Showing 0 or Null instead of blank in rpt?

Hi,
I created a report in the below fomat :
-------- Col1, Col 2, Col 3
Row1 - 12, 1, 01
Row2 - 11, , 94,
Rown - 23, 34,
As per the condition defined I am not getting any value under col2-row2 and col3-rown...It is diaplayed as blank in the rpt.
I would like to show 0 or Null instead of blank. How can I achieve this?
Thanks....VK
Edited by: 793773 on Sep 29, 2010 11:22 PM
Edited by: 793773 on Sep 29, 2010 11:24 PM

Yup I achieved it using IFNULL function. Below syntax I used.
IFNULL(FILTER("- Quantity"."Total Quantity" USING (Product.TEXT_0 = 'Day')),0)
Regards....VK

Similar Messages

Discoverer 10.1.2.55.26 Viewer Shows NULL instead of Blank

Hello All,
we recently installed Discoverer 10.1.2.55.26 and applied cumulative patches(CM4). we migrated 9.04 version reports to Discoverer 10g(10.1.2.55.26).
On all the Reports, we see NULL instead of Blank spaces in the data in the viewer. How can we change all of the reports to show blank space instead of NULL.
Please share your experience and thoughts on this Issue
Thank you
Chandu Ambati

Thank you Tamir,
Before i try on the big bang approach. I tried changing the worksheet options for one of the worksheet that shows NULL.
I changed from NULL to blank space and saved the workbook.
we use Oracle Portal to show these workbooks as Portal Views. Portal View was showing NULL before the change, and after changing the worksheet options and saving it, i refreshed the portal view and it started showing Blank instead of NULL. Works fine for that day.
The next Day again it started showing NULL.
Do u think are we missing any step?
Thanks again for your help.
Chandu Ambati

Discoverer report showing null instead blank

hi,
I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
regards
kumar

hi,
I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
regards
kumar

How to show text instead of blank value in SelectOneChoice list.

Hi,
I have a requirement where I need to show some string like 'Please Select Value' instead of blank item in the select one choice list. So instead on blank value, this string will be displayed in the choice list and if user doesnt select any value it should be treated as normal blank value and validation should be fired.
May I know is there any property which we can set declaratively or any workaround for this?
My JDev version : 11.1.1.7.0
Many thank in advance.
Regards,
Dileep.

Hi,
In the VO list of values, check "Include no selection item", choose "Labelled item first of the list" from the drop down and give your custom label.
Thanks

Date fields are showing as / / in DSO for blank dates or no dates

We are loading flat file data to DSO and the date fields are showing as / / in DSO for blank dates or no dates in the flat file source system. We don't want to see this / / and instead of this, we would want to this field in DSO to be in blank. Please help how to achieve this. Is there any way to do this transformation. If yes, then can you please provide the sample coding.
Advance Thanks,
Christy

I have added the code and data loading is successful. while DSO activation, it is failing. The error message is,
Value '#' of characteristic 0DATE is not a number with 000008 spaces.
It seems that we need to change the code. Can you provide me the corrected code please. Thanks.
Christy

How to display # instead of blanks....

Hi Folks,
i have a problem in displaying the query and my query is based on infoset and in my query some master data object is also there and i am displaying the attributes for that.for the transsaction data objects it is showing # values in my report but for hte master data object and for its attributes its not showing # values.it is showing "blank" .please let me know how can i show the # values for these objects instead of blank values..
plz reply asap,as it is very serious issue...
your help will be rewarded...
Thanks,
Ashok

Hi
Can you please explain it with an eg?
or try to work out with display mode as key & text
Cheers
SM

My iPod keeps showing the apple logo + a blank screen and the lock screen keeps freezing when trying to unlock it.

Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Open items in GL is showing green tick instead of red point

Hi experts,
In some GLs,we have observed that while run FBL3n,Open items in GL is showing green tick instead of red point.
Please advise.
Regards,
Samar

Hi experts,
Thanks for the reply.
After doing changes in OBA5 & SM30,in GL of all accounts we have put tick under open item management.But in case of two GLs where we have found balances and later we made said GL balance to Zero.But when we try to put tick in FS00 of said GLs and we want to save it,following errors shown in FS00:
You cannot change the open item management setting; (see long text)
Message no. FH087
Diagnosis
This account does not balance to zero.
System Response
You cannot switch the open item management specification on or off with this transaction.
Procedure
If you want to switch this function on retroactively for a certain account, you should create a new account with the correct setting and use this to make a transfer posting of existing items.
If you want to switch off the open item management function retroactively for an account, you must first clear all the postings currently on this account. You cannot make any changes to the account management method until this is done.
Please advise.
Regards,
Samar

Keys are shown instead of blank text

Having a problem in our production system. The report is showing Key values for the Blank text. If there is a text value, it is showing correctly.
Problem is coming only in production.
Appreciate any suggesations

Hi,
Just check which text is displayed (Short / Medium /Large). Check the same in Business Explorere tab of Info object and in Qiery prooerties of Info object in query designer.
I guess you have written routine on some other text type and displaying somthing else. Confirm the same by checking it in your text table.
I hope it will help.
Thanks,
S

How can I show the last amend date of the .rpt file on my report?

I want to show the last amendment date of the .rpt file on my report.
Modification date and time refer to the actual report rather than the .rpt file.
Does anyone have any suggestions? I am using version 11.2.
Thanks,
Anne-Marie

annemarier,
Have you tried the "Modification Date" or "Modification Time" fields located under the Special Fields section of the Field Explorer?
I've never used them, but they seem like good candidates.
Jason

I down loaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you

I downloaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you.

Hi- apparently I also had a similar moment of madness and thought that 'freeride games' would be fun. Well, so much for that! It added a ton of things to my tool bar, I would like to uninstall it, any suggestions for this one?
thanks :)

How to populate null values as blank in cell

Hi All,
I have an query i have data like blow
qtr
data
1Q-4Q 2009
4,069,379
1Q-4Q 2010
3,979,490
and i want result like below
1Q-4Q 2009
4,069,379
% Change
-2%
1Q-4Q 2010
3,979,490
for % age change i have applied the previous function
formula is (data/previous(data)) -1*100
but is coming like below
% Change
0%
1Q-4Q 2009
4,069,379
% Change
-2%
1Q-4Q 2010
3,979,490
for the 1 column i am getting 0% age due to i applied previous function but i don't have data for 2008
so i am trying not to populate 0% for the % change before 2009
I have checked with null value
If (IsNull(Previous [data])) then "" else ([data]/previous[data]) -1*100
so it is populating blanck value but i can not formatting the values as %age
please suggest
how can i solve this issue please advice
Thanks in advance
Ranjeet

Change your formula to be:
=If(IsNull(Previous([data])=0 then ([data]/previous([data])-1 * 100
You can ignore the else part and it will leave the null cell as blank and you can still use your number format.

Keynote data labels, can I show category names instead of data values?

I'd like to recreate the chart below in Keynote. The chart below is an excel line chart with the lines removed. In excel I can opt to show category names instead of values for the data labels. Can I do this in Keynote?

You can select member name or alias or both in the Dimension property while creating the form.
It is in the same window as explained earlier, you need to just select both the Member and its Aliase to be displayed on the form.
Thanks,
Ravi

TS2755 why is Messages now showing phone numbers instead of contact names. any ideas?

why is Messages now showing phone numbers instead of contact names. any ideas?

Check to see if you have contacts in your Contacts app. This is something that can happen sometimes, and is usually cured by resetting the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. No data will be lost.

IOS 5.0.1 messages show phone number instead of names

after the iOS 5.0.1 update, all my incoming and outgoing messages show phone number instead of names even though i have them in my contacts.
i tried deleting previous messages, and restarting a new outoging msg to a specific number but when i start a new msg, after i add the contact, and i send it, it'll show the number instead of the person from my contact.
anyone else having this issue and any possible solutions?
also the number show up as +1 (951) XXX - XXXX
+1 (area code) then the number.... instead of the name of the person in my contact.

i went to the apple store and the tech told me the following:
make sure you backup your photos, contacts, etc.
the problem she said is due to a corrupt file for some iphones4s.
1) sync your iphone with itunes
2) do a restore and restore with a "new phone" instead of from backup
3) your phone will be reset, but you'll have all your apps.
after doing all this, your contacts and message should sync up.
hope this helps.

Showing 0 or Null instead of blank in rpt?

Similar Messages

Maybe you are looking for