SLD and Integration content in software lifecycle

Is is recomeded to have one SLD. In this case all SAP System (dev, test, production) are registered in one SLD. Am I correct?
How do I have to manage Integration Directory content? Cofiguration data is the same for test,dev, prod except system name.
Do I have to recrete ID content for test, dev, prod? Is there a better way?

Hi,
The preffered way is to keep Production SLD different then the dev/Quality SLD.
You can transport the ID object the same way as your IR objects. Before activating the object make the required changes in the Communication channels.
PS Activate all the object belonging to one change request together.
Regards
Vijaya

Similar Messages

Dependency bw SLD and Integration Repository

can you explain how Dependency bw SLD and Integration Repository is created???

In the post installation tasks, the dependencies are added via ABAP (sldapicust and SM59) and Java (exchangeProfile and Java Admin Console)
This link shows the conenctions between ABAP and Java to SLD
http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm

Retrieving SLD and Integration builder username and pwd's

Hi,
I forgot my SLD and Integration builder username and pwds. my SLD pwd locked. Plz help me on this.
Thanks,
Satya

Hi Satish,
you can unlock your user and use the same user after unlocking.
Go to SU01 and unlock your user. If you dont have access to SU01 contact your Basis/Security team so that they could be able to do it for you.
Regards,
Naveen

Why my Local Adapter Engine not showed in SLD and Integration Directory?

Hi guru,
I have installed one Local Adatper Engine on Host B, then an XI is installed on Host A, but After I installed the local adapter engine and follow the standard configration step mentioned in this document:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/307deae3-604e-2a10-feae-f016fb9cadd4.
After the configuration is done, I restart the local adatper engine, but this local adapter engine is not showed in integration directory.
what is the problem?

The post-installation configuration steps are not complex, I exactly followed.
what other reason could it be? have any guru configured local adapter engine before?

V I Engineering, Inc has immediate needs for Systems Engineers (Contract) and Senior Systems Engineers (Contract) (reporting to the Test Software and Integration Group Manager)

Company: V I Engineering, Inc.
Locations: Various - USA
Salary/Wage: $negotiable
Status: Hourly Contractor
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience required)
Career Level: Intermediate/Experienced
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer Contractor to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have very high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design, development and installation of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box. You will be available to spend extended periods at our customer sites to complete system installations.
Required
5+ years of Systems Integration experience
3+ years LabVIEW experience
1+ years TestStand experience
Experience in Implementation and Delivery of Test Systems, including integration
Experience in ATE usage and development
Experience in building and Integrating Mechanical Fixtures
Experience in Understanding the design of Circuit Boards as they relate to a total system, and their fault-finding
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience
TortoiseSVN
V I Package Manager (VIPM)
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 50%.
V I Engineering, Inc. offers a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer (Contract) employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Edit
Jeff

V I Engineering, Inc has immediate needs for Systems Engineers and Senior Systems Engineers (reporting to the Test Software and Integration Group Manager)

Company: V I Engineering, Inc.
Locations: Positions available in our Farmington Hills, MI Office
Salary/Wage: $negotiable
Status: Full Time, Employee
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience preferred, but not required)
Career Level: Intermediate (Non-Manager)
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design and development of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box.
Required
5+ years of Systems Integration experience
Experience in Design and Implementation of Test Systems, including integration
Experience in ATE usage and development
Experience in reviewing of Mechanical Fixtures
Experience in understanding the design of Circuit Boards as they relate to a total system
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
LabVIEW/TestStand experience
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience (statement coverage, code size, reuse measurement, etc)
TortoiseSVN
V I Package Manager (VIPM)
UML
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 25%Re
location assistance is possible.
V I Engineering, Inc. offers incredible opportunities to grow and advance your career, a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Edit
Jeff

Update integration directory and repository content after PI system copy

We are on PI 7.1, We are trying to figure out the best way to update the contents in sld, integration directory and repository after system copy. currently we delete everything in sld, ID and IR then reimport all the content to get everything in-sync. Is there an easier way to do it, ex. just update the system in sld and the matching contents in IB and IR?
Thanks,
Jane Zhou

Hi Jane
This completely depends on the nature of the system copy and your SLD architecture and operational requirements
Will the source system remain available or operational ?
Is the target SLD proposing to use satellite systems already defined in the source SLD ?
When doing a system copy the following should be considered
1) If you create an import line from a previous SLD via export or sync
- that SLD has to continue to be available for further updates or sync
2) If you create a system copy, any target specific configuration like hostname, port, SID
may needed to be adapted in target landscape
3) Further considerations are needed if 1 satellite will point to 2 SLDs at the same time both for operational use
Its very easy to take a back-up or full or partial import from one SLD and put it into another or indeed sync between SLDs
however the key is to ensure the target SLD content is consistent and useable in the same way as the source SLD
Hope this helps
Stuart

SLD and Software Component versions Import

When I try importing Software Component versions from SLD, I was not able to see what I created in SLD. All of the created Software components ( there are some software components created earlier and are in Production as well ) are not visible during import into Integration Repository.
Thanks

Hi,
<i>All these checks are done and we will not able to connect to SLD if there is a problem right?.</i>
>>>These checks will help you to make in sync with SLD and the repository..
If you are not able to see the SWCs in the SLD itself, then check with other user ids ...During SLDCHeck is it pointing to correct SLD ?
Check out this SAP note- 764176 It may help u
Regards,
Moorthy

What is the correct CIM model and CR content version to import into SLD?

Hi All,
I just met a difficulty that I can not find the correct import version of CIM model and CR content.
Could anyone share some valuable suggestions?
Situations now:
I installed ECC6 SR3 with ABAP+ Java stacks, after installation successfully, I logged onto SLD through http://xxx:50000/sld
since my CIM model and CR content version is too low, so I want to upgrade it.
The currect version is as below:
Model Version (sld/new):     1.5.24
SAP CR Content Version (sld/new):     SAP_CR 2.0 (produced 03/17/2005)
Namespace     Model Version     Classes     Instances     Associations     Total Objects
sld/active      1.5.24               908     36381     60183             97472
I have read note 669669 carefully and downloaded all the relevant versions before updating, the the results are not correct. something like "Unknow status -1" "import anyway" appears.
So, could anyone tell me the correct update file and sequence?
Thank you very much in advance.
Best regards,
Nick

Hi Raghu,
Thanks for your quick reply.
I have downloaded 5 files:
cimsap51506_0-20005942.zip     SP06 for SAP CR CONTENT UP TO 2009
CRDelta1418_0-10003379.ZIP     SP18 for SAP CR CONTENT 2.0
CRDelta1511_0-10004549.ZIP     SP11 for SAP CR CONTENT UP TO 2007
CRDelta41514_0-10006428.ZIP     SP14 for SAP CR CONTENT UP TO 2008
CRDelta51506_0-20005942.ZIP     SP06 for SAP CR CONTENT UP TO 2009
and the update sequence are the same as above, that is to say, first I update CIM model version successfully from 1.5.24 to 1.5.45, and then, I upload CRDelta1418_0-10003379.ZIP which gave me an error message "Unknown status -1", even how many times I click "Import anyway", it's useless.
after then, I tried to upload CRDelta1511_0-10004549.ZIP directly, but it also refused. warning message is "The selected aggregate import is not applicable to the current content version SAP_CR 2.0 of the target namespace.", I clicked button "Import anyway", but it's useless since there contains 0 objects, I don't know why, the message shows "The import will upgrade the content of export line SAP_CR from the current version 2.0 to version 4.0.
Contains 0 objects."
The file CRDelta1511_0-10004549.ZIP is under SAP CR CONTENT UP TO 2007, why its version is 4.0? is it because I need to firstly update to 3.0? and where can I find version 3.0?
I really appreciate your kind help.
Best regards,
Nick

Integration between SAP and third party tax software

can some body explain me or provide me docs regarding integration between sap and third party tax software like vertex.
Thanks

Hi
First configure the same via the following menu path:
1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
2.) Then test connection (option is available there).
3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
System Information>Function List
Check if the following functions are listed:
RFC_CALCULATE_TAXES_DOC
RFC_UPDATE_TAXES_DOC
RFC_FORCE_TAXES_DOC
RFC_DETERMINE_JURISDICTION
4.) Then test the tax data retrieval:
From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
The above 4 steps are necessary to satisfy that the RFC connection is established
Hope useful
S Jayaram

While trying to restore os x and erase content, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen and will not progress.

While trying to restore os x and erase content on my MacBook pro, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen with an apple and will not progress. I've waited more than 30 minutes and tried restarting again by holding the power button. Also, restore cd 1 will not eject so the computer will no longer move past the gray screen with spinning circle. Restore CDs had never beeused and were still in packaging in the original box. Ran hardware test just to check, and it came back as normal. Now what? I live nowhere near a genius bar :(

computer asked me to restart and try again by clicking restart button.
That's called a kernel panic...
Since the install disc won't eject, try starting up while holding down the C key. If the Mac won't boot while holding down the C key, try ejecting disc by either holding down the mouse while starting up or holding down the Eject key while starting up.
Try booting from your install disc so you can run Disk Utility in case the startup disk needs repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
What is a kernel panic
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics

Which dc and sc should add in build time form sld when integration uwl

hi
i have to create a webdynpro to show info from uwl, like follow
IUWLService uwlService=(IUWLService)PortalRuntime.getRuntimeResources().getService(IUWLService.ALIAS_KEY);
but i don't know which dc and sc i should add in build time form sld and use it.
i try add UWLJWF from sld, and ?
i develop with nwce ehp1
thank you

1) tc/je/security/api
2) tc/je/usermanagement/api
from ENGFACADE.
3) tc/kmc/bc.uwl/api
from UWLJWF

Registration of systems in SLD and SMSY (Configuration of Managing System)

Hi folks,
I´m following this documentation here "How to Configure Maintenance Optimizer to Use Software Lifecycle Manager to Automatically Download and Deploy Support Packages and SAP Enhancement Packages" and on the pre-requisites are 2 things that i don´t uderstand:
1. The SLD server is running.
2. You are logged on to the Visual Administrator of the J2EE Engine as an administrator
what is it?

Oi Nelson
basicamente o documento diz para vc ter seu SLD configurado corretamente (ou seja, com todos dados do seu landscape atualizado - fundamental para gerar o arquivo XML de upgrade/support package stack apropriadamente) e para vc estar logado no Visual Admin com o usuário J2EE Admin :-)
Pelo tom de sua pergunta, imagino que vc não saiba ao certo o que é e para que serve SLD e Visual Admin. Aqui vão alguns links bem úteis:
http://scn.sap.com/docs/DOC-8042
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1870c690-0201-0010-fca0-b66794ea3ea3
http://help.sap.com/saphelp_nw70/helpdata/en/ee/74b3407e73c57fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c46577095735b6e10000000a42189d/content.htm
e
http://help.sap.com/saphelp_nw70/helpdata/en/39/83682615cd4f8197d0612529f2165f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/23/fa1f1e5f6841cf92c64dc19d79f290/content.htm
http://scn.sap.com/people/heidrun.reichart/blog/2006/11/24/how-to-use-sap-netweaver-administrator-with-sap-s-java-platform-enterprise-edition-5
Espero que isso ajude :-)
Abraços,
Tomas Black

Problems in SLD and Cache refresh (SXI_CACHE).

Dear Experts,
I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says No Business System for ABC Client 100 ".
where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log Snippet:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_ABC
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current client

Hello,
Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
Hope this helps you..
Regards,
Jazz

Can't read SLD from Integration Builder

Hi Experts,
When we select the option "Transfer from System Landscape Directory" and "Import Software Component Versions", we get the following error:
"Unable to read software component versions from System Landscape Directory".
If you have encountered this error in the past, please can you share the solution?
Thanks and regards,
Brendon

Hi Brendon,
Check it you have imported correctly the ESR content following one of the notes below
according to your system version:
PI 7.1X:
#1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
XI 7.0:
#836200 - SAP NetWeaver 7.0: Importing Process Integration Content
XI 3.0:
#705541 - XI 3.0 (SP1 and higher): Importing XI Content
Regards,
Caio Cagnani

SLD and Integration content in software lifecycle

Similar Messages

Maybe you are looking for