Simple PP & MRP scenario

Hi,
I would appreciate if any one give me the screenshots of how to do MRP & PP with a simple scenario and how they affect other modules.
Thanks,
Archana

Dear Archana,
You have asked a very big concept ,check out this and better take the help of some SAP PP
consultants,as it seems you are new to PP Module
1. Create Materials using T code MM01 - FERT ( Finished Product),HALB (Semi-Finished Product) and
ROH (Raw materials) with Basic Data views,MRP,Purchasing view(only for ROH), Work scheduling view
(only For Inhouse manufactured products Procurement type should be E),Accounting view,Costing
view,Quality Management view (if quality is used).Let the MRP type be PD for all the materials.
2. Create BOM using T code CS01 for all your FERT & HALB.
3. Create Work center'susing T code CR01 - nothing but the machines at which the operations are
performed.
4. Create Routing for all your inhouse manufactured products FERT & HALB using T code CA01.
5.Maintain the planning strategy for your FERT material (normal one is 10) in MRP3 view.
6. Maintain the Planned independent requirements for your FERT materials in monthly basis using T code
MD61.
7. Before all these you have to maintain the SPRO settings in OPPQ, OMDU - activate MRP for your
plant,maintain number ranges for your planned orders,create production order types --its number
ranges,scheduling parameters for your planned order's in OPU5 and scheduling parameters for your
production order in OPU3.
and then you can carryout the MRP run for your FERT - finished product using T code MD02 and the results
you can check in MD04 & MD05.
The above is only for running a simple cycle.
Also refer this link to explore more about MRP
[Concept of MRP|http://www.sap-img.com/production/the-concept-of-mrp-in-erp.htm]
Try and revert back.
Regards
Mangalraj.S

Similar Messages

DVD Studio Pro - Why is it so easy to create stories, but you cannot group all them together for a simple PLAY all scenario, instead of going to scripts

- Why is it so easy to create stories, but you cannot group all them together for a simple PLAY all scenario, surely it can be done? I am about to give scripting a shot but seriously it looks way to confusing compared to stories, I have several sub menus and in each sub menu I have a play all story, however what I also want to do is create a PLAY ALL from the main menu, any suggestions
Erby60

Duplicate all your stories, have a menu item with duplicate story 1 as the target, and set the end jump of duplicate story 1 to duplicate story 2, etc. Shouldn't that work? There may be a simpler way, but
As far as adding documents, The simplest way is to build in dvdsp and then add a folder containing the docs to the project folder that dvdsp has created and use toast to burn it. There may be a rule for naming this folder, but can't remember it at the moment.
Hey, ya know there's something called the dvdsp manual. A quick search found this
In addition to the VIDEO_TS or HVDVD_TS folder, there are other items that can be part of the format process:
A folder specified by the DVD-ROM content setting
DVD@CCESS Installers
You can change or set the folder to use for DVD-ROM content either when specifying the preformat settings or while configuring the format process. The DVD@CCESS Installers are included if the project used DVD@CCESS links and the Embed Text Data checkbox in the Disc Inspector is selected. See DVD@CCESS for more information on DVD@CCESS.

Need Help with a very simple view transition scenario

Hello All,
I am trying to learn how view transitions work and I am having a very hard time with the sample apps (like transition view app etc)...I need something much more simple at first. Can you please provide me a little guidelines on how to set up this following scenario:
App loads up and shows a title screen with a button that says go. When you click on the go button the title screen fades out and a new view fades in (or slides in, or anything at all).
Right now I have 3 nib files. There is the main one that is called on application start (tied with MainViewController, a subclass of IUViewcontroller just like in the hello world app. After the app loads the app delegate object tells the MainViewController object to load in another view controller object (via addSubview) which is tied with the second nib file; my title screen with the button. When I press the button I was thinking in the IBAction function to tell the MainViewController object to remove (or transition out somehow) the title screen view controller object then add the other view (third nib file in). This is the part I can't get working. Am I on the right track or have a gone hideously astray? Thank you!

hi,
i managed to do this for my app. (think i referred to viewTransitions sample code and modified quite a bit)
i can't remember this well cos i did this quite a while back, but i will try to help as much as possible
1) from the appdelegate i initialize a root controller (view controller class)
2) this root controller actually contains two other view controllers, let's call it viewAController and viewBController, for the screens which u are going to toggle in between. and there's also a function, let's call it toggleMenu, which will set the menus to and fro. i copied this whole chunk from the sample code. it actually defines the code on what to do, i.e. if current view is A switch to B and vice versa.
3) inside the controller files, you need to implement the toggleMenu function too, which basically calls the rootController's toggleMenu
4) we also need viewA and viewB files(view class)
5) need to add the .xib files for the respective views and link them up to the controller class. i did not use the .xib files for ui layout though, because of my app's needs. however, it will not work properly without the .xib files.
5) inside the view class of both views, i.e. viewA.m and viewB.m, you need to create a button, that will call the toggleMenu function inside the respective controller class.
it will look something like this:
[Button addTarget:ViewAController action:@selector(toggleMenu:) forControlEvents:UIControlEventTouchUpInside];
so the flow is really button (in view)-> toggleMenu(viewController) -> toggleMenu(rootController)
i'm sorry it sounds pretty hazy, i did this part weeks before and can't really remember. i hope it helps.

Simple doubts with scenarios and services

One simple and "basic" doubt
Imagine I had developed an IDOC-IDOC scenario or File-IDOC, it doesn't matter...
In my Integration Directory all the services and receivers, senders agreements and determinations remain there...
First Doubt:
How can I make them visually disappear without deleting them? Meaning, how can I disable them?
Second Doubt:
At the moment I would like to start another scenario, but that scenario will use one of the business systems created. How can I disable the other the interface determination and the receiver agreement from the other service, so that the older service won't get in execution?
When I activate the new service, he runs the older one instead of the newer...
Any help

hello gonacalo...
u r misunderstanding a few things...
when u use the term scenario, its meant for a whole development...
within an scenario u can have different business systems which r assigned to various sender/receiver channels and interfaces...
u can disable the communication channels and not the interfaces because they r meant specificallly as senders or receivers...
when a user opens a scenario , he can open his own business system components..and if u want all the determinations, agreements to be not viewed by the user in a single scenario , u may well add them to a different scenario....
hope this eases u a bit...
regards..
vishal

Simple collect ccBPM scenario

Hello everyone!
Here's my scenario:
Multiple IDOCs (of the same message type DEBMAS) may be triggered by a scheduled program (RBDMIDOC). The mapping I created in XI results into individual files being sent to an FTP folder. What I want to happen is for all the IDOCS that were sent to be collected in XI and sent as ONE file to the FTP folder. I understand this can be done using ccBPM, but all the blogs I've seen so far deal with more complex scenarios. Would anyone be willing to show me the basic steps (abstract interfaces to create, creating containers and processes, etc.) to make my scenario possible. I hope y'all can be as simple as possible.
Thanks in advance!
Glenn

Glenn,
Cool. Keep the Time Dependant example as reference which I've given above.
Import your IDOC DEBMAS into Imported Objects.
Data type and Message type for Target (File)
Create two Interfaces
Abstract Asynchronous Interface --- use IDOC DEBMAS(Interface1)
Abstract Asynchronous Interface --- File Target Message(Interface2)
Message Mapping
Source : IDOC
Target: File Message
Change the occurrence of source message to 0..Unbounded.
Interface Mapping
Source :Interface1
Target : Interface2
Change the occurrence of Source message to 0..unbounded.
BPM
Container Elements
Receive -
Interface1
Receive_ML -
Interface1
Send -
Interface2
Click on the Receive Step -- choose Receive Container element
Clikc on Container Operation -- choose Receive_ML Container element as Target and Receive as Expression
Click on the deadline branch and give 15 mins
Click on Transformation step : Source: Receive_ML , Target : Send
Click on Send Step : use Send Container element
Hope it helps!
raj.

Simple value mapping scenario

Hi,
I have a simple mapping scenario but cant find the right functoids to use. I have a simple "if else" functoid
If sender has the value 10 then the equal functoid is true and maps the value Yes. If sender is anything else but true then value mapping is No.
But now I want to add a extra value. So if sender is 10 or 20 then its Yes.
How can I achieve this?

If you want to use functiod to have If-then-else, then this can be archived using the comboination of Equal, Logical Or and Value Mapping fucntiod.
Following article explains this in detail with an example.
http://blogs.msdn.com/b/chrisromp/archive/2007/05/29/to-be-or-logical-not-to-be.aspx
Otherwise a scripting functiod can do this with custom script with if-then-else in it.
You can choose any of these options.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

MRP Scenario

Plant P001 and P002 will run MRP.
Plant P001 will manufacture some finished goods, its components will be externally procured.
After MRP run, system shall give PR for external vendors. No issues in this.
Plant P002 is also manufacturing some finished goods (these finished goods may be same that are produced at P001 or may be different) but the components are not procured externally. These components are provided by plant P001. How to take care of this planning scenario.
Also through some light on the lead times which need to be maintained in Material master.
Thanks & Regards

Your scenario is a classic case of multi-plant planning.
1) Go to SPRO - Production - Material requirement planning - Master data - Define special procurement type.
2) You will be led to the screen 'Special procurement overview'
3) In this table, enter the new entries - Plant as P002, Give a number to 'SP' type column, under special procurement type description as 'Component production in plant P001'.
4) Then go to the details view of your new entry.
5) Procurement type as 'E'.
6) Then under section 'As BOM component' tick the check box against the withdrawl alternative plant and mention the plant as 'POO1'.
7) If it is a direct production, then under the same section you can tick the check box.
8) Finally you enter this special procurement key in MRP2 view.
Jist: The special procurement key with the type will help you planning the production / procurement of the finished product and the components also. In your case the finished product is in one plant and the components to be produced from the alternative plant.
Please check and confirm.

Workflow - Need a simple & complete Workflow scenario

Hi Experts,
I want to start learning workflow. May i Request any one of you to please give me simple example scenarios on workflow.
Thanks
Dany

Hello,
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://www.erpgenie.com/workflow/index.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.insightcp.com/res_23.htm

A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-press.com/downloads/h950_preview.pdf
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
also seach the workflow forum: SAP Business Workflow
Regards,
Beejal
**Reward if this helps

Transactions used in simple file-idoc scenario

hi all,
what are the transactions used in idoc scenario...(Ex: idx1 for creating new idco)
let me know what is the transaction code to find the clients available...
Is it 'SCC4'
Please provide me required info
Thanks
Narasimha
Edited by: Narasimha bommela on Jan 23, 2008 9:17 PM

Try this guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Covers everything from setting partner profiles to monitoring Idocs
I can also recommend this book: http://www.sap-press.com/product.cfm?account=&product=H1935

Simple data modelling scenario

I have Org dimension A (Grand Total->Primary->Dept->Detail) and Fact B (connects to A via Detail column A.Detail=A.Detail). There's a column MoreDetail in B that needs to be added to Org A. This shouldn't be a problem with a simple join in opaque view/select based on Detail=Detail. The only problem is that the updated Dimension would have MoreDetail as the lowest Grain. Is this possible w/o heavy reorganization? Thanks

1) change keys for fact table and dim table (if using details)
2) add moredetail to heirarchy
3) set level to moredetail whereever level was detail.
if you are concerned about changes in reports, you can do some small trick to name rename details as lessdetails and moredetails as details. (be wary of the aliases created in presentation layer)

Simple GIS Integration Scenario

Hello members,
idea is simply to display an ESRI GIS map within a dynpro while providing data integrity.
My first aim is to achieve a simple connectivity such as selecting some lines from an ALV grid control cause points on map to be selected. (and vice-versa if possible).
any idea or advice on how to achieve this, greatly appreciated.
many thanks.
Okan.

Hava a look at those links:
http://help.sap.com/saphelp_erp2004/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/4b/72d43ac66e1f08e10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/igs configuration in visual administrator.pdf
Good luck )
/Rasmus

Simple SD scenario

Hi Pals,
I just want a basic Business scenario in SD module. Not complicated, simple horizontal Scenario. The Scenario should be only in SD perspective.
Regards
AK

Hi Anil,
Simple and basic scenario in SD is Quatation to Cash
it starts from pre sales activities like
Quatation and follows sales order, Delivery, Invoice and Payment.
Reward points if it is useful.
Thanks & Regards
Sasikanth.Ch

Purchase order status in MRP run

Hi Gurus,
I have a doubt in MRP run.
While doing the MRP run, can there be any open PO s or is it mandatory to close them.
Can you also please suggest me on how to run the MRP.

Hi,
MRP Run
Purpose
The Material Requirements Planning (MRP) function enables you to plan material requirements for complex manufacturing processes. You use the MRP Wizard to create and run MRP scenarios. The MRP Wizard generates recommendations for the production and purchasing orders required to produce the final product on time and in the required quantity. You then use these recommendations to create production and purchase orders in the Order Recommendation Report.
The order recommendation cannot be issued for requirements that happened in the past (before the present day). Since the purchasing or production process cannot be completed in time, the MRP does not mix the real past data with new recommendations for the same period.
Prerequisites
●     You have defined the
○     Planning system
○     Procurement method
○     Order mutliple
○     Minimum order
○     Lead time
See also: Item Master Data, Planning Data Tab.
●     You have set the time interval between orders. See also: Define Inventory Cycles.
●     You have defined the appropriate items as non-production bills of materials (if required). See also: Item Master Data, General Tab.
●     You have defined default warehouses. See also: Define Warehouses.
●     You have defined forecasts. See also: Forecasts.
●     You have selected the Consume Forecast option to make the system exclude existing sales orders from the forecast. If this is not selected, the forecast considers existing sales orders as an additional requirement. See also: Sales Order.
●     You have set the planning definitions. If you chose Consume Forecast, you have defined the consumption method, days forward and days backward. See also: General Settings, Inventory Tab.
Process Flow
       1.      Start the MRP Wizard.
       2.      Create a new MRP scenario or select an existing one. (See also: MRP Wizard: Select New or Existing Scenario.)
       3.      Define the parameters for your scenario, such as the planning horizon and item details.
You also choose your display preferences. (See also: MRP Wizard: Scenario Details.)
       4.      Define the data sources for requirements that you want to include in your MRP scenario.
For example, you define whether you want to consider the existing stock or the minimum stock level. You can also include a predefined forecast. (See also: MRP Wizard: Data Source.)
       5.      Save the scenario or run it.
After you run the scenario, the system displays the MRP Results.
If there are red figures in the result table, solve the problem and re-run the MRP.
       6.      Analyze the MRP results. You can display the final stock quantity before the MRP run or after it.
       7.      Save the recommendations and exit the MRP Wizard.
Result
After completing the MRP Wizard, you still need to create the purchase and production orders in accordance with the MRP recommendations. See also: Order Recommendation Report.
Hope this will help.
Reward Point if helpful
Thanks,
Raja

File - File integration scenario in SAP XI 3.0

I am trying a simple file <-> file scenario in XI 3.0 . I am reading file content from an FTP server , having a simple mapping program in XI and then writing it to another foler on the FTP server.
I am completely new to XI , however worked on TIBCO EAI extensively.
I have created the following DESIGN TIME Objects and NOTHING ELSE
1) Two DataTypes , Two Message Types & Two Message Interfaces
2) An interface mapping & a message mapping object( mapping program) to convert b/w the above two message types
I have created the following CONFIGURATION TIME objects and NOTHING ELSE
1) Two Business Services ( Under Service without Party ) , and ve created a communication channel ( adapter type FILE ) under each business service
I am trying to use the Configuration Assistant under Tools menu , the doc says , i just need to select the message types & the rest will be genrated by the wizard. I choose the Business Service , but then what is the "INTERFACE" i have to choose , since nothin appears in the drop down. I tried "Internal Communication" & "Partner Communication" options but got stuck in both when choosing the "interface" object. Ideally i think i need to choose the "internal communication".
Any pointers to what am i missing will be helpful . What are the objects i need to create at Design Time & Config time to achieve the above scenario.

The Configuration Assistant does not work for business services without party. Go to the SLD and create one or two Business Systems and add them to the Integration Directory, then it should work.
Regards
Stefan

File 2 RFC scenario debugging

Morning all,
I have a very simple A sync. scenario File to RFC.
To allow debugging of the Interface,my ABAP programmer has created an endless loop.
What's strange is that on SM50 I can track a new Process created by the XI user and after
a few more seconds another session with a new ID appears....
Have you encountered a similar issue before? what is the reason for it then?
Any way, after removing the "debugging loop " everything runs fine.
Points will be awarded for the most reasonable answer....
Nimrod Gisis

Hi,
I do agree , see the below reason and links also
you can see that many dialog work processes are occupied with the program SAPLARFC. You might also see update or batch processes with the status stopped RFC.
This is because in transaction SMQS as many tRFCs were started at the same time as the parameter settings allow and this has resulted in the user contexts losing their rollability. This situation arises for instance when mass data is processed. See SAP note 726148 for more information and possible solutions.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/145db7b9c3c64e8af1c0be1dae6f37/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/470dc21ca4447b828597f614aaaec1/frameset.htm
regards
Chilla
reward points if it is helpful..

Simple PP & MRP scenario

Similar Messages

Maybe you are looking for