Simple Membership Provider Migration Error
I am trying to publish my website using Windows Azure. I have migrations enabled and I am also using Simple Membership Provider. When I publish the website the Simple Membership tables are created in my database but none of my other tables are created.
I get the error "There is already an object named 'UserProfile' in the database." The migration works properly localy. How can I get the migration to work when publishing?
Hi,
Try to drop all tables created in your Azure database.
You probally pushished your website before enabling migrations, so SimpleMembershipProvider create his tables with a another migration information unknown by your migrations.
By default EF use CreateDatabaseIfNotExists initializer, so if you clear your database normally, EF apply all migrations.
Bests regards,
Similar Messages
-
I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
The Oracle Membership Provider would not allow me to set the minRequiredNonAlphanumericCharacters via the web.config.
When I tried to set the "minRequiredNonAlphanumericCharacters" property for the Oracle Membership file via web.config, I got the following error when running the ASP.net Web Site Administration Tool:
"The specified attribute minRequiredNonAlphanumericCharacters was no recognized. (D:\Documents\CAL\Web\web.config line 112)"Have you tried the 11.1.0.6.20 release? This issue should have been fixed.
Attribute names are case-sensitive. As you are aware, by Microsoft's naming convention that all attribute names are identical to property names except the first letter becomes lower-case. But there is an exception.
Property Name:
MinRequiredNonAlphanumericCharacters
Attribute Name: supposedly
minRequiredNonAlphanumericCharacters
But no!
It's minRequiredNonalphanumericCharacters !
The "A" in "Alphanumeric" becomes "a" as well.
I don't know why Microsoft makes such an exception. But the Membership provider in Oracle Providers for ASP.NET (11.1.0.6.20) is now following this exception.
Message was edited by:
shsu -
Packup - a simple backup/restore/migration script for Pacman
I have seen numerous posts on the forums asking for an easy way to backup and restore installed software for purposes of backup, migration or simply for convenience. Packup attempts to fill this void. Simply put, Packup is an ncurses wrapper for Pacman which provides a simple backup/restore/migration system for Arch. Don't believe me? Try it for yourself!
Mimi wrote:
Ghost1227 wrote:by default it should be $8 not $9... I'd love to know why yours responds differently.
┌─[~]
└─╼ ls -Bl packup-*
-rw-r--r-- 1 julia users 2633 2. Jan 18:22 packup-complete-20090102-1821
┌─[~]
└─╼ ls -Bl packup-* | egrep -v '^d' | awk '{ print $8 }'
18:22
Maybe the problem is a different date format (de_DE.utf8).
┌─[~]
└─╼ ls -Bl --time-style=iso packup-* | egrep -v '^d' | awk '{ print $8 }'
packup-complete-20090102-1821
Good point - added --time-style to the script, should fix that problem...
Mimi wrote:
If i select "Run Yaourt" the program exits, i don't know, maybe the exit status of the if condition (if [ $? = 0 ]) overrides the selection?
┌─[~]
└─╼ if [ $? = 1 ]; then echo abcdef; elif [ $? = 1 ]; then echo fedcba; fi
fedcba
Or is it just me?
I think you miscopied something there...
if [ $? = 1 ]; ... elif [ $? = 1 ]; ...
it's kinda redundant... shouldn't one of those be =0? or =3? i'm not even sure which function you're referencing. -
Multiple installs of causing Data provider internal error (-3000) on Open
Hi,
We have an application written against Oracle ODP 10.1.0.401 that's been deployed out on a web farm working great for some time now, however recently another area has asked to get ODP for 11g installed on that server. The install originally broke our application, but we were able to resolve most of the issues after following all of the appropriate "PATH" reordering and registering appropriate dlls. In fact, we finally got a server completely back up and running both versions with no issues.
Unfortunately, it's a load-balanced server, and while one of the two servers is working correctly, the second seems to be having issues with specific parts of the install. We're trying to fix it on the second server now, and will be doing the same install shortly in our production environments.
I was able to break the error out and create a very simple test app to eliminate as many variables as possible. It appears to be an issue with the driver when we enlist into a Distributed Transaction.
The following code works fine:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase + "Enlist=False");
connection.Open();
While this code does not:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase);
connection.Open();
In both examples, connectionStringBase is Data Source=...;Validate Connection=true;User ID=...;Password=...; (where ... represents masked values). I've also tried "Enlist=True" in case the default was a problem, but it also fails.
The exceptions we're getting on the server happen in the .Open() call. The stack trace is:
[OracleException: Data provider internal error(-3000) [System.String]]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure) +779
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) +41
Oracle.DataAccess.Client.OracleConnection.Open() +3338
Default.Page_Load(Object sender, EventArgs e) in C:\Code\Oracle11gTest\Oracle11gTest\Default.aspx.cs:13
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +43
System.Web.UI.Control.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2604
I've read a few articles on this particular error and found that it's generally considered an ambiguous error with many potential causes, most of which I've been trying to test and rule out. While I don't have direct access to the server, I've been working with someone who does and they have compared registry settings and registered dlls, and have told me that the 2 servers match, and we've already re-installed the 10.1 drivers hoping it would help, but at this point we're stumped. I've read that it's possible that the COM+ install could have become corrupt, but what confuses me is that just prior to the 11g install, everything works great, and after doing no more than an ODP 11g install, it breaks. Do you have any advice or suggestions we could try?
Thanks in advance for any insight you might have!
~JeffIf I read your post correctly that this is a "everything is equal as far as we know, but box A works and box B doesn't" type situation, my first suggestion would be to get Process Explorer from http://sysinternals.com, and compare the loaded modules between the working and non-working servers. You'll probably find that you're not using the software you think you're using, or have mismatched dlls across homes, or something to that effect. Once you figure out what the difference between the two is, correcting it will probably be the easy part.
Hope it helps,
Greg -
SQL Azure Membership Provider.
Hello!
I have an ASP.NET WebForm application that use SqlServerMembershipProvider. I want to upload the application to Windows Azure and Sql Azure.
Now I have a Sql Server 2008 database, and membership tables are part of my application's database.
Can I continue using Sql Server Membership like I've been using until now?I'm after exactly the same thing. Just stuck on what the membership provider settings should be. All the searches online are suggesting ..
<membership defaultProvider="TableStorageMembershipProvider" userIsOnlineTimeWindow="20">
<providers>
<clear/>
<add name="TableStorageMembershipProvider" type="Microsoft.Samples.ServiceHosting.AspProviders.TableStorageMembershipProvider"
description="Membership provider using table storage" applicationName="WebFormAzureStore" />
</providers>
</membership>
..but that results in an error.
Any help would be greatly appreciated. -
MII 14.0 SP4 :Migration error while importing SAP BM Templates
Hi Experts,
I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
There are almost 23 transactions which are not getting imported and the error message for all of them is-
"Unable to migrate transaction Unable to import file
<Name of the Transaction>"
Any first hand experiences will be really helpful for me to proceed further.
Regards,
Muddassar KhanHi All,
Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
Any way thanks for the answer christian libich.
Regards
G.Partheeban -
Data Provider Internal error(-3000): please help!
Hi,
I've a Web Application using Oracle Data Provider 9.2.0.2 to communicate with mu oracle DB.
I'm using the ExecuteNonQuery function to run a SQL statement (it's a select connect by), but after some time, I get the following error:
Data Provider Internal error(-3000)
It seems to happen if the query takes a lot of time.
If I reduce the number of returned rows, I don't get the error anymore.
After some searches through the internet I found that the problem should fixed in the next ODP release, 9.2.0.4: I installed it too, but with no success.
I played with the connection timeout and some other parameters without solving the error.
Someone can help me?
Thanks.
Daniele.I met the same question too.
I list your problem below:
my ODP.net is 9.2.0.4.
code snippet is below:
string constring = "user id=gz;data source=ipas_local;password=gz";
OracleConnection conn = new OracleConnection(constring);
OracleCommand cmd = new OracleCommand(sql,conn);
try
conn.Open();
cmd.ExecuteNonQuery();
catch(Exception ex)
doredirect = false;
lblMessage.Text = ex.ToString();
finally
conn.Close();
I have a Oracle9i DBMS which home_name is OraHome92 in my computer,and have a ODP.NET9.2.0.4 which home_name is ORADOTNET9 deferent from DBMS.
9i DBMS path:D:\oracle\ora92
ODP.NET 9i path:D:\oracle\ODPDotNet
my web app never work before
what's the meaning of "100% & consistently reproducible"?
how to know whether Connection pool is on or off? -
Using Data-Dependent Routing in combination with Membership provider
Hi there!
Currently we have two Web applications running on azure using a single SQL database. We are experiencing problems with performance because we are using only one database. We are investigating some solutions like documentDB and elastic scale.
DocumentDb seems like a really good option for us because it looks like it can be implemented easily and we know just what to do.
With elastic scale on the other hand we have to figure out what our options are. We are using a membership provider for our users to login in one of the two applications. The other web applications does not use a membershipprovider, it does not use a login
system at all.
in the backend of our code we determine a subscription_id for both applications to retrieve tenant data.
I think we have a few options here
1. to keep using the membershipprovider we could create a database just for the login mechanism so we can determine the subscription_id, and with that subscription_id we can use Data-Dependent Routing to retrieve the correct data from the correct shard.
2. We can add extra columns to the Shard Map Manager database (i think i've read that it's not supposed to be used for user data) like username and password so we can login through this database.
Does anyone has better options than the options mentioned before and can anyone give me advise on how we should deal with these issues?
Thanks!Elmar --
The best approach would be to maintain the Membership DB in a separate Azure SQL database. Then you could shard your transaction details across an Elastic Scale set of databases based on the subscription ID. (The Shard Map Manager
database is not designed to be extended with additional columns, and Elastic Scale works by caching that Shard Map data in the client application anyway, and those in-memory structures can't be changed).
You would use an ordinary ADO.Net connection to query membership for a Subscription ID, and then get an appropriate shard-specific connection using the Elastic Scale GetOpenConnectionForKey method, passing the subscription ID retrieved from
the membership query. -
Data provider internal error(-3000) during DataAdapter.Fill
I get this error sporadically.
From other messages on this forum, it seems others are having similar problems. It appears the Oracle staff
is still struggling to identify and fix (or did I miss a post?)
I hope the next release can include some more informative diagnostic error messages. (no judgment implied, just a suggestion).
But I need this to work, so I'm posting my
info as well in hopes it will help.
Sorry for the length, but I think all the detail may be needed to diagnose.
I have been using ODP.Net for weeks without trouble
until recently. I just added a CLOB field to my table yesterday, and
the problem started. I don't know whether that's cause or coincidence.
Possible workarounds I will try:
1) Explicit select of columns rather than select *
2) Retry once on failure after short delay
Below, I'm including the exception message from the ASP.Net page.
It occurs at the same spot in my code, but often
it works fine. Now, an hour later, I cannot repeat the problem.
I've edited the "Source Error" section to
provide more of the code, so you can see the full context.
I've also pasted the stored procedure called so you can see what that is about.
I need this to work, so feel free to contact me if you need further information
to diagnose this in order to fix it.
I go live on March 7, so if I don't get a fix soon and can't find
a workaround, I'll just make a lame error message like "Site is very busy, please try again".
Even though the site is NOT busy. But having them try again seems to work.
And I don't want to tell them why I'm asking them to try again <grin>.
I am thinking of putting a try/catch block and sleeping for a second and then trying one more
time in my code. I'll let you know if that is an effective work-around.
David Kreth Allen
University of Minnesota
Carlson School of Management
[email protected] remove XYZ to send emails
612-625-0386
<WebPageError>
Server Error in '/ScholarshipApplicationWeb' Application.
Data provider internal error(-3000)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: Data provider internal error(-3000)
Source Error:
OracleCommand cmd = new OracleCommand();
cmd.Connection = new OracleConnection(
ApplicationEnvironment.current.database.OracleConnectionString);
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "pkg_batch.get_details";
cmd.Parameters.Add("batch_id",OracleDbType.Int32,
batchId,ParameterDirection.Input);
cmd.Parameters.Add("batchCursor",OracleDbType.RefCursor,
DBNull.Value,ParameterDirection.Output);
cmd.Parameters.Add("majorsCursor",OracleDbType.RefCursor,
DBNull.Value,ParameterDirection.Output);
cmd.Parameters.Add("detailCursor",OracleDbType.RefCursor,
DBNull.Value,ParameterDirection.Output);
OracleDataAdapter da = new OracleDataAdapter(cmd);
DataSet ds = new DataSet("batches");
da.Fill(ds);
DataTable dt = ds.Tables[0];
dt.TableName = "batch";
Source File: C:\Projects\ScholarshipSolution\ScholarshipLibrary\Data\ScholarshipApplicationBatch.cs Line: 329
Stack Trace:
[OracleException: Data provider internal error(-3000)]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, IntPtr opsSqlCtx, Object src, String procedure, String[] args)
Oracle.DataAccess.Client.OracleDataReader.NextResult() +1259
System.Data.Common.DbDataAdapter.FillNextResult(IDataReader dataReader) +98
System.Data.Common.DbDataAdapter.FillFromReader(Object data, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +261
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +129
Oracle.DataAccess.Client.OracleDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +516
Oracle.DataAccess.Client.OracleDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +290
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
CSOM.ScholarshipLibrary.Data.ScholarshipApplicationBatch.getDataById(Int32 batchId) in C:\Projects\ScholarshipSolution\ScholarshipLibrary\Data\ScholarshipApplicationBatch.cs:329
CSOM.ScholarshipLibrary.Data.ScholarshipApplicationBatch.GetById(Int32 batchId) in C:\Projects\ScholarshipSolution\ScholarshipLibrary\Data\ScholarshipApplicationBatch.cs:290
CSOM.ScholarshipApplicationWeb.BatchSummaryControl.Edit_Click(Object sender, CommandEventArgs e) in c:\inetpub\wwwroot\ScholarshipApplicationWeb\BatchSummaryControl.cs:68
System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +110
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +138
System.Web.UI.Page.ProcessRequestMain() +1244
Version Information: Microsoft .NET Framework Version:1.0.3705.288; ASP.NET Version:1.0.3705.288
</WebPageError>
<PackageBody>
PROCEDURE GET_DETAILS(
p_batch_id IN number,
batchCursor OUT pkg_batch.refcur,
majorsCursor OUT pkg_batch.refcur,
applicationsCursor OUT pkg_batch.refcur
IS
BEGIN
OPEN batchCursor FOR SELECT
* FROM scholarshipApplicationBatch
where scholarshipApplicationBatch_id = p_batch_id;
OPEN majorsCursor FOR SELECT
* FROM major_response
where batch_id = p_batch_id;
OPEN applicationsCursor FOR SELECT
* FROM schol_detail
where batch_id = p_batch_id;
END GET_DETAILS;
</PackageBody>One workaround that seems to work is to retry in a loop.
Sample code is pasted below.
Obviously it may still fail, but less often.
I'll report any further changes that affect
the behavior in hopes it will assist the Oracle staff in
fixing it.
<CODE>
try
da.Fill(ds);
catch (OracleException excp)
const int maxTrys = 5;
int failureCount = 1;
bool succeeded = false;
for (int i = 0;i<maxTrys;i++)
try
System.Threading.Thread.Sleep(
TimeSpan.FromSeconds(1));
ds.Clear();
da.Fill(ds);
i = maxTrys;
succeeded = true;
}//try
catch
failureCount ++;
}//for
errorHandler.Report(
String.Format(
"Failure in da.Fill in ScholAppBatch. " +
" Failed {0} times. Finally Succeeded = {1}.",
failureCount.ToString(),
succeeded.ToString()),
excp);
}//catch
</CODE> -
Migration Error from Access to Oracle through SQL Developer.
Hi,
Actually I am trying to migrate data from MS Access 2002 to Oracle 9i database through the SQL Developer. But Whenever I go to Capture Database from Access it will show me an error.... Invalid procedure Call and then it shows an error message... >>>>>>
ShowSplashScreen("_OracleSplashScreen",3)
after that i wont be able to do this task anymore..... So please help me get out of it... How Cam I Maigrate data from Access to Oracle 9i...
Is any other tool i use or you can help me for this tool to migrate date...
Please tell me..
If yu can send me a mail then mail me on [email protected]
regards,
VishalHi Vishal,
I have responded to your related thread on the Migration Workbench forum - Migration Error from Access to Oracle through SQL Developer.
Regards,
Hilary -
Benefit of SharePoint 2013 sql server membership provider
Hi All, Please share your thoughts for this..
We are working with SharePoint 2013 public facing website with Form based authentication. Anyone can register and start using our site. We are storing
all the user related data in Active directory. As of now we are having around 25000 users in our portal . We are planning to move all external user information from AD to SQL membership table. Could you please suggest me to benefit of using SQL membership
instead ADperformance-wise, they're pretty similar either way (given a single dedicated role server).
security-wise, compared to SQL, AD makes some data easier to access (since LDAP queries can expose data to any user), but harder to hack (obtain copy of hashed passwords)
As far as management, there is NO management interface for the SQL membership provider... including USERS (reset password, lock/unlock account, etc), not just groups.
As far as SSO technology, SqlMembershipProvider is absolutely NOT an SSO technology. Not to say that it can't be used for logins, but authentication and single sign-on are two very different goals.
I would also argue that since you can't decrypt the AD passwords, the move to SQL is going to be a little difficult for users.
And, have you considered adding another AD server instead? With a little bit of fiddling around, you can add a dedicated AD server and prioritize SP authentication requests where you want.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
Forms based authentication in sharepoint 2013 using custom membership provider
I am developing FBA for SP2013 using custom membership provider using the following link
http://benredl.wordpress.com/2012/10/03/creating-forms-based-authentication-and-user-profiles-in-sharepoint-2013-using-custom-membership-and-role-providers-and-a-custom-user-profile-synchronization-utility/
the feature i am trying to develop is that the user is created using a homegrown asp.net application which uses sql server
and then When that user goes to SP2013 he should be able to login with the username and password created using the homegrown asp.net application
my questions are following
If I follow the article in the link should i be taking the assembly(dll) and deploying it to GAC or will VS2013 automatically do it
Do I have to implement FindUserByEmail and FindUserByName methods ?
if the connectionstring for an asp.net application is in the web.config file where would the connection for the sqlserver go if this application is for SharePoint
TIAHi TIA,
try this it contains the code for you and it is ready
http://sharepoint2013fba.codeplex.com/
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation -
Gos attachment knowlenge provider: transfer error ?
hi friends ı wrote this code but ı take this error 'Knowlenge provider : transfer error'.
please help me ?
thanks.
DATA: o_document_set TYPE REF TO cl_bds_document_set,
wa_signature LIKE bapisignat,
i_signature LIKE bapisignat OCCURS 1,
wa_files LIKE bapifiles,
i_files LIKE bapifiles OCCURS 1,
i_object_key LIKE bapibds01-objkey.
CREATE OBJECT o_document_set.
MOVE: '1' TO wa_signature-doc_count,
'1' TO wa_files-doc_count,
'C:\bluewave.jpg' TO wa_files-directory,
'bluewave.jpg' TO wa_files-filename.
APPEND wa_signature TO i_signature.
APPEND wa_files TO i_files.
i_object_key = '400000009008182008'.
CALL METHOD o_document_set->create_with_files
EXPORTING
logical_system = 'PRQ'
classname = 'BKPF'
classtype = 'BO'
client = '200'
CHANGING
object_key = i_object_key
files = i_files
signature = i_signature.
DATA : files LIkE BAPIFILES OCCURS 1 WITH header line.
files-doc_count = '1'.
files-directory = 'C:\bluewave.jpg'.
files-filename = 'bluewave.jpg'.
APPEND files.
CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREATEF'
EXPORTING
LOGICAL_SYSTEM = '200'
classname = 'BKPF'
classtype = 'BO'
CLIENT = SY-MANDT
OBJECT_KEY = '400000009008182008'
IMPORTING
OBJECT_KEY = '400000009008182008'
TABLES
files = files
SIGNATURE =It does look like a problem with the server. You might try the latest version of JavaMail.
It may not work any better, but it may give better diagnostics when it fails.
Also, check the logs on the server to see if it has more information. -
BPS Flat file load ABAP objects migration error.
Hello
We are trying to load a flat file via the SAP-GUI and BPS and everything works well in DEV based on the HOw-TO guide. When trying to move the ABAP objects to QA, we get a migration error on the type /1sem/_yth_data_260ZBYAPEPL. Of course the 260ZBYAPEP is relevant to our configuration and in QA we do have the equivalent structure /1sem/_yth_data_614ZBYAPEPL.
How come the type in DEV does not translate to the equivalent type in QA just like any objects we transport to QA?
Thank you all.
YB.Dear YB,
the element /1sem/_yth_data_260ZBYAPEPL has to be changed according to the QA manually only. Sytem can't change the clent no. automaticaaly when u transport to the QA.
so in /1sem/_yth_data_260ZBYAPEPL replce 260 with ur QA Client no.
Narendra Reddy
Maybe you are looking for
-
i have a mmacbook and i spilled liquid on the keyboard and only a few lights works,does applecare cover it?
-
Hi all, I have an HLS IP that is interracting with memory interface and other IPs. I want to always consume a fifo input to avoid potential deadlock, so here is what my design looks like: void top(stream<data_t>& in, stream<data_t>& out, ......) { #p
-
Problem while archiving a smartform
Dear All, We have implemented records management and in GMGRANT tcode, we created button and which would create a smartform when we press that. Based on the Archive link settings from OAAD tcode, when ever we try to archive that smartform, it wou
-
This is what I have so far: tell application "Google Chrome" view source of active tab of window 1 -- Or whichever tab you want delay 3 repeat while loading of active tab of window 1 delay 3 end repeat select all of active
-
Opening a RH7 project in RH9 crashes RH9
I recently had to upgrade to RH9 because RH7 was not compatible with Windows 7. I have had a pretty hard time upgrading a RH7 project to RH9, but followed the instructions to open the HHP file instead of the XPJ and saying No when asked to use the XP