Short dump when exporting to Excel

After installing SAP Gui 7.20, I get a short dump (Message_Type_x) whenever exporting a report to Excel (XXL).   
SAP Gui 7.20
Patch level 5
Windows 7
Office 2010
has anybody run into this issue or know how to resolve it?   Thank you.

Hy,
I've the same problem, have you resolve it?
By,
Ale.

Similar Messages

  • Short Dump when downloading to EXCEL from ALV

    Hi,
    I have an ALV grid display program. The data in the grid is displayed correctly. But when trying to download the data to excel it gives a short dump.
    Assignment error: Overwriting a protected field.
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLKKBL" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    Some times it allows to download the data, but sometimes it gives short dump.
    Thanks,
    Deepthi

    This is my part of the code:
      i_fieldcat-key     = gc_x.
      i_fieldcat-no_zero = gc_x.
      i_fieldcat-fix_column  = 'X'.
      i_fieldcat-hotspot = gc_x.
      perform bild_fieldcat using
        '' 'AUFNR' 'GT_REPORT ' ' '  'CAUFV'  ' '  'C' '12' ' '.
      perform bild_fieldcat using
        '' 'DISGR' 'GT_REPORT ' ' '  'MARC' ' '  'C' '4' ' '.
      perform bild_fieldcat using
        '' 'AUART' 'GT_REPORT ' ' '  'CAUFV' ' '  'C' '04' ' '.
      perform bild_fieldcat using
        '' 'DISPO' 'GT_REPORT ' ' '  'CAUFV' ' ' 'C' '06' ' '.
      i_fieldcat-no_zero = gc_x.
      perform bild_fieldcat using
        '' 'MATNR' 'GT_REPORT ' ' '  'MARA' ' '  'C' '18' ' '.
      i_fieldcat-no_zero = gc_x.
      perform bild_fieldcat using
        '' 'CHARG' 'GT_REPORT ' ' '  'MDFA' ' ' 'C' '14' ' ' .
    *begin insert RCHALASA
      i_fieldcat-no_zero = gc_x.
      i_fieldcat-fix_column  = 'X'.
      perform bild_fieldcat using
        '' 'FTRMI' 'GT_REPORT ' ' '  'CAUFV' ' ' 'D' '08' ' '.
    *end insert
      i_fieldcat-no_zero = gc_x.
      i_fieldcat-fix_column  = 'X'.
      perform bild_fieldcat using
        '' 'GLTRP' 'GT_REPORT ' ' '  'CAUFV'  ' '  'D' '10' ' '.
      i_fieldcat-no_zero = gc_x.
      perform bild_fieldcat using
        '' 'GLTRS' 'GT_REPORT' ' '  'CAUFV' ' ' 'D' '10' ' '.
      perform bild_fieldcat using
        '' 'GSTRP' 'GT_REPORT' ' '  'CAUFV' ' '  'D' '10' ' '.
      perform bild_fieldcat using
        '' 'AGE' 'GT_REPORT' ' '  ' ' 'Age'  'C' '08' ' '.
      i_fieldcat-no_zero = gc_x.
    i_fieldcat-do_sum  = gc_x.
      i_fieldcat-fix_column  = 'X'.
      perform assign_alv_qty_format.
      perform bild_fieldcat using
        '' 'GAMNG' 'GT_REPORT' ' '  ' '  'Order Qty'  'QUAN' '09' ' '.
      perform bild_fieldcat using
        '' 'STK_PROD_FLAG' 'GT_REPORT' ' '   ' '  'Stk/Prod'  'C' '06' ' '.
      i_fieldcat-no_zero = gc_x.
    i_fieldcat-do_sum  = gc_x.
      i_fieldcat-fix_column  = 'X'.
      perform assign_alv_qty_format.
      perform bild_fieldcat using
        '' 'IGMNG' 'GT_REPORT' ' '  ' ' 'Order Yield Qty' 'QUAN' '11' ' '.
      i_fieldcat-no_zero = gc_x.
    i_fieldcat-do_sum  = gc_x.
      i_fieldcat-fix_column  = 'X'.
      perform assign_alv_qty_format.
      perform bild_fieldcat using
        '' 'IASMG' 'GT_REPORT' ' ' ' ' 'Order Scrap Qty'  'QUAN' '11' ' '.
    **begin insert RCHALASA
      perform bild_fieldcat using
         '' 'YIELD_PER' 'GT_REPORT' ' ' ' ' 'Yield'  'C' '05' ' '.
    **end insert
    DATA: col_pos like sy-colno.
    col_pos = '17'.
      loop at gt_oper.
        gv_tabix = sy-tabix.
        i_fieldcat-no_zero = gc_x.
        i_fieldcat-do_sum  = gc_x.
        i_fieldcat-fix_column  = 'X'.
       col_pos = col_pos + 1.
        perform assign_alv_qty_format.
        gv_yield6(03) = gt_oper-vornr1(03).
    *begin insert RCHALASA
        move gt_oper-ltxa1 to gv_text.
      translate gv_text to upper case.
    gv_text = gv_yield.
    *end insert
        gv_tabixn = gv_tabix.
        gv_yield+6(03) = gv_tabixn.
        gv_fieldname = gv_yield.
        translate gv_fieldname to upper case.
        perform bild_fieldcat using
         '' gv_fieldname 'GT_REPORT' ' ' ' ' gv_text  'QUAN' '04' ' '.
       perform assign_alv_qty_format.
      gv_scrap6(03) = gt_oper-vornr1(03).
      select single
             grdtx
             from trugt
             into gv_text1
             where
             grund = gt_oper-vornr
             and werks in s_werks.
       gv_text = gv_scrap.
       i_fieldcat-no_zero = gc_x.
       gv_tabixn = gv_tabix.
      gv_scrap+6(03) = gv_tabixn.
       gv_fieldname = gv_scrap.
       translate gv_fieldname to upper case.
       perform bild_fieldcat using
         gv_fieldname 'GT_REPORT' ' ' gv_text1 'X' 'QUAN' '08' ' '.
       clear gv_text1.
      endloop.  " GT_OPER
      DATA: count type c.
      DESCRIBE table gt_grund lines count.
      loop at gt_grund into gl_grund.
        gv_tabix = sy-tabix.
        i_fieldcat-no_zero = gc_x.
        i_fieldcat-do_sum  = gc_x.
        i_fieldcat-fix_column  = 'X'.
        perform assign_alv_qty_format.
        if gl_grund-grund is initial.
          gl_grund = 'NONE'.
          gv_text = gl_grund.
        else.
           gv_text = gl_grund-grdtx.
        endif.
        gv_tabixn = gv_tabix.
        gv_scrap_code+11(03) = gv_tabixn.
        gv_fieldname = gv_scrap_code.
        translate gv_fieldname to upper case.
       col_pos = col_pos + 1.
        perform bild_fieldcat using
          '' gv_fieldname 'GT_REPORT' 'XMNGA' 'AFRU'  gv_text  'QUAN' '12' ' ' .
      endloop.  " GT_OPER
      gb_layout-zebra = 'X'.
      gb_print-no_print_listinfos = 'X'.
      gb_variant-variant = p_varia.
      perform create_events using gt_events[].
      call function 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
          text = 'Reading SAP Records.......'(600).
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program       = gv_repid
                i_callback_top_of_page   = 'TOP_OF_PAGE'
               i_callback_pf_status_set = 'SET_STATUS'
                i_callback_user_command  = 'CALL_UP_SAP_TRANS'
                it_fieldcat              = i_fieldcat[]
                is_layout                = gb_layout
                i_grid_title             = gb_title
                i_default                = 'X'
                i_save                   = 'X'
                is_variant               = gb_variant
                is_print                 = gb_print
                it_events                = gt_events[]
           tables
                t_outtab                 = gt_report
           exceptions
                program_error            = 1
                others                   = 2.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    ***********ALV SUBROUTINE**************
    TYPE-POOLS: slis.
    DATA: gv_repid            LIKE sy-repid.
    DATA: i_fieldcat          TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    DATA: gb_layout           TYPE slis_layout_alv.
    DATA: gb_selfield         TYPE slis_selfield.
    DATA: gb_print            TYPE slis_print_alv.
    DATA: i_sort              TYPE  slis_t_sortinfo_alv WITH HEADER LINE.
    DATA: gv_keyinfo          TYPE SLIS_KEYINFO_ALV.
    DATA: gb_variant          LIKE disvariant,
          gb_def_variant      LIKE disvariant.
    DATA: gb_title(70).
    DATA: gt_events           TYPE slis_t_event,
          gt_sort             TYPE SLIS_T_SORTINFO_ALV,
          gt_list_top_of_page TYPE slis_t_listheader,
          g_status_set        TYPE slis_formname VALUE 'PF_STATUS_SET',
          g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
          g_top_of_page       TYPE slis_formname VALUE 'TOP_OF_PAGE',
          g_end_of_page       TYPE slis_formname VALUE 'END_OF_PAGE',
          g_top_of_list       TYPE slis_formname VALUE 'TOP_OF_LIST',
          g_end_of_list       TYPE slis_formname VALUE 'END_OF_LIST'.
    DATA: it_event_exit TYPE slis_t_event_exit WITH HEADER LINE.
    *--- Rotinas ---
    FORM alv_init.
      CLEAR: gb_variant.
      gv_repid = sy-repid.
      gb_variant-report = gv_repid.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
           EXPORTING
                i_save     = 'A'
           CHANGING
                cs_variant = gb_variant
           EXCEPTIONS
                not_found  = 2.
      IF sy-subrc = 0.
        p_varia = gb_variant-variant.
      ENDIF.
    ENDFORM.                    " ALV_INIT
    FORM alv_f4.
      gb_variant-report = gv_repid.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
           EXPORTING
                is_variant = gb_variant
                i_save     = 'A'
           IMPORTING
                es_variant = gb_variant
           EXCEPTIONS
                not_found  = 2.
      IF sy-subrc = 2.
        MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        p_varia = gb_variant-variant.
      ENDIF.
    ENDFORM.                                                    " ALV_F4
    FORM bild_fieldcat USING x_pos x_field x_tab x_reffld x_ref x_text x_type x_tam x_sym.
      i_fieldcat-col_pos       = x_pos.
      i_fieldcat-fieldname     = x_field.
      i_fieldcat-tabname       = x_tab.
      i_fieldcat-ref_fieldname = x_reffld.
      i_fieldcat-ref_tabname   = x_ref.
      i_fieldcat-seltext_l     = x_text.
      i_fieldcat-seltext_m     = x_text.
      i_fieldcat-seltext_s     = x_text.
      i_fieldcat-ddictxt  = 'M'   .
      i_fieldcat-inttype       = x_type.
      i_fieldcat-outputlen     = x_tam.
      i_fieldcat-symbol        = x_sym.
      APPEND i_fieldcat.
      CLEAR  i_fieldcat.
    ENDFORM.                    " BILD_FIELDCAT
    FORM create_events USING rt_events TYPE slis_t_event.
      DATA: ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
           EXPORTING
                i_list_type = 0
           IMPORTING
                et_events   = rt_events.
      READ TABLE rt_events WITH KEY name = slis_ev_top_of_page
                               INTO ls_event.
      IF sy-subrc = 0.
        MOVE g_top_of_page TO ls_event-form.
        APPEND ls_event TO rt_events.
      ENDIF.
    ENDFORM.                    "

  • Short dump when exporting to local file in ALV

    I have a report that generates the output fine. When i try to export the output  to a local file from the ALV output- it goes to dump.
    The dump message is "Field symbol has not yet been assigned."
    The program name is saplkkbl but exporting the ALV output works fine with the other programs. so, i guess there is no problem with the standard program.
    Suggestions plz

    Yes, The problem with the standrad program. I think there is a need to apply some patch. you just try this with some other server (if avail) i hope it works.

  • Short dump when exporting the ALV grid report in to spread sheet

    HI,
    I am facing a problem when downloading ALV grid report in to spread sheet LIST>EXPORT>LOCAL FILE -->SPREADSHEET.
    in shotdump the cursor shows : "assign cline+cbegin(clength) to <field_cont>."
    In SAP internal table LIST,in the first record the value of the filed LENG is 0. when i have changed this value ex:10 etc it is coming properly.
    Kindly help me
    Nagendra

    Is this a standard SAP report, or your own? Can you tell what your report does, if it is a custom ALV report?

  • Header of ALV with space when exported to excel using Standard ALV

    Hi,
    I am Using Reuse alv grid display    to dispaly my report and it works fine and I am using the standard SAP application tool to export it to excel.
    But for some of the header fields I am getting space in the excel sheet but there is no space while displaying through ALV.
    I am using the following field catalog for the same.
    wa_fieldcat-col_pos = 10.
      wa_fieldcat-fieldname = 'SOLLWERT'.
      wa_fieldcat-seltext_l  = 'text-t10'.      "Target value (* this has no space here)
      wa_fieldcat-outputlen = 32.
    wa_fieldcat-colwidth_optimize = 'X'.
      APPEND wa_fieldcat to it_fieldcat.
    but there are still space for this Colomn when exported to excel if after optimizing the column.
    kindly suggest what field needs to be passed to the field catalogoe to avoid spaces in excel for the header.
    Thanks
    Ritesh

    hey all,
    Thanks everyone for the reply.
    I am using the foloowing field cat:
    l_col_pos = l_col_pos + 1.
        wa_fieldcat-col_pos = l_col_pos.
        wa_fieldcat-outputlen = 32.            
         wa_fieldcat-fieldname = 'SOLLWERT'.
         wa_fieldcat-inttype   = 'P'.             
    *    wa_fieldcat-tabname = 'i_final'.      
        wa_fieldcat-seltext_l = text-t11.         "Target Value
        APPEND wa_fieldcat TO i_fieldcat.
        CLEAR wa_fieldcat.
    I have use this also in the field cat but stil i get space in the excel header.
    wa_fieldcat-REF_FIELDNAME = 'SOLLWERT'.
    *    wa_fieldcat-REF_TABNAME =  'QAMV'.
    Also the space comes with the descrip[tion in the cell of excel.
    its like [space Target Value] and i dont need this Space.
    I have also used  wa_layout-colwidth_optimize = 'X'. but it doesnt wrk.
    Please suggest

  • Short Dump when the Bex-Report scheduled for Broadcast

    Hi Guru's
    I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
    Thanks
    Navin
    Note
    The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
    The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: INTERNAL_ERROR of program SAPLSDCL
    Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
    Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
    Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
    Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
    Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
    Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
    Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
    Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
    Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

    HI Navin,
    Check the short dump analysis in T-code ST22.
    and also check the Information Broadcast Settings / Configuration
    Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
    Regards
    Daya Sagar

  • Formatting lost when exported to excel

    When I export a worksheet results to excel the formatting is being lost like in my worksheet I wanted a line and space for every grouped item which is lost in excel sheet. Is there a way get around for this ?
    Thanks

    Not exactly sure what formatting you're having a problem with, but I'll list some of the points I can think of, of exporting to Excel and will hopefully cover it. I believe you may be referring to point 1 below, but just in case ...
    1. If you have group sort on for a column or more, then when exported to Excel, you won't have those 'blank' values for the column(s) that's grouped. That's why when you know someone will be exporting to Excel, it's a pain as all group sorts are usually taken back off (which can screw up exactly what you're trying to point out in the workbook).
    2. If you have a page -> item (ie: lots of values you pull down like a LOV), then I believe, that you won't get an Excel worksheet for each value in the LOV but only for the one currently displayed when you performed the File -> Export.
    3. When you export to Excel, you only get actual values, no functions of how it was calculated (ie: it'll be static, not dynamic).
    4. You can export to Excel using Plus and might not get the formatting characteristics you want in Excel. I've seen users specifically bring up Viewer just to get the formatting characteristics (colors, fonts, etc.) when they export from that Disco version.
    5. Sometimes when you export from Disco to Excel, that actual value that gets posted in Excel is different. I know ... it sounds wierd, but it's a fact. The problem is NOT Disco, but is a problem with Windows and a setting has to be altered (although I'd have to hunt what that setting is now though). However, I've only seen this happen a few times, so definitely not the norm.
    Russ

  • SSRS 2012 Conditional Formatting Color Issues When Exporting to Excel

    Hi all,
    We recently upgraded to SQL 2012 from SQL2008 R2. I'm having a strange issue with SSRS2012.
    One of the report has conditional formattings on cell background colors. Everything works fine when render the report in browser or preview mode. However, the conditional formatting stop working when export the report to Excel (no issues if
    export to pdf). All cells are high-lightened with pre-defined color although it should only high-lighten those cells that fulfil the condition.
    Has someone encountered this issue before ? Thanks for any help.

    Hi ZZ02,
    I have test the scenario in my testing environment, however, everything goes well when exporting to Excel format. The issue might be related to the expression for the conditional background color. To make further analysis, please post the expression as well
    as the report design structure.
    Additionally, in SQL Server 2012 Reporting Services, the Excel rendering extension renders a report to the native format of Microsoft Excel 2007-2010, the format of which is ExcelOpenXML. By default, the previous version of the Excel rendering extension,
    compatible with Microsoft Excel 2003, is disabled. At this time, I suggest that you enable the Excel 2003 rendering extension by modifying the RSReportServer.config file. After that, the Excel 2003 rendering format will be available on report manager (not
    available in Report Designer). So, please export the report from report manager and check the result again.
    For more information about enable the Excel 2003 rendering extension, please see:
    http://social.msdn.microsoft.com/Forums/en/sqlreportingservices/thread/0713de27-dcc0-4e51-81ac-5272647d171f
    Regards,
    Mike Yin
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here. 
    Mike Yin
    TechNet Community Support

  • Crystal Report 2008 doesn't set  page size when export to excel file

    Hi,
    I am using Crystal Report 2008 Developer edition.
    At Crystal report design time setting the below page setup:
    Page Options -
       to A3(297X420 mm)
    Orientation --- Landscape
    and using the following code in .net (c#)
    I am using below format options to export in excel in .net 2005
    ReportDocument oReport = new ReportDocument();
    oReport.FormatEngine.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
    oReport.FormatEngine.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperA3;
    if (aParamlist.ReportFormat == ReportFormatEnum.MicrosoftExcel)
    ExcelFormatOptions excel = new ExcelFormatOptions();
    excel.ExcelUseConstantColumnWidth = false;
    // Use detail section one as a guideline to determine column width
    excel.ExcelAreaGroupNumber = 1;
    //excel.ExcelAreaType = AreaSectionKind.Detail;
    excel.ExcelAreaType = AreaSectionKind.Detail;
    // Prepare exporting options
    ExportOptions export = oReport.ExportOptions;
    export.FormatOptions = excel;
    export.ExportFormatType = ExportFormatType.Excel;
    oReport.Export();
    when export to excel it doesn't set the Paper Size to  A3(297X420 mm).
    Is there any way to set the paper size while export to excel or in other formats also????
    Thanks & Regds,

    Hi,
    thanks for your email.
    This is not happening in development environment.It is setting the paper size anf paper orientation properly.
    this is happening in the production environment where only redist installation is done.
    thanks

  • Facing short dumps when trying to open session in CSA

    Hi
    All am facing Short dump when i am trying to open session in CSA
    Error detials:
    go to System Administration workcenter  task management up CSA. Choose the Solution
    got short dump:
    Short text
        Length error occurred in IMPORT statement.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
         not caught in
        procedure "LOAD" "(METHOD)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        During import the system discovered that the target object has
        a different length than the object to be imported.
    Missing RAISING Clause in Interface
        Program                                 SAPLDSVAS_PROC
        Include                                 LDSVAS_PROCTAI
        Row                                     1.431
        Module type                             (METHOD)
        Module Name                             LOAD
    Trigger Location of Exception
        Program                                 SAPLDSVAS_PROC
        Include                                 LDSVAS_PROCTAI
        Row                                     1.514
        Module type                             (METHOD)
        Module Name                             LOAD
    Please help me to solve this problem
    Regards,
    Neni

    Hello Neni
    According to the information I saw in that post it could be caused by a sort of inconsistency of the program code vs a structure.
    Wether that is a bug that is in your SAP Solution Manager release or something that is caused by administrative actions (perhaps solving SPAU entries after SP stack update or upgrade) I cannot tell.
    I would recommend you either try and find a relative SAP note (narrowing down result to only your SAP Solution Manager system) and searching using the dump keywords. If you cannot find anything I would recommend you to open a customer message so SAP can take a look at the specific error.
    If you give more information, perhaps someone on the forum can help you out abit better, which SAP Solution Manager version and so on.
    You also didn't answer my question, any recent changes you are aware of ?
    Kind regards
    Tom

  • Does not display axis label in graph when exported to excel

    I have a wierd issue.I have a report with graph with coloum chart and axis labels description on x axis.WHen i export the report to PDF everything looks OK.But when i export it to excel few axis labels disapper.Out of 12 labels only 2 apper when exported to excel.Has anyone encountered this issue.
    If so is there a way to fix this.
    PS: I am using BO XI 3.1 Webi.
    Thank you,
    Sanjeev

    hi,
    I have tried this out with a sample.
    In WEBI preview mode and PDF, all axis labels will appear fine.
    But when exported to excel, some labels will disappear.
    Workaround: We have to increase the chart size in Excel till all axis labels appear clearly.
    Regards,
    Vamsee

  • Prblm in Date format when exported to excel

    Hi ,
    I had a problem when using the Export To Excel option from Portal. The data is getting fine populated in Excel but it's in General No Specific Format. But I wanted the data to be in its original format even when exported to Excel. Like...
    Country -
    Date Goods Delivered
    India----
    01.01.2001
    America----
    05.12.2004
    Singapore----
    12.04.2003
    Here the country should be of type TEXT FORMAT and Date Goods Delivered should be in DATE FORMAT(Here its visible as date but it's in General format)
    I am facing problem with date, it is displayed(01.04.2006) as shown above but it's in general format. I wanted it to be in date format at excel.
    I am in BW3.5 with portal version EP7.0
    Please suggest the solution and I had even gone through previous forum questions related to this but couldn't get.....the solution.
    points will be assigned...
    Regards,
    rudra.

    Hi,
    My end users requirement is to get all data in Standard format. We can't ask to select the date column and change the format in excel as there are more date fields(columns ).
    Using macro i had one problem,even though i am not sure..
    i can't enable the macro to get enabled in page load of export to excel as it is to be done at users end...
    If theres any possibilty of enabling....pls let me know
    Thanks for your valuable suggestions...
    Regards,
    rudra.

  • Reports output delayed when exported to Excel using OLE2

    Hi All,
    Platform - Oracle Application Server 10g Release 2 10.1.2.3 on Windows 32 bit.
    The report output is getting generated in a minute when exported to PDF i.e destype=cache & desformat=pdf. When we generate the output to excel is considerably delayed. It is taking time and internal server error is occuring.
    1) Report developed with simple query
    2) Used RPT2XLS procedure which uses OLE2 builtin to export report output into excel.
    3) Called RPT2XLS.run procedure in After-Report trigger of the report.
    4) We have relased all memory objects in the RPT2XLS package after exporting data and there is no EXCEL.exe running once the file is generated.
    System parameters used in the URL.
    . destype=file
    desformat=pdf
    CONTAINSOLE=yes (Required for exporting OLE2 objects into Excel in report)
    desname=path & name of the file.
    I have gone through the tuning documents for reports server and increased minengine, maxengine and initengine parameters of the reports engine and also changed maxconnect and IdleTimeout parameters in reports server configuration file.
    What might be the reason for delaying in the output of the reports when exported to Excel. Can the guys with special knowledge on this area help us in getting out of this issue.
    Thanks in advance.

    hey all,
    Thanks everyone for the reply.
    I am using the foloowing field cat:
    l_col_pos = l_col_pos + 1.
        wa_fieldcat-col_pos = l_col_pos.
        wa_fieldcat-outputlen = 32.            
         wa_fieldcat-fieldname = 'SOLLWERT'.
         wa_fieldcat-inttype   = 'P'.             
    *    wa_fieldcat-tabname = 'i_final'.      
        wa_fieldcat-seltext_l = text-t11.         "Target Value
        APPEND wa_fieldcat TO i_fieldcat.
        CLEAR wa_fieldcat.
    I have use this also in the field cat but stil i get space in the excel header.
    wa_fieldcat-REF_FIELDNAME = 'SOLLWERT'.
    *    wa_fieldcat-REF_TABNAME =  'QAMV'.
    Also the space comes with the descrip[tion in the cell of excel.
    its like [space Target Value] and i dont need this Space.
    I have also used  wa_layout-colwidth_optimize = 'X'. but it doesnt wrk.
    Please suggest

  • BOBI 4.x Webi - Graphs when exported to Excel, turns as picture.

    Hello,
    In SAP BO XI 3.x version, a Webi document having graphs, when exported to Excel sheet, the graphs are exported as they are and were able to modify them. However, in SAP BO BI 4.x version, the graphs are exported as picture and are not able modify them.
    I tried with multiple 4.x versions even with 4.1 SP4, but its still the same.
    Is this by design that the Chart\Graph engine saves them as picture in 4.x or there are some settings that need to be done?
    Any help is much appreciated.
    Regards,
    Abhay

    Hello Abhay,
    As you suspected, the functionality to add webi chart as excel chart while exporting has been changed in BO 4.x version. Please see below idea page where developers like us asking to restore the same functionality. The idea is under review now. Cast a vote for the idea.
    https://ideas.sap.com/ct/ct_a_view_idea.bix?c=1DA84A30-1E5A-43FA-95C5-857A8B99D197&idea_id=8F863F84-DFCB-48EF-B79B-348CCBC6D695
    Regards,
    Nikhil Joy

  • Short Dump when trying to open C-project due to status

    Hi,
    We have a daily batch job in CRM that reports all the project ID's and
    sends e-mails out to recipients.
    As part of this report it retrieves the statuses for the project ID's,
    however the report short dumps when retrieving the status for one of
    the projects because it is not finding an active status.
    When we try and open the project in C-projects we get the same short
    dump error: CX_DPR_FATAL_ERROR so we cannot view or update the status.
    When we investigate this issue we find that in table CRM_JCDS there are
    3 entries for this project ID. One of the statuses is inactive (I1703)
    but there is another status that is active (I1701). The two status
    entries were created at exactly the same date and time and by the same
    user.
    In table CRM_JEST there is only one entry shown which shows an inactive
    status and we believe this to be the wrong status. Please can you
    advise if this status conflict is causing the problem and also how to
    resolve this issue?

    Hi Paul,
    generally, the project and its elements must have an active status in table CRM_JEST, however, at this point it is not clear how this inconsistency arised. There is no SAP standard report or a 'generally valid' solution that could solve this issue, however, I found a customer message that you have opened in September with exactly the same problem. A colleague from the development team already provided you with a correction report, but there was no feedback from your side if it helped or not.
    It is very difficult to provide help as inconsistencies can have several different causes, so the best would be to have this checked in a customer message with an example.
    Regards,
    Silvia

Maybe you are looking for