Silent Profile key ( # ) is not working anymore

Hello,
I am using a Nokia 6300. Recently I did a phone software update (to version 5.00), backed all my data up, had afterwards some trouble to get the saved data back on the handset, but it finally worked. Though I still have one small issue. Before the update, when I pressed and held the # key, the phone switched from General to Silent Profile, and back to General if I pressed the key again. This nice feature is now somehow disabled.
Does anybody have the same problem, and would there be someone nice enough to help me out on this one?
Thanks in advance

which keyboard format did you set in the language?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Enter key does not work anymore in address bar after FF update

After the update the Enter key does not work anymore. Neither when I type the url directly, nor when I select it from the history.
In short FF has become unusable. Now I need to install and use a less crappy browser. Extremely sloppy, amateuristic update.

see if this is helpful : go to Tool > Options > Advanced > General tab > Browsing and '''Uncheck''': "Use hardware acceleration when available" .

Keyboard @ key is not working anymore

From the keyboard the "@" key is not working anymore.
I have the Laptop already 6 months and it allways worked fine, what could this be???

which keyboard format did you set in the language?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

TouchPad lock key does not work anymore on Dell XPS L401X

Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
Tinh

Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more.

I installed windows 7, I restarted my computer with the install disk still in and it made me reinstall but my product key would not work anymore.

So I had installed windows 7, but I didn't know how to go back to the os-x so I just turned my computer off then back on but it stayed on windows but asked me to install. I'm guessing it was because the install cd was still in the disk drive. So when i started the installation process again I got to the point where I had to type in my product key but because I had already used it my product key was unavailable. So I'm wondering if there's a way to get my product key to work again. I called microsoft tech support and they told me that I had to talk to someone at apple and I'd like to at all costs avoid paying 50$ to be told to call microsoft.

you didn't read the manual or even look or understand the default keyboard assignments
x = Mac OS X
Option key = boot manager
Apple drivers in Windows includes one just like in OS X System Preferences to handle OS Switcher control panel part of "boot camp" control panel (over used term that tends to mislead and confuse)
http://support.apple.com/kb/HT1533

HCP debugging and profiling does not work anymore

Hi,
starting HCP in debug or profile mode does not work anymore.
Last week I developed a small java app and could debug it on HCP. Today I updated the HCP Tools eclipse plugins and now I can't change the state of the server to debug or profile. Of course the debugger does then not stop at my breakpoints.
Any hints?
Regards Helmut

Hi Alex,
as you can see on the screenshots the option is available. When I start in Debug Mode the state changes to started instead of debugging. Setting breakpoints then has no effect.
1. Start in Debug Mode
2. Server not started in Debug Mode
Regards Helmut

Certain keys are not working

Hi there -
After hearing a repeating noise when opening some applications (can hit ESC to stop) I noticed a change in my keyboard. One letter key does not work anymore, and I get a strange window showing different letters. It looks like a different language. I went back into system preferences, and verified I have English/US selected. One person I asked said they thought I hit the option, command or control key and brought up a different keyboard. Any idea on how to get things back to normal?

I'm not sure how to see if a have a "stuck" key...
Maybe that's why I'm hearing that sound sometimes.
Here's the weird window:

Brightness keys not working anymore and screen frequently flashing black and staying black!

I had my macbook pro in for repair twice last month. They replaced the logic board and had to take the screen off and look at it due to there being a potential crack. Now, when i got the macbook back the first time, after replacing the logic board, everything was fine, the brightness keys did not work at first but a restart fixed the problem. 5 days later i had it back in so they could look at the screen because i thought there was a crack on it, which turned out just to be some debris on the inside! Still had to pay a 50 quid inspection charge!
ever since the macbook has returned from this the brightness keys have had a delayed response in that, when i increase or decrease the brightness it took about 10 seconds for the screen to actually change. This happened everytime.
A few days ago for no reason, the screen started to occasianally flash black. It wasnt a problem at first, but sometimes it flashes back and stays black so i have to restart my computer. Sometimes when returning from sleep it stays black as well. On top of this, the brightness keys have completely stopped working all together now.
My laptop is not in warrenty anymore, it ran out after i got it back the second time. I was too busy with work and i needed to use the laptop so i couldnt really sort anything out.
Is there any policy saying that if the laptop comes back from repair and has new problems not caused by the customer, but by the repairer, then they will fix it free of charge?
Many thanks

nobody can help??

Roaming profile not working anymore

hi
im definitely shure, in a earlier version of ZCM 10.0, the Roaming Profile to the Home directory did work and so, i never checked this since then.
now i updated to 10.3.1 and roaming profile does not work anymore. the local profile gets not copied to the Home-Directory on the server, it doesnt depends, if i have the "Edir Home" set or the real path to the directory.....
where can i start to search for this problem ? i was so shortly to go "productiv".......but no, there is again a delay after 6 Months waiting and testing....:-(
it's so sad ! Zenworks is not that quality product it was.....
Sascha

hi craig
sorry, about not enough informations.....
- no, all clients are only in the E-Dir
- Clients are Windows XP SP2 with Novell Client 4.9 SP2, but tested also higher ones...
- Home-directory is on a Netware 6.5 SP8
- ZCM Server is SLES 10 SP3 without OES
thanks
Sascha
>>> craig wilson<[email protected]> 27.08.2010 17:36 >>>
Are your devices a member of a Windows Domain?
What Client OS?
What type of Server do the Home Directories reside?
On 8/27/2010 11:17 AM, Sascha Oetiker wrote:
> hi
> im definitely shure, in a earlier version of ZCM 10.0, the Roaming
> Profile to the Home directory did work and so, i never checked this
> since then.
> now i updated to 10.3.1 and roaming profile does not work anymore. the
> local profile gets not copied to the Home-Directory on the server, it
> doesnt depends, if i have the "Edir Home" set or the real path to the
> directory.....
> where can i start to search for this problem ? i was so shortly to go
> "productiv".......but no, there is again a delay after 6 Months waiting
> and testing....:-(
> it's so sad ! Zenworks is not that quality product it was.....
> Sascha
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Audio Jack of my HP Envy 4 is not working anymore

Hi all,
I have purchased HP Envy 4 just a 4 months ago and now something worong with its audio jack for headphone and its not working anymore. The hardware profile for this audio jack shows no error but its still not working. Is there anyone who can help me out this issue???
Regards,
This question was solved.
View Solution.

Lets start with you helping us by identifying your notebook completely.
HP has produced and brought to market more than a thousand different models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which specific model you own..
Method #1: If the notebook will boot into Windows, you can retrieve your Product Number by pressing Fn + Esc key.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a Service tag with printed part number and a product name. Please post the p/n (with all alphanumeric characters) here. If you live outside of North America, it helps us if you post the country of purchase. Also post the installed CPU type. (AMD or Intel)
Don't forget to post the name of the installed operating system if you haven't already done that.
If Windows 8 is installed, you can invoke the search charm and type in the word audio and then on the right hand side of the screen click on Settings. On the left hand side of the screen, you should see an option to select Find and fix audio playback problems. Try it to see if it resolves the issue for you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Up and down arrow keys do not work

Hi Guys...I need your help...
Since my arrow keys (only up and down) do not work anymore on my iMac (Mac OS X 10.4.11)...No matter in which application...
I have reset the PRAM since I thought that this may solve the problem without any success...does anyone have an idea how to resolve this problem?
Have I maybe pressed any shortcut by mistake, which can lock these keys?? It is a pain to work without these 2 keys
Thanks in advance for the help

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

Mac os 10.4.10 software update problem -- my mac does not work anymore :(

hello!
i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
My mac problems' driving me crazy!!!

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

Plus sign not working anymore for distribution group

Without our Outlook client it was possible to make a New E-mail, enter a part of the distribution group, pressing control-k to force lookup the group and it was resolved. With the plus sign you can expand the requested ditribution group. Now this is not
working anymore. Does anyone know that there is maybe an option why this do not work anymore?
Within the image you can see that this worked. This is not working anymore.

Hi,
What does "Now this is not working anymore" mean? Does it mean you didn't get the Expand List warning or it didn't expand the distribution group when clicking plus sign?
Does this issue happen to all users and all distribution groups?
If you mean you didn't the Expand List warning, we can try this to get it back:
Open your Registry Editor and browse to HKEY_CURRENT_USER\Software\Microsoft\Office\xx.0\Outlook\Options\General (where xx is the version of your Office.)
Look for and open the PONT_STRING value, you'll see a list of numbers in the Value box. Remove number
13 from the list and test again.
If you mean that clicking the plus sign didn't expand the group, we may try to open Outlook in safe mode and test again. To do this, press Windows key + R to open the Run command, type
outlook /safe and press Enter.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Standard shortcut for "flow" does not work anymore

Hi there :-)
The standard shortcut for setting the flow of a brush or stamp does not work anymore. When using shift + 0-9 nothing happens. It works correctly for the opacity when I use 0-9.
When I turn on the airbrush-mode it's not switching the commands entirely... Flow is still not settable with 0-9 but opacity cannot be set either by shift + 0-9.
I can access the opacity by hitting "enter" and then use the tab to switch to the flow but that's not what I wanna do.
Can anyone help my to find out what happened to These commands? The Shift-keys work fine btw... I'm using them for other commands (in and outside of PS) .
If anyone knows how to change these standard hotkeys let me know as well.
Thnx, Michelle

Which version of photoshop and operating system are you using?

Silent Profile key ( # ) is not working anymore

Similar Messages

Maybe you are looking for