Show Image in user form

Hello Everyone
I need to display an image in a picture box control similar to the one in Item Master-Remarks tab with the add/delete picture buttons and their functionality. How can i do this.I have searched through the forum and haven't found a viable solution yet.Any help would be appreciated.
Thanks and Regards
Raghu

Hi Raghu Ram,
try this sample code
here dim objpicture as sapbouicom.edittext
void ShowFolderBrowser()
OpenFileDialog MyTest = new OpenFileDialog();
Process[] MyProcs;
WindowWrapper MyWindow;
MyProcs = Process.GetProcessesByName("SAP Business One");
if (MyProcs.Length != 0) {
for (int i = 0; i <= MyProcs.Length - 1; i++) {
MyWindow = new WindowWrapper(MyProcs(i).MainWindowHandle);
MyTest.Filter = "Image files (.bmp)|.bmp|Image files (.jpg)|.jpg";
if (MyTest.ShowDialog(MyWindow) == DialogResult.OK) {
objPicture = objForm.Items.Item("53").Specific;
objPicture.Picture = MyTest.FileName;
else {
// Console.WriteLine("No SBO instances found.")
void BrowseFileDialog()
try {
ShowFolderBrowserThread = new Threading.Thread(ShowFolderBrowser);
if (ShowFolderBrowserThread.ThreadState == ThreadState.Unstarted) {
ShowFolderBrowserThread.SetApartmentState(ApartmentState.STA);
ShowFolderBrowserThread.Start();
//ShowFolderBrowserThread.Join()
else if (ShowFolderBrowserThread.ThreadState == Thread State.Stopped) {
ShowFolderBrowserThread.Start();
ShowFolderBrowserThread.Join();
catch (Exception ex) {
ShowFolderBrowserThread.Abort();
finally {
// ShowFolderBrowserThread.Abort()
if (pVal.ItemUID == "62") {
this.BrowseFileDialog();
if (objForm.Mode == SAPbouiCOM.BoFormMode.fm_OK_MODE) {
objForm.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE;
Rgds
Micheal

Similar Messages

How to show image file on Form using From Builder 10G

Hi
Well, Gurus... i want to attach picture at runtime on my Form. The user select name of article and it automatically attach the image in my image item on Form.
I'm using following code but it doesn't working.
PROCEDURE GET_ARTICLE_PIC IS
image_dir VARCHAR2(80) := 'D:\Images\';
photo_filename VARCHAR2(80);
BEGIN
:System.Message_Level := '25';
photo_filename := image_dir||:ITM_DIST_MST.ARTICLE_CODE||'.gif';
message(photo_filename);
message(photo_filename);
READ_IMAGE_FILE(photo_filename, 'GIF', 'ITM_DIST_MST.ARTICLE_IMG');
IF NOT FORM_SUCCESS THEN
MESSAGE('This Article has not Picture.');
END IF;
:SYSTEM.MESSAGE_LEVEL := '0';
END;
Please help, its urgent

Is it throwing any error?
do you set correctly the ListUrl parameter? in this case it will be "PublishingImages"

Show image on the form Java WS gets image. Call this WS on button click

Hi,
Is there a way to show an image on the form. On the form I have along with the data I have a button that when clicked get and show the image itself on the form. I have a Java WebService that gets the image from the remote location. How can I make the button click event to call this Web Service and show the image on the form itself. Any help is appreciated.
Thanks

WHiteSox, are you on client/server or web version.
which version of forms are you using.
something i can think of is.
during the click to call the webservice, copy the image to the local system.
next step is, using READ_IMAGE_FILE built in which reads the image from the local file system and displayed on the forms image item.

How to show image in Smart Form dynamically , Image is stored on local PC

Hi All,
I have a requirement where user can attach any image to PM Order in T-code IW33. Now this image gets stored on user`s local PC.
After this user will generate a report which is a Smart form, On this Smartform i have to show that attached image.
So that image will contain Order Id and attached image.
How this can be achieved.
Regards,
Abhishek

Actually this Image(Image of Signature ) will be coming from Mobile device and then it will be stored as an attachment for an PM Order.
So there will not be any manual interuption and therefore no one will be storing this in se78. But this image gets stored in local PC. And now i have to get this image on my Smartform.
Any idea how to do it?
Regards,
Abhishek

How to show image in a Transperent form ?? screen shots attached

Hi
Help me in making Images appearing as Transperent . Screen shots attached
I am having a TextInput and a Search Button (The Functionality is that user can enter something in this TextInput and makes a Search Operation by pressing Search Button .)
At the Initail screen display i need to show Some Image in transperent Inside this TextInput , when Mouse is focused on this TextInput , the Image will be completely Invisible .
Now the question i want to ask is , how to show image in a Transperent form ??
Please find the screen shots attached with this Thread .

Thanks for specifying the alpha property of an Image .

"Users " Form Name from "User Definied Field Definition" does not showing

Hi everyone!
I start to implement the new SAP Connector on OIM 9.1.0 and one of steps is configure the lookup Lookup.SAP.HRMS.AttributeMapping.
I need to add more fields beyond those already exists, and in accord to Documentation, I need to create the UDF of these fields, but when I search of "Users" form name form "User Definied Field Definition" option, I receive the follow response:
"Query Failed: No Record For this Query"
Thinking about it, I think that necessary create one User Form, but...this form isn't a standard form?
What I do in scenarios like this?

Can you share your environment details. Are you trying it out in a newly installed OIM ?_
Yes, it's a newer fresh installation of OIM 9.10. We use the old version (9.03) in production environment and would like to upgrade to 9.10. This issue occur in a fresh installation in Development Environment.
The one possible reason for this may be due an improper upgrade to 910X. I actually faced this issue while I was installing/upgrading my OIM. I did the process all over again and it was just perfect. I am not sure that this might be an issue with you or not. But there is simply no othe reason for the Users from not showing uo in the "User Definied Field Definition"._
If you have taken a fresh backup of the schema just after installation, then import that backup dump and see if you are able to view the Users form. If in case you are not able to view it then your installation / upgrade is corrupt._
No, we don´t have a fresh dump of environment. We just follow the documentation and all the steps was done without problem. The SAP connector import the fields from the reconciliation using flat IDOC file, just only the standard fields. We need to add newer fields and attributes and after, we face this problem.

Show image item from table into form's item.

Hi Friends,
My problem is:
I have 1 table with 2 cols:
eid number
e_pict blob.
I created a form (block based on this table). I'm able to show any valid image file stored in disk into e_pict (declared as image item) using the built_in READ_IMAGE_FILE. and also able to save it in the table test. But if I want to do the reverse process I mean retrieve the image from table's field to the image item of form, it creates problem. I even cannot compile the post_text_item trigger of eid:
select e_pict into :test.e_pict
from test
where rtrim(eid)=rtrim(:eid);
It is giving error:
bad bind variable 'test.e_pict'
Pls help me.
Regards,
Pragati.

If I declare the image field as long raw instead of blob then also the same problem.
I can save the image from file to database through a form but cannot retrieve an image from database to form.
Pls help.
Thanks in advance,
Pragati.

How to Show Image form Library with Thumbnail view on visual Web part page using XsltListView web part?

<WebPartPages:XsltListViewWebPart ID="XsltListViewWebPart_AppWeb"
runat="server" ListUrl="Lists/MyList" IsIncluded="True"
NoDefaultStyle="TRUE" Title="XsltListView web part" PageType="PAGE_NORMALVIEW"
Default="False" ViewContentTypeId="0x">
</WebPartPages:XsltListViewWebPart>
For any List it work fine but for Image form library its not working:
My url: http://sitename:portname/PublishingImages/Forms/AllItems.aspx
Please provide Solution.
Question:How To show image library with thumbnail view in Visual Webpart using xslt webpart.

Is it throwing any error?
do you set correctly the ListUrl parameter? in this case it will be "PublishingImages"

Why doesn't default CREATE USER form show a "Check" Page before submitting

Hi
Interesting question.
When I create a User (using my Customized Create User Form), and I press SAVE, the Form is submitted immediately. There is no "stop-and-check" page, which allows one to review the entries made BEFORE submitting the form itself.
For example : when EDITING or UPDATING a User, and you press "Save", the form is not submitted right away. Instead, a new page opens, where you can review the changes you made, to ensure that they are correct. In fact, at the bottom of this new page, there are 4 standard buttons : SAVE...........RETURN TO EDIT............CANCEL
This is a very good system, because it allows you to check your entries, and make sure they are correct, before pressing SAVE again to submit.
However, the "Create User" form does not have this same arrangement.
Is there any way to customize the Form, so that, when creating a User, and you press SAVE, a "check-page" first shows up (just like when updating/editing a user) ?
Thanks

Hi
Interesting question.
When I create a User (using my Customized Create User Form), and I press SAVE, the Form is submitted immediately. There is no "stop-and-check" page, which allows one to review the entries made BEFORE submitting the form itself.
For example : when EDITING or UPDATING a User, and you press "Save", the form is not submitted right away. Instead, a new page opens, where you can review the changes you made, to ensure that they are correct. In fact, at the bottom of this new page, there are 4 standard buttons : SAVE...........RETURN TO EDIT............CANCEL
This is a very good system, because it allows you to check your entries, and make sure they are correct, before pressing SAVE again to submit.
However, the "Create User" form does not have this same arrangement.
Is there any way to customize the Form, so that, when creating a User, and you press SAVE, a "check-page" first shows up (just like when updating/editing a user) ?
Thanks

Copy an Image from a User form Picture Box to Worksheet Picture Box

I am new to VBA so apologies in advance...
I have a user form ("UserForm1") where an image is selected via a command button file dialog function
and then displayed in a picture box ("RRPPicture").
When the user clicks another command button to progress ("NextPage1"), I want the image held in ("RRPPicture")
to automatically be inserted into a fixed cell location or picture box on a Worksheet called ("Report").
Does anyone have any ideas, is it possible, I really have scoured the forums I know of...
Many thanks in advance!

Can't be sure but account verification possibly indicates that an email has been sent to you from OneDrive and you need to confirm and verify by clicking on the link as per the directions in the email and then follow any directions and this verifies
the account.
Are you the same person who originally posted the question on this thread and have simply changed your pseudonym?
In case you require assistance to upload a file to OneDrive:
Zip your workbooks. Do not just save to OneDrive because the workbooks open with On-Line Excel and the limited functionality with the On-Line version causes problems.
To Zip a file: In Windows Explorer Right click on the selected file and select Send to -> Compressed (zipped) folder.)
Do not use 3rd party compression applications because I cannot unzip them. I do not clog up my computer with 3rd party apps when there are perfectly good apps supplied with windows.
Go to this link. https://onedrive.live.com
Use the same login Id and Password that you use for this forum.
Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded.
Select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
Right click the file on OneDrive and select Share.
Do NOT fill in the form; Select "Get a Link" on the left side.
Click the button "Create a Link"
Click in the box where the link is created and it will highlight.
Copy the link and paste into your reply on this forum.
Regards, OssieMac

How to Display an Image on my FORM

Good Day!
I would like to ask some help from you guys with my problem on how to display an image on my form. I would like to display my uploaded image on my form but instead of an image, the get_blob_file is showing. By the way, I'm using Apex 4.1
I downloaded the Order Entry Sample Application and followed the Page 6, the Product Details. I even made snapshots of each details from Page Rendering to Page Processing in order not to miss a thing.
At the moment, I was able to upload or store the image on my created Oracle table and also able to retrieve it on the Download Link Text with Content Disposition value of Inline, provided by APEX Settings. If I invoke the Download link beside the file browser, a page with the image will be shown, below is the address:
http://127.0.0.1:8080/apex/apex_util.get_blob_file?a=200&s=339877802936975&p=230&d=7107921433296839&i=7107601420296838&p_pk1=54&p_pk2=&p_ck=7D6512D967336C4B94258EEA3CDF1BE6&p_content_disposition=inline
However, instead of showing the image on a region, below is the one showing on my Form:
<img src="apex_util.get_blob_file?a=200&s=339877802936975&p=230&d=7107921433296839&i=7107601420296838&p_pk1=54&p_pk2=&p_ck=7D6512D967336C4B94258EEA3CDF1BE6" />
As you can see the parameter values are the same but I know I missed something that's why I'm here :)
I would highly appreciate all the help you can provide and many thanks in advance.
I tried to change gear by making an html region of type PL/SQL (anonymous block) and a procedure but still no image :(
Below are the scripts.
declare
cursor cur is
select *
from wsemployee
where empid = :P230_EMPID;
begin
for rec in cur
loop
IF rec.mime_type is not null or rec.mime_type != '' THEN
htp.p( '<img src="my_image_display?p_image_id='||NVL(rec.empid,0)||'" height="'||100||'"/>' );
else
htp.p( 'No Image ');
END IF;
htp.p( ' ');
end loop;
end;
PROCEDURE
create or replace PROCEDURE my_image_display( p_image_id IN NUMBER)
AS
l_mime VARCHAR2 (255);
l_length NUMBER;
l_file_name VARCHAR2 (2000);
lob_loc BLOB;
BEGIN
SELECT MIME_TYPE, PHOTO_BLOB_CONTENT, PHOTO_FILENAME,DBMS_LOB.GETLENGTH(photo_blob_content)
INTO l_mime,lob_loc,l_file_name,l_length
FROM wsemployee
WHERE empid = p_image_id;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(l_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || l_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(l_file_name,instr(l_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
END my_image_display;
Edited by: user13831927 on Dec 22, 2012 3:24 PM

Hi Ying,
you can add a UDF to the table spp2 with a programm
but the table is not yet listed in the 'Manage User Fields' form.
there's no way to "enable" it - sorry

Want to scan an image from oracle forms -- Is it possible??

Hi all,
I want to scan an image from oracle forms through a scanner. I have not found any help on this topic. Pls help with example or code or with demmo form.
BR
Tarik.
Edited by: Tarik_kuet on Sep 9, 2008 1:39 PM
Edited by: Tarik_kuet on Sep 9, 2008 1:39 PM

A colleague of me did it like this:
* the scanner is connected to a network document server.
* the document server sends(ftp) the image to the oracle XDB
* a form shows the scanned documents(using a view on the ftp directory in XDB using path_view)
* in this form the user can move the scanned document(s) to a (blob field) in a table.
Hope this helps a bit...
Edited by: poelger on Sep 9, 2008 10:08 AM

How can i use static image in a form

I want to use a static image in the form I mean i need some images to show to end user and images but are static images, i was trying to copy paste image from from outside to forms but could not do it.
Please what is the way to add static image in the form.
regards
Maz

Hi
Advice_: Pls note don't change the path of ur image cause this will hide displaying it into ur form.
Regards,
Amatu Allah.

Pop up a window to show images

Hi, I am trying to show images when the user rolls the mouse
over the image but I want to show them as a pop up window only when
the user is on the image.
Any ideas how can I handle this? I will have variety of
images and want the same behavior for all of them.

mouseOver and mouseOut event functions for the images.

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

Show Image in user form

Similar Messages

Maybe you are looking for