Show history report

Dear Support,
Where can I get a "Show history" report out of SAP B1? I have a client that needs a report which shows all the updated made on the chart of accounts and business partners, who made the change, what date and what change was made.
When you go to show history in SAP you can see that it is looking at the AACT for the chart of accounts and the ACRD tables but it doesn't seem to pick up and changes that I make today.
Please advise how I can get this information out of SAP?
regards
Clayton.

Hi there,
The AACT table for some reason is not picking up my changes that I have made. There is plenty of history in this table but when I made a change to one of the accounts and then searched for any changes made on that day my query came back with zero results.
So I am not sure what changes it picks up or where from but I can't get what i want out of that table. But when you go to that account and view history it has a record of the change you made and it says that it is getting the information from the AACT table but when i look for it in that table it is not there?
Am i missing something?

Similar Messages

  • "Invoice History Report "show wrong balance for supplier invoice with USD

    Invoice History Report show wrong balance for supplier invoice with USD Currency
    After I run this report i see in the last of this report there is difference between the supplier total
    USD (Currency ) and the open Balance USD , it is decreased the open balance
    for supplier with 2300 USD with out any reasons
    bellow is some data copy of the report
    ======================================================
    Supplier Site Total: SAR 34,700.00
    Supplier Site Total: USD 39,000.00
    Supplier Total: SAR 34,700.00
    Supplier Total: USD 39,000.00
    Open Balance: SAR 34,700.00
    Open Balance: USD 36,700.00
    *** End of Report ***
    ==============================================
    please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
    or it is bug in this report , becuase i compare this report with other report in account payable like
    -supplier open balance letter
    -invoice register report
    -invoice aging report
    all this report give me the amount for supplier USD =39000
    BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
    thanks

    Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
    Thanks

  • Payments received address are no longer showing on history report

    Every year I print my "payments completed" history report.  I then get the state that the payments came from (along with the town, etc).  This year the state is not printed.  Has something changed and what was the change.  Where can I find this information so I can figure the total sales in California.  I sure don't want to pay more sales tax then necessary. 

    Have you tried exporting your data to a CSV file?   That way you get all the fields, (that's what we do, we then use Excel to sort and manage).   This guide has some good info on reports.https://www.paypalobjects.com/webstatic/en_US/developer/docs/pdf/pp_merchantsetupadministrationguide.pdf

  • History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

    Hi all
    I've got a error msg when try to generate a report using Cisco history report tool:
    Error | An Exceptional Error occurred. Application exiting.  Check the log file for error 5022
    It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
    User tried samething on other PC, it working fine.
    only on user' own PC and only choose this report, error appears.
    user runing windows 7 and do not have crystal report installed
    tried reinstalled the software, doesn't work.
    also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
    then tried https://supportforums.cisco.com/docs/DOC-6209  - doesn't work
    attached the log file.
    thanks.

    wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian 
    I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
    this matter only happens on this PC, when user try same thing on other PC, it works.
    so i think it not relate to server or account.

  • PO order history report

    Dear SAP Gurus,
    My client has a requirement below.
    When a purchase order quantity/dates changes is there a report in MM that shows the PO order history report.
    I have tried ME2N/ ME80FN. It does not show me the results what I am looking for.
    For example if an operations planner changes an already existing PO- dates and quantities.
    Is there a way to show Old PO quantity .. New PO quantity Old PO delivery date  New delivery date.
    So that this information could be passed to the vendor to update information on vendor's side.
    Thanks a lot.

    Hi,
    You can use following T Codes for analysis for MIGO Transactions.
    T Codes - ME80FN -General evaluations ( In this report you will get GR number/Service entry sheet number / MIRO Number -all details will come related to PO history) > Enter Document Date >> Document Category (F-Puchase Order) > click on execute button(F8)>>Click on "Change View button >Select Purchase Order History>>and you will see purchase order history report.
    MB59 & MB51 -Material document list with amount /qty.
    If you have any doubt regarding T Code ME80FN, pl revert.
    Thanks & Rajesh

  • Workflow history report best practice

    Hi.
    How do you recommend to make custom workflow history report(s)?
    For example, let's think of the most simple document approval process: initiator uploaded document, manager reviews the document, if approved - document is marked as approved, if not - document should be modified by initiator. In real life
    review can be done by group, business flow will be much more complicated, some tasks will be assigned to other users, etc.
    Now, I need to show feedback received from users in a short, readable format. Let's say we need to know:
    1) when review was made
    2) who made it (name, position, email)
    3) review outcome (approved/rejected/custom)
    4) review comment
    So, nothing unusual here.
    I see the following options:
    Make a view from different sources: workflow history list, workflow tasks list, current library. For me it sounds crazy.
    Write necessary data into workflow history list and don't write there anything else. This option doesn't support multiple reports.
    Write all data into workflow history list and then somehow filter its data. Again sounds crazy.
    Write data into custom SharePoint list and then make views based on it. Looks flexible. But, probably, every workflow will need separated list.
    Write data into external SQL database, then somehow show in SharePoint. The most flexible, can store practically any amount of data, apply any kind of transformation. But data is not in SharePoint directly, some data connection/sync issues might
    occur.
    What will you recommend?
    BTW, there is additional question: all this logging creates so much "noise" in workflow diagram - I write some information on regular basis after some events and that requires adding multiple activities every time: set workflow status, update
    item (set some custom status), write workflow history and write into some external data store. 3-4 repeating events - how can I "group" them into something like 1 activity?

    Hi,
    I would suggest you use the custom list option.
    With SharePoint OOTB List, we can take use of the available features provided to manage data conveniently.
    Also, as a data source, we can also generate different kinds of reports from SharePoint List using other reporting products such as Excel.
    For the second question, I would suggest you open a single thread for it to let others in this forum easier to focus on one question in one single thread.
    Feel free to reply if there are still any questions.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Device history report incredible slow

    Hi,
    Our device history report is incredible slow. We have had the same problem from the start using the SAP ME product.
    Device history report is very useful, but has no value when it takes 2 minutes to run.
    We are running 5.2.5.4 release. Performance in application is good and all other reports are running fast. Debugging shows me that the code could be improved for this report. At one time report was improved to run in "only" 20 seconds.
    Last time I think the issue was fixed in SP03 Patch 1. It's really bad for the product that this useful report is this slow.

    Hello Knut Ole,
    I would suggest opening a support ticket in order to investigate the performance issue. SQL trace with timing information must be analyzed.
    Regards,
    Alex.

  • IDOC Change/History Report

    Hi All,
    Is there an IDOC history report that would show what was changed within an IDOC standard from SAP?  I would believe so but I can't seem to find it.
    Thanks,
    Pete

    Peter,
    There's not really a useful audit trail for iDocs, certainly not from a reporting perspective. However you can use the Status records from table EDIDC to ascertain which iDocs were edited, then compare back to the original.
    Whenever you edit an iDoc, the system automatically saves a copy of the original, with Status 70. The current version that you are working on will then be status 69, until you reprocess it. It will also add a relationship between the two iDocs. For example, I start with iDoc 1, which has failed. I edit the iDoc, which creates a copy of the original as iDoc 2, changes the current status to 69. A relationship is created between iDoc 1 & 2. I then reprocess iDoc 1 again, but again it fails.I edit the iDoc, which creates a copy of the it as iDoc 3, and changes the current status to 69. A relationship is created between iDoc 1 & 3. This time I reprocess it, it is successful, and posts. So I end up with :
    iDoc #     Status    Relationships
    1               53               2 & 3
    2               70               1
    3               70               1
    You can also see the relationship iDoc numbers in the Status 69 Messages in table EDIDS.
    So, in theory, you could compare the Data Records (EDID4) of the Status 53 iDoc with the Data Records of the iDoc specified in the earliest Status 69 Message, and display any differences. I think the best you could hope for would be to display the Segment/Field differences, which doesn't exactly make for the most user-friendly report, it would still need interpretation. If you wanted to create a complete User/Audit-friendly report, it could end up being bigger than Ben Hur.
    Good luck, I hope this helps.
    Cheers, Paul.

  • In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

    In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

    One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
    Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
    Clinton

  • Vendor History Report

    Dear Experts
    I have to create a Vendor History Report.
    is there any standard report for the same?  if yes pls let me know.
    Thanks in advance
    Regards

    No Dear,
    There is no such report.
    Generally, we use to go through MENU to see the changes 'DISPLAY CHANGES'.
    For report development you have to use two tables with reference to T.Code creation and change T.Codes.
    Tables: CDHDR Change Log Header, CDPOS - Change Log Line Item.
    Passing object related to youe Vendor Details, you can create report.
    Regds,
    Anil

  • History report page prints before printing each new document?cc=us

    How do i stop my HP Officejet 6700  Premium from printing a history report page before printing each new document, using Windows 7 & Using Microsoft Word? When I open a document and print it, it prints a history including: File Name; Directory; Template; Title; Subject; Keywords; Comments; creation Date; Change Number; Last Saved On; Last Saved By; Total Editing; Last Printed On; As of Last Printing....
    Everything worked perfectly for a year, then I had to reinstall the printer because I deleted it by mistake. I cary it with me when I travel to meetings and didn't have my install disk, so I had to download the install software. I haven't changed any settings in Word, but it appears that the report is generated from Word.
    Help will be appreciated. I can't find any other topic like mine to see an already presented solution.
    This question was solved.
    View Solution.

    Hi,
    The report indeed being generated by Word and not by the pritner driver.
    As you did not clarify your MS Office version I included the steps for Word 2010, I believe the same should also apply for Word 2007:
    From Word click the File menu, then select Options.
    Select Display from the left pane.
    Under the Printing Options sections, uncheck the box next to Print document properties.
    Click OK and try printing again.
    If you cannot find the specific option, please clarify your exact Microsoft Wiord version.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • History Report

    Dear all
    As per requirements i have mostly completed the PM history report, which comprises Equipments specifications, BOM.
    Additionally i have to add the very important tasks, spares , Cost of operation also. Here we couldnt consider all the operations , spares consumptions of the operations. How to distiguish with the normal jobs compared to history  jobs, all breakdown hours with reason , critcal spares replacement, service technicain name which is required for me?
    In AUFK,AUFM, AFIH etc table will have the details.But i need those things which is related to history only. Because the history card of equipement will vary according to the equipement.(not required all the job cards)
    Example: Engine.
    The B,C check and replacements of filter will frequently happen. Suppose exhaust valve failure, replacement, fuel pump calibration, E check of engine, Cost of maintenance for this critical jobs etc.
    Any light on this issue?

    hi
    i think form your query breakdown jobs are most important ,you can sort the operation with the help of SYSTEM CONDITION ,but it has to be entered while creating the operation.
    Since for normal jobs it is does not require to shut down your equipment and do the operation,also for material you can select the material which are all assigned to the particular operation .but only thing is it has to be correctly assigned
    regards
    thyagarajan

  • History Report of All the Completed Workflow

    We have a requirement of generating the history report of all completed workflows in a month.
    Where is the History data stored for all the workdflows. Is it in the Database tables or just in Workflow reports?
    How can this be extracted for above requirement.
    I know there is an iview for providing the history of a particular Workflow instance. Is there anything available for multiple WF instances.
    Please help.
    Thanks,
    Amber
    Edited by: amber gupta on Mar 8, 2008 3:17 AM

    Amber,
    I think you can use server logs for this purpose and also there is a status=completed in workflow tab in DM.
    But exact thing is log file where you can see triggered and completed workflows.
    Hope it will help you.
    BR,
    Alok

  • Invoice History Report not fetching any data without parameters

    Hi
    As per user guide, you can run the Invoice History Report without giving supplier parameter. "If you want to submit the report for one supplier, enter the supplier. Leave this parameter blank to submit the report for all suppliers."
    But when we run the Invoice History Report, if we don't give any supplier, no data is coming in the report. If we give a supplier, data for that supplier is fetched by the report.
    Has anyone faced this issue, is there any solution for this?
    We are on the Oracle Apps 12.1.1 and the version on the report RDF is 120.11.12010000.5
    Thanks!

    Hi,
    could you copy the MDX here ?
    Would you be able to use ST01 / ST05 to trace further details ?
    You can also go into the registry :
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\SAP\BW MDX Query Driver
    set the Trace to Yes
    then use the path:
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\SAP
    set the "TraceDir" to the path for the logfiles
    Ingo

  • Apps Report Error(Supplier Payment History Report)

    Hi team,
    APXPPHIS module: Supplier Payment History
    Iam getting below error and unable get report Output.
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.WE8MSWIN1252
    Enter Password:
    MSG-00001: After SRWINIT
    ORA-24324: service handle not initialized
    ==> SELECT V . vendor_name C_VENDOR_NAME , upper ( V . vendor_name ) C_SORT_VENDOR_NAME , V . segment1 C_VENDOR_NUMBER , VS . vendor_site_code C_VENDOR_SITE_CODE , decode ( VS . address_line1 , null , '' , VS . address_REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-300: service handle not initialized
    ==> SELECT V . vendor_name C_VENDOR_NAME , upper ( V . vendor_name ) C_SORT_VENDOR_NAME , V . segment1 C_VENDOR_NUMBER , VS . vendor_site_code C_VENDOR_SITE_CODE , decode ( VS . address_line1 , null , '' , VS . address_Report Builder: Release 10.1.2.3.0 - Production on Wed Oct 2 16:30:25 2013
    Thanks & Regards
    San

    San,
    Please see (Supplier Payment History Report Completing With Error (Doc ID 1409467.1)).
    Thanks,
    Hussein

Maybe you are looking for