Should I update my great working week 38 to 1.1.1?

Wondering about experiences of other week 38 owners who have fine working iTouch's.
Did you update? If you did, do you notice any differences, either good or bad.
I want to see if it is worthwhile or NECESSARY to do this update on a good working machine.
Cheers
mrjazz
Message was edited by: mrjazz

I updated my great-working week 38 touch and have had no problems. Video still looks fantastic. It's also worth noting that MacWorld posted some sample pics showing the pre and post 1.1.1 update video quality on a touch that had the negative blacks issue, and while the negative part was gone, the screen was still far too dark. Mine does not display that problem. The top image, from the iPhone, looks just about as good on my iPod touch as it does on my computer display. It might be worth looking at this page with your iPod touch and with your computer and compare them:
http://www.flickr.com/photos/macpublishing/1449627733/

Similar Messages

  • When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

    When the user press the button Calculate Tax  and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
    All setup looks fine.
    Please let me know what can be done on this?
    Regards,
    Peu

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • HT1918 When I go to use my account, it tell me my security code for my credit card is wrong? I just update this a few weeks ago, and was working fine till last night.

    Can not use my account, telling me the security code on my credit card is wrong, just update this a few weeks ago, was working fine until last night.

    Take a look here:
    http://support.apple.com/kb/TS1646
    If that doesn't help, go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Usb headset mic makes noise to whom i talk on skype, but it works perfectly on another pcs. should i update some drivers?

    but it works perfectly on another pcs. should i update some drivers?

    Chances are the headset isn't using standard USB-Audio drivers found on the Mac.    I'd try to find one that knows it is Mac compatible and says it doesn't require any drivers.

  • Should i update to iOS 8.1. I'm running iOS 7.1 on iPhone 4s and it works very fine.

    should i update to iOS 8.1. I'm running iOS 7.1 on iPhone 4s and it works very fine.

    shoud i update or not?

  • Work order should not update the fields in PR

    Hi  Gurus
    My requirements is that workorder should not updates the purchasing data fields in PR  do not go to the shoping cart. How can make it possible.
    Thanks in Advance

    Hi,
          I am not sure of your requirement clearly but check up the below user exits :-
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
    regrds
    pushpa

  • HT4623 Should I update? Was told I should so the other apps work properly? True or false?

    Should I update, bell customer service said no, but I'm not sure if she knew what she was talking about?

    What bugs?
    As far the support personal goes I prefer not to say anything on that subject. It would only get me in trouble.
    Allan

  • Should I update to Maverick?

    I am running Apple Lion 10.7.5 on my 2007 iMac and it runs super slow and freezes a lot.  Should I update to Maverick?  My friend updated his 2008 MacBook Pro from 10.7 to Maverick and it is running a lot better.

    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Installing Mavericks will not fix your problems. In fact before you consider upgrading to Mavericks you should resolve the problems you are having.
    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Ms updates does not work after recovery win 7 pro on dv4-2167sb

    info on problems with MS updates right after a new install of win 7 pro: does not install updates and will not install SP1 from down load . I used recovery disks I made. The OS [win 7 pro] recovered great but MS updates did not work from  the get-go..  {Personal Information Removed} HP NEEDS TO GET ME OS RECOVERY THAT WORKER I HAVE 4 OF THIS DV4-2167SB 'S
    Been on the phone with hp [not US] for more than hr.  talked to two svr. hungup on 3 times,  HP needs some New VP's.

    Hi VP_IA_DOT,
    I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
    Thanks,
    NicNac - HP Support Forums Moderator
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • I have a macbook i bought in 2011.  Should I update my operating system.

    Im using osx 10.6.8 on a mac book bought in 2011.  should i update?  obviously I don't know much about this stuff.  Any help would be great.

    Reasons to update include:
    1. New features that are useful to you.
    There are many new features between 10.6 and 10.10. Many of them involve iCloud, which allows syncing of content across your Apple devices. Some involve efficiency, increasing battery life and reducing CPU load.  You can find reviews of each of the OS versions since SL online. Read them, and see if you think the features are of use to you.
    2. Compatibility with application software that you want to run.
    If you need to use particular apps, then you might want to use the latest versions, and they may require using a newer OS.
    3. Bug fixes and security.
    Whilst no release is bug-free, there is a general movement to get bugs fixed. Yosemite has benefitted from the public beta to have a lot of issues reported and fixed. It also includes security fixes that prevent malware from attacking your computer.
    Reasons not to update:
    1. Older software may not work at all or well on a newer OS.
    You will have to make sure that all your applications, hardware drivers and other software is compatible with Yosemite. This may involve having to buy new versions. Snow Leopard is the last version that can run old PPC software, written for pre-2006 Macs.
    2. Things are different!
    A lot of changes have been made to the interface since SL. You will need to get used to them.
    You could always install Yosemite on an external drive, and give it a test drive!

  • Should i update io7 from io6?

    i am using iphone 4 ios 6 should i update my software or not ? i have listened too many rumors about ios7?

    iOS 7 i great, beautiful. It bests work on iphone 5S, and is doing quite good on 4S, but on the iphone 4 i noticed a bad turnout, i wouldn't suggest that upgrade.

  • Should I update from IOS 6.0?

    I have an iPad Mini (WiFi only version) still running IOS 6.0 with no problems.  Should I update to 6.1.3?  I must admit that reports of problems after each update has me hesitant to do so.
    Advice is greatly appreciated.

    I have 6.1.3 on my iPad mini wi-fi only and have no problems.
    Saturn94 wrote:
    I must admit that reports of problems after each update has me hesitant to do so.
    how many people are going to report that the device and ios are working like they should?  Very few, if any at all.  People only write when they have a problem.

  • Should an update be automatically expected for the Samsung Fascinate?

    Just like many of you I purchased a Fascinate with the promise of some Froyo love in just a few short weeks. This was in September. Now my question is, should we automatically assume we would be recieving an update whether we were promised it or not? I mean would you purchase a phone that had no intention of updating? I pose the question because of the comments stating we purchased the phone knowing it had 2.1 and bought it anyway. Isnt android entitled an update as long as the hardware is up to par?

    Gonzo313 wrote:
    Never said I deserved an update. Android being somewhat in its infancy the lines arent clearly drawn. If updates arent available to a high end android devices doesnt that make it a disadvantage when compared to an iphone?
    Not in my opinion.  I see the iPhone as a music player that also makes phone calls and, without widget support or multi-tasking that will never change.  iOS gets updated about once a year.  Right now, android is getting updated about every six months.  Given that, you could miss every other update and still be on track.  AFAIK, there is nothing the iPhone 4 can do that the Fascinate can't, other than having a FFC, and that is a hardware issue.  You also have to remember that there are (at least) three different parties involved in every update to an Android phone.  1.  Google has to release the source code for the newest version to AOSP.  2.  The manufacturer tailors that code to work for the specific phone, as well as integrating their own UI (i.e. TouchWiz).  3.  The carrier has to test and approve the update, that it works to their standard, as well as adding any sort of carrier apps that they feel should be (or get paid to) put on the phone.  The update then goes back and forth between the manufacturer and the carrier until both parties are satisfied.  With iOS, uncle Stevie decides when the update is ready and tells everybody that it is time to update their phones, so plug into the mothership and take it.  Hard to say, really, which it truly "better", I guess it just depends on what you really need out of your phone.  One of the biggest complaints that a lot of users have about the Fascinate not getting Froyo is because they can't use Flash until then.  The iPhone, however will never have Flash because Apple and Adobe are in a tiff about who stole who's idea and uncle Stevie thinks that you don't really need it anyway, because everybody is moving to HTML 5.  Unfortunately, Flash probably isn't going anywhere anytime soon and, some sites are useless without it.  I've probably gone way off topic and gone on way too long, but that's the way I see it, hope it translated properly.

  • Should I update my iPhone 4 (4.1 to 5.0.1) or stay outdated? NEED HELP, PLEASE!!!!!!?

    Ok, I know that this may be long but bear with me, really need your help guys!!!!
    Ok, so a few years ago, I bought an iPhone 4 (I was in Zimbabwe, now in the US) that was factory unlocked from what I can tell. Reason why I "THINK" it's unlocked is because
    1. It did not have Cydia installed when I got it, just stock with native apps only
    2. Running on 02.10.04 Baseband (That cannot be Cydia Unlocked), I manage used several Network Providers and all Sim cards worked and still do, no problems. (Using T-Mobile Now)
    3. Model Number is MC603B, and according to my research, it is a factory unlocked model.
    Unless im mistaken???????
    Here we go. The iOS 5.0.1 is out and I am now running iOS 4.1 (Jailbroken), which is really bakward, so loads of tweaks and apps cant run on my outdated iOS and i want iOS 5. I have heard people all over the internet complain that after the iOS5 upgrade, their phones locked-up and can't dowgrade or activate after the update, so if that happens im STUCK forever, and I really dont know what to do!!!!
    HERE ARE MY QUESTIONS:
    1. Is my phone really factory unlocked, based on what I listed above? Or is there any other way of checking???
    2. If I DO update, do I risk locking-up my phone????
    ***3. Should I update it "while preserving my baseband" and still manage to Activate it, or just leave it to update my baseband????? PLEASE HELP. Read my questions carefully and answer on what you think.
    Thanks alot guys

    Well, since the iPhone is not officially sold in Zimbabwe, & that's where you purchased it, you can pretty much count on the fact that it was hacked to unlock it, regardless of what you think or see. Thus, you can be pretty much assured that if you update software your phone will be re-locked to the carrier it was originally locked to.

  • Install Updates task not working during Build and Capture in SCCM 2012

    Working with a new SCCM 2012 installation.
    We are trying to get a Build and Capture TS to install all updates for Win7SP1.
    All packages are deployed to DP, build and cap machine is in a collection with all updates deployed to it. Agent installation parameters include "SMSMP" "SMSSLP" parameters. Machine is not being attached to the domain during OS install. 
    Updates can be pushed to existing domain machines, so obviously the updates themselves are working.
    The task sequence works correctly to install the image, but "Install Updates" task just sits there and eventually times out. (No indication of updates being installed.) If this task is working, shouldn't I see a Downloading Updates progress bar, or was that
    eliminated from 2012?

    Same issue for me except I'm running 2012 R2 my B&C runs forever on Install Software Updates, eventually just rebooting and coming back to the login screen of Windows 7 without ever finishing the Install Updates.
    Been working on it litteraly for weeks.
    1- Tried adding .Net 4.52 as an application installation thinking maybe it would resolve the issue
    2- Tried installing via Run Command Line + DISM all hotfixes that require 2 reboots as per (https://support.microsoft.com/en-us/kb/2894518)
    3- Tried to simply REMOVE the same hotfixes from my Software Update Groups alltogether.
    4- Injected all applicable software updates through Offline Servicing in the SCCM Console (Schedule Updates) on the Windows 7 DVD wim file. That way my logic was that once it would hit the Software Updates, there would be a lot less to install.
    I'm at the point where I had to open a case with Microsoft Premier Support as of yesterday. So, nothing new to report yet. But yes, this is a true pain in the ***.
    For the sake of comparison, I am running 4 Update Groups: one containing patches up to 2012. Another one for 2013, 2014 and 2015. I have patches for Windows 7 + Office of all categories except Service Packs.
    If someone has any ideas, feel free to chime in. 

Maybe you are looking for