Site pages missing after conversion

Hi: I had a site which had been built in GL1. Today I opened GL2, asked to open the site. The dialogue box appeared saying..."created in earlier version...do you want to convert", and I said yes. I had brought another GL1 site into GL2 this way with no problem. The menus created in MenuMachine
opened without a problem.
With this site however, something went very wrong. I converted and opened the site; however, the menus which were created in Menumachine could not be accessed. Per the instructions from MM, I installed MM2 manually into GL2.
However, when I reopened the converted site, it was far worse. Almost all of the site pages are simply missing. The pages which do appear are missing most (but not all) images, including background images - which makes sense as the image file for the site is missing almost all of the site images.
Any ideas what I did wrong or what could have happened? Or - more importantly - any idea if this problem can be fixed in any way?? This is an enormous worry, as the site is very large. As I said, I brought another GL1 site into GL2 with no problems at all. MM worked without an issue on that occasion.
Please let me know if you have any ideas as to how to proceed.
thx
LR

Oops! I found the solution. Apparently the newer Wiki server does not automatically create links to the created pages so these must be done manually. I think this is a new behavior since I did not have this problem with 10.5. Anyway, I'll have to manually recreate all of the links... Bummer!

Similar Messages

IBook pages missing after syncing.

I purchased a book on the iPad. Started reading it and flicked through chapters it was complete. After I synced iPad to iMac, many pages show encoding error and are missing. What happened?

I have the same problem too. What can be done?

Help My site is missing after publishing changes

I created a site to replace a previously created one already on a server. I first deleted the existing one on the server. I published my new site to the desktop then used Fetch to upload it. Everything was fine, but some changes needed to be made. I fixed any problems in iweb, saved the site, then published to the same desktop folder and ftp-ed the files again only to find my site has disappeared only leaving me with a message of
The requested URL / was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I first tried reuploading the files, next I got rid of the desktop folder and republished a new one then uploaded, then I deleted what was on the server and tried again. Nothing is working and i don't know where to begin to fix this.
the site is www.stairstepstosuccess.com. I notice when I get that error is only says stairstepstosuccess.com (without the www.) and wasn't sure if that was telling to someone more informed.
any help would be greatly appreciated- I'm losing sleep over this

wow! I didn't work for hours last night- which of those steps would you suspect did the job? Or, is there just a delay sometimes?
What a relief! I hope that doesn't happen again

Tags created in album are missing after conversion

I had created an extensive catalog with numerous custom tags in Album 2.0. When I convert my catalog in Elements 7.0 none of my custom tags show up. Is there a way to retrieve these, or do I have to start over (ouch...)
Thanks for any help you can provide,
Kevin Marvel

John/Karin,
When I had first tried to get my Album 2.0 catalog into 7.0 I used the "get photos" menu on a backup of my Album 2.0 catalog. This resulted in the photos coming in, but none of the custom tagging. Since then I have successfully used "restore catalog from CD, DVD or Hard Drive" menu option and after it had restored the catalog I was prompted to convert it to 7.0, which I did. All my tagging, notes, captions came over and all is well! I have only ever had Album starter, Album 2.0 and Elements 7.0.
Good Luck!
Kevin

WHY are there pages missing in my HTML to PDF conversion?!?

Hello all~
upon converting/saving webpages to a PDF file (using the "Convert Webpage to PDF" command), there are pages occasionally missing after the conversion. Sometimes the pages are completely gone & sometimes you can see the pysical page, but it is emply/blank! I've adjustted the settings & such without any success. Please, if anyone can help me, it would be MUCH appreciated!
Thanks in advance~ Joey

Greetings~
I perhaps should have been more specific, as to the particular details surrounding my problem. Actually, "graffity" got me pointing in the right direction. 1st of all, the webpage I was trying to convert to PDF was an email hosted by HotMail. So when I tried to print it using the print icon on my "Command Bar," I would had missing information. Then I noticed a printer icon contained within HotMail. Once I clicked on that icon, it reconfigured the page, whereby I was then able to select the "Convert Webpage to PDF" with the DESIRABLE RESULTS.
In short, if anyone elst has problems saving ALL THE DATA contained within their HotMail, then you MUST 1st click on the printer icon contained WITHIN HotMail... & then you can either print to Adobe OR Convert Webpage to PDF (providing you have the toolbar add-on.
Ciao~

'Add a Page' missing from Site Actions

Hello,
We are having a weird problem on our SharePoint 2013 server where the menu item "Add a page" is no longer in Site Action menu.
All sites are publishing sites and we have custom masterpage with custom pagelayouts too.
We don't have other custom packages/webparts/solutions installed, everything is standard SharePoint except the masterpages and pagelayouts.
There are no javascripts error on the pages. We are running as Site Collection Administrators.
The menu item was there before, it suddenly disappeared.
We also installed the design package on another server and the menu item "Add a page" is there.
There are errors in the logs saying:
0x0D08 Web Content Management
Publishing
8ts5 Unexpected
Exception in file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\Layouts\EditingMenu\SiteAction.xml: Object reference not set to an instance of an object.
84b35a9c-2ef8-e064-6afc-5d6db01cbcc7
Does anyone know what have caused this?
Thanks.

Hi hipplan,
According to your description, my understanding is that ‘Add a page’ is missing in your site.
Whether ‘Add a page’ occurred on a subsite at the same site collection.
This issue seems to be caused by custom something in your master page.
Please deactivate and activate publishing features at site collection level and site level.
Check whether the Wiki Page Home Page is active at the site level.
Then do the followings:
1.Open IIS
2.Click Application Pools
3.Select the web application pool that you use for your site
4.Right-click it, and select ‘Recycling…’
5.Reset IIS
After the above, open the site again, compare the result.
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/15d2899c-9351-488e-abe9-d8ea94cb20f1/publishing-new-page-missing-from-site-action-menu?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

Parent directory paths missing after PDFMaker conversion

I have hyperlinks in a Word document. Relative path links to documents in subfolders (e.g. "subfolder/subdoc.pdf") work fine after conversion to PDF using PDFMaker However, links to a parent directory (e.g. "../parent.pdf") are incorrect after conversion to PDF: the PDF file link is just "parent.pdf".
This is in Acrobat 8 -- has this been fixed in a later version of Acrobat?
Or, am I missing something? Wiring in absolute paths isn't acceptable.
Thanks
Brian

Thanks for the reply! You're correct; this should be under 10.5 mail services. I'm not sure how the post ended up here, though I'm sure it's my fault.
Thanks for the information on what this file does. Permissions are a possibility, but the underlying problem is that the system is looking for the file in the wrong location. The mail isn't at /var/imap/ anymore, and I've renamed /var/imap/ to /var/old_imap/ to spot just this sort of thing. What I'm trying to find is what in the system is still pointing to /var/imap/ and trying to find a file there. If I could find that, then I could repoint it to the correct path and resolve the issue. It looks like the call is coming from postfix (with the master process), but I see nothing in the postfix config files that would make it still look at /var/imap/. That's what puzzles/concerns me.
Did I explain that well? Thanks again.

Place holder is coming after deletion of a components from live site page and distorted the alignmet

Place holder is coming after deletion of a component from live site page and distorted the allignment in IE7. Please suggest.

No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC

Why are my pinned top sites disappearing from the top sites page in Mavericks, after they have been pinned? Very appreciative of any help. This is making me crazy.

Why are my pinned top sites disappearing from the top sites page in Mavericks, after being pinned? Any help would be greatly appreciated.

Why are my pinned top sites disappearing from the top sites page in Mavericks, after being pinned? Any help would be greatly appreciated.

Pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP

pages file document went missing after force quit. cant find it anywhere even after using recovering files softwares. HELP
i was working on a document with pages. while transferring files from USB, the 'pinball' thing popped up for the longest time which lead me to force quit the document. the document had been saved before quitting. however, my macbook starts to reboot, and after rebooting that specific file is missing. Before it quit, it says that the file is locked and asked me to create a duplicate, which i clicked yes to.

Hi,
just to say that while waiting for a help
I decided to go back from zero and moved to a second network (thanks i got some few computers available for my tests ) and this time i run in another trouble wich is the subject of a former post (with no reply...) <<HELP!! "Checksum failed" & "Integrity check on decrypted field failed ">>
http://forum.java.sun.com/thread.jspa?threadID=791804&messageID=9468957#9468957
Seems this always just leads us to problems...
Strange Sun Java Security Team just won't do anything to help us deploy quite easily on one of the most widely-spread platform ( despite we don't like them that much it's MS servers (2000 and 2003) )
Anyway if one could help... on one of the two issues Thanks

My Tasks page in My Site doesnt appear after migration to 2013

We have recently migrated our My Sites from 2010 to 2013. everything has been migrated without issues except that when you click on Tasks in My Site page it takes you to the About me page instead.
This is not the case for new users who are creating their My Site for the first time.
Anyone has had this issue?

Hi CALIG,
Based on your description, your migrated users' MySites will go to "About me" page when click "Tasks" link from quick launch of newsfeed page (e.g. http://mysitehostsite/default.aspx) from mysite host site, but it is working for newly created
user's mysite.
I would suggest you open migrated mysite using SharePoing Designer 2013, see if the AllTasks.aspx page exists, if not, please check if it works with copying one from the newly created user's mysite.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Lost top site page after update

hi all
i did an update yesteday and since then my top site page is just gray and flat where befor it was curved and in colour
any ideas please

thanks for the repy is there ant way to change it back
or it it a case " live with it "

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

Mini calendar in mail missing after Lion installation

mini calendar in mail missing after Lion installation

>After installing Lion (intel I-Mac 2g ram). My Microsoft Office 2004 no longer runs.
Upgrade to a Universal compatible version of Office or equivalent. http://www.neooffice.org/ is the least expensive alternative, though importing Entourage into iCal, Mac OS X Mail, and Addressbook works best if the data was exported from Entourage while still in Snow Leopard.
>Also, when I select "printer friendly" pages in Safari or Firefox, I get a "missing plugin" message.
When you upgraded, did you make sure that Safari was installed in the Applications folder? If not, you may have to redownload Safari from http://www.apple.com/safari/ as it happens to be the same version. Firefox double check is already Lion compatible. For more on upgrading to Lion, see my FAQ*:
http://www.macmaps.com/upgradefaq.html#LION

Site pages missing after conversion

Similar Messages

Maybe you are looking for