%SIP-3-BADPAIR:
Please can anyone explain this error message and what caused it. I see whenever I made an inbound call:
pr 15 11:31:09.565: %SIP-3-BADPAIR: Unexpected event 16 (SIPSPI_EV_CC_CALL_MED
IA_CHANGED) in state 11 (STATE_RECD_INVITE) substate 0 (SUBSTATE_NONE)
Also how I can fix it.
Knmezi.
hi
This is what i could get from cisco..
1. %SIP-3-BADPAIR: Unexpected [chars] [dec] ([chars]) in state [dec] ([chars]) substate [dec] ([chars])
The SIP state machine has encountered an error while processing an event or timer.
Recommended Action: Copy the error message exactly as it appears on the console or in the system log.
Issue the show tech-support command to gather data that might help identify the nature of the error.
If you cannot determine the nature of the error from the error message text or from the show tech-support command output, contact your Cisco technical support representative and provide the representative with the gathered information.
regds
Similar Messages
-
%SIP-3-BADPAIR: Unexpected timer 12
Hi everyone!
I have a Cisco 2800 router running version 12.4(16b) of the IPVOICEK9-M IOS (sh ver below):
Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(16b), RELEASE SOFTWARE (fc3)
and am continually experiencing the following SIP error:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
378: Jan 11 10:17:31.208 GMT: %SIP-3-BADPAIR: Unexpected timer 12
(SIP_TIMER_DIGIT) in state 10 (STATE_DEAD) substate 0 (SUBSTATE_NONE)
Has anyone else experienced the same issue / can advise how to resolve the problem? It does not appear to affect call connectivity, but I am worried that slowly the device is going to become unresponsive since the Cisco site appears to point to a memory leak issue?
Regards
ScottJust to add some lines...
Errors on E1 controllers were due to bad cabling. We did change cable and we are not experiencing errors on it anymore.
I still wonder what those two sip messegges mean? -
I keep getting these messages with CME 12.4.9.T with CUE 2.3.1, I read one link on Net Pro that said this should be resolved by now and the other said to collect the logs and send it to TAC. Any one know if these are harmless?
%SIP-3-BADPAIR: Unexpected timer 23 (SIP_TIMER_REMOVE_TRANSACTION) in state 27 (SIP_STATE_OPTIONS_WAIT) substate 0 (SUBSTATE_NONE)
Aug 3 19:54:21.465: %SIP-3-BADPAIR: Unexpected timer 23 (SIP_TIMER_REMOVE_TRANSACTION) in state 27 (SIP_STATE_OPTIONS_WAIT) substate 0 (SUBSTATE_NONE)SIP Processes causing slow memory leak when there no active calls . Specifically sip register timer expiry messages are causing this behavior. Try to upgrade the software to 12.4(09.15)T or to an higher version
-
CSCtj69246 - percentSIP-3-BADPAIR Unexpected timer 10 andgt;
Hi
I have a cisco 3900 router (flash0:c3900-universalk9-mz.SPA.150-1.M1.bin) and It has the same issue. The Logs show the following:
Aug 27 17:02:45.344: %SIP-3-BADPAIR: Unexpected timer 10 (SIP_TIMER_DIGIT) in state 18 (STATE_SENT_MIDCALL_INVITE) substate 0 (SUBSTATE_NONE)
Aug 27 17:04:58.460: %SIP-3-BADPAIR: Unexpected timer 10 (SIP_TIMER_DIGIT) in state 18 (STATE_SENT_MIDCALL_INVITE) substate 0 (SUBSTATE_NONE)
Aug 27 17:05:56.083: %SIP-3-BADPAIR: Unexpected timer 10 (SIP_TIMER_DIGIT) in state 18 (STATE_SENT_MIDCALL_INVITE) substate 0 (SUBSTATE_NONE)
Aug 27 17:02:45.344: %SIP-3-BADPAIR: Unexpected timer 10 (SIP_TIMER_DIGIT) in state 18 (STATE_SENT_MIDCALL_INVITE) substate 0 (SUBSTATE_NONE)
Aug 27 17:04:58.460: %SIP-3-BADPAIR: Unexpected timer 10 (SIP_TIMER_DIGIT) in state 18 (STATE_SENT_MIDCALL_INVITE) substate 0 (SUBSTATE_NONE)
Aug 27 17:05:56.083: %SIP-3-BADPAIR: Unexpected timer 10 (SIP_TIMER_DIGIT) in state 18 (STATE_SENT_MIDCALL_INVITE) substate 0 (SUBSTATE_NONE)
I was investigating and i found that it is a bug. Bug CSCtj69246. https://tools.cisco.com/bugsearch/bug/CSCtj69246
I wonder if any of you know how to fix this bug?
Thank you for your help.
Elix.Hi Aaron,
I have the exact issue. I'm using a CISCO2951/K9 with IOS c2951-universalk9-mz.SPA.151-4.M4.bin.
My Environment is also:
PSTN---SIP---CUBE---SIP----CUCM---CTI_RoutePoint(IVR, UCCX Express)
Any suggestion?
Thank you very much in advance,
Ulderico -
Cisco SIP Phone 9971 won't register on CME 8.6 or 8.5 Please HELP
Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.
I configured CME for SIP clients, then I add configuration for 9971 phone and create profiles. Phone downloaded SEP...xml file from CME,after that phone look for g4-tones.xml and gd-sip.jar files, I added them to CME after that phone downloaded them and reboot. Now phone is stuck in some kind of loop and does not register on CME.
On phone log I can see repeting next few messeges.
12:01:58a No DNS Server IP
12:01:59a Updating Trust list
12:01:59a No Trust List instaled
12:01:59a SEP04C5AB03B0D.cnf.xml (TFTP) // at this time phone download SEP...xml file from CME
12:02:00a VPN Error: VPN is not Configured
on CME if issue DEBUG TFTP EVENTS i receive next few lines
*Aug 18 18:20:19.891: TFTP: Looking for CTLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:19.987: TFTP: Looking for ITLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:20.083: TFTP: Looking for ITLFile.tlv
*Aug 18 18:20:20.347: TFTP: Looking for SEP04C5A4B03B0D.cnf.xml
*Aug 18 18:20:20.351: TFTP: Opened flash:/SEP04C5A4B03B0D.cnf.xml, fd 14, size 4585 for process 141
*Aug 18 18:20:20.363: TFTP: Finished flash:/SEP04C5A4B03B0D.cnf.xml, time 00:00:00 for process 141
here you can see verison info of CME
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 15:31 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
ELTOSAN_ROUTER uptime is 1 hour, 50 minutes
System returned to ROM by reload at 16:29:20 UTC Thu Aug 18 2011
System image file is "flash:/c2900-universalk9-mz.SPA.151-4.M.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO2901/K9 (revision 1.0) with 471040K/53248K bytes of memory.
Processor board ID FGL1508252Y
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
Survivable Remote Site Voicemail (SRSV) on Cisco Unity Express (CUE) 8.5.1 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO2901/K9 xxxxxxxxxxxxx
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
this is RUNNING CONFIGURATION
! Last configuration change at 16:10:12 UTC Thu Aug 18 2011
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ELTOSAN_ROUTER
boot-start-marker
boot system flash:/c2900-universalk9-mz.SPA.151-4.M.bin
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
no ip routing
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.5.1 192.168.5.10
ip dhcp excluded-address 192.168.5.200 192.168.5.255
ip dhcp pool phone
network 192.168.5.0 255.255.255.0
default-router 192.168.5.251
option 150 ip 192.168.5.251
ip dhcp pool data
relay source 192.168.2.0 255.255.255.0
relay destination 192.168.2.201
multilink bundle-name authenticated
crypto pki token default removal timeout 0
voice-card 0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol pass-through g711alaw
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 192.168.5.251 port 5060
max-dn 6
max-pool 6
load 9971 sip9971.9-1-1SR1.loads
authenticate register
tftp-path flash:
create profile sync 0005135312289902
voice register dn 1
number 207
allow watch
name GossaVM
label 207
voice register dn 3
number 101
name Dejan
label 101
mwi
voice register pool 1
id mac 000C.29C5.0011
number 1 dn 1
dtmf-relay sip-notify
username testvm password testera
codec g711alaw
voice register pool 3
id mac 04C5.A4B0.3B0D
type 9971
number 3 dn 3
presence call-list
dtmf-relay rtp-nte
username dejan password 1234
codec g711alaw
no vad
license udi pid CISCO2901/K9 sn xxxxxxxxxxxx
hw-module ism 0
hw-module pvdm 0/0
redundancy
interface GigabitEthernet0/0
description INTERFACE INTERNAL
no ip address
no ip route-cache
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/0.2
description LAN DATA
encapsulation dot1Q 2
ip address 192.168.2.251 255.255.255.0
no ip route-cache
interface GigabitEthernet0/0.5
description LAN VOICE
encapsulation dot1Q 5
ip address 192.168.5.251 255.255.255.0
no ip route-cache
interface ISM0/0
no ip address
no ip route-cache
shutdown
!Application: SRSV-CUE Running on ISM
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
interface ISM0/1
description Internal switch interface connected to Internal Service Module
shutdown
interface Vlan1
no ip address
no ip route-cache
shutdown
ip forward-protocol nd
no ip http server
no ip http secure-server
snmp-server community public RO
tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads
tftp-server flash:United_States/g4-tones.xml
tftp-server flash:English_United_States/gd-sip.jar
control-plane
voice-port 0/0/0
voice-port 0/0/1
voice-port 0/0/2
voice-port 0/0/3
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password jebiga
login
transport input all
end
I did not have any kind of problem with X-LITE to register to CME. also try with few SCCP phones 7940 and I did not any kind of problem .
this is content of SEP....xml file for 9971
<device>
<deviceProtocol>SIP</deviceProtocol>
<devicePool>
<dateTimeSetting>
<dateTemplate>M/D/YA</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp priority="0">
<name>0.0.0.0</name>
<ntpMode>unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<sipPort>5060</sipPort>
</ports>
<processNodeName>192.168.5.251</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<localCfwdEnable>true</localCfwdEnable>
<callForwardURI>service-uri-cfwdall</callForwardURI>
<callPickupURI>service-uri-pickup</callPickupURI>
<callPickupGroupURI>service-uri-gpickup</callPickupGroupURI>
<callHoldRingback>2</callHoldRingback>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>2</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<remotePartyID>true</remotePartyID>
</sipStack>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel></featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name></name>
<displayName></displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="2" lineIndex="2">
<featureID>9</featureID>
<featureLabel>101</featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name>101</name>
<displayName>Dejan Rakic</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<enableVad>true</enableVad>
<preferredCodec>g711alaw</preferredCodec>
<dialTemplate></dialTemplate>
<kpml>1</kpml>
<phoneLabel></phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
</sipProfile>
<commonProfile>
<phonePassword>1234</phonePassword>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
<loadInformation>sip9971.9-1-1SR1.loads</loadInformation>
<vendorConfig>
</vendorConfig>
<commonConfig>
<videoCapability>0</videoCapability>
<ciscoCamera>0</ciscoCamera>
</commonConfig>
<sshUserId>dejan</sshUserId>
<sshPassword>1234</sshPassword>
<userId></userId>
<phoneServices>
<provisioning>2</provisioning>
<phoneService type="1" category="0">
<name>Missed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/MissedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Received Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/ReceivedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Placed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/PlacedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="2" category="0">
<name>Voicemail</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/Voicemail</url>
<vendor></vendor>
<version></version>
</phoneService>
</phoneServices>
<versionStamp>0131511014412102</versionStamp>
<userLocale>
<name>English_United_States</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
</networkLocaleInfo>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<servicesURL>http://192.168.5.251:80/CMEserverForPhone/serviceurl</servicesURL>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
</device>Hello,
I'm facing exactly the same problem, that is:
a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
I have read all the postings to this Forum, but I have not been able to solve it.
In my case the commands voice register dn and voice register pool are OK.
So frankly, I have no idea what I could be missing.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811# -
Unable to call using sip communicator
i am using sip communicator.to run it i ve installed ant and jdk1.4 .also set the path.then i run the bat file of sip communicator and configure it also.bt i cnt established the call.thr is some errors.
again i am using my sip server.its domain name is bangla.net.in the sip-communicator.xml file i ve make some changes.its my xml file
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<log4j>
<rootLogger value="net.java.sip.communicator.common.Console.TraceLevel, RFLogger"/>
<appender>
<RFLogger value="org.apache.log4j.RollingFileAppender">
<layout value="org.apache.log4j.PatternLayout">
<ConversionPattern value="%r [%t] %p %c{2} %x - %m%n"/>
</layout>
<MaxBackupIndex value="1"/>
<File value="log/sip-communicator.app.log"/>
<MaxFileSize value="256KB"/>
</RFLogger>
</appender>
</log4j>
<net>
<java>
<sip>
<communicator>
<FIRST_LAUNCH value="false"/>
<ENABLE_SIMPLE value="false"/>
<media>
<!--- <PREFERRED_AUDIO_ENCODING system="false" value=""/> -->
<PREFERRED_AUDIO_ENCODING value="0"/>
<PREFERRED_VIDEO_ENCODING value="26"/>
<MEDIA_SOURCE value=""/>
<MEDIA_BUFFER_LENGTH value="100"/>
<IP_ADDRESS value=""/>
<AUDIO_PORT value="22224"/>
<VIDEO_PORT value=""/>
</media>
<sip>
<PUBLIC_ADDRESS value="sip:[email protected]"/>
<TRANSPORT value=""/>
<REGISTRAR_ADDRESS value="192.168.110.33"/>
<USER_NAME value="20"/>
<STACK_PATH value="gov.nist"/>
<PREFERRED_LOCAL_PORT value=""/>
<DISPLAY_NAME value="pranti"/>
<REGISTRAR_TRANSPORT value="UDP"/>
<REGISTRATIONS_EXPIRATION value="3600"/>
<REGISTRAR_PORT value="5060"/>
<FAIL_CALLS_ON_DEST_USER_MISMATCH value="false"/>
<DEFAULT_DOMAIN_NAME value="bangla.net"/>
<DEFAULT_AUTHENTICATION_REALM value="bangla.net"/>
<WAIT_UNREGISTGRATION_FOR value="1100"/>
<SAME_USER_EVERYWHERE value="true"/>
<simple>
<CONTACT_LIST_FILE value="contact-list.xml"/>
<SUBSCRIPTION_EXP_TIME value="600"/>
<MIN_EXP_TIME value="120"/>
<LAST_SELECTED_OPEN_STATUS value="online"/>
</simple>
</sip>
<!--
net.java.sip.communicator.sipphone.IS_RUNNING_SIPPHONE=false
net.java.sip.communicator.sipphone.MY_SIPPHONE_URL=http://my.sipphone.com
-->
<sipphone>
<IS_RUNNING_SIPPHONE value="false"/>
<MY_SIPPHONE_URL value="http://my.sipphone.com"/>
</sipphone>
<!--
net.java.sip.communicator.gui.AUTH_WIN_TITLE=SIP Authentication!
net.java.sip.communicator.gui.AUTHENTICATION_PROMPT=Please enter login name and password for the specified realm:
net.java.sip.communicator.gui.USER_NAME_LABEL=SIPphone Number:
net.java.sip.communicator.sipphone.USER_NAME_EXAMPLE=Example: 1-747-555-1212
net.java.sip.communicator.gui.PASSWORD_LABEL=Password:
-->
<gui>
<AUTH_WIN_TITLE value="SIP Authentication!"/>
<AUTHENTICATION_PROMPT value="Please enter login name and password for the specified realm:"/>
<USER_NAME_LABEL value="User Name:"/>
<USER_NAME_EXAMPLE value="Example: 1-747-555-1212"/>
<PASSWORD_LABEL value="Password:"/>
<GUI_MODE value="PhoneUiMode"/>
<!--GUI_MODE value="ImUiMode"/-->
<imp>
<CONTACT_LIST_X value=""/>
<CONTACT_LIST_Y value=""/>
<CONTACT_LIST_WIDTH value=""/>
<CONTACT_LIST_HEIGHT value=""/>
</imp>
</gui>
<common>
<PREFERRED_NETWORK_INTERFACE value="VIA Rhine II Fast Ethernet Adapter"/>
<PREFERRED_NETWORK_ADDRESS value="192.168.110.26"/>
</common>
<!--
net.java.sip.communicator.STUN_SERVER_ADDRESS=stun01.sipphone.com
net.java.sip.communicator.STUN_SERVER_PORT=3478
net.java.sip.communicator.VOICE_MAIL_ADDRESS=17475551212
-->
<STUN_SERVER_ADDRESS value="stun01.sipphone.com"/>
<STUN_SERVER_PORT value="3478"/>
<VOICE_MAIL_ADDRESS value="17475551212"/>
</communicator>
</sip>
</java>
</net>
<gov>
<nist>
<javax>
<sip>
<SERVER_LOG value="log/sip-communicator.stack.log"/>
<TRACE_LEVEL value="16"/>
</sip>
</javax>
</nist>
</gov>
<javax>
<sip>
<IP_ADDRESS value="192.168.110.26"/>
<STACK_NAME value="sip-communicator"/>
<ROUTER_PATH value="net.java.sip.communicator.sip.SipCommRouter"/>
<OUTBOUND_PROXY value="bangla.net:5060/udp"/>
<RETRANSMISSON_FILTER value=""/>
<EXTENSION_METHODS value=""/>
<RETRANSMISSION_FILTER value="true"/>
</sip>
</javax>
<java>
<net>
<preferIPv4Stack system="true" value="true"/>
<preferIPv6Addresses system="true" value="false"/>
</net>
</java>
</configuration>
bt thr are still error
the errors are givenbelow.
net.java.sip.communicator.sip.CommunicationsException: Failed to create inviteTransaction.
This is most probably a network connection error.
at net.java.sip.communicator.sip.CallProcessing.invite(CallProcessing.java:883)
at net.java.sip.communicator.sip.SipManager.establishCall(SipManager.java:681)
at net.java.sip.communicator.SipCommunicator.handleDialRequest(SipCommunicator.java:379)
at net.java.sip.communicator.gui.GuiManager.dialButton_actionPerformed(GuiManager.java:342)
at net.java.sip.communicator.gui.GuiManager$1.actionPerformed(GuiManager.java:612)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: javax.sip.TransactionUnavailableException: Could not resolve next hop or listening point unavailable!
at gov.nist.javax.sip.SipProviderImpl.getNewClientTransaction(SipProviderImpl.java:351)
at net.java.sip.communicator.sip.CallProcessing.invite(CallProcessing.java:876)
please tell me wht kind of error it is.why i cnt make theDid you find out what caused the error??
-
Snom phones in secondary subnet unable to call out - SIP CANCEL in SIP log
I've been trying to diagnose this very strange problem we are having. All our servers and some SNOM phones are in the subnet 192.168.100.0, the main building. They all work fine. Phones located in two other buildings connected with high-speed fiber use subnets
192.168.1.0 and 192.168.200.0. They can receive calls but are unable to call out. This doesn't affect the Lync 2010 and 2013 desktop clients with enterprise voice...they work fine anywhere, even externally.
We are running Lync Server 2013 Standard Edition, with the latest updates applied. Mediation role is co-located. Edge server is setup and I think I have configured everything correctly. I have two network adapters, one external facing and one internal facing.
External facing one has dns settings and gateway, internal facing has neither. I have setup persistent routes that enable the edge server to ping hosts in 1.0 and 200.0 no problem. DNS is setup internally so anyone anywhere can ping the edge server (its dns
entry is routable lync2013edge.network.domain.ca). Phones used are the SNOM 720, I have the latest updates applied (8.8.3.27 UC)
On the actual SNOM phone, I will dial 7804636201. It will call and start ringing the other party. Almost exactly 10 seconds later I will hear a busy signal and then the phone displays "Media Connectivity Failure". I ran a log on SIP from the FE
Standard Edition server, here are some entries that I noticed that may have something to do with it (see bottom four paragraphs for SIP CANCEL)
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:42.240.0008db5d (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D806F0 ) Start Line: INVITE sip:7804636201;[email protected];user=phone SIP/2.0
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.269.0009106f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F91
Direction: outgoing
Peer: lync2013.network.caedm.ca:5070
Message-Type: request
Start-Line: INVITE sip:[email protected]:5070;user=phone;maddr=lync2013.network.caedm.ca SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:cO0WSS9wCFqUnP0dpEh6uQAA;gruu>;reg-id=1
Via: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Record-Route: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
Max-Forwards: 69
Content-Length: 3563
Content-Type: multipart/alternative;boundary="next_part_u00iwyrezkkuxf3d"
P-Asserted-Identity: "Joel Smith"<tel:+17808092404;ext=2404>
Message-Body: --next_part_u00iwyrezkkuxf3d
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-Dis; handling=optional; ms-proxy-2007fallback
TL_INFO(TF_DIAG) [0]411C.2DE8::02/24/2015-17:23:42.270.000915ec (SIPStack,SIPAdminLog::WriteDiagnosticEvent:SIPAdminLog.cpp(802))[3706963737] $$begin_record
Severity: information
Text: Routed a locally generated response
SIP-Start-Line: SIP/2.0 100 Trying
SIP-Call-ID: 3faa35f677ef48719b27c796251b0519
SIP-CSeq: 1 INVITE
Peer: 192.168.1.201:51470
Data: destination="[email protected]"
$$end_record
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.274.000928d4 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F93
Direction: outgoing;source="local"
Peer: 192.168.1.201:51470
Message-Type: response
Start-Line: SIP/2.0 101 Progress Report
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Content-Length: 0
ms-diagnostics: 12006;reason="Trying next hop";source="LYNC2013.NETWORK.CAEDM.CA";PhoneUsage="Long Distance";PhoneRoute="LocalRoute";Gateway="208.68.17.53";appName="OutboundRouting"
$$end_record
TL_INFO(TF_PROTOCOL) [1]411C.2DE8::02/24/2015-17:23:42.488.000930bc (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[741182734] $$begin_record
Trace-Correlation-Id: 741182734
Instance-Id: 2F96
Direction: incoming
Peer: lync2013.network.caedm.ca:5070
Message-Type: response
Start-Line: SIP/2.0 183 Session Progress
FROM: "Joel Smith"<sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
TO: <sip:7804636201;[email protected];user=phone>;tag=d265bdc1c8;epid=0A24894D6D
CALL-ID: 3faa35f677ef48719b27c796251b0519
CSEQ: 1 INVITE
CONTACT: <sip:[email protected];gruu;opaque=srvr:MediationServer:0wzNMLUTNFKXO5KjW1mbdQAA>;isGateway
VIA: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE,SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
RECORD-ROUTE: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
CONTENT-LENGTH: 1388
CONTENT-TYPE: application/sdp
TL_VERBOSE(TF_NETWORK) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f6b (SIPStack,CRecvContext::CreateIncomingRequest:RecvContext.cpp(920))[3030787245]( 0000005F01E739D0 ) creating SIP_MID_CANCEL request
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f90 (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D7E2E0 ) Start Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00099054 (SIPStack,CSIPMessage::ParseNextHeader:SIPMessage.cpp(1532))( 0000005F03D7E2E0 ) Found Header: Reason: SIP;cause=488;text="Media Connectivity Failure"
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:51.369.000990c6 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2FA0
Direction: incoming
Peer: 192.168.1.201:51470
Message-Type: request
Start-Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport
Max-Forwards: 70
Content-Length: 0
$$end_record
I thought it might be a timeout issue, so I tried following these steps located here:
http://ipfone.hu/lync-mediation-server-cancel-problem/ After rebooting the server no changes were noticed.
I also checked out this website
http://blog.insidelync.com/2013/04/sip-trunking-101-with-lync-server-2013/ regarding disabling the check box "enable outbound routing failover timeout". Doing that had no effect.
Any other ideas would be appreciated.Hi,
yes I see the config file is very simple and standard.
So the issue with snom on branch sites is random, it's correct?
From what I read in your answer, sometimes you can establish a correct communication between a snom and the called number +17804636201.
Have you tried to collect a network capture on a snom at branch location?
Do you have some other version of snom phone (300, 710, 821) to test?
Do you have some LPE ip-phone (Polycom CX600 o HP4110-4120) to test?
Regards
Luca
Luca Vitali | MCITP Lync/Exchange | snom Certified Engineer | Sonus SBC1000 Engineer -
No SIP 200 OK after Q.931 CONNECT
Cisco AS 5350 configured as H.323 Gateway on CUCM.
Call flows from SIP to H.323.
Inbound dial-peer
dial-peer voice 43 voip
session protocol sipv2
session target ipv4:10.20.8.11
incoming called-number 322####04
voice-class codec 1
Outbound dial-peer
dial-peer voice 103 voip
destination-pattern 322####04
session target ipv4:10.20.8.6
voice-class codec 1
I see messages exchange
SIP: Recieved INVITE -> Sent 100 Trying
Q.931: SETUP -> CALL_PROC -> ALERTING
SIP: Sent 180 Ringing
Q.931: NOTIFY
SIP: Recieved PRACK -> Sent 200 OK -> Sent UPDATE -> Recieved 200 OK
I pick up the phone
Q.931: CONNECT -> NOTIFY
And then Nothing! No SIP signaling. No 200 OK.
As a result I hear ring back on the calling side, and silence on the called one.
Please, help. What's wrong with it?
Oct 1 09:35:47.692: h323chan_chn_process_read_socket: fd=2 of type CONNECTED has data
Hex representation of the SETUP TPKT received: 08028DAD0704038090A24C060081313130307E006B0522C0060008914A0005000A1408069F4B22C0B50000120F436973636F43616C6C4D616E6167657200310000F42F50F1CAB1421E0254020A140E041D0C001100277F9807488511E4833DE2C8A6D0856E0100010010A00100120140B50000120B8204020004000103000100
Q931 Message IE Decodes
Protocol Discriminator : 0x08
CRV Length : 2
CRV Value : 0x8DAD
Message Type : 0x07: CONNECT
Bearer Capability: Length Of IE=3
Data 8090A2
Connected Number: Length Of IE=6
Data 008131313030
User-User: Length Of IE=107
Data 0522C0060008914A0005000A1408069F4B22C0B50000120F436973636F43616C6C4D616E6167657200310000F42F50F1CAB1421E0254020A140E041D0C001100277F9807488511E4833DE2C8A6D0856E0100010010A00100120140B50000120B8204020004000103000100h225ParseData: Q.931 CONNECT received on fd=2
Oct 1 09:35:47.692: Changing to new event: CONNECT
h323chan_chn_connect: connecting to 10.20.8.6:40779
Oct 1 09:35:47.692: h323chan_gw_conn: Created socket fd=3
Oct 1 09:35:47.692: h323chan_gw_conn: connect in progress on fd=3h323chan_chn_connect: using fd=3, owner_data(ccb) 0x69BFC32C
changing from NONE state to CONNECTING state
Oct 1 09:35:47.692: h323chan_chn_process_read_socket: fd=2 of type CONNECTED has data
Hex representation of the SETUP TPKT received: 08028DAD6E2701F14C060081313130307E00210528501900060008914A000500277F9807488511E4833DE2C8A6D0856E10800100
Q931 Message IE Decodes
Protocol Discriminator : 0x08
CRV Length : 2
CRV Value : 0x8DAD
Message Type : 0x6E: NOTIFY
Notification Ind: Length Of IE=1
Data F1
Connected Number: Length Of IE=6
Data 008131313030
User-User: Length Of IE=33
Data 0528501900060008914A000500277F9807488511E4833DE2C8A6D0856E10800100h225ParseData: Q.931 NOTIFY received on fd=2
Oct 1 09:35:47.692: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_call_service_msg: ccb NULL, unable to update the callinfo ui parameters
Oct 1 09:35:47.692: h323chan_chn_process_read_socket: fd=3 of type CONNECT_PENDING has data
Oct 1 09:35:47.692: Changing to new event: CONNECTED
hq_as5350xm_gw1#changing from CONNECTING state to CONNECTED state
Oct 1 09:35:47.692: h323chan_chn_process_read_socket: fd=3 of type CONNECTED has data
Oct 1 09:35:47.692: h323chan_recvdata: No Data on fd=3
PROCESS_READ: FAILED/NOT COMPLETE,rc 10, fd=3Please configure the ff and send the logs
service sequence-numbers
service timestamps debug datetime localtime msec
logging buffered 10000000 debug
no logging console
no logging monitor
default logging rate-limit
default logging queue-limit
Then..
<Enable debugs, then test again.>
debug ccsip messages
debug h225 asn1
debug h245 asn1
<Enable session capture to txt file in terminal program.> (such as Putty)
then do the ff:
terminal length 0
show logging -
hi,
I install Occas on OS win7 64bit, jdk 1.6.0.45.
I got the following error message while I start Occas server:
because error occurs when parsing sip related annotations of "testservicecomplexobject-application"
WLST-WLS-1396579151484: com.bea.wcp.sip.engine.server.setup.SipAnnotationParsingException
at com.bea.wcp.sip.engine.server.setup.SipAnnotationData.<init><SipAnnotationData.java:155>
Also, when I deploy a sip servlet package(sar) to the Occas server, after deploy finish, at the deployment manager page,
health term is none.
and also I found many error info in AdminServer/logs/domain.log as below blue font:
####<Apr 4, 2014 11:09:21 AM CST> <Error> <WLSS.Setup> <E76C3BE51B4188> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1396580961513> <BEA-331210> <Skip SIP related logic, because error occurs when parsing sip related annotations of "b2bua-sip-servlet-1.0.0-SNAPSHOT"
com.bea.wcp.sip.engine.server.setup.SipAnnotationParsingException:
at com.bea.wcp.sip.engine.server.setup.SipAnnotationData.<init>(SipAnnotationData.java:155)
at com.bea.wcp.sip.util.DeploymentUtil.getOrCreateAnnotationData(DeploymentUtil.java:74)
at com.bea.wcp.sip.util.DeploymentUtil.getAnnotationData(DeploymentUtil.java:89)
at com.bea.wcp.sip.engine.server.SipServerTailModule$1.visit(SipServerTailModule.java:129)
at com.bea.wcp.sip.engine.server.SipServerTailModule.visitAllContexts(SipServerTailModule.java:112)
at com.bea.wcp.sip.engine.server.SipServerTailModule.initialize(SipServerTailModule.java:137)
at com.bea.wcp.sip.engine.server.SipServerTailModule.prepare(SipServerTailModule.java:69)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.LinkageError: loader constraint violation: when resolving overridden method "antlr.debug.LLkDebuggingParser.removeMessageListener(Lantlr/debug/MessageListener;)V" the class loader (instance of weblogic/utils/classloaders/ChangeAwareClassLoader) of the current class, antlr/debug/LLkDebuggingParser, and its superclass loader (instance of sun/misc/Launcher$AppClassLoader), have different Class objects for the type antlr/debug/MessageListener used in the signature
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2436)
at java.lang.Class.privateGetPublicMethods(Class.java:2556)
at java.lang.Class.getMethods(Class.java:1412)
at com.bea.wcp.sip.engine.server.setup.SipAnnotationData.classAnnotationParsing(SipAnnotationData.java:344)
at com.bea.wcp.sip.engine.server.setup.SipAnnotationData.jarAnnotationParsing(SipAnnotationData.java:288)
at com.bea.wcp.sip.engine.server.setup.SipAnnotationData.annotationParsing(SipAnnotationData.java:223)
at com.bea.wcp.sip.engine.server.setup.SipAnnotationData.<init>(SipAnnotationData.java:144)
at com.bea.wcp.sip.util.DeploymentUtil.getOrCreateAnnotationData(DeploymentUtil.java:74)
at com.bea.wcp.sip.util.DeploymentUtil.getAnnotationData(DeploymentUtil.java:89)
at com.bea.wcp.sip.engine.server.SipServerTailModule$1.visit(SipServerTailModule.java:129)
at com.bea.wcp.sip.engine.server.SipServerTailModule.visitAllContexts(SipServerTailModule.java:112)
at com.bea.wcp.sip.engine.server.SipServerTailModule.initialize(SipServerTailModule.java:137)
at com.bea.wcp.sip.engine.server.SipServerTailModule.prepare(SipServerTailModule.java:69)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Apr 4, 2014 11:09:21 AM CST> <Error> <WLSS.Engine> <E76C3BE51B4188> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1396580961523> <BEA-330004> <Failed to deploy SIP application "b2bua-sip-servlet-1.0.0-SNAPSHOT"
java.lang.NullPointerException
at com.bea.wcp.sip.engine.server.setup.SipDeploymentDescriptor.<init>(SipDeploymentDescriptor.java:285)
at com.bea.wcp.sip.engine.server.setup.SipDeploymentDescriptor.parse(SipDeploymentDescriptor.java:148)
at com.bea.wcp.sip.engine.server.CanaryContext.initContext(CanaryContext.java:396)
at com.bea.wcp.sip.engine.server.CanaryContext.<init>(CanaryContext.java:334)
at com.bea.wcp.sip.engine.server.CanaryServer.installContext(CanaryServer.java:1001)
at com.bea.wcp.sip.engine.server.SipService.setupSipServletContext(SipService.java:126)
at com.bea.wcp.sip.engine.server.SipServerTailModule$1.visit(SipServerTailModule.java:130)
at com.bea.wcp.sip.engine.server.SipServerTailModule.visitAllContexts(SipServerTailModule.java:112)
at com.bea.wcp.sip.engine.server.SipServerTailModule.initialize(SipServerTailModule.java:137)
at com.bea.wcp.sip.engine.server.SipServerTailModule.prepare(SipServerTailModule.java:69)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Can anyone give some suggession?
Thanks in advance!
BR//MarginHi,
I changed my jvm from sun jdk to latest jrockit and the issue was solved :) -
Cisco 2811 SIP-to-SIP GW T.38 does not work!
Hello!
Diagram is something like this: Softswitch(MERA) -->>-- Cisco2811 -->>-- Softswitch(MERA) It's needed to limit traffic if one of SSWs is hacked. But it is not a subject. We just need such "construction".
Previously there was Cisco 1760 instead of 2811, result was the same. So I exclude platform and IOS.
1. Voice calls are sent and received fine in diagram above.
2. Fax are passed good between two Softswitches if I exclude Cisco2811.
3. Faxes are stopped immediately when I re-route voice traffic through Cisco2811 (in the same conditions on both Softswitches as in above paragraph 2. That is, Faxes are passed between Softswitches directly, I don't change anything on Softswitches, and I just re-route Voice from both Softswitches on C2811 - Faxes stop immediately).
4. Relevant configuraion:
voice service voip allow-connections sip to sip!!voice class uri Centrex sip host ^10\.0\.99\.111$!voice class uri RTU1 sip host ^10\.0\.99\.121$!voice class uri RTU2 sip host ^10\.0\.99\.221$!!voice class codec 1 codec preference 1 g711alaw bytes 80 codec preference 2 clear-channel!!voice translation-rule 112 rule 1 /^000112\(.*\)$/ /\1/!voice translation-rule 999 rule 1 /^999\(.*\)$/ /000\1/!voice translation-rule 999112 rule 1 /^\(.*\)$/ /999112\1/!voice translation-profile 112 translate called 112!voice translation-profile 999 translate called 999!voice translation-profile 999112 translate called 999112!!interface FastEthernet0/0.18 encapsulation dot1Q 18 ip address 10.0.99.29 255.255.255.0 no snmp trap link-status!!dial-peer voice 999112 voip translation-profile incoming 999112 voice-class codec 1 session protocol sipv2 incoming uri from Centrex dtmf-relay rtp-nte fax-relay ecm disable fax rate 9600 fax nsf 000000 fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback pass-through g711alaw no vad!dial-peer voice 999 voip translation-profile outgoing 999 destination-pattern 999.+ voice-class codec 1 session protocol sipv2 session target ipv4:10.0.99.99 session transport udp dtmf-relay rtp-nte fax-relay ecm disable fax rate 9600 fax nsf 000000 fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback pass-through g711alaw no vad!dial-peer voice 112 voip translation-profile outgoing 112 destination-pattern 000112.+ voice-class codec 1 session protocol sipv2 session target ipv4:10.0.99.100 session transport udp dtmf-relay rtp-nte fax-relay ecm disable fax rate 9600 fax nsf 000000 fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback pass-through g711alaw no vad!dial-peer voice 901 voip voice-class codec 1 session protocol sipv2 incoming uri from RTU1 dtmf-relay rtp-nte fax-relay ecm disable fax rate 9600 fax nsf 000000 fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback pass-through g711alaw no vad!dial-peer voice 902 voip voice-class codec 1 session protocol sipv2 incoming uri from RTU2 dtmf-relay rtp-nte fax-relay ecm disable fax rate 9600 fax nsf 000000 fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback pass-through g711alaw no vad!
5. TSHARK from left-side Softswitch:
16:10:51.680764 10.0.99.221 -> 10.0.99.29 SIP/SDP Request: INVITE sip:[email protected];user=phone, with session description16:10:51.721616 10.0.99.29 -> 10.0.99.221 SIP Status: 100 Trying16:10:55.413288 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 183 Session Progress, with session description16:10:55.418718 10.0.99.29 -> 10.0.99.221 SIP Status: 180 Ringing16:10:59.090481 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 200 OK, with session description16:10:59.091451 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:04.296532 10.0.99.29 -> 10.0.99.221 SIP Status: 488 Not Acceptable Media16:11:04.296708 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:04.793058 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 200 OK, with session description16:11:04.793262 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:05.793043 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 200 OK, with session description16:11:05.793261 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:07.793042 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 200 OK, with session description16:11:07.793300 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:11.793077 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 200 OK, with session description16:11:11.793264 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:15.793316 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 200 OK, with session description16:11:15.793541 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:19.793289 10.0.99.29 -> 10.0.99.221 SIP/SDP Status: 200 OK, with session description16:11:19.793538 10.0.99.221 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:11:23.794963 10.0.99.29 -> 10.0.99.221 SIP Request: BYE sip:[email protected]:5061;user=phone16:11:23.795650 10.0.99.221 -> 10.0.99.29 SIP Status: 200 OK
6. TSHARK from right-side Softswitch:
16:10:12.071247 10.0.99.111 -> 10.0.99.29 SIP/SDP Request: INVITE sip:[email protected];user=phone, with session description16:10:12.113708 10.0.99.29 -> 10.0.99.111 SIP Status: 100 Trying16:10:12.843352 10.0.99.29 -> 10.0.99.111 SIP/SDP Status: 183 Session Progress, with session description16:10:16.328955 10.0.99.29 -> 10.0.99.111 SIP/SDP Status: 200 OK, with session description16:10:16.329808 10.0.99.111 -> 10.0.99.29 SIP Request: ACK sip:[email protected]:506016:10:51.721600 10.0.99.29 -> 10.0.99.100 SIP/SDP Request: INVITE sip:[email protected]:5060, with session description16:10:51.723145 10.0.99.100 -> 10.0.99.29 SIP Status: 100 Trying16:10:55.384493 10.0.99.100 -> 10.0.99.29 SIP/SDP Status: 183 Progress, with session description16:10:55.392178 10.0.99.100 -> 10.0.99.29 SIP Status: 180 Ringing16:10:59.069771 10.0.99.100 -> 10.0.99.29 SIP/SDP Status: 200 OK, with session description16:10:59.088587 10.0.99.29 -> 10.0.99.100 SIP Request: ACK sip:[email protected]:5060
7. Debug output for "debug ccsip all" and "debug voice dialpeer all"
Router#*Sep 19 12:27:55.107: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportSetAgeingTimer: Aging timer initiated for holder=0x4654DA30,addr=10.0.99.111*Sep 19 12:27:55.267: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 10.0.99.221:5061*Sep 19 12:27:55.267: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000*Sep 19 12:27:55.267: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 10.0.99.221,Port 5061, Transport 1, SentBy Port 5061*Sep 19 12:27:55.267: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:INVITE sip:[email protected];user=phone SIP/2.0Via: SIP/2.0/UDP 10.0.99.221:5061;rport;branch=z9hG4bK-3628481038-3792786178-436258467-408012644From: <sip:[email protected]:5061;user=phone>;tag=4095425038-3792786178-436258467-408012644To: <sip:[email protected];user=phone>Call-ID: [email protected]: 1 INVITEContact: <sip:[email protected]:5061;user=phone>Content-Type: application/sdpAllow: ACK, BYE, CANCEL, INFO, INVITE, OPTIONS, REFER, REGISTER, UPDATEMax-Forwards: 70User-Agent: MERA MVTS3G v.4.4.0-15Cisco-Guid: 237931618-38998498-2747662362-1690784024Category: 10Content-Length: 313v=0o=- 1348056651 1348056651 IN IP4 10.0.99.221s=-c=IN IP4 10.0.99.221t=0 0m=audio 17294 RTP/AVP 8 0 18 4 96a=rtpmap:8 PCMA/8000a=rtpmap:0 PCMU/8000a=rtpmap:18 G729/8000a=fmtp:18 annexb=noa=rtpmap:4 G723/8000a=fmtp:4 annexa=yesa=rtpmap:96 telephone-event/8000a=fmtp:96 0-15a=sendrecv*Sep 19 12:27:55.267: //-1/0E2E8C62A3C6/SIP/State/sipSPIChangeState: 0x4627A3B8 : State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)*Sep 19 12:27:55.267: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 10.0.99.221,Port 5061, Transport 1, SentBy Port 5060*Sep 19 12:27:55.267: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Clock Time Zone is UTC, same as GMT: Using GMT*Sep 19 12:27:55.267: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 10.0.99.221,Port 5061, Transport 1, SentBy Port 5061*Sep 19 12:27:55.271: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetGtdBody: No valid GTD body found.*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/SIP/Info/sipSPIUaddCcbToUASReqTable: ****Adding to UAS Request table.*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/SIP/Info/sipSPIUaddCcbToTable: Added to table. ccb=0x4627A3B8 [email protected]*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on carrier id*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on Incoming called number: 0001124957887603*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on destination pattern: 4991589848*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/SIP/Info/ccsipUpdateIncomingCallParams: ccCallInfo: Calling name , number 4991589848, Calling oct3 0x00, oct_3a 0x80, Called number 0001124957887603*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpAssociateIncomingPeerCore: Calling Number=4991589848, Called Number=0001124957887603, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_REQUEST_URI; URI=sip:[email protected];user=phone*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchCore: Result=-1*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchPeertype:exit@5392*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_TO_URI; URI=sip:[email protected];user=phone*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchCore: Result=-1*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchPeertype:exit@5392*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_FROM_URI; URI=sip:[email protected]:5061;user=phone*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE*Sep 19 12:27:55.271: //-1/0E2E8C62A3C6/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=902 Is Matched*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/DPM/dpMatchPeertype:exit@5392*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/DPM/dpAssociateIncomingPeerCore: Result=Success(0) after DP_MATCH_FROM_URI; Incoming Dial-peer=902*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/DPM/dpAssociateIncomingPeerSPI:exit@5926*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/SIP/Info/sipSPIGetCallConfig: Peer tag 902 matched for incoming call*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/SIP/Info/sipSPIGetCallConfig: Using Voice Class Codec, tag = 1*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/SIP/Info/sipSPICopyPeerDataToCCB:From CLI: Modem NSE payload = 100, Passthrough = 0, Modem relay = 0, Gw-Xid = 1SPRT latency 200, SPRT Retries = 12, Dict Size = 1024 String Len = 32, Compress dir = 3*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/SIP/Info/sipSPIContinueNewMsgInvite: Calling name , number 4991589848, Calling oct3 0x00, oct_3a 0x80, ext_priv 0x00, Called number 0001124957887603, oct3 0x00*Sep 19 12:27:55.275: //-1/0E2E8C62A3C6/SIP/Info/sipSPIContinueNewMsgInvite: Carrier id code , prev_cid NONE, next_cid NONE, prev_tgrp NONE, next_tgrp NONE*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoMediaNegotiation: Number of m-lines = 1*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoAudioNegotiation: Codec (g711alaw) Negotiation Successful on Static Payload for m-line 1*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoPtimeNegotiation: No ptime present or multiple ptime attributes that can't be handled*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoDTMFRelayNegotiation: m-line index 1*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(96) could not be reserved.*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoDTMFRelayNegotiation: Requested DTMF-RELAY payload (96) is reserved by another application.*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoDTMFRelayNegotiation: Requested DTMF-RELAY option(s) not found in Preferred DTMF-RELAY option list!*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIStreamTypeAndDtmfRelay: DTMF Relay mode: Inband Voice*Sep 19 12:27:55.275: //-1/xxxxxxxxxxxx/SIP/Info/sip_sdp_get_modem_relay_cap_params: NSE payload from X-cap = 0*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sip_select_modem_relay_params: X-tmr not present in SDP. Disable modem relay*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIGetSDPDirectionAttribute: No direction attribute present or multiple direction attributes that can't be handled for m-line:1 and num-a-lines:0*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoAudioNegotiation: Codec negotiation successful for media line 1 payload_type=8, codec_bytes=80, codec=g711alaw, dtmf_relay=inband-voice stream_type=voice-only (0), dest_ip_address=10.0.99.221, dest_port=17294*Sep 19 12:27:55.275: //19/0E2E8C62A3C6/SIP/Media/sipSPIUpdCallWithSdpInfo: Preferred Codec : g711alaw, bytes :80 Preferred DTMF relay : rtp-nte Preferred NTE payload : 101 Early Media : No Delayed Media : No Bridge Done : No New Media : No DSP DNLD Reqd : No*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.0.99.29*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_report_media_to_peer: callId 19 peer 0 flags 0x201*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:CallID 19, sdp 0x45A61FCC channels 0x4627BC80SIP: (19) Attribute ptime, level 1 instance 1 not found.*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 8 mline 1*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g711alaw*Sep 19 12:27:55.279: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711alaw codecbytes :80, ptime: 10*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Media negotiation done: stream->negotiated_ptime=0,stream->negotiated_codec_bytes=80, coverted ptime=10 stream->mline_index=1, media_ndx=1*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Adding codec 6 ptype 8 time 10, bytes 80 as channel 0 mline 1 ss 0 10.0.99.221:17294*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 0 mline 1*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g711ulawSIP: (19) Attribute ptime, level 1 instance 1 not found.*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Media negotiation NOT done, get ptime from sdp: ptime=0, media_ndx=1*Sep 19 12:27:55.279: //-1/xxxxxxxxxxxx/SIP/Info/convert_ptime_to_codec_bytes: Values :Codec: g711ulaw ptime :0, codecbytes: 0*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Codec bytes 0, use default packet rate 160*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Adding codec 5 ptype 0 time 0, bytes 160 as channel 1 mline 1 ss 0 10.0.99.221:17294*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 18 mline 1*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPISelectCodecVersion: Codec (g729r8) is not in preferred list*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIRouter#P/Info/sipSPI_ipip_copy_sdp_to_channelInfo: An exact codec match not configured, using interoperable codec g729r8 pre-ietf*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g729r8 pre-ietfSIP: (19) Attribute ptime, level 1 instance 1 not found.*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Media negotiation NOT done, get ptime from sdp: ptime=0, media_ndx=1*Sep 19 12:27:55.279: //-1/xxxxxxxxxxxx/SIP/Info/convert_ptime_to_codec_bytes: Values :Codec: g729r8 pre-ietf ptime :0, codecbytes: 0*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Codec bytes 0, use default packet rate 20*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Adding codec 0 ptype 18 time 0, bytes 20 as channel 2 mline 1 ss 0 10.0.99.221:17294*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 4 mline 1*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPISelectCodecVersion: Codec (g723ar63) is not in preferred list*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: An exact codec match not configured, using interoperable codec g729r8 pre-ietf*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g729r8 pre-ietfSIP: (19) Attribute ptime, level 1 instance 1 not found.*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Media negotiation NOT done, get ptime from sdp: ptime=0, media_ndx=1*Sep 19 12:27:55.279: //-1/xxxxxxxxxxxx/SIP/Info/convert_ptime_to_codec_bytes: Values :Codec: g729r8 pre-ietf ptime :0, codecbytes: 0*Sep 19 12:27:55.279: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Codec bytes 0, use default packet rate 20*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Adding codec 0 ptype 4 time 0, bytes 20 as channel 3 mline 1 ss 0 10.0.99.221:17294*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 96 mline 1*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_report_media_to_peer:Report initial call media*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/copy_channels: callId 19 size 296 ptr 0x46646D94)*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_report_media_to_peer:CCSIP: Unable to report channel ind*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Media/sipSPIUpdCallWithSdpInfo: Stream type : voice-only Media line : 1 State : STREAM_ADDING (2) Callid : -1 Negotiated Codec : g711alaw, bytes :80 Negotiated DTMF relay : inband-voice Negotiated NTE payload : 0 Negotiated CN payload : 0 Media Srce Addr/Port : 10.0.99.29:0 Media Dest Addr/Port : 10.0.99.221:17294*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPIHandleInviteMedia:Negotiated Codec : g711alaw, bytes :80Preferred Codec : g711alaw, bytes :80Preferred DTMF relay 1 : 6Preferred DTMF relay 2 : 0Negotiated DTMF relay : 0Preferred and Negotiated NTE payloads: 101 0Preferred and Negotiated NSE payloads: 100 0Preferred and Negotiated Modem Relay: 0 0Preferred and Negotiated Modem Relay GwXid: 1 0*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPIDoQoSNegotiation: SDP body with media description*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPICanSetFallbackFlag: Local Fallback is not active*Sep 19 12:27:55.283: //-1/xxxxxxxxxxxx/SIP/Media/sipSPIReserveRtpPort: reserved port 19570 for stream 1*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPIUpdateSrcSdpFixedPart: Reserving rtp port for stream 1, src_port=19570*Sep 19 12:27:55.283: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetMediaDirectionForStream: Setting Media direction SENDRECV for stream 1*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPIUpdateSrcSdpVariablePart: Setting stream 1 portnum to 19570*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPIAddBillingInfoToCcb: sipCallId for billing records = [email protected]*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_store_channel_info: Store channelInfo in CallInfo*Sep 19 12:27:55.283: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICreateRawMsg: No GTD passed.*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPIContinueNewMsgInvite: ccsip_api_call_setup_ind returned: SIP_SUCCESS*Sep 19 12:27:55.283: //19/0E2E8C62A3C6/SIP/Info/sipSPIUaddCcbToUASRespTable: ****Adding to UAS Response table.*Sep 19 12:27:55.287: //19/0E2E8C62A3C6/SIP/Info/sipSPIUaddCcbToTable: Added to table. ccb=0x4627A3B8 [email protected]*Sep 19 12:27:55.287: //19/0E2E8C62A3C6/SIP/Info/sipSPIUaddccCallIdToTable: Adding call id 13 to table*Sep 19 12:27:55.287: //19/0E2E8C62A3C6/SIP/Transport/sipSPITransportSendMessage: msg=0x4654E450, addr=10.0.99.221, port=5061, sentBy_port=5061, is_req=0, transport=1, switch=0, callBack=0x00000000*Sep 19 12:27:55.287: //19/0E2E8C62A3C6/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately*Sep 19 12:27:55.287: //19/0E2E8C62A3C6/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0*Sep 19 12:27:55.287: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4654E450, addr=10.0.99.221, port=5061, connId=0 for UDP*Sep 19 12:27:55.287: //19/0E2E8C62A3C6/SIP/State/sipSPIChangeState: 0x4627A3B8 : State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_RECD_INVITE, SUBSTATE_NONE)*Sep 19 12:27:55.287: //19/0E2E8C62A3C6/SIP/Info/sipSPIProcessContactInfo: Previous Hop 10.0.99.221:5061*Sep 19 12:27:55.287: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_PROCEEDING*Sep 19 12:27:55.291: //-1/0E2E8C62A3C6/DPM/dpMatchPeersCore: Calling Number=, Called Number=0001124957887603, Peer Info Type=DIALPEER_INFO_SPEECH*Sep 19 12:27:55.291: //-1/0E2E8C62A3C6/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=0001124957887603*Sep 19 12:27:55.291: //-1/0E2E8C62A3C6/DPM/dpMatchCore: Dial String=0001124957887603, Expanded String=0001124957887603, Calling Number= Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH*Sep 19 12:27:55.291: //-1/0E2E8C62A3C6/DPM/MatchNextPeer: Result=Success(0); Outgoing Dial-peer=112 Is Matched*Sep 19 12:27:55.291: //-1/0E2E8C62A3C6/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST*Sep 19 12:27:55.291: //-1/0E2E8C62A3C6/DPM/dpMatchPeersMoreArg: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=112*Sep 19 12:27:55.291: //20/000000000000/SIP/State/sipSPIChangeState: 0x4627C64C : State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)*Sep 19 12:27:55.291: //20/000000000000/SIP/Info/ccsip_call_setup_request: This a IPIP call: Chan 0, codec 6 channel 17294, ip A0063DD:17294 params 0x465F9EF4 caps 0x44ED30C8*Sep 19 12:27:55.291: //20/000000000000/SIP/Info/ccsip_call_setup_request: This a IPIP call: Chan 1, codec 5 channel 17294, ip A0063DD:17294 params 0x465F9EF4 caps 0x44ED30C8*Sep 19 12:27:55.291: //20/000000000000/SIP/Info/ccsip_call_setup_request: This a IPIP call: Chan 2, codec 0 channel 17294, ip A0063DD:17294 params 0x465F9EF4 caps 0x44ED30C8*Sep 19 12:27:55.291: //20/000000000000/SIP/Info/ccsip_call_setup_request: This a IPIP call: Chan 3, codec 0 channel 17294, ip A0063DD:17294 params 0x465F9EF4 caps 0x44ED30C8*Sep 19 12:27:55.291: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_SETUP*Sep 19 12:27:55.291: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler:*Sep 19 12:27:55.291: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler: switch(ev.ev_id: 137)*Sep 19 12:27:55.291: //19/0E2E8C62A3C6/SIP/Info/ccsip_event_handler: ccsip_event_handler: peer ID 20 chans 0x44EE3BB0 event 137 flags 0x10020038 0x601 data 0x44EE3BB0*Sep 19 12:27:55.291: //19/0E2E8C62A3C6/SIP/Info/ccsip_event_handler: ccsip_event_handler: CC_EV_H245_SET_MODE: peer ID 20 chans 0x44EE3BB0 event 137 flags 0x10020038 0x601 data 0x44EE3BB0*Sep 19 12:27:55.295: //19/0E2E8C62A3C6/SIP/Info/ccsip_event_handler: ccsip_event_handler: CC_EV_H245_SET_MODE: peer ID 20 chans 0x44EE3BB0 event 137 flags 0x10020038 0x601 data 0x44EE3BB0, type = 3*Sep 19 12:27:55.295: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler: CC_R_SUCCESS_WITH_CONFIRMED*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPIUaddccCallIdToTable: Adding call id 14 to table*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/act_idle_continue_call_setup:*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPIGetCallConfig: preferred_codec set[0] type :No Codec bytes: 0*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPICanSetFallbackFlag: Local Fallback is not active*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPIGetCallConfig: Using Voice Class Codec, tag = 1*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPICopyPeerDataToCCB:From CLI: Modem NSE payload = 100, Passthrough = 0, Modem relay = 0, Gw-Xid = 1SPRT latency 200, SPRT Retries = 12, Dict Size = 1024 String Len = 32, Compress dir = 3*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPI_ipip_copy_channelInfo_to_sdp:callid 20, channels 0x44E96BE0 caps 0x44ED30C8*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPI_ipip_copy_channelInfo_to_sdp:pref dtmf 96*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPIValidateGtd: No rawMsg from CCAPI*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPIUaddCcbToUACTable: ****Adding to UAC table.*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPIUaddCcbToTable: Added to table. ccb=0x4627C64C [email protected]*Sep 19 12:27:55.295: //20/000000000000/SIP/Info/sipSPIUsetBillingProfile: sipCallId for billing records = [email protected]*Sep 19 12:27:55.295: //20/000000000000/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.0.99.29*Sep 19 12:27:55.295: //-1/xxxxxxxxxxxx/SIP/Media/sipSPIReserveRtpPort: reserved port 16926 for stream 1*Sep 19 12:27:55.299: //20/000000000000/SIP/Media/sipSPIAddSDPMediaPayload: Preferred method of dtmf relay is: 6, with payload: 101*Sep 19 12:27:55.299: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711alaw codecbytes :80, ptime: 10*Sep 19 12:27:55.299: //20/000000000000/SIP/Info/sip_generate_sdp_xcapsRouter#_list: Modem Relay and T38 disabled. X-cap not needed*Sep 19 12:27:55.299: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 10.0.99.100,Port 5060, Transport 1, SentBy Port 5060*Sep 19 12:27:55.299: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Clock Time Zone is UTC, same as GMT: Using GMT*Sep 19 12:27:55.299: //20/000000000000/SIP/Event/sipSPICreateRpid: Received Octet3A=0x80 -> Setting ;screen=no ;privacy=off*Sep 19 12:27:55.299: //20/000000000000/SIP/Transport/sipSPISendInvite: Sending Invite to the transport layer*Sep 19 12:27:55.299: //20/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE*Sep 19 12:27:55.299: //20/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4654D520, addr=10.0.99.100, port=5060, sentBy_port=0, is_req=1, transport=1, switch=0, callBack=0x41086470*Sep 19 12:27:55.299: //20/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately*Sep 19 12:27:55.299: //20/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0*Sep 19 12:27:55.299: //20/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4654D520*Sep 19 12:27:55.299: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4654D520, addr=10.0.99.100, port=5060, connId=3 for UDP*Sep 19 12:27:55.299: //20/000000000000/SIP/Info/sentInviteRequest: Sent Invite in state STATE_IDLE*Sep 19 12:27:55.303: //-1/xxxxxxxxxxxx/SIP/Info/sentInviteRequest: Transaction active. Facilities will be queued.*Sep 19 12:27:55.303: //20/000000000000/SIP/State/sipSPIChangeState: 0x4627C64C : State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_SENT_INVITE, SUBSTATE_NONE)*Sep 19 12:27:55.303: //20/000000000000/SIP/Media/sipSPIProcessRtpSessions: sipSPIProcessRtpSessions*Sep 19 12:27:55.303: //20/000000000000/SIP/Media/sipSPIAddStream: Adding stream 1 of type voice+dtmf (callid 20) to the VOIP RTP library*Sep 19 12:27:55.303: //20/000000000000/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.0.99.29*Sep 19 12:27:55.303: //20/000000000000/SIP/Media/sipSPIUpdateRtcpSession: sipSPIUpdateRtcpSession for m-line 1*Sep 19 12:27:55.303: //20/000000000000/SIP/Media/sipSPIUpdateRtcpSession: rtcp_session info laddr = 10.0.99.29, lport = 16926, raddr = 0.0.0.0, rport=0, do_rtcp=FALSE src_callid = 20, dest_callid = -1, stream type = voice+dtmf, stream direction = RECVONLY media_ip_addr = 0.0.0.0*Sep 19 12:27:55.303: //20/000000000000/SIP/Media/sipSPIUpdateRtcpSession: No rtp session, creating a new one*Sep 19 12:27:55.303: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Sent:SIP/2.0 100 TryingVia: SIP/2.0/UDP 10.0.99.221:5061;rport;branch=z9hG4bK-3628481038-3792786178-436258467-408012644From: <sip:[email protected]:5061;user=phone>;tag=4095425038-3792786178-436258467-408012644To: <sip:[email protected];user=phone>;tag=114FC0-1F24Date: Wed, 19 Sep 2012 12:27:55 GMTCall-ID: [email protected]: Cisco-SIPGateway/IOS-12.xCSeq: 1 INVITEAllow-Events: telephone-eventContent-Length: 0*Sep 19 12:27:55.307: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Sent:INVITE sip:[email protected]:5060 SIP/2.0Via: SIP/2.0/UDP 10.0.99.29:5060;branch=z9hG4bK1C14C0From: <sip:[email protected]>;tag=114FE0-26C0To: <sip:[email protected]>Date: Wed, 19 Sep 2012 12:27:55 GMTCall-ID: [email protected]: 100rel,timer,replacesMin-SE: 1800Cisco-Guid: 237931618-38998498-2747662362-1690784024User-Agent: Cisco-SIPGateway/IOS-12.xAllow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTERCSeq: 101 INVITEMax-Forwards: 70Remote-Party-ID: <sip:[email protected]>;party=calling;screen=no;privacy=offTimestamp: 1348057675Contact: <sip:[email protected]:5060>Expires: 180Allow-Events: telephone-eventContent-Type: application/sdpContent-Length: 241v=0o=CiscoSystemsSIP-GW-UserAgent 3284 8564 IN IP4 10.0.99.29s=SIP Callc=IN IP4 10.0.99.29t=0 0m=audio 16926 RTP/AVP 8 101c=IN IP4 10.0.99.29a=rtpmap:8 PCMA/8000a=rtpmap:101 telephone-event/8000a=fmtp:101 0-16a=ptime:10*Sep 19 12:27:55.307: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 10.0.99.100:5060*Sep 19 12:27:55.307: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000*Sep 19 12:27:55.311: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:SIP/2.0 100 TryingVia: SIP/2.0/UDP 10.0.99.29:5060;branch=z9hG4bK1C14C0From: <sip:[email protected]>;tag=114FE0-26C0To: <sip:[email protected]>Call-ID: [email protected]: 101 INVITEContact: <sip:[email protected]:5060>Server: MERA MVTS3G v.4.4.0-15Timestamp: 1348057675Content-Length: 0*Sep 19 12:27:55.311: //20/000000000000/SIP/State/sipSPIChangeState: 0x4627C64C : State change from (STATE_SENT_INVITE, SUBSTATE_NONE) to (STATE_RECD_PROCEEDING, SUBSTATE_PROCEEDING_PROCEEDING)Router#*Sep 19 12:27:58.971: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 10.0.99.100:5060*Sep 19 12:27:58.971: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000*Sep 19 12:27:58.971: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:SIP/2.0 183 ProgressVia: SIP/2.0/UDP 10.0.99.29:5060;branch=z9hG4bK1C14C0From: <sip:[email protected]>;tag=114FE0-26C0To: <sip:[email protected]>;tag=2318849048-3792786178-436251047-2287060836Call-ID: [email protected]: 101 INVITEContact: <sip:[email protected]:5060>Content-Type: application/sdpServer: MERA MVTS3G v.4.4.0-15Content-Length: 239v=0o=- 1348056655 1348056655 IN IP4 10.0.99.111s=-c=IN IP4 10.0.99.111t=0 0m=audio 21550 RTP/AVP 8 101a=rtpmap:8 PCMA/8000a=rtpmap:101 telephone-event/8000a=fmtp:101 0-15a=ptime:10a=sendrecva=silenceSupp:off - - - -*Sep 19 12:27:58.971: //20/000000000000/SIP/Info/HandleSIP1xxSessionProgress: Content-Disposition NOT received in 18x response - using default Content-Disposition values*Sep 19 12:27:58.971: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetGtdBody: No valid GTD body found.*Sep 19 12:27:58.971: //20/000000000000/SIP/Info/sipSPIDoMediaNegotiation: Number of m-lines = 1*Sep 19 12:27:58.971: //20/000000000000/SIP/Info/sipSPIDoAudioNegotiation: Codec (g711alaw) Negotiation Successful on Static Payload for m-line 1*Sep 19 12:27:58.971: //20/000000000000/SIP/Info/sipSPIDoPtimeNegotiation: One ptime attribute found - value:10*Sep 19 12:27:58.975: //-1/xxxxxxxxxxxx/SIP/Info/convert_ptime_to_codec_bytes: Values :Codec: g711alaw ptime :10, codecbytes: 80*Sep 19 12:27:58.975: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711alaw codecbytes :80, ptime: 10*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPIDoDTMFRelayNegotiation: m-line index 1*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(101) could not be reserved.*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPIDoDTMFRelayNegotiation: Payload type (101) is reserved for requested dtmf relay mode.*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPIDoDTMFRelayNegotiation: Case of partial named event(NE) match in fmtp list of events.*Sep 19 12:27:58.975: //-1/xxxxxxxxxxxx/SIP/Info/sip_sdp_get_modem_relay_cap_params: NSE payload from X-cap = 0*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sip_select_modem_relay_params: X-tmr not present in SDP. Disable modem relay*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPIGetSDPDirectionAttribute: No direction attribute present or multiple direction attributes that can't be handled for m-line:1 and num-a-lines:0*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPIDoAudioNegotiation: Codec negotiation successful for media line 1 payload_type=8, codec_bytes=80, codec=g711alaw, dtmf_relay=rtp-nte stream_type=voice+dtmf (1), dest_ip_address=10.0.99.111, dest_port=21550*Sep 19 12:27:58.975: //20/000000000000/SIP/Media/sipSPIUpdCallWithSdpInfo: Preferred Codec : g711alaw, bytes :80 Preferred DTMF relay : rtp-nte Preferred NTE payload : 101 Early Media : No Delayed Media : No Bridge Done : No New Media : No DSP DNLD Reqd : No*Sep 19 12:27:58.975: //20/000000000000/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.0.99.29*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_report_media_to_peer: callId 20 peer 19 flags 0x7*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:CallID 20, sdp 0x45C92F44 channels 0x4627DF14*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 8 mline 1*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g711alaw*Sep 19 12:27:58.975: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711alaw codecbytes :80, ptime: 10*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Media negotiation done: stream->negotiated_ptime=10,stream->negotiated_codec_bytes=80, coverted ptime=10 stream->mline_index=1, media_ndx=1*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Adding codec 6 ptype 8 time 10, bytes 80 as channel 0 mline 1 ss 1 10.0.99.111:21550*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 101 mline 1*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/sipSPI_ipip_report_media_to_peer:Report initial call media*Sep 19 12:27:58.975: //20/000000000000/SIP/Info/copy_channels: callId 20 size 80 ptr 0x46655B7C)*Sep 19 12:27:58.975: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler:*Sep 19 12:27:58.975: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler: switch(ev.ev_id: 131)*Sep 19 12:27:58.975: //19/0E2E8C62A3C6/SIP/Info/ccsip_event_handler: ccsip_event_handler: peer ID 20 chans 0x46655B7C event 131 flags 0x10020038 0x403 data 0x46655B7C*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_event_handler: ccsip_event_handler: CC_EV_H245_OPEN_CHANNEL_IND: peer ID 20 chans 0x46655B7C event 131 flags 0x10020038 0x403 data 0x46655B7C*Sep 19 12:27:58.979: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_NEW_MEDIA*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_event_handler: ccsip_event_handler: set event->type = SIPSPI_EV_CC_NEW_MEDIA!: peer ID 20 chans 0x46655B7C event 131 flags 0x10020038 0x403 data 0x46655B7C*Sep 19 12:27:58.979: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler: CC_R_SUCCESS_WITH_CONFIRMED*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_get_rtcp_session_parameters: CURRENT VALUES: stream_callid=-1, current_seq_num=0x1A8*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_get_rtcp_session_parameters: NEW VALUES: stream_callid=-1, current_seq_num=0x0*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_caps_ind: Load DSP with negotiated codec: g711alaw, Bytes=80*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_caps_ind: Set forking flag to 0x0*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sipSPISetDTMFRelayMode: Set DSP for dtmf-relay = CC_CAP_DTMF_RELAY_INBAND_VOICE_AND_OOB*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sip_set_modem_caps: Preferred (or the one that came from DSM) modem relay=1161273728, from CLI config=0*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sip_set_modem_caps: Disabling Modem Relay...*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sip_generate_sdp_xcaps_list: Modem Relay and T38 disabled. X-cap not needed*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sip_set_modem_caps: Negotiation already Done. Set negotiated Modem caps and generate SDP Xcap list*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sip_set_modem_caps: Modem Relay & Passthru both disabled*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sip_set_modem_caps: nse payload = 0, ptru mode = 0, ptru-codec=0, redundancy=0, xid=0, relay=0, sprt-retry=12, latecncy=200, compres-dir=3, dict=1024, strnlen=32*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Media/sipSPISetStreamInfo: 0 Active Streams*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Error/sipSPISetStreamInfo: Number of active streams is zero (0)!*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Media/sipSPISetStreamInfo:caps.stream_count=0,caps.stream[0].stream_type=0xFFFF, caps.stream_list.xmitFunc=*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Media/sipSPISetStreamInfo: ??unknown??, caps.stream_list.context=*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Media/sipSPISetStreamInfo: 0x0 (gccb)*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_caps_ind: Load DSP with codec : g711alaw, Bytes=80*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/ccsip_caps_ind: ccsip_caps_ind: ccb->flags_ipip = 0x403*Sep 19 12:27:58.979: //20/000000000000/SIP/Info/ccsip_caps_ack: Set forking flag to 0x0*Sep 19 12:27:58.979: //20/000000000000/SIP/Media/sipSPIUpdCallWithSdpInfo: Stream type : voice+dtmf Media line : 1 State : STREAM_ADDING (2) Callid : 20 Negotiated Codec : g711alaw, bytes :80 Negotiated DTMF relay : rtp-nte Negotiated NTE payload : 101 Negotiated CN payload : 0 Media Srce Addr/Port : 10.0.99.29:16926 Media Dest Addr/Port : 10.0.99.111:21550*Sep 19 12:27:58.979: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICreateRawMsg: No GTD passed.*Sep 19 12:27:58.979: //20/000000000000/SIP/Info/HandleSIP1xxSessionProgress: ccsip_api_call_cut_progress returned: SIP_SUCCESS*Sep 19 12:27:58.979: //20/000000000000/SIP/State/sipSPIChangeState: 0x4627C64C : State change from (STATE_RECD_PROCEEDING, SUBSTATE_PROCEEDING_PROCEEDING) to (STATE_RECD_PROCEEDING, SUBSTATE_NONE)*Sep 19 12:27:58.979: //20/000000000000/SIP/Info/HandleSIP1xxSessionProgress: Transaction Complete. Lock on Facilities released.*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_handle_channel_info:CCSIP:callID 19 ft: 1, inc 8, 10.0.99.111:21550, codec 6*Sep 19 12:27:58.979: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_channelInfo_to_sdp:callid 19, channels 0x46655B7C caps 0x44E8F284*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_channelInfo_to_sdp:pref dtmf 101*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_channelInfo_to_sdp: nego mline 1 dtmf 101 ss 1 ret 0*Sep 19 12:27:58.983: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711alaw codecbytes :80, ptime: 10*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/sipSPI_ipip_copy_channelInfo_to_sdp: retreive codec 6 ptype 8 time 10 bytes 80*Sep 19 12:27:58.983: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetMediaDirectionForStream: Setting Media direction SENDRECV for stream 1*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/sipSPIUpdateSrcSdpVariablePart: Setting stream 1 portnum to 19570*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/sipSPIUpdateSrcSdpVariablePart: Negotiated method of dtmf relayand pyld: 6 101*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/sipSPIProcessMediaChanges: sipSPIProcessMediaChanges*Sep 19 12:27:58.983: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_PROGRESS*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/ccsip_bridge: confID = 10, srcCallID = 19, dstCallID = 20*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/InfRouter#o/sipSPIUupdateCcCallIds: Old src/dest ccCallids: -1/-1, new src/dest ccCallids: 19/20*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Info/sipSPIUupdateCcCallIds: Old streamcallid=-1, new streamcallid=19*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Media/sipSPIProcessRtpSessions: sipSPIProcessRtpSessions*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Media/sipSPIAddStream: Adding stream 1 of type voice+dtmf (callid 19) to the VOIP RTP library*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.0.99.29*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Media/sipSPIUpdateRtcpSession: sipSPIUpdateRtcpSession for m-line 1*Sep 19 12:27:58.983: //19/0E2E8C62A3C6/SIP/Media/sipSPIUpdateRtcpSession: rtcp_session info laddr = 10.0.99.29, lport = 19570, raddr = 10.0.99.221, rport=17294, do_rtcp=TRUE src_callid = 19, dest_callid = 20, stream type = voice+dtmf, stream direction = SENDRECV media_ip_addr = 10.0.99.221*Sep 19 12:27:58.987: //19/0E2E8C62A3C6/SIP/Media/sipSPIUpdateRtcpSession: No rtp session, creating a new one*Sep 19 12:27:58.987: //19/0E2E8C62A3C6/SIP/Info/sipSPIUpdateRtcpSession: Process Media changes is still pending.*Sep 19 12:27:58.987: //19/0E2E8C62A3C6/SIP/Media/sipSPIGetNewLocalMediaDirection: New Remote Media Direction = SENDRECV Present Local Media Direction = SENDRECV New Local Media Direction = SENDRECV retVal = 0*Sep 19 12:27:58.987: //20/000000000000/SIP/Info/ccsip_bridge: confID = 10, srcCallID = 20, dstCallID = 19*Sep 19 12:27:58.987: //20/000000000000/SIP/Info/sipSPIUupdateCcCallIds: Old src/dest ccCallids: -1/-1, new src/dest ccCallids: 20/19*Sep 19 12:27:58.987: //20/000000000000/SIP/Info/sipSPIUupdateCcCallIds: Old streamcallid=20, new streamcallid=20*Sep 19 12:27:58.987: //20/000000000000/SIP/Media/sipSPIProcessRtpSessions: sipSPIProcessRtpSessions*Sep 19 12:27:58.987: //20/000000000000/SIP/Media/sipSPIAddStream: Adding stream 1 of type voice+dtmf (callid 20) to the VOIP RTP library*Sep 19 12:27:58.987: //20/000000000000/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.0.99.29*Sep 19 12:27:58.987: //20/000000000000/SIP/Media/sipSPIUpdateRtcpSession: sipSPIUpdateRtcpSession for m-line 1*Sep 19 12:27:58.987: //20/000000000000/SIP/Media/sipSPIUpdateRtcpSession: rtcp_session info laddr = 10.0.99.29, lport = 16926, raddr = 10.0.99.111, rport=21550, do_rtcp=TRUE src_callid = 20, dest_callid = 19, stream type = voice+dtmf, stream direction = SENDRECV media_ip_addr = 10.0.99.111*Sep 19 12:27:58.987: //20/000000000000/SIP/Media/sipSPIUpdateRtcpSession: RTP session already created - update*Sep 19 12:27:58.987: //20/000000000000/SIP/Media/sipSPIGetNewLocalMediaDirection: New Remote Media Direction = SENDRECV Present Local Media Direction = SENDRECV New Local Media Direction = SENDRECV retVal = 0*Sep 19 12:27:58.991: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 10.0.99.100:5060*Sep 19 12:27:58.991: //19/0E2E8C62A3C6/SIP/Info/sipSPIValidateGtd: No rawMsg from CCAPI*Sep 19 12:27:58.991: //19/0E2E8C62A3C6/SIP/Info/sipSPISendInviteResponse183: Session Type is Media/Qos/Security/RTR SDP body is attached*Sep 19 12:27:58.991: //19/0E2E8C62A3C6/SIP/Transport/sipSPISendInviteResponse: Sending 183 Response to the Transport Layer*Sep 19 12:27:58.991: //19/0E2E8C62A3C6/SIP/Transport/sipSPITransportSendMessage: msg=0x4654DFD0, addr=10.0.99.221, port=5061, sentBy_port=5061, is_req=0, transport=1, switch=0, callBack=0x41086D90*Sep 19 12:27:58.991: //19/0E2E8C62A3C6/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately*Sep 19 12:27:58.991: //19/0E2E8C62A3C6/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0*Sep 19 12:27:58.991: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4654DFD0, addr=10.0.99.221, port=5061, connId=0 for UDP*Sep 19 12:27:58.991: //19/0E2E8C62A3C6/SIP/Info/sentInviteResponse18x: Sent a 18x Response*Sep 19 12:27:58.991: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000*Sep 19 12:27:58.991: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:SIP/2.0 180 RingingVia: SIP/2.0/UDP 10.0.99.29:5060;branch=z9hG4bK1C14C0From: <sip:[email protected]>;tag=114FE0-26C0To: <sip:[email protected]>;tag=2318849048-3792786178-436251047-2287060836Call-ID: [email protected]: 101 INVITEContact: <sip:[email protected]:5060>Server: MERA MVTS3G v.4.4.0-15Content-Length: 0*Sep 19 12:27:58.995: //20/000000000000/SIP/Info/ccsip_api_call_alert: SDP Body either absent or ignored in 180 RINGING:- will wait for 200 OK to do negotiation.*Sep 19 12:27:58.995: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICreateRawMsg: No GTD passed.*Sep 19 12:27:58.995: //20/000000000000/SIP/Info/HandleSIP1xxRinging: ccsip_api_call_alert returned: SIP_SUCCESS*Sep 19 12:27:58.995: //20/000000000000/SIP/State/sipSPIChangeState: 0x4627C64C : State change from (STATE_RECD_PROCEEDING, SUBSTATE_NONE) to (STATE_RECD_PROCEEDING, SUBSTATE_NONE)*Sep 19 12:27:58.995: //20/000000000000/SIP/Info/HandleSIP1xxRinging: Transaction Complete. Lock on Facilities released.*Sep 19 12:27:58.995: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Sent:SIP/2.0 183 Session ProgressVia: SIP/2.0/UDP 10.0.99.221:5061;rport;branch=z9hG4bK-3628481038-3792786178-436258467-408012644From: <sip:[email protected]:5061;user=phone>;tag=4095425038-3792786178-436258467-408012644To: <sip:[email protected];user=phone>;tag=114FC0-1F24Date: Wed, 19 Sep 2012 12:27:55 GMTCall-ID: [email protected]: Cisco-SIPGateway/IOS-12.xCSeq: 1 INVITEAllow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTERAllow-Events: telephone-eventContact: <sip:[email protected]:5060>Content-Disposition: session;handling=requiredContent-Type: application/sdpContent-Length: 268v=0o=CiscoSystemsSIP-GW-UserAgent 4191 6681 IN IP4 10.0.99.29s=SIP Callc=IN IP4 10.0.99.29t=0 0m=audio 19570 RTP/AVP 8 101c=IN IP4 10.0.99.29a=rtpmap:8 PCMA/8000a=rtpmap:101 telephone-event/8000a=fmtp:101 0-15a=ptime:10a=silenceSupp:off - - - -*Sep 19 12:27:58.999: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_ALERTING*Sep 19 12:27:58.999: //19/0E2E8C62A3C6/SIP/Info/sipSPIValidateGtd: No rawMsg from CCAPI*Sep 19 12:27:58.999: //19/0E2E8C62A3C6/SIP/Transport/sipSPISendInviteResponse: Sending 180 Response to the Transport Layer*Sep 19 12:27:58.999: //19/0E2E8C62A3C6/SIP/Transport/sipSPITransportSendMessage: msg=0x4654DFD0, addr=10.0.99.221, port=5061, sentBy_port=5061, is_req=0, transport=1, switch=0, callBack=0x41086D90*Sep 19 12:27:58.999: //19/0E2E8C62A3C6/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately*Sep 19 12:27:58.999: //19/0E2E8C62A3C6/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0*Sep 19 12:27:58.999: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4654DFD0, addr=10.0.99.221, port=5061, connId=0 for UDP*Sep 19 12:27:58.999: //19/0E2E8C62A3C6/SIP/Info/sentInviteResponse18x: Sent a 18x Response*Sep 19 12:27:58.999: //19/0E2E8C62A3C6/SIP/State/sipSPIChangeState: 0x4627A3B8 : State change from (STATE_RECD_INVITE, SUBSTATE_NONE) to (STATE_SENT_ALERTING, SUBSTATE_NONE)*Sep 19 12:27:59.003: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Sent:SIP/2.0 180 RingingVia: SIP/2.0/UDP 10.0.99.221:5061;rport;branch=z9hG4bK-3628481038-3792786178-436258467-408012644From: <sip:[email protected]:5061;user=phone>;tag=4095425038-3792786178-436258467-408012644To: <sip:[email protected];user=phone>;tag=114FC0-1F24Date: Wed, 19 Sep 2012 12:27:55 GMTCall-ID: [email protected]: Cisco-SIPGateway/IOS-12.xCSeq: 1 INVITEAllow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTERAllow-Events: telephone-eventContact: <sip:[email protected]:5060>Content-Length: 0Router#*Sep 19 12:28:02.655: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 10.0.99.100:5060*Sep 19 12:28:02.655: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000*Sep 19 12:28:02.655: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:SIP/2.0 200 OKVia: SIP/2.0/UDP 10.0.99.29:5060;branch=z9hG4bK1C14C0From: <sip:[email protected]>;tag=114FE0-26C0To: <sip:[email protected]>;tag=2318849048-3792786178-436251047-2287060836Call-ID: [email protected]: 101 INVITEContact: <sip:[email protected]:5060>Content-Type: application/sdpAllow: ACK, BYE, CANCEL, INFO, INVITE, OPTIONS, REFER, REGISTER, SUBSCRIBE, UPDATEServer: MERA MVTS3G v.4.4.0-15X-mera-expires: 86460Content-Length: 239v=0o=- 1348056655 1348056655 IN IP4 10.0.99.111s=-c=IN IP4 10.0.99.111t=0 0m=audio 21550 RTP/AVP 8 101a=rtpmap:8 PCMA/8000a=rtpmap:101 telephone-event/8000a=fmtp:101 0-15a=ptime:10a=sendrecva=silenceSupp:off - - - -*Sep 19 12:28:02.659: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetGtdBody: No valid GTD body found.*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIhandle200OKInvite: Transaction active. Facilities will be queued.*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIhandle200OKInvite: *** This ccb is the parent*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIDoMediaNegotiation: Number of m-lines = 1*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIDoAudioNegotiation: Codec (g711alaw) Negotiation Successful on Static Payload for m-line 1*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIDoPtimeNegotiation: One ptime attribute found - value:10*Sep 19 12:28:02.659: //-1/xxxxxxxxxxxx/SIP/Info/convert_ptime_to_codec_bytes: Values :Codec: g711alaw ptime :10, codecbytes: 80*Sep 19 12:28:02.659: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711alaw codecbytes :80, ptime: 10*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIDoDTMFRelayNegotiation: m-line index 1*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIDoDTMFRelayNegotiation: Case of partial named event(NE) match in fmtp list of events.*Sep 19 12:28:02.659: //-1/xxxxxxxxxxxx/SIP/Info/sip_sdp_get_modem_relay_cap_params: NSE payload from X-cap = 0*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sip_do_nse_negotiation: Remote NSE payload = local one = 0, Use it*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sip_select_modem_relay_params: X-tmr not present in SDP. Disable modem relay*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIGetSDPDirectionAttribute: No direction attribute present or multiple direction attributes that can't be handled for m-line:1 and num-a-lines:0*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPIDoAudioNegotiation: Codec negotiation successful for media line 1 payload_type=8, codec_bytes=80, codec=g711alaw, dtmf_relay=rtp-nte stream_type=voice+dtmf (1), dest_ip_address=10.0.99.111, dest_port=21550*Sep 19 12:28:02.659: //20/000000000000/SIP/Media/sipSPICompareStreams: stream 1 dest_port: old=21550 new=21550*Sep 19 12:28:02.659: //20/000000000000/SIP/Media/sipSPIGetNewLocalMediaDirection: New Remote Media Direction = SENDRECV Present Local Media Direction = SENDRECV New Local Media Direction = SENDRECV retVal = 0*Sep 19 12:28:02.659: //20/000000000000/SIP/Media/sipSPICompareStreams: Flags set for stream 1: RTP_CHANGE=No CAPS_CHANGE=No*Sep 19 12:28:02.659: //20/000000000000/SIP/Media/sipSPICompareSDP: Flags set for call: NEW_MEDIA=No DSPDNLD_REQD=No IPIP_MEDIA=No*Sep 19 12:28:02.659: //20/000000000000/SIP/Media/sipSPIUpdCallWithSdpInfo: Preferred Codec : g711alaw, bytes :80 Preferred DTMF relay : rtp-nte Preferred NTE payload : 101 Early Media : No Delayed Media : No Bridge Done : Yes New Media : No DSP DNLD Reqd : No*Sep 19 12:28:02.659: //20/000000000000/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 10.0.99.29*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPI_ipip_report_media_to_peer: callId 20 peer 19 flags 0x407*Sep 19 12:28:02.659: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:CallID 20, sdp 0x45CB1F40 channels 0x4627DF14*Sep 19 12:28:02.663: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 8 mline 1*Sep 19 12:28:02.663: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g711alaw*Sep 19 12:28:02.663: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711alaw codecbytes :80, ptime: 10*Sep 19 12:28:02.663: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Media negotiation done: stream->negotiated_ptime=10,stream->negotiated_codec_bytes=80, coverted ptime=10 stream->mline_index=1, media_ndx=1*Sep 19 12:28:02.663: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Adding codec 6 ptype 8 time 10, bytes 80 as channel 0 mline 1 ss 1 10.0.99.111:21550*Sep 19 12:28:02.663: //20/000000000000/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:Hndl ptype 101 mline 1*Sep 19 12:28:02.663: //20/000000000000/SIP/Media/sipSPIUpdCallWithSdpInfo: Stream type : voice+dtmf Media line : 1 State : STREAM_ACTIVE (5) Callid : 20 Negotiated Codec : g711alaw, bytes :80 Negotiated DTMF relay : rtp-nte Negotiated NTE payload : 101 Negotiated CN payload : 0 Media Srce Addr/Port : 10.0.99.29:16926 Media Dest Addr/Port : 10.0.99.111:21550*Sep 19 12:28:02.663: //20/000000000000/SIP/Info/sipSPIProcessMediaChanges: sipSPIProcessMediaChanges*Sep 19 12:28:02.663: //20/000000000000/SIP/Info/sipSPIhandle200OKInvite: ccsip_api_call_connect_media returned: SIP_SUCCESS*Sep 19 12:28:02.663: //20/000000000000/SIP/State/sipSPIChangeState: 0x4627C64C : SHi Ellad.
Why don't try to use the 2811 as a SIP signalling proxy only?
In this way the media (RTP or T.38) will be handled only from the two MERA SoftSwitch.
To do this you must enable CUBE on your 2811 and use these special commands:
voice service voip
media flow-around
allow-connections sip to sip
signaling forward unconditional
sip
rel1xx disable
header-passing
midcall-signaling passthru
pass-thru headers unsupp
pass-thru content unsupp
pass-thru content sdp
I don't remember if we have already try this solution.
Regards. -
using the lync client connectivity tester on a pc on the same lan as my mobile client everything is green and it says its ready for use.
using my android galaxy s5 client on wifi on the same lan i get a screen with waiting to sign in spinning and an error at the top "we cant connect to the server check your network connection and server address, and try again."
i have uploaded the full client log files
here: client log file
some errors that stand out from this log file are:
1. ERROR HttpEngine: Certificate check fails: java.security.cert.CertPathValidatorException: Trust anchor for certification path not found.
2. <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
<h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
i am using the correct creds, same creds i used on the analyzer tool.
in the analyzer tool i did have to fill in the username field because my sip domain is different then my users UPN. which from what ive read its required to use the username field.
i also filled in the username field in the mobile app with domain\username
3. ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/platform/networkapis/privateandroid/CHttpConnection.cpp/295:CHttpConnection exception: java.lang.NullPointerException
Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry
counter is: 0
4. Jan 14, 2015 8:40:50 AM ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/authenticationresolver/private/CAuthenticationResolver.cpp/431:Failing the original request as we weren't able to get the token
this is the same type of error i was getting in the lync connectivity analyzer until i filled in the username field. but its filled in, in my client.
again you can see the full log file is `HERE
thank you in advance for any help. im trying to get internal working before i try external.Eric,
I am trying to configure a reverseproxy on my netscaler which is in a 2 arm mode(dmz/internal) but I keep getting an error when configuring the monitor.
i used this guide to configure it
http://www.lynced.com.au/2014/04/configure-citrix-netscaler-vpx-as.html
but continue to get this error in the netscaler monitor "Failure - TCP connection successful, but application timed out"
so the virtual server is never up, thinking about just changing it to tcp as a monitor so it stays up and i can at lesat get the vip up.
Also your link to the diagram shows it going to the reverse proxy but the one im using has it going directly to the front end servers.
http://www.lync-solutions.com/Documents/Lync_2013_protocol_poster_v6_7.pdf
I'm guessing Microsoft's is the correct one but wonder why the config differential?
I see that your diagram says "mobility url", what is the mobility url? i though that was the lyncdiscoverinternal.internal.com
current setup is
2 fe servers on internal
1 edge server on dmz
1 almost done reverse proxy netscaler load balancer.
also this ms link i used to configure dns entries, along with the pdf linked above.
http://technet.microsoft.com/en-us/library/jj945644.aspx
i currently have these external dns entries and they all point to the edge server on the dmz.
dialin .external.com
lync .external.com
lyncweb .external.com
lyncdiscover.external.com
meet .external.com
sip .external.com
webconf .external.com
av .external.com
_autodiscover._tcp.external.com.
the internal dns links point to 1 of the front end servers
1. lyncdiscoverinternal.internal.com
2. lyncdiscover.internal.com
3. _sipinternaltls._tcp.internal.com
4. _sipinternal._tcp.internal.com
5. sipinternal.internal.com
6. sip.internal.com
thanks again for your help. -
Hi there,
I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
https://supportforums.cisco.com/thread/2031366
Thanks in advance for any help.
Carlos A Trivino
[email protected]Hello Dale,
CVP doesn't allow you to exceed the RNA more than 60 Seconds. If you want to configure the timer for DN Patterns you should do it via OPS console, It would update the sip.properties files in correct way, the above way is incorrect.
Regards,
Senthil -
Issue with instant ringback when using sip trunk to SP
Hi all,
We use CUCM 8.0.2.
We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
c2900-universalk9-mz.SPA.150-1.M3.bin
Cisco CISCO2911/K9 (revision 1.0)
Technology Package License Information for Module:'c2900'
Technology Technology-package
Current Type
ipbase ipbasek9 Permanent
security securityk9 Permanent
uc uck9 Permanent
data None None
We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
We use 7945 and CIPC for our phones.
We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
Any ideas why this happens and how to stop it?
I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
voice service voip
address-hiding
mode border-element
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
header-passing error-passthru
early-offer forced
midcall-signaling passthru
interface GigabitEthernet0/0
ip address x.x.x.x 255.255.255.252
ip access-group acl.SIP-IN in
no ip redirects
no ip unreachables
ip verify unicast reverse-path
ip virtual-reassembly
duplex full
speed 100
no cdp enable
gateway
timer receive-rtp 1200
sip-ua
connection-reuse
gatekeeper
shutdown
dial-peer voice 1 voip
description *** INBOUND CALLS FROM CARRIER ***
translation-profile incoming SIPTRUNK-INCOMING
session protocol sipv2
incoming called-number #blah blah#
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 61 voip
description **** WA, SA AND NT NUMBERS ****
destination-pattern 0[8]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[8]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 81 voip
description **** MOBILE NUMBERS ****
destination-pattern 0[4]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[4]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 500 voip
description *** INBOUND SIP TRUNK TO CUCM PUB ***
translation-profile outgoing SIPTRUNK-CALLING-ADD-0
preference 1
destination-pattern 5[12]..
session protocol sipv2
session target ipv4:<OUR CUCM PUBLISHER IP>
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
Any help or a point in the right direction would be greatly appreciated.
Cheers,
BrettI ended up resolving this issue as follows:
In CUCM, under Device > Device Settings > SIP Profile.
I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
Now, I get the expected delay before hearing ringback.
Solved! -
Please help with SIP configuration on 2801 router
Hi All.
Please help me to setup a SIP account. I’m already struggling to do that for a few days, and can’t find out how to finish that. We have 2xISDN lines running, so I need to add a SIP trunk to existing config.
The information from our SIP provider:
We have issued the following DDI range: 018877000 – 99
There is no need to register the DDI’s as these will be offered to your PABX IP address provided to in the completed SIP trunking form.
Configuration details are as follows:
Our Primary Proxy:- 99.234.56.78
Codec supported:- G711Alaw, G729 (G711Alaw is the preferred codec)
Fax Support:- T38 and G711Alaw
DTMF:- RFC2833 and INFO
CLI Method:- Remote-Party-ID
Trunk doesn’t require registration; you just need to send Invite. In cisco this is done through Dial-peer session-target command. We are authenticating your IP address for outgoing calls and incoming calls we then forward to the IP mentioned in the sip form.
This is a SIP configuration on Cisco2801 router (I used outgoing calls only):
translation-rule 10
Rule 0 ^90 0
Rule 1 ^91 1
Rule 2 ^92 2
Rule 3 ^93 3
Rule 4 ^94 4
Rule 5 ^95 5
Rule 6 ^96 6
Rule 7 ^97 7
Rule 8 ^98 8
Rule 9 ^99 9
interface FastEthernet0/0.1
description ***DATA VLAN***
encapsulation dot1Q 1 native
ip address 10.1.1.101 255.255.255.0
interface FastEthernet0/0.2
description ***VOICE VLAN***
encapsulation dot1Q 2
ip address 192.168.22.1 255.255.255.0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
call start slow
sip
bind control source-interface FastEthernet0/0.2
bind media source-interface FastEthernet0/0.2
registrar server expires max 36000 min 600
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 1 pots
description ### External Dialling via BRI ###
preference 7
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/0
forward-digits all
dial-peer voice 2 pots
description ### External Dialling via BRI ###
preference 2
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/1
forward-digits all
dial-peer voice 9000 voip
description ** Outgoing calls to SIP **
preference 1
destination-pattern 9T
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:99.234.56.78:5060
dtmf-relay rtp-nte
codec g711alaw
no vad
sip-ua
timers connect 100
sip-server ipv4:99.234.56.78
I used debugging commands to troubleshoot the calls.
2801(config-dial-peer)#
094509: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=211, Called Number=, Voice-Interface=0x65FA35B4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094510: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20018
094511: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
094512: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9
094513: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094514: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094515: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90, Peer Info Type=DIALPEER_INFO_SPEECH
094516: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90
094517: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094518: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094519: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908, Peer Info Type=DIALPEER_INFO_SPEECH
094520: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908
094521: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094522: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094523: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086, Peer Info Type=DIALPEER_INFO_SPEECH
094524: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086
094525: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094526: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094527: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862, Peer Info Type=DIALPEER_INFO_SPEECH
094528: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862
094529: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094530: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094531: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621, Peer Info Type=DIALPEER_INFO_SPEECH
094532: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621
094533: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094534: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094535: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215, Peer Info Type=DIALPEER_INFO_SPEECH
094536: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215
094537: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094538: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094539: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157, Peer Info Type=DIALPEER_INFO_SPEECH
094540: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157
094541: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094542: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094543: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621577, Peer Info Type=DIALPEER_INFO_SPEECH
094544: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621577
094545: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094546: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094547: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215777, Peer Info Type=DIALPEER_INFO_SPEECH
094548: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215777
094549: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094550: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094551: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094552: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094553: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094554: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094555: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
094556: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
094557: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094558: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094559: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094560: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094561: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094562: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094563: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094564: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
094565: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094566: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094567: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094568: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094569: Jan 24 09:27:10.719: fb_get_reject_cause_code: ERROR cause_code NULL
094570: Jan 24 09:27:10.727: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397230
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094571: Jan 24 09:27:11.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:11 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397231
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094572: Jan 24 09:27:12.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:12 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397232
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094573: Jan 24 09:27:14.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam" <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:14 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397234
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I made some changes in the router configuration.
I removed FA0/0.2 Voice interface from Voice service voip configuration (bind control source-interface FastEthernet0/0.2 and bind media source-interface FastEthernet0/0.2). And now it’s using ip address 10.1.1.101 (data ip).
The debugging is changed now. I can send and receive a respond from SIP server. But It shows an error: SIP/2.0 404 Not Found
Then it moves to ISDN line, and use this line to make a call.
102988: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
102989: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
102990: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102991: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102992: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102993: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
102994: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102995: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102996: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
102997: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
102998: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102999: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
103000: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103001: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
103002: Jan 24 14:45:47.298: fb_get_reject_cause_code: ERROR cause_code NULL
103003: Jan 24 14:45:47.310: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Seam" <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 3989446920-1171263969-2466545983-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327416347
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 2438 9821 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 19412 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
103004: Jan 24 14:45:47.354: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not Found
From: "Sam "<sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Call-ID: [email protected]
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.1.1.101:5060;received=88.99.77.44;branch=z9hG4bK4875CB9
Content-Length: 0
103005: Jan 24 14:45:47.362: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
From: "Sam " <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
103006: Jan 24 14:45:47.374: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/1, TEI 96 changed to up
103007: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=211, Peer Info Type=DIALPEER_INFO_SPEECH
103008: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=211
103009: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103010: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20018
103011: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=0862157774, Peer Info Type=DIALPEER_INFO_SPEECH
103012: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0862157774
103013: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
103014: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=NO_MATCH(-1)
103015: Jan 24 14:46:08.815: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/1, TEI 96 changed to down
2801(config-dial-peer)#
Then I removed SIP-UA as I was told there is no registration necessary, only Dial-peer configuration.
But it didn’t affect anything.
Then I add translate-outgoing called 10 command to dial-peer 9000, nothing happened.
Really stuck and don't know where to look at.
Any help will be highly appreciated.
Thanks.Hi Dan.
Yes, I saw that RTP debugging, but what can I change there? Maybe I need to open more ports on ASA for RTP like 19412?
I use Cisco ASDM for ASA to make changes.
There are static NAT rules for: Server source IPs(10.1.1.100) to Outside(translated IPs, 88.99.77.44) for a few ports.
Also I added Security policy access rules for LAN: Any to SIP, and Outside: SIP to any.
For NAT:
I can't add this: for LAN: STATIC ROUTER IP 10.1.1.101 (AS SOURCE) UDP 5060 TO OUTSIDE IP 88.99.77.44
(AS TRANSLATED) UDP 5060
Because there is already translation for the Server.
Debugging looks like that now. There is no Received: SIP/2.0, but I can make an outside call with no audio.
116013: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
116014: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
116015: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
116016: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
116017: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
116018: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
116019: Jan 25 15:28:25.588: fb_get_reject_cause_code: ERROR cause_code NULL
116020: Jan 25 15:28:25.600: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:25 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505305
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116021: Jan 25 15:28:26.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:26 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505306
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116022: Jan 25 15:28:27.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:27 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505307
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116026: Jan 25 15:28:57.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam" ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:57 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389preference 1771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505337
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I'll add Incoming dial-peer now.
Not sure what kind of NAT rule should I put into ASA to allow in and out sip traffic.
Appretiate your help.
Thanks a mill. -
Lync 2013 Front End SIP/2.0 500 Compression algorithm refused
I've deployed a brand new Lync 2013 environment hosted on Windows Server 2012 R2 that is currently in co-existence mode with my Lync 2010 environment.
I have SCOM 2012 monitoring the environment and it recently started reporting that one or more of my front end servers
was in a critical state. Diving into it revealed the following perf counter threshold was being tripped:
Time Sampled: 3/26/2014 2:33:30 PM
Object Name: LS:SIP - Responses
Counter Name: SIP - Local 500 Responses
Instance Name:
First Value: 14287
Last Value: 14340
Delta Value: 53
Using OCSLOGGER.exe on the front end to capture logs, i trapped the following:
TL_INFO(TF_PROTOCOL) [11]9138.1C58::03/26/2014-19:12:39.098.0022c780 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[120713120] $$begin_record
Trace-Correlation-Id: 120713120
Instance-Id: 7D80EB
Direction: outgoing;source="local"
Peer: poolA.contoso.com:63820
Message-Type: response
Start-Line: SIP/2.0 500 Compression algorithm refused
FROM: <sip:poolA.contoso.com>;ms-fe=FEserver1.contoso.com
To: <sip:poolA.contoso.com>;tag=F8B88CAB38613EB380773027C56D94AF
CALL-ID: 986f9f568c794ce39d33d7158376157b
CSEQ: 1 NEGOTIATE
Via: SIP/2.0/TLS 10.154.228.225:63820;ms-received-port=63820;ms-received-cid=C3D7C00
Content-Length: 0
ms-diagnostics: 2;reason="See response code and reason phrase";HRESULT="0xC3E93C0F(SIP_E_REACHED_CONFIGURED_LIMIT)";source="FEserver1.contoso.com"
Server: RTC/5.0
$$end_record
The only recent change made to the front end servers was making the registry change outlined in this article:
http://support.microsoft.com/kb/2901554/en-us so i'm wondering if that has something to do with it.The MSFT support person said to re-apply CU5 to the Director servers and reboot. Since this is impactful to the environment and I would have to do reboots anyway, I opted to go the route of installing the more recent update so....
Last weekend I updated my Lync environment with what I think is considered CU6, the September 2014 updates for Lync 2013 Server (https://support.microsoft.com/kb/2809243) and still no luck. The front
end servers are fine; no excess SIP 500 errors occurring there but within 30 minutes of removing the SCOM override on the Director servers the alerts started firing again.
I reinstated the override in SCOM for the Directors and had my case with Premier support un-archived. The MSFT support person said if the alerts didn't go away she was going to have to engage the Lync product group for help. We'll see where it
goes from here.
JKuta
Maybe you are looking for
-
Automatic creation of Cost Object owner in work flow
Hello Experts, Business requirement background is SREQ Contact person just enter cost object and submit for approval.In all cost object cases he can save the service order and submit. After SREQ FRA reviewer approval, before workflow notification mai
-
From G5 to MacPro Quad 2.66 -- Do I need to re-install iWork?
My G5 finally had to be replaced by a new MacPro. I was in a pinch so I migrated everything over, including my programs. Is there any reason to uninstall iWork and iLife to reinstall? Is the version on the G5 the same that would run on an Intel proce
-
Dear Gurus Kindly brief me about making the PO for items such as Stationeries or other items for which there will not be Material Master. I know we should make the Account Assignment 'K and we have to assign the proper account assignment. Here we hav
-
We have SCCM 2012 running in Windows 2008 Server R2 I prepared a WinXP machine where standard application are installed Step that i did a. Create a Image Capture Wizard b. Burn to CD ROM c. Downlaod the http://www.microsoft.com/en-us/download/deta
-
This may be a stupid question but If we have two users. User A who is enabled for conferencing features and content sharing. User B who is restricted to only basic IM&P. The experience we observe is that (by using meet now for example) users attendin