SLD and NWA

Hi,
I have configured SLD. I am able to see both ABAP and Java systems in the SLD,
In visual admin tool I have all SLD applications running,
But now when I start NWA it gives me a message saying that SLD Server is not started.
Can anyone please guide me how to overcome this issue.
Thanks in advance,
CD

Hi CD,
Try this.. go to http://<your host>:<your port>/sld and login with user having admin authorizations..
click on administration -> then click on start server button, this should start SLD..
If that does not work, Verify whether you have followed these steps are not..
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/configure%2bsld%2bfor%2bjco%2band%2bcreation%2bof%2bjco%2bdestinations
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
. Consider reward points if helpful.
Regards,
Uday.

Similar Messages

Problem with SLD and Creation of JCo

Hello everyone!
I have a problem with the SLD and the Creation of JCo on the Portal, in trying to create the JCo always tells me that the name used there in the SLD, being that the facility is new.
Who performs the installation, set in the SLD the ECC 6 PRD, delete it to see if I could create a JCo but still the error again when creating the ECC 6 PRD in the SLD I said that already exists and can not create it.
I found a forum which recommended re-import the cimsap .... .... zip and zip CR_Content which would clean everything, I managed to import the zip cimsap ... but in trying to raise CR_Content gives me the following message "All incremental updates of the selected aggregate import for export SAP_CR line have already been loaded before. You require a newer import to update your current content SAP_CR version 4.11." .
I recommend, do the installation again, reload the cimsap.zip and CR_Content.zip a copy homogeneous.
from already thank you very much
Text of error to create JCo destination
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
    at at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
    at at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1)
Version null
DOM version null
Client Type msie7
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0017.20081210091801.0000 (release=NW04S_17_REL, buildtime=2009-01-12:09:43:27[UTC], changelist=52884, host=pwdfm114), build date: Tue Apr 28 19:28:39 CLT 2009
J2EE Engine 7.00 patchlevel 48199.450
Java VM IBM J9SE VM, version:2.2, vendor: IBM Corporation
Operating system Linux, version: 2.6.18-92.el5, architecture: amd64
Session & Other
Session Locale en
Time of Failure Fri Aug 28 11:43:53 CLT 2009 (Java Time: 1251474233677)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Hello!!
The "SLD" with which I am working up to Portal, the "ECC" installs itself as "ABAP.
Who did the installation and initial configuration, do not leave any documentation about it.
Now I need to create the systems and "JCo" necessary to enable them to implement the "ESS", but errors are presented above.
Some days ago I managed to update the CR_Content, which allowed me to create the "JCo" but at the time of the test, says' com.sap.mw.jco.JCO $ Exception: (103) RFC_ERROR_LOGON_FAILURE "name or password incorrect .
I managed to also create the portal systems, "System Administration -> System Configuration -> Content Portal" and to test it fails on "Test Connection with Connector", which as noted is associated with the connectors "JCo".
For the creation of the system, I think I should create something in the Visual Administrator ", but within the documentation that I do not see anything about it.
thanks for your help!

Problems in SLD and Cache refresh (SXI_CACHE).

Dear Experts,
I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says No Business System for ABC Client 100 ".
where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log Snippet:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_ABC
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current client

Hello,
Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
Hope this helps you..
Regards,
Jazz

Need latest SLD and NWDI version for PI 7.1 EHP1

Can any one update me the latest SLD and NWDI version for PI 7.1 EHP1?
Kindly provide me the path of implementation guides for SLD, NWDI which can be used with PI 7.1 EHP1. For PI 7.1 EHP1, can we use the same version of SLD and NWDI which used IN PI 7.1?
Please help me for the above questions.
Regards,
Yuvaraj.

Hi Yuvaraj,
Please check the NWDI Development Infrastructure 7.11 and SLD 7.11 for the PI 7.1 EHP1.
Go to Service Market Place - Software Download > Support Packages and Patches > Support Packages and Patches - Entry by Application Group > SAP NetWeaver and complementary products > SAP NETWEAVER PI > SAP EHP1 FOR SAP NW PI 7.1 >Entry by Component > Development Infrastructure.
Hope it will helps
Regards
Arun Jaiswal

Settings SLD and JCO connection for Java Web Dynpro

Hi BI Gurus,
I'm a Business Intelligence newbye and I'm a bit confused about Web Dynpro configurations.
I try to execute, through Netweaver Developer Studio 7, a simple java Web Dynpro who call the standard Flight List BAPI.
My configuration is: NW 2004s installed on BI server (with java instance and j2EE Server) and Flight List BAPI stored on R/3 ECC. 5 System in another server.
Now, my doubt are:
1) in SLD Data Supplier (J2EE Visual Admin on BI Server) CIM configuration, what are the connections parameter necessary?The BI host or R/3 host?
2)if I set BW system parameters in SLD and in NWDS when I try to run my simple web dynpro an error occour This is the output:
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_FLIGHTLIST_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
Correction Hints
Accessing the System Landsape Directory (SLD) failed. Depending on the concrete reason (see root cause) check the following:
is the SLD Supplier in the J2EE engine configured correctly? See the SLD documentation for more details about the SLD and about how to configure it.
are all JCO destinations maintained correctly? Use the preinstalled Web Dynpro Content Admin application to check/edit the destination. Use the Ping and Test functions of the Content Admin to verify that each destination is properly configured.
Additional information about the System Landscape Directory and the Web Dynpro Content Admin can be found in the SAP Developer Network (SDN) and in the Online Help for the SAP Web Application Server (installed with SAP NetWeaver Developer Studio and available online).
Note: the above hints are only a guess. They are automatically derived from the exception that occurred and therefore can't be guaranteed to address the original problem in all cases.
3)where can I create new JCO connections?What are the requirements settings?
I am always available for answers about the post!!
Help me please!!
Thanks thousand and sorry for my incorrect english!!

Andrea,
You can Create the JCo destination from Content Administrator. You must login as Administrator.
use the link as
http://<server>:<port>/webdynpro/welcome/Welcome.jsp, select Content Administator->Create JCo Destinations/Maintain JCo Destinations.
Please have a look on the following links regarding creating/maintaining JCo destinations. The are usally asked questions regarding JCo destinations.
Create JCo destinations:
/message/4947478#4947478 [original link is broken]
Creating JCO Destinations
/message/5369333#5369333 [original link is broken]
Rgs,
Dni

503 Service Unavailable? unable open irj/portal and NWA for SAP CE 7.3 trial version

Hi Experts,
I am not able to open irj/portal and nwa for my recently installed SAP CE 7.3 trail version.
Only start page is opening.
SAP J2EE engine and data base is up and runing.
1.
Time
2014 07 03 10:18:04:932
Severity
Error
Filename
defaultTrace_00.3.trc
Details
SourceName: com.sap.engine.services.deploy.server.TransactionManager Location: com.sap.engine.services.deploy.server.TransactionManager DCComponent: servlet_jsp CSNComponent: BC-JAS-WEB User: Guest Session: 0 CorrelationID: 4699250000000003 DSRTransaction: f0452ed0026911e48a26000c29f14d18 DSRRootContextID: F0452ED0026911E48A26000C29F14D18 DSRConnection: f0452ed0026911e48a26000c29f14d18 DSRCounter: 0 ThreadName: Thread[HTTP Worker [@1380566121],5,Dedicated_Application_Thread] TimeZone: +0530
Text
Global [startApp] operation of application [sap.com/tc~lm~itsam~co~ui~nwa~localnavigation~wd] failed with errors on server process [4699250].
Thanks,
Amith.

Hi Mayank,
I am not able to access index.html page it shows 404 error,
Main page is opening.
please provide path for dev_server0 and stdout_server0 logs i will update.
Thanks,
Amith.

SLD and ID Settings

Hi group,
I am working on ABAP Proxy Interface,could you please let me know what are the settings I have to make in SLD (Business Systems)and Integration directory.RFC destinations,it is working fine.

Hi,
You have to create a Busciness System in SLD as WebAsABAP. and you
Regarding Proxy Scenario We need 3 RFC destinations in R/3 System.
STEP1:
1.TCP\IP connections
1.1.LCRSAPRFC
1.2.SAPSLDAPI
2.Settings are to be done in SLDAPICUST transaction
3.Http Connection: -
3.1.PI_INTEGRATIONSERVER
Purpose of LCRSAPRFC:
In order to get the interface details in SPROXY transaction.
Purpose of SAPSLDAPI
To connect to SLD and get the respective business system name maintained in SLD,
Purpose Of SLDAPICUST
Next Execute transaction SLDAPICUST to maintain the SLD access data.
Purpose of PI_INTEGRATIONSERVER
Create a destination of type H in transaction SM59.This connection is used to send the message to the Integration server
STEP2:
Creating IR and ID objects in XI.
STEP3:
goto SPROXY tcode in R/3 and create Proxies on MI in R/3. And Impliment Interface and call the proxy using Report.
Thanks.

Error 403 and 500 when trying to connect SLD and IR,ID

Hi all
i have installed xi in my system. iam getting an error 403 and 500 when iam trying to connect to sld and ir,id. I think we have to set the roles .i don't know how to set the roles. please help me in this issue.
thanks in advance.
s.reddy

Reddy,
For 403 error take a look at: note 698017
ICM Patch Collection (VII)
Also go through the thread:
403 ERROR
For 500 error go through the threads:
500 internal server error
500 Internal server error
---Satish

Dependency bw SLD and Integration Repository

can you explain how Dependency bw SLD and Integration Repository is created???

In the post installation tasks, the dependencies are added via ABAP (sldapicust and SM59) and Java (exchangeProfile and Java Admin Console)
This link shows the conenctions between ABAP and Java to SLD
http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm

SLD and Software Component versions Import

When I try importing Software Component versions from SLD, I was not able to see what I created in SLD. All of the created Software components ( there are some software components created earlier and are in Production as well ) are not visible during import into Integration Repository.
Thanks

Hi,
<i>All these checks are done and we will not able to connect to SLD if there is a problem right?.</i>
>>>These checks will help you to make in sync with SLD and the repository..
If you are not able to see the SWCs in the SLD itself, then check with other user ids ...During SLDCHeck is it pointing to correct SLD ?
Check out this SAP note- 764176 It may help u
Regards,
Moorthy

SLD and Sender Agreement

so here is the problem in case some of you can help me with the obvious....
I need to interface with an SQL database....
I go to the SLD and create a product, a software component, a technical system and finally a business system (and I assign it to our SLD)....
But, when I go to my configuration scenario and try to create a sender agreement, I don't see the service for my newly created Business System....
any ideas?
thanks,
Marc

Hi there,
Are you mean to use SQL Server database as an RDBMS system to persist data using SQL operations or Process Data using SQL operations?
Then, as like any application, an Appliction system use RDBMS as a transaction aware storage system to work with data.
In XI inside the SLD the same way you have to only a business system of the type of ABAP or JAVA and using the JDBC adaptor sender and receiver communication channel you can create any RDBMS operation with the database.
When you configure the scenario inside Integration builder (Configuration tool)
Make sure you have done the following system
1. Business systems created in SLD
2. Business systems associated with a given technical system
3. All the XI product and component on which you have created the integration artifacts associated with your scenario is selected for the newly created business system.
4. SLD cache is updated from the configuration tool
5. Business systems are associated with the SERVICEs without party
6. Channels created for the newly added services
Then you can use the business system either in a service consumer or receiver using the associated JDBC sender channel or receiver channel.
Thanks

Retrieving SLD and Integration builder username and pwd's

Hi,
I forgot my SLD and Integration builder username and pwds. my SLD pwd locked. Plz help me on this.
Thanks,
Satya

Hi Satish,
you can unlock your user and use the same user after unlocking.
Go to SU01 and unlock your user. If you dont have access to SU01 contact your Basis/Security team so that they could be able to do it for you.
Regards,
Naveen

Installing SLD and PI7.0 steps

Hi Experts,
I want to know following points.
1) How and when do we install SLD ? Do we install it before actual PI installation or it is installed automatically when we install XI
2) Can someone please write down all the steps (very brief) which we should follow to install complete SAP PI system from scratch including SLD, Java and ABAP parts.
Regards,
Grewal

Do we need to install SLD separately from XI ot it get installed automaticall when we install XI.
as a good practice you need to have a minimum number of SLDs in your landscape
you can have a separate SLD for your XI/PI
XI is dependent on SLD.....SLD is independent whether XI is there in the landscape or not...
You can separately install SLD and then establish the connection to your XI system
Regards,
Abhishek...

How to push System-Data to the SLD ? NWA 7.11

How can i push the data from a J2EE-system to the SLD that is connected/configured in the NWA (Destinations) ?
In older versions of NWA there's being a 'collect and send'-button...
best regards
Christoph
Edited by: Christoph Bastian on Aug 17, 2011 3:46 PM

Hi,
Perhaps this link could help:
http://help.sap.com/saphelp_nwce711/helpdata/en/48/b6847d96655295e10000000a42189b/frameset.htm
The SLD_DataSupplier and SLD_Client destinations should be set in NWA -> Configuration Management -> Security Management -> Destinations
Next under Configuration Management -> Infrastructure Management -> SLD Data Supplier Configuration. Collect and Send exists to send the data to SLD.
Regards,
Srikishan

PI 7.1 - Problem with SLD and Runtine WorkBench

Hi All,
I have installed PI 7.1 on Solaris with Oracle DB.
When i go to http://<hostname>:54600/dir/start/index.jsp and click on System Landscape Directory its opening the following link:
http://54600:54600/sld/index.html (Instead of hostname its taking 54600 where 46 is our instance Number).
Could you please suggest me whether the above error is due to any parameter wrongly set? i have checked all the exchange profile parameters and everything is fine.
If this is the problem with configuration of SLD, Can I re-configure SLD? if so please guide me how to do that.
Even when i login into Runtime Work Bench and clcik on any option like Component Monitoring or Message Monitoring its taking long time stating "Query being Processes", i waited for long time and then the same error unable to reach "http://54600:54600 "
Could you please suggest me how to proceed further?
Thanks,
Subbu

Hi,
     Please check the following configurations:
ABAP stack:
1. SLDCHECK -    check the error.
2. SLDAPICUST - check the 'Host name'
Then, in browser;
http://<hostname>:54600/exchangeProfile
click and expand 'connections' -
com.sap.aii.connect.cr.name   - fully qualified host name
com.sap.aii.connect.integrationserver.sld.name -    is.<instancenumber>.<Hostname>
com.sap.aii.connect.landscape.httpport - 5 <instancenumber> 00
Use fully qualified host name where ever the host name is asked.
Once you edit the exchange profile, not necessary to restart J2ee Engine. Just refresh and check the value are changed.
Hope this will fix the issue.
Sunil Shetty.

SLD and NWA

Similar Messages

Maybe you are looking for