Show quantity discounts only for wholesale

I have consumer and wholesale pricing set up. Wholesale has quantity discounts which work when you login and add a quantity to the field. The problem is the way I have it now you can't see what those price breaks are. My question is, how do I display those price breaks without also showing them to consumers? Consumer price is $9 per item. Wholesale prices are $4.50 for up to 99 and $3.25 for 100 to 200. Thanks

The only way would be to create a wholesale set of products and catalogues and place those behind the secure zone so that only people who are logged in can see them. Then you can use RRP field or custom fields to display that data.
-m

Similar Messages

  • I want to give sales discounts only for the first five sales order

    The scenario is that I have to limit the sales discount to first five sales order that is executed, from the 6th the system should not allow any sales discounts

    Hi,
    If I understand your requirement correclty you want to pass discount for a particular item for a customer only for the first five sales orders irrespective of the quantity you sell on this order. As I understand this way of limiting discount by way of the count of sales orders is not possible.
    What is though possible is to limit the discount per customer or per article or per customer and article combination to either a certain fixed value of discount or limit the discount to certain fixed quantity sold for that article.
    The config required is
    Condition type  : Scale basis -Either value scale or quantity scale. Scale type -leave this blank.
    Condition record  :Chose the scale type as "B- To Scale" and at the time of condition record creation you can define your own Calculation type -either fixed amount,percentage,quantity etc.
    All the best.
    Kartik Shah

  • Restrict discount only for 10 orders

    Hi
    i want to restrict discount for only 10 customer for that i did some seeting in v/06 condition type and activated the condition update but when am creating condition record and in additional data there is option called Max no of orders when am entering 10 its throwing error enter a valid value. so kindly help me.
    thanx

    Hi there,
    If the requirement is to give discount only to 10 specific customers, then check the key combination of the condition record.
    If the condition type has a key combination of sold-to / ship-to partners, then maintain the condition type only for those customers to whom you want to give the discount.
    If your requirement is to give discount to any first 10 customers, then logic is different. In that case you can define the condition type as manual. Since it is only for 1st 10 customers, then the order entry person will manually give the discount only to first 10 customers.
    If you dont want manual intervention, then you can do this. Check for what sales area / order type you want to give this discount. Then in the requirement routine of that condition type write a customized code. In the code put a logic such that the system takes a count of VBAK entries in that salea area for that order type. If the count of VBAK <= 10, only then the condition type will apply.
    Hope thsi works.
    Regards,
    Sivanand

  • Showing Sub-Totals only for Specific Column in PowerView

    Hi,
    Is there a way of showing the sub-totals only for specific columns in a PowerView Matrix?
    I am only aware of showing the sub-totals for all or non of the columns.
    Thanks and Regards,
    Justin

    Hi Justin,
    According to your description, you want to get sub-totals specific columns within columns group. Right?
    In this scenario, we can use IIF() function in expression to achieve your goal. The expression will only return the total value when the column value is a specific value, otherwise we can make it return nothing. Try the following expression:
    IIF(Fields!Column.Value="[specific value]",Sum(Fields!Total.Value),nothing)
    We have tested this scenario in our local environment. Here are screenshots for your reference:
    Reference:
    Expression Examples (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • A report to show the discount given for each order

    Is there a standard report that will list the discount given for an order and also how much (in terms of percentage) as compared with the total sales value?
    Thanks

    Hi,
    I believe that this discount is a condition in your pricing procedure, and not a dicount given in FI, right?
    If is a condition in your pricing procedure, you can create a LIS structure to save this discount in a cumulative way.
    Or, you can construct your own report through a query (SQ01) or a Z report based on the Logical Database (SLDB transaction), logical database AAV is the more indicated.
    I hope that this helps you.
    Regards.

  • Files or folders created by one user show as read only for others

    We are using Server version 3.2.2, we have a group call production and then we have 9 users plus the administrator account.  All users are assigned to the production group.  We have a single share called customers and the group "production" has read and write permissions for the share and also for all the underlying folders and files.
    Each user logs onto the share with their own username and password.  But, when a user creates a new file or folder on the server within the "customers" share, they are assigned read and write permissions and everyone else is assigned "no access".
    We then go into the folder on the server and assign the group "production" read and write access and life goes on, but the issue is that we should not have to.
    From this description, can anyone tell me what we are doing wrong?

    In the sidebar of the Server.app window, select the icon at the top with the name of the server. Then select the Storage tab in the main window pane.
    Navigate to the folder in question and select it. From the popup menu at the bottom with a gear icon, select
              Edit Permissions...
    Verify that the permissions are what they should be, and make changes if necessary. Then, from the same menu, select
              Propagate Permissions...
    Check all applicable boxes, including Access Control List. If in doubt, check all boxes. Click OK.

  • Shows Page Properties Only for Editing

    My program won't let me edit anything but page properties. That is the only bar that comes up, No text, no nothing. Help!!!!!!!!!!

    You can try trashing the preferences in your user library -> preferences (Mac) or Application Support folder (Windows).  If that does not work though you may need to re-install the application.

  • Loyalty Discount only good on certain Phones?

    My phone and my daughters phone are both due for upgrades mine being the main line is also due a $50 loyalty discount. I log on to the upgade page for my phone and I see the Droid Razor for
    Full Retail Price
    $649.99
    2-Year Contract
    $299.99
    Upgrade Discount
    -$50.00
    PRICE
    $249.99
    I  then log on to the upgrade page for her phone which has no $50 discount and price the Droid Razor  and get this 
    Full Retail Price
    $649.99
    Price with 2-year contract
    $249.99
     The same is also true for the Rezound and the Samsung Galaxy Nexus .So if I were to use my upgrade and the so called $50 discount for a Droid Razor I would really not be getting a $50 loyalty discount. So much for loyalty.  No where does it say the $50 discount only for certain phones.

    The Droid Razr is $299.99 with a new two year agreement. Are you referring to the $50.00 New Every Two discount when you say loyalty credit? If your line is eligible for a $50.00 credit then the price for your line would be $249.99. 
    Without looking at your account I am unable to determine why your other lines show the same price for the Droid Razr. Only the primary line is eligible for the New Every Two discount. Do you have an employee discount that may be discounting the equipment on all the lines?
    If you would like me to take a closer look at your account, please send me a private message with your name and mobile number and I will be more than happy to further assist you.

  • Quantity, Discount and Gift Box now showing

    I have an issue that I am not sure can be fixed but will try here.
    I have uploaded my Muse site to business catalyst and have started setting up templates for the various E-Commerce  that will be needed. SO far I have the catalog and product pages working by adding the {tag_pagecontent} to the muse site and setting the template in Business Catalyst to that page template. This has worked so far!
    Now I am working on the checkout process, the first thing I am trying is the view cart. Everythng currently is working on the cart (after setting it up the same way as above) except it is not showing the boxes for quantity, discount and gift voucher. I did not change anything in the layout itself except the template. It will be hard for people to see that they can change it there without the box.
    Any suggestions to correct this would be appreciated.

    They are in the original layout which I have not changed. It is as soon as I apply the template with the {tag_pagecontent} from muse when it changes

  • Printed invoice shows quantity only *000000  instead of 10.000.000 pc

    Printed invoice shows quantity only *000000  instead of 10.000.000 pc.
    How to get 10 000 000 seen in printed / pdf invoice?
    Thanks.

    Dear Mirala,
    Even i have experienced the same issue  couple of times . I have solved the issue by increasing the field length in the form layout. which is assigned to the out put under heading "PDF/Smartform Form".For doing this we need to take the help of Developer/Abaper .
    Please try this and let  me know .
    Thanks and regards
    Veera

  • Can I show a data label for only one point in a series?

    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
    If this can't be done, I guess that adding a text box over those points would work.
    Thanks

    Hi W-T,
    Welcome to Apple Discussions and the Numbers '09 forum.
    wahoo_tiger wrote:
    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    Sure. Here's and example labeling only the MIN and MAX points.
    Column B contains the data charted with the blue line.
    Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
    Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
    Regards,
    Barry

  • HT4060 Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged informatio

    Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged information. How can I get it to charge beyond 1% so I can proceed to troubleshoot?

    I have had your exact problem with my old 3GS, now I cannot even get it to turn on, I still see that it is supposed to be charging though, but it never charges any so it seems.
    I replaced the Lower Dock Connector Assembly back when it still charged while hooked to my PC, and it found it made no real difference.
    http://www.amazon.com/gp/product/B003Y5YXLK/ref=oh_details_o05_s00_i00?ie=UTF8&p sc=1 
    At this point I am not sure if I should replace the battery and hope for the best, or just junk the phone, I cannot really sell it if I cannot reset it...

  • My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

    Hello Friends,
    I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
    1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
    2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
    (I'm using windows 7)
    Friends, Please help me with the above problems. It will be a great help.
    Thank You.
    R.SAMALA

    Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    Check this thread out -> iTunes 10.4 & Multimedia Keyboard
    It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
    pikot wrote:
    Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
    - You need to open a text editor (like notepad) as an administrator.
    - Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
    - Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
    iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
    - Save the file
    - Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

  • Movie Art not showing for synced movies, only for streamed ones

    Movie art is shown correctly in iTunes and while streaming, but not on the movies synced (these show poster frame). The only 'movies' that show correctly their movie art in iTunes, streaming and synced are TV Shows, which has lead me to think that the size of the .m4v has something to do. I have to do tests to determine the posible size limit, but for now all the TV Shows have a file size less than 2GB. I'll try to do some testing as soon as work allows me to get back to a normal life, (T_T)

    Back again with some initial findings:
    1. Size of the file does not matters. It shows the poster frame for .m4v files of any size.
    2. Taking again into account your post, I checked every detail between the ripped TV shows and the ripped DVD movies and everything was the same except one small detail: audio settings. The ripped TV shows had an original Dolby Surround soundtrack, so I encoded them choosing the 'Dolby Surround' audio mix setting in the encoding program while with the ripped DVD movies that had an original Dolby Digital 5.1 I choose the '6 Channel Discrete' AAC 5.1 audio mix.
    Noticing this difference, I tried encoding one of the previous movies that had the movie art issue using the same settings, but changing the audio mix setting from '6 Channel Discrete' AAC 5.1 to 'Dolby Pro Logic II'. Imported it to iTunes, applied the Movie cover art, synced with the Apple TV and there was the movie art in the Appke TV.
    I'm gonna try again with different movies, but it seems, preliminarily, that the AAC 5.1 encoding setting does something to how the Apple TV sees the movie art in the file tags even though iTunes sees it alright.
    I'll let you know what results come out of my tests.
    Thanks again.

Maybe you are looking for