIN sys.availability_groups availability_groups ON availability_databases_cluster.group_id = availability_groups.group_id
INNER JOIN sys.dm_hadr_availability_replica_states dm_hadr_availability_replica_states ON availability_groups.group_id = dm_hadr_availability_replica_states.group_id AND databases.replica_id = dm_hadr_availability_replica_states.replica_id
WHERE databases.name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL AND @CurrentAvailabilityGroup IS NOT NULL
BEGIN
SELECT @CurrentIsPreferredBackupReplica = sys.fn_hadr_backup_is_preferred_replica(@CurrentDatabaseName)
END
SELECT @CurrentDatabaseMirroringRole = UPPER(mirroring_role_desc)
FROM sys.database_mirroring
WHERE database_id = @CurrentDatabaseID
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'PRIMARY'
END
ELSE
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_secondary_databases WHERE secondary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'SECONDARY'
END
-- Set database message
SET @DatabaseMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Database: ' + QUOTENAME(@CurrentDatabaseName) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Status: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Standby: ' + CASE WHEN DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Updateability: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Updateability') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'User access: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Is accessible: ' + CASE WHEN @CurrentIsDatabaseAccessible = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Recovery model: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') AS nvarchar) + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group: ' + @CurrentAvailabilityGroup + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group role: ' + @CurrentAvailabilityGroupRole + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Is preferred backup replica: ' + CASE WHEN @CurrentIsPreferredBackupReplica = 1 THEN 'Yes' WHEN @CurrentIsPreferredBackupReplica = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
IF @CurrentDatabaseMirroringRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Database mirroring role: ' + @CurrentDatabaseMirroringRole + CHAR(13) + CHAR(10)
IF @CurrentLogShippingRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Log shipping role: ' + @CurrentLogShippingRole + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base LSN: ' + ISNULL(CAST(@CurrentDifferentialBaseLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base is snapshot: ' + CASE WHEN @CurrentDifferentialBaseIsSnapshot = 1 THEN 'Yes' WHEN @CurrentDifferentialBaseIsSnapshot = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Last log backup LSN: ' + ISNULL(CAST(@CurrentLogLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = REPLACE(@DatabaseMessage,'%','%%') + ' '
RAISERROR(@DatabaseMessage,10,1) WITH NOWAIT
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
AND NOT (DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') = 'SINGLE_USER' AND @CurrentIsDatabaseAccessible = 0)
AND DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 0
AND NOT (@CurrentBackupType = 'LOG' AND (DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') = 'SIMPLE' OR @CurrentLogLSN IS NULL))
AND NOT (@CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL)
AND NOT (@CurrentBackupType IN('DIFF','LOG') AND @CurrentDatabaseName = 'master')
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'N' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'Y' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'DIFF' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'N' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'Y' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT ((@CurrentLogShippingRole = 'PRIMARY' AND @CurrentLogShippingRole IS NOT NULL) AND @CurrentBackupType = 'LOG')
BEGIN
-- Set variables
SET @CurrentDate = GETDATE()
IF @CleanupTime IS NULL OR (@CurrentBackupType = 'LOG' AND @CurrentLatestBackup IS NULL) OR @CurrentBackupType <> @BackupType
BEGIN
SET @CurrentCleanupDate = NULL
END
ELSE
IF @CurrentBackupType = 'LOG'
BEGIN
SET @CurrentCleanupDate = (SELECT MIN([Date]) FROM(SELECT DATEADD(hh,-(@CleanupTime),@CurrentDate) AS [Date] UNION SELECT @CurrentLatestBackup AS [Date]) Dates)
END
ELSE
BEGIN
SET @CurrentCleanupDate = DATEADD(hh,-(@CleanupTime),@CurrentDate)
END
SELECT @CurrentFileExtension = CASE
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'FULL' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'DIFF' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'LOG' THEN 'sqb'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'FULL' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'DIFF' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'LOG' THEN 'safe'
END
INSERT INTO @CurrentDirectories (ID, DirectoryPath, CreateCompleted, CleanupCompleted)
SELECT ROW_NUMBER() OVER (ORDER BY ID), DirectoryPath + CASE WHEN RIGHT(DirectoryPath,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END, 0, 0
FROM @Directories
ORDER BY ID ASC
SET @CurrentFileNumber = 0
SET @CurrentMirrorFilePath = NULL
WHILE @CurrentFileNumber < @NumberOfFiles
BEGIN
SET @CurrentFileNumber = @CurrentFileNumber + 1
SELECT @CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE @CurrentFileNumber >= (ID - 1) * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories) + 1
AND @CurrentFileNumber <= ID * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories)
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
IF @CurrentFileNumber = 1 AND LEN(@MirrorDirectory) > 0
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
END
INSERT INTO @CurrentFiles (CurrentFilePath)
SELECT @CurrentFilePath
SET @CurrentDirectoryPath = NULL
SET @CurrentFilePath = NULL
END
-- Create directory
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CreateCompleted = 0
ORDER BY ID ASC
SET @CurrentCommandType01 = 'xp_create_subdir'
SET @CurrentCommand01 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_create_subdir N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''' IF @ReturnCode <> 0 RAISERROR(''Error creating directory.'', 16, 1)'
EXECUTE @CurrentCommandOutput01 = [dbo].[CommandExecute] @Command = @CurrentCommand01, @CommandType = @CurrentCommandType01, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput01 = @Error
IF @CurrentCommandOutput01 <> 0 SET @ReturnCode = @CurrentCommandOutput01
UPDATE @CurrentDirectories
SET CreateCompleted = 1,
CreateOutput = @CurrentCommandOutput01
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand01 = NULL
SET @CurrentCommandOutput01 = NULL
SET @CurrentCommandType01 = NULL
END
-- Perform a backup
IF NOT EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateOutput <> 0 OR CreateOutput IS NULL)
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP_DATABASE'
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP_LOG'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @Compress = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION'
IF @Compress = 'N' AND @Version >= 10 SET @CurrentCommand02 = @CurrentCommand02 + ', NO_COMPRESSION'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'xp_backup_database'
WHEN @CurrentBackupType = 'LOG' THEN 'xp_backup_log'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_database @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
WHEN @CurrentBackupType = 'LOG' THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_log @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
END
SELECT @CurrentCommand02 = @CurrentCommand02 + ', @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
SET @CurrentCommand02 = @CurrentCommand02 + ''''
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @read_write_filegroups = 1'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CAST(@CompressionLevel AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @buffercount = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @maxtransfersize = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Throttle IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @throttle = ' + CAST(@Throttle AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @cryptlevel = ' + CASE
WHEN @EncryptionType = 'RC2-40' THEN '0'
WHEN @EncryptionType = 'RC2-56' THEN '1'
WHEN @EncryptionType = 'RC2-112' THEN '2'
WHEN @EncryptionType = 'RC2-128' THEN '3'
WHEN @EncryptionType = '3DES-168' THEN '4'
WHEN @EncryptionType = 'RC4-128' THEN '5'
WHEN @EncryptionType = 'AES-128' THEN '6'
WHEN @EncryptionType = 'AES-192' THEN '7'
WHEN @EncryptionType = 'AES-256' THEN '8'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType02 = 'sqlbackup'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION = ' + CAST(@CompressionLevel AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', THREADCOUNT = ' + CAST(@Threads AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', KEYSIZE = ' + CASE
WHEN @EncryptionType = 'AES-128' THEN '128'
WHEN @EncryptionType = 'AES-256' THEN '256'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand02,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType02 = 'BACKUP_DATABASE'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType02 = 'xp_ss_backup'
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_backup @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand02 = @CurrentCommand02 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
IF @CurrentMirrorFilePath IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @mirrorfile = N''' + @CurrentMirrorFilePath + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ', @backuptype = ' + CASE WHEN @CurrentBackupType = 'FULL' THEN '''Full''' WHEN @CurrentBackupType = 'DIFF' THEN '''Differential''' WHEN @CurrentBackupType = 'LOG' THEN '''Log''' END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @readwritefilegroups = 1'
SET @CurrentCommand02 = @CurrentCommand02 + ', @checksum = ' + CASE WHEN @CheckSum = 'Y' THEN '1' WHEN @CheckSum = 'N' THEN '0' END
SET @CurrentCommand02 = @CurrentCommand02 + ', @copyonly = ' + CASE WHEN @CopyOnly = 'Y' THEN '1' WHEN @CopyOnly = 'N' THEN '0' END
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CASE WHEN @CompressionLevel = 5 THEN N'ispeed' WHEN @CompressionLevel = 6 THEN N'isize' ELSE CAST(@CompressionLevel AS nvarchar) END
IF @RetryWrites IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @retrywrites = N''' + @RetryWrites + ''''
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptiontype = N''' + CASE
WHEN @EncryptionType = 'AES-128' THEN 'AES128'
WHEN @EncryptionType = 'AES-256' THEN 'AES256'
END + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptedbackuppassword = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput02 = [dbo].[CommandExecute] @Command = @CurrentCommand02, @CommandType = @CurrentCommandType02, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput02 = @Error
IF @CurrentCommandOutput02 <> 0 SET @ReturnCode = @CurrentCommandOutput02
END
-- Verify the backup
IF @CurrentCommandOutput02 = 0 AND @Verify = 'Y'
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType03 = 'xp_restore_verifyonly'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_restore_verifyonly'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
SET @CurrentCommand03 = @CurrentCommand03 + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType03 = 'sqlbackup'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand03,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType03 = 'xp_ss_verify'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_verify @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand03 = @CurrentCommand03 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput03 = [dbo].[CommandExecute] @Command = @CurrentCommand03, @CommandType = @CurrentCommandType03, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput03 = @Error
IF @CurrentCommandOutput03 <> 0 SET @ReturnCode = @CurrentCommandOutput03
END
-- Delete old backup files
IF (@CurrentCommandOutput02 = 0 AND @Verify = 'N' AND @CurrentCleanupDate IS NOT NULL)
OR (@CurrentCommandOutput02 = 0 AND @Verify = 'Y' AND @CurrentCommandOutput03 = 0 AND @CurrentCleanupDate IS NOT NULL)
BEGIN
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CleanupCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CleanupCompleted = 0
ORDER BY ID ASC
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType04 = 'xp_slssqlmaint'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_slssqlmaint N''-MAINTDEL -DELFOLDER "' + REPLACE(@CurrentDirectoryPath,'''','''''') + '" -DELEXTENSION "' + @CurrentFileExtension + '" -DELUNIT "' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + '" -DELUNITTYPE "minutes" -DELUSEAGE'' IF @ReturnCode <> 0 RAISERROR(''Error deleting LiteSpeed backup files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType04 = 'sqbutility'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqbutility 1032, N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''', N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + CASE WHEN @CurrentBackupType = 'FULL' THEN 'D' WHEN @CurrentBackupType = 'DIFF' THEN 'I' WHEN @CurrentBackupType = 'LOG' THEN 'L' END + ''', ''' + CAST(DATEDIFF(hh,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'h'', ' + ISNULL('''' + REPLACE(@EncryptionKey,'''','''''') + '''','NULL') + ' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLBackup backup files.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType04 = 'xp_ss_delete'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_delete @filename = N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + '\*.' + @CurrentFileExtension + ''', @age = ''' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'Minutes'' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLsafe backup files.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput04 = [dbo].[CommandExecute] @Command = @CurrentCommand04, @CommandType = @CurrentCommandType04, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput04 = @Error
IF @CurrentCommandOutput04 <> 0 SET @ReturnCode = @CurrentCommandOutput04
UPDATE @CurrentDirectories
SET CleanupCompleted = 1,
CleanupOutput = @CurrentCommandOutput04
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand04 = NULL
SET @CurrentCommandOutput04 = NULL
SET @CurrentCommandType04 = NULL
END
END
END
-- Update that the database is completed
UPDATE @tmpDatabases
SET Completed = 1
WHERE Selected = 1
AND Completed = 0
AND ID = @CurrentDBID
-- Clear variables
SET @CurrentDBID = NULL
SET @CurrentDatabaseID = NULL
SET @CurrentDatabaseName = NULL
SET @CurrentBackupType = NULL
SET @CurrentFileExtension = NULL
SET @CurrentFileNumber = NULL
SET @CurrentDifferentialBaseLSN = NULL
SET @CurrentDifferentialBaseIsSnapshot = NULL
SET @CurrentLogLSN = NULL
SET @CurrentLatestBackup = NULL
SET @CurrentDatabaseNameFS = NULL
SET @CurrentDatabaseType = NULL
SET @CurrentDate = NULL
SET @CurrentCleanupDate = NULL
SET @CurrentIsDatabaseAccessible = NULL
SET @CurrentAvailabilityGroup = NULL
SET @CurrentAvailabilityGroupRole = NULL
SET @CurrentIsPreferredBackupReplica = NULL
SET @CurrentDatabaseMirroringRole = NULL
SET @CurrentLogShippingRole = NULL
SET @CurrentCommand02 = NULL
SET @CurrentCommand03 = NULL
SET @CurrentCommandOutput02 = NULL
SET @CurrentCommandOutput03 = NULL
SET @CurrentCommandType02 = NULL
SET @CurrentCommandType03 = NULL
DELETE FROM @CurrentDirectories
DELETE FROM @CurrentFiles
END
--// Log completing information //--
Logging:
SET @EndMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120)
SET @EndMessage = REPLACE(@EndMessage,'%','%%')
RAISERROR(@EndMessage,10,1) WITH NOWAIT
IF @ReturnCode <> 0
BEGIN
RETURN @ReturnCode
END
END
GO
ALTER AUTHORIZATION ON [dbo].[DatabaseBackup] TO SCHEMA OWNER
GO
Diane

HT1925 My ipod is not showing up when I have itunes up. I was told to remove itunes and reinstall however. I receive a message with unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-

can someone please advise on what I should do? unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-4953-92FA-624BDF5D 85AB) VEIFY THAT YOU HAVE SUFFICIENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL, Which i did . I contacted the apple support and they could not help. has anyone gotten this error? Did some research some results show that this has occurred during updates on the itunes but has not seen how to successfully uninstall without getting this error. I attempted to use the control panel and uninstall but it provides me with the same error all the time. I NEED SOME Answers on this issue. Can you please help?!

Perhaps try the fixit from the following Microsoft web page. (Try the "problems uninstalling" option.)
Fix problems with programs that can't be installed or uninstalled

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

Ship to state is not avilable in the DTW Templet

Similar Messages

Maybe you are looking for