Single project report for Plan values, Budget values,commitments & actual

Hi experts,
Highly appreciated if any experts can let me know report which can be used to view Plan values, Budget values , commitments & actual values for each and every WBS levels for given project.
I need one report to view all mentioned fields.
Kind regards,
Sam Lesha.

Dear Amit,
TX lot for your helpful quick answer, I checked the report, it's fine and i need to clear one more thing .
when i select Std profile as PS infor profile there i could find plan version 0 & 1. would it be pssible to know how i can add one more plan versions to this.
Tx in advance,
Reg,
Sam Lesha

Similar Messages

Table for Planned cost & Budgeted value with WBS

Hi,
Which is the table where we can get WBS description & planned cost in PS?
and any other table or report where we can see the comparison & see the balance of planned cost value and budget value
thanks & regards,

Hi,
You mean to say in CJ40 not in CJ30.
Step 1: Go to PRPS Table and enter the WBSE and get the OBJNR no.
Step 2:Pass the OBJNR in RPSCO and you can get the planned cost value.Note WRTTP should be 1.
Muzamil

Is there standard report for planned and actual devlivery date?

Hi Guru,
Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
I wonder, Is there standard report for planned and actual delivery date?
or I have to create a customizing report.
Thank you very much.

hi
i dont think it is possible to see both in one pan so try to create some Z report
u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
regards
kunal

Variance report for planned vs actual 261

Hi Experts,
Is there a variance report for planned v/s actual raw material consumption for an order when the order is still running? I mean when only the partial quantities are confirmed (PCNF, PDLV)?
Regards,
Sachin

Hi,
Always the plannig is done for ordered quantity and the actual quantity is what actually used.
Pl. use T code CO02/CO03 - Goto - Cost Analysysis, you will get the details which you are looking for. If the layout doesn't suits your requirement, change layout with change options.
Madhava

Report for Planned Delivery Costs

Hi,
Is there any Report for Planned delivery costs per month/day.One of our client needs separate report for frieght charges so that he can be able to pay service tax (GTA) for the same.
Thanks
Prasad

Hai,
Did you check thro' Tcode MIR5.

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
<b>RCOPCA08 Profit Center: Plan Line Items</b>
VVR

Report Internal Order needed - showing Plan and Budget Values?

Hello,
I want to create a report (Report Writer/Painter) which shows for example in one column the planned values and in another column the budget value of an order group.
I know the standard reports S_ALR_87012993 - Orders: Actual/Plan/Variance and the other standard report S_ALR_87013019 - List: Budget/Actual/Commitments.
My question: Is it possible at all to have these both values plan and budget by order/order group in one report? - Or it is not possbile because these values are stored in different tables and different libraries?
If it is possible with Report Writer, I would be very glad - if not, is there any other chance (e.g. individual programmed report)?
For any comments or hints thank you in advance.
Regards,
VCG

HI,
both are report painter reports for libraries 6O1 and 6O2 which are based on reporting tables CCSS and RWCOOM.
Try to find all value fields that you need in 6O2 / RWCOOM as this is the "big brother" of 6O1/ CCSS.
Best regards, Christian

Report for Qty Contract and Value Contract with PO release exceeding limits

Hi All,
Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
Thanks in advance!

hi Duke,
If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
So, there is no report for the same...
Hope it helps...
Regards
Priyanka.P

Report for inward and outward value/rate

We had an audit query regarding Inventory valuation. The auditor was not convinced of the price movements. Following is the procedure adopted by me to convince the auditor. In the process I located an error in the system. Kindly let me know which t-code I should use to get the correct values.
We are a Trading company engaged in distribution of Raw Materials (Chemicals) Imported - 99% & 1% local purchase.
Ours is a Moving Average Inventory system in SAP (ECC6). We adopted this because all our materials are imported and most of them are of a different batch no. barring a few exceptions.
I firstly took out the PO history tab screen shot for the value of the inventory (as well as Rate/kg) to know the valuation at the time of GRN. Then I went to MM03 for the same material with the same batch/valuation type so that the rate/kg is confirmed therein, in the Accounting1 screen. Thirdly, the Warehouse stock of Material report (MB52) was run to know the current values. At all these places, I found that the valuation is perfectly matching with the PO history MIRO values, which gives the inventory purchase value.
But when I ran the Material document list, (MB51) report, wherein the inward & outward values of the said batch of material is reported, the inventory value charged to COGS is matching with all the above reports in the previous paragraph for the material issued on various dates. However, the inward date even though it matches with the PO history MIRO date, the value does not match. Is it a report issue or a configuration issue.
Else is there any other report which gives the exact inward and outward value/rate??

Hi,
Check your material movement report with Transaction Code:S_P00_07000139.
System working perfectly on accounting document posting where price control available in material master play vital role.
Cross check your material master may have moving average price (price control -V) where system valuates goods receipts with the purchase order price and goods issues with the current moving average price.The system automatically calculates the latter upon every goods movement by dividing the total value by the total stock quantity ( Total Value/Total quantity)
Regards,
Biju K

Standard Report for PO with Condition Value

HI MM experts,
I have checked all the existing standard reports ME2*, cud not find the report which gives the
condition value means
Eg; PO made on Pencils - Qty 10 NOs. @ Rs. 1/- (incl tax)
condition value for the above is Rs.10, in std sap all reports are showing with net price only
PO no. 45XXXXXXX dt 11.11.2011 - Pencil - qty-10 - Net price Rs.1
Please let us know is there any Standard report which gives the condition value ie., Rs.10 along with or without Net price.

Thank you! It is not meeting my requirement.
I am looking for sap standard report to see the PO value or condition value which is nothing but
Qty X net price. I do not want to touch the tables.
for analysis purpose, i want to have the total PO value in any MM Standard Report.
Today i am visiting every PO and looking at header data for PO value. or at item level Condition value.

Report For Asset, Field ANBTR01 value problem

hi,
I have created one report for asset.
i used 2 tables ANLZ, ANLA..
but i want to retrive value of ***.acquis.val. and Accm.ord.deprec of Tcode AS92.
But this is showing structure field..
iwant table from where i can retrieve my valu..
plz tel me solution.

Sujeet
Check tables:
ANEP Asset Line Items
AUAI Settlement Amounts per Depreciation
Thanks
Amol Lohade

Standard report for PO no, PO value, Vendor, Overdeliv.Tol, Underdeliv.Tol,

Hi Experts,
We have client requirement as follows, need a standard report which gives us the following information.
PO number, PO value, Vendor, Overdelivery Tolerance, Underdelivery Tolerance, Unlimited check activated.
Kindly let me know is there any standard report for the above requirement.
Thanks in advance
VNR

Hi All,
I tried with transactions codes provided i.e. ME2N, ME2M, ME2L, but I am not getting the fields Overdelivery.Tol, under delivery.Tol and Unlimited in the reports, remaining I can see.
Any other options please!
Regards,
VNR

Report for Asset with only values (No Zero values)

Hi All
There is requirement where in the user wants to genenerate report for assets with values .There should not be Zero balance assets included in the output. In short only with values in the asset master the report needs to be generated. Can one have any idea on this .
regards
Navin
Edited by: Naveen Rao on Jan 22, 2009 10:04 AM

Hi
Can you please specify the report name.
regards
Navin

Report for planned or prodcution order for production in Alternate plants

Hai gurus,
I have two plants - X and Y
Plant x have finished goods A and B to be produced and procured from plant - Y
plant Y have finished goods C and D to be produced and procured from plant - X
The production in alternate plant concept is used in plant X for Product A and B
The production in alternate plant concept is used in Plant Y for Product C and D.
Now my requirement is how to get the report for the Purchase order raised by the
plant X for the Finished product A and B , also how to know the planned order
and production order with reference to purchase order for Finished product A and B
under plant - Y
and VIce versa for the Finished product C and B in plant X and Y
Waiting for the positive reply.
Regards,
Sekar chand

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

What is equivalent ASCP report for Planned Order&Order Reschedule Report

What is equivalent report for Supply Chain Planned Order Report & Supply Chain Order Reschedule Report
We are currently on MRP and running Supply Chain Planned Order Report successfully. We are planning to go to ASCP(Decentralized) next month ,what is the equivalent reports in ASCP?
Edited by: SanDan on Jan 9, 2013 1:57 PM

Hi ,
You can explore the Planning Detail Report which you can run against your ascp plan. However there are few standard reports available in ascp. I suggest you can explore option of building custom report which will be best suited to your business needs (i.e. using Discoverer or if you are also implementing obiee you can build a custom report based on standard views or noitex views (- for ascp)
Regards
narendra

Single project report for Plan values, Budget values,commitments & actual

Similar Messages

Maybe you are looking for