Signal not transmitted correctly at high IQ rate

Hi guys,
I am working with a USRP 2940 R which is on PCIe. I have to transmit an array of bits on one shot(somewhere at 6500 bits)
at a baud rate of 19200. The carrier frequency is 434.64. For this USRP the minimum IQ rate is ~39k so i set it to 39k and then i calculate the number of samples / symbol by : IQ rate / 19200(symbol rate) which results 22. With this settings my telegrams (which are encoded as ASK OOK with modulation toolkit) are not always recognised by my receiver. The telegram can be seen on the osciloscope quite nice but the behaviour is not allways the same.
The problem is the following: when i try to increase the symbol rate(to have a more acurate signal) i need also to increase the IQ rate BUT for bigger IQ rates my signal is not sent correctly, there are a lot of brakes and inconsistencies.
Why is the signal sent incorect with bigger IQ rates(ex: 1M). Also the baud rate is no longer the same for biger IQ rates? Why? since i keep the formula
symbol rate X baud rate = IQ rate?
Thanks

Dear All,
i have NI USRP 2940R i.e x310 connected to machine running Windows 7 on LabVIEW Communication system Design suite via SFP port 0. I've reprogrammed the device with jtag USB via impact Xilinx bit file
also by CMD
C:\Program Files (x86)\National Instruments\NI-USRP\utilities>usrp_x3xx_fpga_bur
ner --addr=192.168.10.2 --fpga-path C:\usrp_x310_fpga_HGS.bit
Win32; Microsoft Visual C++ version 10.0; Boost_105000; UHD_003.007.001-234-g52c
71523
A runtime or configuration error occurred.
Code: 2410
Details: LookupError: Path not found in tree: /mboards/0/dboards/A/rx_frontends/0/sensors/lo_locked
Attempting to find X3x0 with IP address: 192.168.10.2
UHD Warning:
X300 unknown product code in EEPROM: 2104
UHD Warning:
X300 unknown product code in EEPROM: 2104
Found (HGS).
Burning image: C:\usrp_x310_fpga_HGS.bit
Progress: 100% (121/121 sectors)
Attempting to find device...
UHD Warning:
X300 unknown product code in EEPROM: 2104
UHD Warning:
X300 unknown product code in EEPROM: 2104
found!
Successfully burned FPGA image!
but i am getting these warning
x300 is not defined
also the tuned frequency is 000000MHz instead of have having a set target frequency.
usrp_x3xx_fpga_burner --addr=192.168.10.2 --fpga-path /home/XXXXXX/Downloads/uhd-images_003.008.001-release/share/uhd/images/usrp_x310_fpga_HGS.bit
Attempting to find device...
UHD Warning:
X300 unknown product code in EEPROM: 2104
UHD Warning:
X300 unknown product code in EEPROM: 2104
found!
Successfully burned FPGA image!
UHD Warning:
Tune Request: 802.500000 MHz
The requested RX frequency is outside of the system range, and has been clipped:
Target Frequency: 802.500000 MHz
Clipped Target Frequency: 0.000000 MHz
Successfully tuned to 0.000000 MHz
Attachments:
sadas.png ‏126 KB
nnjj.png ‏83 KB
uhuhuh.png ‏41 KB

Similar Messages

Management studio dialogs not displayed correct in high resolution

I am using a Lenovo Yoga2 with 3200x1800 screen resolution, and some dialog boxes are not displayed correct, like the Select backup file dialog that doesn't display directory and the file list. Is there any fix for this?

I'm having the same issue. Let me try to elaborate a little, providing you with more details.
Laptop, Dell Precision M3800
Resolution, 3200x1800 (getting more common on new high-end laptops with 15+ inches)
OS, Windows 8.1
Application, SSMS aka SQL Server Management Studio - version 2014 (earlier version has same issue)
SQL Server Engine irrelevant (tested with 2014 and below - all the same)
I understand you want to see a screenshot, but really, it doesn't make sense as you won't be able to reproduce the error if you are watching on e.g. a FullHD screen. therefore, I've taken a screenshot and resized it to a FullHD size so you get a better feel
of the issue - however, I have to mention text will look a lot more crisp on a 3200x1800 screen (that's kind of why you want a screen with high PPI). That said, it's still way too small to look at.
If you view below image on a 15.4 inch screen with FullHD, you get a feel of how I work with SSMS today.
http: // i.imgur.com / TwOmzjr.png (remove spaces)

Norwegian password not transmitted corectly.

Hi
Is there a fix for passwords not transmitting correctly from Norwegian keyboard?
My admin password is complex, and I am not able to remotly log in to my client computers!
Best regards
S.H

If you need the MSI, you can download it from http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Is it possible to detect low frequency signals with a high sampling rate?

Hello everyone,
I'm having an issue detecting low frequency signals with a high sampling rate. Shouldn't I be able to detect the frequencies as long as the sampling rate is at least 2 times the highest frequency I will measure? The frequency range I am measuring is 5-25 Hz, and I use Extract Single Tone.vi to measure the frequency. The sampling setting I am using is 2 samples at 10 kHz. Is there a method I can use to make this work?
Attached is the vi.
Attachments:
frequencytest.vi ‏21 KB

You are sampling at 10Ks/S, but only taking two samples. What do you expect to see? If your signals are binary (On or Off) you would only see either an on or an off, or if the rise/fall time was fast and you were Extremely lucky, one of each. If you want to see a waveform you have to sample for at least the period of a waveform. So you should take samples for at least 0.2 seconds to capture an entire waveform at 5Hz, ideally longer. Think of looking at a tide change at a dock. If you want to see the entire tide change you will probably have to measure repeatedly over 24 hours, not just run out on the dock, measure the height twice and leave. That wouldn't tell you anything other than at that precise moment the tide height was X, but not that it was at high tide, low tide, in between, etc.
I type too slowly, I see that a more technical answer has been given, so mine will be the philosophical one!
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

IPod not playing re-ripped tunes with higher bit-rates

Since I got my iPod and have more storage I have been slowly re-ripping some of some tunes at a higher bit rate. iTunes doesn't appear to try to sync these songs and re-upload them to the iPod.
What happens is that the song stops playing part-way through the song. My guess is that it is due to the file size of the old (lower) bit-rate, as if it still thinks the EOF is at the same spot even though the file is now larger. It's almost as if the index doesn't get updated properly somehow.
I've tried deleting all the songs on the iPod and even doing a restore, but that doesn't always fix it. Some songs do it, some don't.
I know the rips are good because I can play them all the way through with either iTunes or Media Player.
Any help on getting it to sync them properly?

I assume that I have to re-rip the songs at the higher bit rate, unless there is Is there an easy way to do that without re-ripping them.
Assuming you want the higher audio quality (and not just a puffed up version of the same low quality track) you will have to re-rip from the CDs.
Also, what happens to the lower bit rate songs in my playlists, especially if I delete the lower bit rate versions from my library?
Under certain conditions, iTunes will recognize the CD and ask you if you want to replace the existing versions. Say yes, and the rip process will automatically do the replace.
In case it does not ask, just go ahead and rip, and then do the replacements manually.

Windows not scaling dpiAware programs correctly on high DPI screens

I just upgraded to a new notebook with a high dpi screen (3200x1800)..
In the standard desktop (not modern), several programs do not display correctly- specifically Adobe programs, Sony Vegas, Sorenson Squeeze, etc..
The type and fonts for the menus etc are scaled properly, but the UI icons are extremely tiny.
See here.. The red boxed areas are what size the icons SHOULD be:
http://tinypic.com/r/nb82l5/8
If I edit the manifest for each .exe and change
dpiAware to FALSE, everything scales fine but is blurry (sections inside red box from link above)
If dpiAware is already true in the program, why isn't windows scaling the program interface icons correctly?

Hi,
Please check and uncheck the following option to see the result.
Also,please use a external display device to test it.
Regards,
Kelvin Xu
TechNet Community Support

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

Gx620 HDMI higher refresh rates

Hello,
I've bought a Samsung SyncMaster 2233rz to get a lower inputlag and higher refresh rates. GeForce 9600m GT doesn't have a DVI-D port, thus I'm using the HDMI port with a DVI-D adapter as the monitor only has a DVI-D port. I've read you couldn't get a higher than 60hz signal from the graphics card through HDMI for some reason (..it being a mobile card). I'd imagine it has something to do with the bandwidth, but so far I've managed to get atleast 1680x1050 @ 75hz. It stutters sometimes, but quite rarely.
The refresh rate options are very limited as I use Windows 7, which reads the EDID-information from the display. Nvidia control panel registers the connectors as HDMI - HDTV. I've tried editing the EDID-informations and use powerstrip and such programs to get a higher refresh rate, but so far I'm stuck at 75hz. I wouldn't mind lowering the resolution to get atleast 100hz refresh rate, but so far I've had no luck with it. Have any of you managed to get a 100hz refresh rate from gx620 (through the vga-port perhaps)?
BR,
Exa

Quote from: Henry on 03-February-11, 19:15:00
Read this: http://www.ehow.com/about_5067955_refresh-rate-computer.html
Refresh rate is actually a term for analog CRT monitors, not digital monitors.
Hello,
I know how it works on LCD's. That wasn't the question, thanks though.
BR,
Exa
EDIT: I posted about the issue in Nvidias forum, here's the url incase it gets answers
http://forums.nvidia.com/index.php?showtopic=192351

ADSL internet connection, High SNR rates and buffe...

Hi all,
I have the following issues:
Constant speed (but think this is due to IP profile?, Slower than previous.
High SNR rates up and down.
After 5.30pm, Seems that iplayer and smart tv are useless, the wheel is spinning but the hamster is dead scenario.
Here is the stats:
1. Product name: BT Home Hub
2. Serial number: +068340+NQ3
3. Firmware version: Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 05/12/13
4. Board version: BT Hub 4A
5. ADSL uptime: 2 days, 16:53:08
6. Bandwidth: 448 / 4224
7. Data sent/received: 348.9 MB / 4.0 GB
8. Broadband username: [email protected]
9. BT FON: Yes
10. 2.4 GHz Wireless network/SSID: BTHub4-WKP8
11. 2.4 GHz Wireless connections: Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
12. 2.4 GHz Wireless security: WPA and WPA2
13. 2.4 GHz Wireless channel: Automatic / 11
14. 5 GHz Wireless network/SSID: BTHub4-WKP8
15. 5 GHz Wireless connections: Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
16. 5 GHz Wireless security: WPA2
17. 5 GHz Wireless channel: Automatic / 40
18. Firewall: Default
19. MAC Address: 2c:39:96:ae:bc:ce
20. VPI/VCI: 0 / 38
21. Modulation: G.992.1 Annex A
22. Latency type: Interleaved
23. Software variant: -
24. Boot loader:
20:33:35, 16 Nov. ( 74.470000) DSL is up
20:33:33, 16 Nov. ( 73.020000) DSL noise margin: 27.00 dB upstream, 12.10 dB downstream
20:33:33, 16 Nov. ( 72.950000) DSL line rate: 448 Kbps upstream, 4224 Kbps downstream
20:33:06, 16 Nov. ( 45.310000) WAN Auto-?sensing running.
Any help appreciated!
Thanks

Your profile is ok for your conenction speed. You need a faster conenction to get a higher profile so if your noise margin was reduced to 6db which is normal then that would increase your conenction speed giving higher profile and faster download speed
your current connection speed should be enough to stream to the tv
the mods will post a contact us link and reset noise margin to 6db.
After completing the email NOT PM then you join a queue of other customers waiting for mod help. The mods will get back to you in 3/5 working days either by phone or email
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Profit center not picking correctly in PO from sales order

Hi Experts,
Profit center is not picking correctly.. in PO
In material master Profit center is configured as XXXX
We have raised a sales order for the same material with two line items (e.g) 1500 kgs & 1600 kgs and profit center has been changed in the sales order to YYYY
There is one purchase requistion for the same material with two line items
But we have raised two purchase order for each line item in which the same sales order is linked to these two purchase order.
In the first PO , for the first line item in sales order ie., 1500 kgs profit center is picked from the sales order ie, XXXX which is correct but in the second PO, for the second line item in sales order ie., 1600 kgs profit center is picking as YYYY ie which is configured in material master.
What could be reason ? Help in this regard will be highly appreciated.
Thanks in advance
Narayanan

Hi Narayan
Check the Account assignment in the 2nd PO.. Does it have E as Acct Assgn Category?
It should have sales order as the account assignment... If yes, then it must pick up PC from the sales order...
Try to put a deletion flag to this PO and create a new one, if possible... You would come to know if some one has changed the PC
BR,Ajay M

HT4914 I have an iTunes library of some 18k tracks. If I subscribe to iTunes Match, can I delete my library from the pc hard drive and then download my entire collection back at the higher bit rate of 256?

I would like to improve the quality of my iTunes library, most of which were ripped at the old 'higher quality' setting and not lossless.
I would consider subscribing to the iTunes Match programme if I would later be able to download my music back on to my PC at the improved higher bit rate stated.
Is there a problem with this?

In iPhoto, Select All the Photos you want to move... Then goto > File > Export >
Choose the settings as seen here
Click Export and select your External Drive
Best to create a Folder to put them in... and away you go...

Dreamweaver tables not displaying correctly in internet explorer browser, please help!!!!

Could someone please help me with this issue i've been having for almost a year now and can't find any information on getting this fixed, for some reason the features specs and required tables rows are not displaying correctly, the image is out of aligned when viewing the results using the internet explorer browser only, the firefox browser works just as needed but when i try to view the same code in IE the tables are not aligned properly and the text is not margined correctly either, i tried playing around with the css style that i have and no results. Please help me fix this issue so that my page would display in internet explorer just like under Firefox. Below are the pictures of the problem i'm having.
This picture shows how i want it displayed on the internet explorer and firefox browser:
Here is results in firefox browser:
Here is results in internet explorer browser:
As you can see the tables are all messed up, text is not centered properly even if i coded it right.
Here is the coding for this page:
PLEASE HELP ME OUT WITH THIS PROBLEM, I NEED TO FIGURE OUT HOW TO MAKE INTERNET EXPLORER TO DISPLAY THE INFORMATION CORRECTLY JUST LIKE FIREFOX?
<style type="text/css">

</style>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR<td></td>
</tr>
<tr>
<td height="31" align="center" valign="middle" class="number">HPI Item #10620<td width="10"></td>
</tr>
</table>
<table width="925" height="326" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onClick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onClick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onClick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onClick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onClick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onClick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onClick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onClick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" height="124" border="0">
<tr>
<td height="320" class="description"><p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center" class="features">Features:</td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td height="526" class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
<td> </td>
<td class="featurebackground">
<ul>
<li class="featurebackground">Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li class="featurebackground">Transmitter Batteries: 8x AA</li>
<li class="featurebackground">Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
</tr>
</table>
<table width="928" height="621" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/ePaymentMethod.jpg" class="policy"><p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p>
<p> </p></td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="220" background="http://www.ehobbyplanet.com/eBay/Layout/eNormalShipping.jpg" class="policy"><p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td height="104" background="http://www.ehobbyplanet.com/eBay/Layout/eInsurance.jpg" class="policy">We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/eReturns.jpg" class="policy">We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</td>
</tr>
</table>
</body>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
Here is my contact information:
Paul
[email protected]

Try this without the border images and it will work in all browsers with increased text size. That's assuming eBay supports embedded CSS styles (which I'm not convinced they do). Inline styles are safer IMHO.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
h2 {font-size:1.7em; color:#000; margin-top:0em; margin-bottom: 2px;}
ul,li {
font-size:14px;
list-style:disc;
line-height:1.5;
font-family: "Times New Roman", Times, serif;
.description {
font-family: "Times New Roman";
font-size: 16px;
line-height: 1.2;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
border: 4px solid red;
padding: 0 20px 20px 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
line-height: 3em;
.featurebackground {
padding-right: 10px;
border: 4px solid red;
width: 200px;
vertical-align: top;
padding-top: 1em;
.policy {
border: 4px solid red;
margin-top: -2em;
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #000000;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
border: 4px solid red;
.number {
.policy {
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding: 0 20px 20px 20px;
</style>
</head>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR</td><td></td>
</tr>
<tr>
<td align="center" valign="middle" class="number">HPI Item #10620</td><td width="10"></td>
</tr>
</table>
<table width="925" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onclick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onclick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onclick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onclick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onclick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onclick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onclick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onclick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td class="description"><h2>Description</h2>
<p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center"><span class="features">Features:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
</td>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
</td>
<td> </td>
<td class="featurebackground">
<ul>
<li>Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li>Transmitter Batteries: 8x AA</li>
<li>Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
</td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Payment Method </h2>
<p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Shipping & Handling </h2>
<p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Insurance</h2>
<p>We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Returns</h2>
<p>We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</p></td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
That's the best solution I can offer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

What is the "Download All" button at the bottom of my playlist and why when I select it songs begin downloading and take up my storage space? If I don't download them the songs will not play correctly....

I have activated iTunes match and iCloud, now when I go to my Music app and choose me 'best' playlist, I see a button at the bottom of the list that says download all. If I choose this option every song in that playlist begins downloading (near 1,000), this is taking up memory on my phone instead of using the cloud. If i DO NOT download all of the songs they do not play correctly (skipping certain songs, not playing all the way through, etc.) What's this all about and what can I do about it? Why are my songs not just playing through iCloud? I thought that was the point.....

To be honest, you shouldn't need a great 3G service for it to be able to keep up with a song, but if it's a very weak signal then it could be the problem.
Unless you have unlimited 3G then I would recommend using wi-fi anyway, as you could easily run into monthly limits otherwise.
Do you think that it works better with wi-fi than 3G, or just the same? If it is the same then I would have to question whether this is actually your problem.
As to whether you should download songs beforehand, I would say that as a temporary measure it probably makes sense if it's possible as it will download them anyway and that way you get to listen to the music properly. However it does mean that you have to start downloading before you start listening which may be annoying.
I'd be interested to hear whether the performance is better with wi-fi than 3g though. It could be that I'm barking up the wrong tree.

BT Infinity 2 and high ping rate

I am having a problem with my BT Infinity2. I am getting high ping rates some as high as 181 ms. I have download speeds of 15 meg and 8-9 meg upload. This is through the router wired to my computer. I was told that I should be able to get somewhere in the region of 77 meg. This is nowhere near and needs to be sorted out.
It doesn't matter what time of day I do the speed test it is always the same. If I try and play my Football Manager 2012 game online I can't as my connection just kicks me back off the steam server. If I try and watch a programme on Iplayer or ITV player ther programmes are fuzzy, blocking and unwatchable, also with the buffering is beyond a joke.

micksea173 not good and you have my sympathy
Try rebooting both the hub and the modem. Run the BT Speedtester to get your IP Profiles and http://www.speedtest.bbmax.co.uk/ to get an accurate speed test. Pings are very dependant on the site you are measuring a ping of 181 for a server in LA could be quite good! If you know how also run a tracert to bbc.co.uk. Post agin with the results and somebody can make an educated guess as to where the problem lies.

Signal not transmitted correctly at high IQ rate

Similar Messages

Maybe you are looking for