Shutdown startup of oracle vm
Hi experts
I am new to VM
Could you let me know the shutdown startup process for oracle vm manager/server on windows and linux
thanks
Hi,
Not sure precisely what you are after here, but....VM Server is your xen based hypervisor that hosts your guest virtual machines. VM manager is the web based tool you use to mange your guests and to some extent you VM Server.
In my config, I have VM Server running on a machine - it installs as the only OS. In this I have two guest machines installed.
My VM manager is installed in a OEL5 guest on virtualbox.
You can start the VM Manager independently of the Server if the manager isn't installed on the Server. Basically it will show the status of all know servers and guests; in my setup, I have to boot the VM Server manually and then I can connect to it from the VM manager and start / stop the guests
This concepts are clearly shown in the VM v3.x manual.
Similar Messages
-
SAP Shutdown Necessary During Oracle Backup via BRBACKUP ?
Hi,
Is it necessary to shutdown SAP before backing up the Oracle database via BRBACKUP ?
The BRBACKUP will run cold db backup.
What's the windows script to shutdown & startup SAP v6 ?
TIA !
DLHi Desmond,
That is depends upon the backup type you are selecting.
If you are going to take a cold backup brbackup will shutdowns the database and takes backup.
If you are going for a online backup it will take backup without sutting down database.
And here no need to shutdown database manually, brbackup shutdowns database and takes backup.
I didn't understand your second query, what is the script?
Regards
Nick Loy -
DATABASE SHUTDOWN 후 STARTUP시 ORA-7445가 발생하면서 OS PROMPT로 빠짐
제품 : ORACLE SERVER
작성날짜 : 2002-04-10
DATABASE SHUTDOWN 후 STARTUP시 ORA-7445가 발생하면서 OS PROMPT로 빠짐
=====================================================================
Server Platform : Sparc Sunw Ultra Enterprise 10000
(CPU 44개, Main Memory 9 Megabytes)
ORACLE RDBMS 7.3.3.4
ORACLE PARALLEL SERVER 환경
Sun Cluster Volume Manager 2.0
DB size : 약 1.2 Terabytes (=1200 Gigabytes)
관련 TAR : 9168089.7
조치 내역 :
1. init.ora에 다음의 event와 hidden parameter를 설정
1) event="10210 trace name context forever, level 10"
(Data Block Integrity를 check, Refer to Note 21184.1)
2) event="10211 trace name context forever, level 10"
(Data Block Integrity를 check, Refer to Note 21185.1
3) dbblock_cache_protect = true (Refer to note18144.1)
corrupt된 block이 memory에 load되는 것을 방지
2. Startup mount 후 recover database를 실행
ORA-600[6593] [26]발생 - Detection of block corruption
3. alter database open 실행
ORA-1578 file#88 block #172628 발생 하였으나
ORA-7445 없이 open됨
(문제가 되는 특정 테이블과 데이타 블럭 발견)
4. 위의 file block에 data를 확인하기 위하여 block dump를 함
"Alter session set events 'immediate trace name
blockdump level xxxxx"
( xxxxx는 Data Block Address 값의 decimal 값)
- Block dump에 있는 hexa값을 ascii로 변환
5. corrupt된 block을 제외한 data를 recover하기 위하여 새로운
tablespace를 생성 후 다음 실행.
"Insert into (TABLEA) select * from (TABLEB)
where index_column > ' '
and rowid not like 'corrupt된 row의 rowid들';"
(TABLEA는 corrupt되지 않은 row들을 제외한 나머지 row들을
포함할 새로운 테이블이고, TABLEB는 corrupt된 row들을 갖고
있었던 기존의 테이블)
6. 새로 생성한 테이블의 데이타 확인한 후 기존의 corrupt된
테이블 drop시킴
7. 새 테이블을 rename하여 기존의 테이블 이름과 같게 함. -
Slow Shutdown & Startup on MacBookPro OS ML 10.8.2
I have faced slow shutdown & startup on my MacBook Pro Late 2011 , OS X Mountain Lion 10.8.2 for a while.
I have done searching for solution and had tried some but no luck.
Could someone please help.
Thanks!
Below are the message from console
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 com.apple.launchd[1] (com.apple.ShareKitHelper[258]): Exited: Killed: 9
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] (com.apple.PackageKit.InstallStatus[394]): Exited: Terminated: 15
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] (com.apple.PackageKit.InstallStatus): Throttling respawn: Will start in 10 seconds
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] ([0x0-0x11011].com.apple.inputmethod.ironwood[203]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=143
Dec 24 23:07:28 --- last message repeated 1 time ---
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.talagent[159]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=243
Dec 24 23:07:28 MacBook-Pro.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=41995 Died
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=159
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=100
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] ([0x0-0x1a01a].com.apple.AppleSpell[235]): Exited: Terminated: 15
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.UserEventAgent-Aqua[149]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.storeagent[255]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[239]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] ([0x0-0xc00c].com.apple.iTunesHelper[185]): Exited with code: 1
Dec 24 23:07:28 MacBook-Pro.local WindowServer[101]: CGXGetConnectionProperty: Invalid connection 38659
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 MacBook-Pro.local loginwindow[48]: DEAD_PROCESS: 48 console
Dec 24 23:07:28 MacBook-Pro.local airportd[395]: _doAutoJoin: Already associated to “Internet_Mobility”. Bailing on auto-join.
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=131
Dec 24 23:07:28 MacBook-Pro.local WindowServer[101]: CGXGetConnectionProperty: Invalid connection 38659
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 MacBook-Pro.local shutdown[396]: halt by Keant:
Dec 24 23:07:28 MacBook-Pro.local shutdown[396]: SHUTDOWN_TIME: 1356361648 592277This fixed mine
> sys pref
>network
>Advanced
> DNS
check DNS numbers are correct, mine was showing the router and greyed out so I added my IP specific numbers
>Restart (not sure if you need this step but I did it)
Page loading improved significantly from very slow to acceptable on some to blistering fast in others
AND emails just flew out really quickly
Also make sure you have the right ports for your IP because I had been given an alternate one to try and that upset the incoming messages
>Mail
>preferences
> advanced
> port (you can find this by searching your the help section of your IP) -
Shutdown/Startup database from java
Hi,
I need to execute shutdown/ startup database commands from a java application. I have tried wrapping these in sql / sh file using Runtime.getRuntime().exec("z:\\sql\\shut.sql"), but keep getting:
java.io.IOException: CreateProcess
any ideas ?
thanks,
DaphnaHi,
I don't see why the 11g Drivers won't work for earlier releases of the DB as long as you follow the steps in the documentation. Have you tried it? -
SAPConsole tasks in shutdown & startup
Hi,
We are going through an upgrade process and about to go live, can some one tell about SAPConsole tasks in shutdown & startup checklists like.
1) What needs to be done.
2) When it needs to be done. (Before, shutdown, reconnect, initial checks, business validation, after.)
3) Dependencies on other tasks.
If there are detailed how-to instructions, please let me know.
Thanks,
Mikedone...no help needed.
Thanks -
Power Shutdown/startup Process
We are going thru building power maintenance activity and my question is, is there any Cisco recommened or process or practicse for shutdown/startup the Telepresence devices and VCS, TCS, MUC.
Hi Mahesh,
We need to follow standard procedure as mentioned in the admin guides, like for VCS it is (Maintenance > Restart and then click Restart System )
HTH
Manish -
Automatic startup/shutdown script - 3 Oracle Home
Hi All,
We have a server which has 3 Oracle Home - 8i/9i/10g.
So i am confused about configuring automatic startup/shutdown scripts.
Can you guys please let me know how to setup automatic startup/shutdown for these multiple Oracle Homes.
Thanks,
Kumar.Bellow is a HP-UX script that can help. Create three scripts like oracle8, oracle9, oracle10 with correct path values. and than decide the runlevels and create soft links for the scripts you created, for example;
Under /sbin/rc3.d
ln -s /sbin/init.d/oracle10 S999oracle10
Under /sbin/rc1.d and /sbin/rc2.d
ln -s /sbin/init.d/oracle10 C9oracle10
AUTOMATIC STARTUP/SHUTDOWN SCRIPT
$vi /sbin/init.d/oracle10
#!/sbin/sh
# NOTE: This script is not configurable! Any changes made to this
# scipt will be overwritten when you upgrade to the next
# release of HP-UX.
# WARNING: Changing this script in any way may lead to a system that
# is unbootable. Do not modify this script.
# NOTE:
# For ORACLE:
PATH=/usr/sbin:/usr/bin:/sbin
export PATH
ORA_HOME="/oracle/app/oracle/product/10.2.0"
ORA_OWNR="oracle"
rval=0
set_return() {
x=$?
if [ $x -ne 0 ]; then
echo "EXIT CODE: $x"
rval=1
fi
case $1 in
start)
# Oracle listener and instance startup
echo -n "Starting Oracle: "
su - $ORA_OWNR -c "$ORA_HOME/bin/dbstart /oracle/app/oracle/product/10.2.0"
echo "OK DB started"
stop)
# Oracle listener and instance shutdown
echo -n "Shutdown Oracle: "
su - $ORA_OWNR -c "$ORA_HOME/bin/dbshut /oracle/app/oracle/product/10.2.0"
echo "OK DB shutdown"
reload|restart)
$0 stop
$0 start
echo "usage: $0 {start|stop}"
esac
exit $rval -
Oracle Shutdown/Startup Batch
I need to create a batch file where I can shutdown and startup Oracle 10g database on Windows Server 2003.
Is there any reason why you cannot use the services in Windows?
Find the service:
sc query | findstr Oracle
Stop the service:
sc stop <nameOfService>
To see the status:
sc query <nameOfService>
Start the service:
sc start <nameOfService>
You can also see the status in services (services.msc). -
Instance startup / shutdown (Solaris 9 Oracle 9i)
Morning Guys, How was the weekend? Hope everybody enjoyed.
I have 2 instances running in one machine. I have just performed a shutdown but only 1 intance is down the other one is still running, how do I shutdown the other one as well. The same goes for Startup can I perform the startup for both of the instances seperately.
Thank you.Hi,
Are the 2 instances running on 2 databases?
if yes simply connect to each database by user sys@service_name and shut it down.
conn sys/sys_pass@service_name1 as sysdba
shutdown immediate;
conn sys/sys_pass@service_name2 as sysdba
shutdown immediate;
Regards; -
Hi,
I wrote a procedure to be run before reinstalling a database. As I am not interested in rolling back, or waiting for transactions to finish, I am using SHUTDOWN ABORT to drop users. Everything works well in ORACLE 9i but it cannot restart in 10g - error:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
The procedure looks like:
SHUTDOWN ABORT
STARTUP RESTRICT
declare
cursor cnt_usr is
Select username from dba_users where username in (....some user names);
str_cmd varchar2(400):='';
begin
FOR usr IN cnt_usr LOOP
BEGIN
str_cmd := 'DROP USER '|| usr.username || ' CASCADE ' ;
dbms_output.put_line ('Executing: '|| str_cmd);
EXECUTE IMMEDIATE str_cmd;
EXCEPTION
WHEN OTHERS THEN str_cmd := ' ';
END;
END LOOP;
end;
ALTER SYSTEM DISABLE RESTRICTED SESSION;
exit;
Any idea what may cause the error?
Thank you
Dan> You do know that Abort means to kill the database.
Incorrect. It simply means that the database is shutdown in an inconsistent state - i.e. with "open" transactions and thus "dirty" data.
However, Oracle is designed as a very robust database and this is not a problem. It simply gets the database into a consistent state again on the next startup.
The risk is that something or someone interferes (mucks up) Oracle data files before the next db start - without the redo logs for example, the instance will have a hard time trying to recover the database and get it into a consistent state.
The danger is thus not Oracle, but the Idiot Factor one tends to get with cowboy-type administrators.
What is questionable though is the OP's script that requires the database to be shutdown and started up for a series of drop schemas. That is using a Very Large Hammer to drive in a Very Small Nail. It is a total overkill - not too mention impacting database availability.. And I do not think that our environment is so special/unique that it the exception to measure Oracle instance uptime in 1000's of hours. -
Automatic Startup in Oracle 10.2.02 on Solaris 10 X86
I have create the /etc/init.d/oratab from the sample of
Automating Database Startup and Shutdown on Other Operating Systems
by following script:
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
export ORACLE_HOME PATH
$ORACLE_HOME/bin/dbstart $ORACLE_HOME
But I got the ERROR log
SQL> ERROR:
ORA-12546: TNS:permission denied
SQL> ORA-12546: TNS:permission denied
SQL>
from $ORACLE_HOME/startup.log
What's Wrong with the dbora script ?$ORACLE_HOME/bin/dbstart $ORACLE_HOME
$ORACLE_HOME/bin/dbstart will be sufficient, script will read the oratab file (on Solaris usual location of oratab is in /var/opt/oracle) and starts all SID that have Y flag set.
To "user52":
check ur privs on folder;
be sure the permissions are 777.This is not good approach from security point of view, really - 755 is fine and sufficient. -
Dear all,
10.2.0.3 on Solaris 10.
When shutting down the database, shutdown hangs after database mounted as you can see below
SQL> startup
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2133800 bytes
Variable Size 435843288 bytes
Database Buffers 624951296 bytes
Redo Buffers 10813440 bytes
Database mounted.In one more session, I checked the alert log
Fri Jan 7 10:13:16 2011
Incremental checkpoint up to RBA [0x417a.3.0], current log tail at RBA [0x417a.87.0]
Fri Jan 7 10:13:16 2011
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=36, OS id=15146
Fri Jan 7 10:13:19 2011
Completed: ALTER DATABASE OPEN
^C
bash-3.00$
bash-3.00$
bash-3.00$
bash-3.00$
bash-3.00$ sqlplus "/ as sysdba"
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Jan 7 10:16:28 2011
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL>
SQL> select open_mode from v$database;
OPEN_MODE
READ WRITEAny idea ?.
KaiThere is no error message . Anyway alert log
Fri Jan 7 10:13:08 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =88
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
_trace_files_public = TRUE
processes = 400
sessions = 800
timed_statistics = TRUE
shared_pool_size = 419430400
shared_pool_reserved_size= 41943040
sga_target = 1073741824
control_files = /erp/u01/medh/db/apps_st/data/cntrl01.dbf, /erp/u01/medh/db/apps_st/data/cntrl02.dbf, /erp/u01/medh/db/apps_st/data/cnt
rl03.dbf
db_block_checksum = TRUE
log_archive_dest = /oracle/arch/medh_ARCH
log_archive_format = medh%t_%s_%r.arc
log_buffer = 10485760
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = AUTO
undo_tablespace = APPS_UNDOTS1
db_block_checking = FALSE
session_cached_cursors = 500
utl_file_dir = /usr/tmp, /usr/tmp, /erp/u01/medh/db/tech_st/10.2.0/appsutil/outbound/medh_sed04, /usr/tmp
plsql_native_library_dir = /erp/u01/medh/db/tech_st/10.2.0/plsql/nativelib
plsql_native_library_subdir_count= 149
plsql_code_type = INTERPRETED
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = EXACT
parallel_min_servers = 0
parallel_max_servers = 8
background_dump_dest = /erp/u01/medh/db/tech_st/10.2.0/admin/medh_sed04/bdump
user_dump_dest = /erp/u01/medh/db/tech_st/10.2.0/admin/medh_sed04/udump
max_dump_file_size = 20480
core_dump_dest = /erp/u01/medh/db/tech_st/10.2.0/admin/medh_sed04/cdump
db_name = medh
open_cursors = 600
ifile = /erp/u01/medh/db/tech_st/10.2.0/dbs/medh_sed04_ifile.ora
_sort_elimination_cost_ratio= 5
_b_tree_bitmap_plans = FALSE
_fast_full_scan_enabled = FALSE
_sqlexec_progression_cost= 2147483647
_like_with_bind_as_equality= TRUE
pga_aggregate_target = 1073741824
workarea_size_policy = AUTO
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4194304
PMON started with pid=2, OS id=12494
PSP0 started with pid=4, OS id=12496
MMAN started with pid=6, OS id=12499
DBW0 started with pid=8, OS id=12511
DBW1 started with pid=3, OS id=12544
DBW2 started with pid=10, OS id=12574
LGWR started with pid=5, OS id=12604
CKPT started with pid=12, OS id=12628
SMON started with pid=14, OS id=12653
RECO started with pid=16, OS id=12680
CJQ0 started with pid=18, OS id=12712
MMON started with pid=20, OS id=12738
MMNL started with pid=22, OS id=12761
Fri Jan 7 10:13:10 2011
ALTER DATABASE MOUNT
Fri Jan 7 10:13:14 2011
Setting recovery target incarnation to 2
Fri Jan 7 10:13:14 2011
Successful mount of redo thread 1, with mount id 3947812854
Fri Jan 7 10:13:14 2011
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Jan 7 10:13:15 2011
ALTER DATABASE OPEN
Fri Jan 7 10:13:15 2011
Beginning crash recovery of 1 threads
parallel recovery started with 8 processes
Fri Jan 7 10:13:15 2011
Started redo scan
Fri Jan 7 10:13:15 2011
Completed redo scan
0 redo blocks read, 0 data blocks need recovery
Fri Jan 7 10:13:15 2011
Started redo application at
Thread 1: logseq 16761, block 30591, scn 30945234899
Fri Jan 7 10:13:15 2011
Recovery of Online Redo Log: Thread 1 Group 2 Seq 16761 Reading mem 0
Mem# 0: /erp/u01/medh/db/apps_st/data/log02b.rdo
Mem# 1: /erp/u01/medh/db/apps_st/data/log02a.rdo
Fri Jan 7 10:13:15 2011
Completed redo application
Fri Jan 7 10:13:15 2011
Completed crash recovery at
Thread 1: logseq 16761, block 30591, scn 30945254900
0 data blocks read, 0 data blocks written, 0 redo blocks read
Fri Jan 7 10:13:15 2011
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=34, OS id=14889
Fri Jan 7 10:13:15 2011
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=15, OS id=14921
Fri Jan 7 10:13:15 2011
Thread 1 advanced to log sequence 16762
Thread 1 opened at log sequence 16762
Current log# 3 seq# 16762 mem# 0: /erp/u01/medh/db/apps_st/data/log03b.rdo
Current log# 3 seq# 16762 mem# 1: /erp/u01/medh/db/apps_st/data/log03a.rdo
Successful open of redo thread 1
Fri Jan 7 10:13:15 2011
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jan 7 10:13:15 2011
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Fri Jan 7 10:13:15 2011
ARC1: Becoming the heartbeat ARCH
Fri Jan 7 10:13:15 2011
SMON: enabling cache recovery
Fri Jan 7 10:13:16 2011
Successfully onlined Undo Tablespace 1.
Fri Jan 7 10:13:16 2011
SMON: enabling tx recovery
Fri Jan 7 10:13:16 2011
Database Characterset is AR8MSWIN1256
Fri Jan 7 10:13:16 2011
Incremental checkpoint up to RBA [0x417a.3.0], current log tail at RBA [0x417a.87.0]
Fri Jan 7 10:13:16 2011
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=36, OS id=15146
Fri Jan 7 10:13:19 2011
Completed: ALTER DATABASE OPEN -
ORA-00600 when shutdown in an Oracle 10G Database
Each time we shutdown the database it raises an ORA 600 error.
We are using ASM, the databases (+ASM, "mercap") startup clean, not when shutdown.
Regards,
T.Justin,
Thanks very much for the tip!
Do you know if Oracle 10g has any kind of built-in tool for editing data? I have heard of "The Vault", but that appears to be a tool for administering database users, reports, etc. I am looking for some kind of tool that shows the data in a grid layout (like Microsoft Excel) and allows someone to edit and save data in that grid. A web-based tool would be best, but a desktop tool (especially if it's already part of Oracle 10g) would also be good.
Thanks again,
Rachel -
AURORA$SERVER$SHUTDOWN/Startup err
Background: oracle 8.1.7(DB)
Application developed in J2EE
Hi
1)I just want to know who calls these 2 triggers
AURORA$SERVER$SHUTDOWN
AURORA$SERVER$STARTUP
After some digging up I have found these triggers call dbms_java.serverstartup and shutdown procedure, which internally call the 2 java classes:
PROCEDURE server_startup as language java name
'oracle.aurora.rdbms.Server.serverStartup()' ;
PROCEDURE server_shutdown as language java name
'oracle.aurora.rdbms.Server.serverShutdown()' ;
2)where can I find the classes,so that I can see what exactly they are doing.
3) Any doc to find out the necessary configuration for the oracle db(8.1.7) if app is developed in J2EE?!
Thanks in advance
MadhusriMadhursi,
Are you saying that you have no choice but to use the Oracle database-embedded J2EE application server? Well then, I guess the "luck" part is the only part of my post that will help you.
Would you continue watching a TV where only the sound works (and no picture)?
Would you continue driving a car that has only three wheels (and is missing the fourth)?
Oracle has admitted that the database embedded J2EE application server does not work. Why do you persist in trying to use it?
Good Luck,
Avi.
Maybe you are looking for
-
File Transfer non-unicode - unicode via client
Hello. I downloaded a binary file from a SAP 4.0 system to my client (win2k) with OPEN DATASET (to read the file on the app server) and WS_DOWNLOAD (to save it to the client). Now i want to upload this file from my client to a 6.40 unicode system. Th
-
Finder quit unexpectedly and doesn't work even after typing in command in the terminal.
This is not letting me do my work and finder doesn't stop quitting. The computer crashed while i was using it and then finder started quitting on restarting. MacBook Pro Retina 2014 running 10.9.4. this is the message: Process: Finder [18377]
-
Hi Guys, If I put my database in backup mode and perform the backup (hotbackup/online) of the database. When I need to do restoration, do I need any archive logs at all? (not necessary to recover up to point in time) Can i just restore the datafiles
-
How can I send my entire mix to Outputs 1-2 AND Outputs 3-4.
I want to use 3-4 for my headphones, but have the same mix on it then 1-2. I do not want to create an Aux-bus-send for every single channel strip. I guess there must be an easy solution for this...
-
PA & Recruitment correspondance
Hi frdiends, I have to create letters through word processing but I don't have any idea on this issue If any one knows about this could u please let me know the process. Your help must be required since it is very urgent. Awaiting your favorble reply