Short dump when exporting to local file in ALV

I have a report that generates the output fine. When i try to export the output to a local file from the ALV output- it goes to dump.
The dump message is "Field symbol has not yet been assigned."
The program name is saplkkbl but exporting the ALV output works fine with the other programs. so, i guess there is no problem with the standard program.
Suggestions plz

Yes, The problem with the standrad program. I think there is a need to apply some patch. you just try this with some other server (if avail) i hope it works.

Similar Messages

Missing lines when exporting to local file

I've recently created a query in SQ01 which pulls out sales order information and uses a data reading program to display the texts.
The query works absolutely fine and shows all the data required in SAP.
The problem comes however when I export it to Excel using the ALV functionality of Export to Local file - spreadsheet. some of the lines in the middle of the report are missing in the saved excel file despite them being present in SQ01.
However if I use the method of Export to local file - in the clipboard... and paste the data into an excel sheet, all the lines are present.
What could be the cause of this issue? I could use the method of copying to the clipboard but a lot of people use this report and they aren't all comfortable with the copy paste method (because you then have to perform text to columns etc.) so it would be better if I could work out why it's not working in the original way and fix it.

Hi Benjamin,
let me first put in a question.
Why don't you use the direct to excel export?
If there's an issue with the inplace excel, there's an easy work-around for that.
From the alv-grid chose printing preview, when you use the excel button from there, you'll get the popup asking you for format, table type etc. and then rewards you with a (usually) complete and readable excel.
Note, that the download to local file, with spread-sheet option, creates an ascii csv file, with an xls extension. It's not quite an excel file.
It might be exccel and not the export.
Give it a try.
BR - Jörg

Short dump when exporting the ALV grid report in to spread sheet

HI,
I am facing a problem when downloading ALV grid report in to spread sheet LIST>EXPORT>LOCAL FILE -->SPREADSHEET.
in shotdump the cursor shows : "assign cline+cbegin(clength) to <field_cont>."
In SAP internal table LIST,in the first record the value of the filed LENG is 0. when i have changed this value ex:10 etc it is coming properly.
Kindly help me
Nagendra

Is this a standard SAP report, or your own? Can you tell what your report does, if it is a custom ALV report?

Short dump when exporting to Excel

After installing SAP Gui 7.20, I get a short dump (Message_Type_x) whenever exporting a report to Excel (XXL).
SAP Gui 7.20
Patch level 5
Windows 7
Office 2010
has anybody run into this issue or know how to resolve it? Thank you.

Hy,
I've the same problem, have you resolve it?
By,
Ale.

GETWA_NOT_ASSIGNED short dump when load business partner master data

Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.

Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

How to restrict users from printing documents and exporting to local file

Hi SAP gurus,
I have two questions.
1. How can I restrict users from printing a document? i.e. billdoc? I would like to know if I could block it though authorization. If yes, what auth obj to use?
2. How to restrict certain users from exporting to local file? the System> List>Save-->Local File. I have tried restricting it using auth object S_GUI but it seems it is only applicable to older versions of SAP. im on ecc6.
Thank you in advance.

Hi,
Check this:
Create your own gui status and attach it to the list in the event START-OF-SELECTION.
In the menu painter extra -> adjust template.
Make it a list status and you will see all the standard list options appear including list->download
Deactivate the ones you don't want.
If you just want to prevent users from downloading the list you can achieve this with authorization object S_GUI, activity 61. Menu option will still be there though.
Please note that if you remove authorisation for S_GUI activity 61 then all downloads will not be possible.
If you just want to disable downloads only for a particular report, you can try this test program:
Code:
REPORT ztest.
DATA: PROGNAME LIKE SY-CPROG value 'Z_CHECK_AUTH',
        FORMNAME LIKE SY-XFORM value 'F_CHECK_AUTH'.
START-OF-SELECTION.
    CALL FUNCTION 'SET_DOWNLOAD_AUTHORITY'
         EXPORTING
              FORM    = FORMNAME
              PROG    = PROGNAME
         EXCEPTIONS
              OTHERS = 1.
WRITE: / 'TEST'.
You also need this:
Code:
PROGRAM z_check_auth.
FORM f_check_auth USING pe_result TYPE i.
pe_result = 5.
ENDFORM.
Also have a look at the exit SGRPDL00.
Hope this helps you.
Rgds,
Raghu

Facing short dumps when trying to open session in CSA

Hi
All am facing Short dump when i am trying to open session in CSA
Error detials:
go to System Administration workcenter task management up CSA. Choose the Solution
got short dump:
Short text
    Length error occurred in IMPORT statement.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "LOAD" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
Missing RAISING Clause in Interface
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.431
    Module type                             (METHOD)
    Module Name                             LOAD
Trigger Location of Exception
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.514
    Module type                             (METHOD)
    Module Name                             LOAD
Please help me to solve this problem
Regards,
Neni

Hello Neni
According to the information I saw in that post it could be caused by a sort of inconsistency of the program code vs a structure.
Wether that is a bug that is in your SAP Solution Manager release or something that is caused by administrative actions (perhaps solving SPAU entries after SP stack update or upgrade) I cannot tell.
I would recommend you either try and find a relative SAP note (narrowing down result to only your SAP Solution Manager system) and searching using the dump keywords. If you cannot find anything I would recommend you to open a customer message so SAP can take a look at the specific error.
If you give more information, perhaps someone on the forum can help you out abit better, which SAP Solution Manager version and so on.
You also didn't answer my question, any recent changes you are aware of ?
Kind regards
Tom

Short Dump when trying to open C-project due to status

Hi,
We have a daily batch job in CRM that reports all the project ID's and
sends e-mails out to recipients.
As part of this report it retrieves the statuses for the project ID's,
however the report short dumps when retrieving the status for one of
the projects because it is not finding an active status.
When we try and open the project in C-projects we get the same short
dump error: CX_DPR_FATAL_ERROR so we cannot view or update the status.
When we investigate this issue we find that in table CRM_JCDS there are
3 entries for this project ID. One of the statuses is inactive (I1703)
but there is another status that is active (I1701). The two status
entries were created at exactly the same date and time and by the same
user.
In table CRM_JEST there is only one entry shown which shows an inactive
status and we believe this to be the wrong status. Please can you
advise if this status conflict is causing the problem and also how to
resolve this issue?

Hi Paul,
generally, the project and its elements must have an active status in table CRM_JEST, however, at this point it is not clear how this inconsistency arised. There is no SAP standard report or a 'generally valid' solution that could solve this issue, however, I found a customer message that you have opened in September with exactly the same problem. A colleague from the development team already provided you with a correction report, but there was no feedback from your side if it helped or not.
It is very difficult to provide help as inconsistencies can have several different causes, so the best would be to have this checked in a customer message with an example.
Regards,
Silvia

ASSERTION_FAILED short dump when Transporting Transformation from Dev to QA

Hi Experts,
I' am getting a short Dump when transporting the transformations, DSO & DTPs from Dev server to QA.
I got RC=12, Please have a look below....
Transport log...
    BCQ        System BCQ
               Selection for Import                     08.07.2010 15:28:59    (0) Successfully Completed
               Import                                   08.07.2010 15:35:14    (0) Successfully Completed
               Check Versions                           08.07.2010 15:35:14    (0) Successfully Completed
               Method Execution                         08.07.2010 15:36:20   (12) Canceled
               Import                                   08.07.2010 15:45:39    (0) Successfully Completed
               Check Versions                           08.07.2010 15:45:39    (0) Successfully Completed
               Method Execution                         08.07.2010 15:46:45   (12) Canceled
and the Log detalis.....
Date        Time      Message
08.07.2010 15:35:15 Job started
08.07.2010 15:35:15 Step 001 started (program RDDEXECL, variant , user ID DDIC)
08.07.2010 15:35:15 All DB buffers of application server sxcat136 were synchronized
08.07.2010 15:35:21 STDO: Log could not be written on output device T
08.07.2010 15:35:30 Replication completed successfully
08.07.2010 15:35:31 Struttura di comunicazione /BIC/CS8ZFIZIASA activated
08.07.2010 15:35:40 Regola(e) di trasm. 8ZFIZIASA_AA activated
08.07.2010 15:35:47 ABAP/4 processor: ASSERTION_FAILED
08.07.2010 15:35:47 Job cancelled
Even I've checked the entries on the table RSTRANRULE for those Transpormations but there I got...all the entries with...
RULEID = all numbers
GROUPID = '1' or '2'
GROUPTYPE = 'S' or 'T'
REF_RULE ='0'
we are in to SAP_BW Release 700, Level 0013, SP -SAPKW70013, SAP NetWeaver BI 7.0
Pls help if any one know's the solution for this.
Thanks in adv.
BR,
Ajay Kumar
Edited by: sap.ajaykumar on Jul 9, 2010 12:48 PM

Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Also check the oSS note : Note 975675 - Transformation cannot be activated

Short dump when we write more than 4 routines or formulas 4 one source fld

Hi Experts ,
We have one source field in a DSO which supplies data to 9 other characteristics present in the cube via formulas. But the system throws a short dump when we write more than 4 routines or formulas.
Please let us know if there is any restriction in BI 7 as to let only 4 formulas to be written for one source field.
The below is the description of the short dump
RUNTIME ERROR : SAP SQL_ARRAY_INSERT_DUPREC
EXCEPTION : CX_SY_OPEN_SQL_DB
Help done would be assigned points ...
Thanks,
Santosh ...

Hi,
thanks for your input
Rd, rt,re and rs are ranges.
Select ranges
RANGES: rd FOR ZMOBILEDATA-COMPID,
          rs FOR ZMOBILEDATA-SUBSCRIBERS,
          rt FOR ZMOBILEDATA-TURNOVER,
          re FOR ZMOBILEDATA-ENTRYDATE.
thanks'

Short Dump When Installing Key Figure Catalog from BI Content

Hi Friends,
I get a Short dump when trying to Install a Key Figure Catalog (in Purchasing) from the BI content. This is what the Error Says ,
" You Attempted to Use a "NULL" object reference (Points to nothing) access a component (variable : " "). An Object reference must point to an object (an instance of class ) before it can be used to access components.
Any input will be greatly appreciated,

Hi Michal,
this bug hits only patch level 201 of the DBSL. Please update the DBSl.
Regarding the ABAP code I do not believe that the hint helps in this case but it should not cause any problems either. If this hint is applied more PREPARE calls are neccessary since before every execution a new statement text is assembled.
The advantage of SUBSTITUTE_VALUES hints is that the database optimizer get more information through the statement text. The downside is that a new statement is generated every time. E.g. you won't find the statement as a top scorer in a SQL cache analysis if the access plan is still bad.
Regards
Frank

I am using CS6. When exporting layers to files in Scripts, I get an error message Error 519: Server

I am using CS6. When exporting layers to files in Scripts, I get an error message Error 519: Server Interface error. 'No component returned from CreateWidget'

Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.

Short dump when assigning revision to notification (iw22)

Hello!
We have a short dump when we try to assign a revision to a notification in iw22.
The dump occurs when we save after assigning a revision. We have the lollowing message:
Message CO888 : Error when reading order header with index
Include LCOBHIC2, line 39
The OSS note 1101437 doesn't solve our problem.
Can you help me?
Thanks by advance,
Laurent.

I tried your tests.
I haven't a dump neither for the first test nor for the second one.
The dump occurs only when:
- I create a notification
- i create an order and assign it to this notification.
- i save the notification and the order
- i assign a revision to the notifiaction and save
There isn't dump if i assign revision number before the order creation. In fact, the dump only occurs if a assign a revision number after the assignment of the order to the notifiation.
I'm checking user exit.
Thanks,
Laurent.

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

Short dump when exporting to local file in ALV

Similar Messages

Maybe you are looking for