SLD Data Bridge not starting

Hello,
I have installed XI 3.0, have patched the ABAP & JAVA stack to SP14.
During SLD configuration we are getting error in RZ70, while collecting data for transfer it gives RFC error for destination SLD_UC.
Also in http://dqxicom5702:50000/sld while trying to start to the sld bridge it fails to do so.
Error: Bridge not started
In visual administrator, on triggering data transfer it gives error:
data transfeer failed as there is no process to collect data.
Supporting Logs:
RZ70 Output:
0: DQXICOM5702_DXI_00                        : Collection of SLD data finish
0: DQXICOM5702_DXI_00                        : Data collected successfully
0: DQXICOM5702_DXI_00                        : RFC data prepared
0: DQXICOM5702_DXI_00                        : Used RFC destination: SLD_UC
0: DQXICOM5702_DXI_00                        : RFC call failed: Error openin
0: DQXICOM5702_DXI_00                        : Existing periodic jobs remove
0: DQXICOM5702_DXI_00                        : Program scheduled: 20051220 0
0: DQXICOM5702_DXI_00                        : SLD job for system start: Pro
Server logs in sld shows that data was recived from host, but could not be accepted as SLD Bridge is not running.
defaultTrace.trc Output:
Date : 12/19/2005
Time : 14:57:51:507
Message : User J2EE_GUEST, IP address
HTTP request processing failed. HTTP error [401] will be returned. The error is [Access Denied.No details available].
Severity : Error
Category : /System/Server
Location : com.sap.engine.services.httpserver
Application :
Thread : SAPEngine_Application_Thread[impl:3]_19
Datasource : 5297450:/usr/sap/DXI/DVEBMGS00/j2ee/cluster/server0/log/defaultTrace.trc
2nd Error:
java.net.SocketException: There is no process to read data written to a pipe.
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java(Compiled Code))
     at java.net.SocketOutputStream.write(SocketOutputStream.java(Compiled Code))
Has anyone faced SLD Bridge problems. All suggestions are welcome.
Thank YOu.
Cheers,
Chetan Hinduja

Dear,
Would you don;t mind if I ask your methods to resolve it ?
What authorization(s) for which user(s) can be resolve this problem ?
Thanks in advance.
junior.

Similar Messages

Bridge not started

hi people,
actually i ve installed a double stack(2004s) with pi 7.0 n i ve updated java with sp14 the sld was up and running till then after the upgrade the sld sever is stopped it throws an error when you press start server in administrator the error is "Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [001279CD6BEB0075000000C100001CC00004412474162ADD]"
the reason behind this is that sld bride is not starting. I want to know how to start this sld bridge.
thanks in advance
Ajit

I am having the same problem - did this problem get resolved?
SP15
2 X CIM Errors (CIM_ERR_FAILED: Object manager is not activated)
1 X Bridge Not Started
1 X C_SAP_InstalledProductOnApplicationSystem
#4 04/10/2008 11:30:01.159 [SAPEngine_Application_Thread[impl:3]_4] ERROR com.sap.lcr.webui.gen.ClassSelector: enumerateClasses: null More...
#3 04/10/2008 11:27:48.81 [SAPEngine_Application_Thread[impl:3]_26] ERROR com.sap.lcr.webui.gen.ClassSelector: enumerateClasses: null More...
#2 04/10/2008 08:59:22.915 [SAPEngine_Application_Thread[impl:3]_19] ERROR com.sap.lcr.webui.gen.ClassSelector: enumerateClasses: null More...
#1 04/09/2008 16:51:42.521 [SAPEngine_Application_Thread[impl:3]_18] WARNING com.sap.lcr.sagent.DataSupplierServlet: Request ignored! Received data for SLD bridge from 127.0.0.1. Bridge not started.
#0 04/09/2008 16:47:05.272 [SAPEngine_Application_Thread[impl:3]_13] ERROR com.sap.lcr.sagent.BridgeIniServlet: Error during bridge servlet init More...
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: 00145E697288006A0000010000000A3400044A70EC249BDF
#0 04/09/2008 16:47:05.272 [SAPEngine_Application_Thread[impl:3]_13] ERROR com.sap.lcr.sagent.BridgeIniServlet: Error during bridge servlet init
Thrown:
java.lang.NoSuchFieldError: C_SAP_InstalledProductOnApplicationSystem
at com.sap.lcr.sagent.specificbuilder.AbstractBuilder.<clinit>(AbstractBuilder.java:41)
at com.sap.lcr.sagent.BuilderDirector.createBuilders(BuilderDirector.java:142)
at com.sap.lcr.sagent.BuilderDirector.initDestinations(BuilderDirector.java:216)
at com.sap.lcr.sagent.BridgeIniServlet.readBridgeDestinations(BridgeIniServlet.java:26)
at com.sap.lcr.sagent.BridgeIniServlet.init(BridgeIniServlet.java:34)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:139)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

SLD Server can not start

Dear Experts, 
I need your help... 
 
I installed ABAP+Java stack (ECC6.0 and SAP J2EE Engine/7.00 PatchLevel 109886.44). 
When I view http://myserver01:50000/sld, I saw that the SLD server is stoped and I can not start it even I click "Start Sever button", system gave me error message "Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes.". 
 
I checked the log in Administration tab, the log said: 
=========================================== 
#4 12/20/2009 19:40:06.390 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.start.StartDirector: SLD start failure, unable to activate the SLD CIMOM. Check the log of the persistence medium for any errors. If the error is reproducible, please send a message to SAP. More... 
#3 12/20/2009 19:40:06.375 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.objmgr.core.TransactionContainerChangeBuffer: Storing changes to cache failed. Please restart the application to reinitialize the cache.(Error: CIM_ERR_FAILED: Failed to initialize cluster notification sender.) More... 
#2 12/20/2009 19:40:06.375 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More... 
#1 12/20/2009 19:40:06.31 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More... 
#0 12/20/2009 19:40:06.31 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More... 
=========================================== 
 
Could any one tell me how to start up the SLD? 
More information: When I click Administration>details>Data, I saw: 
================== 
Nothing Available 
Model Version (sld/active): No model loaded 
SAP CR Content Version (sld/active): (SLD server stopped) 
================== 
But when I checked the location of E:\usr\sap\EC6\SYS\global\sld\model, I can see cimsap.zip and CR_Content.zip files there. 
 
 
 
Further more, I was a little bit confused about the SLD HTTP Port, that is during the installation parameter setting phase (SAP Sytem-> Central SLD), I choose SLD destination as "Register in existing central SLD(default)", and set SLD port to "8089", SLD Data Supplier User as "SLDDSUSER", but I can not find user "SLDDSUSER" in ABAP SU01, it's very strange. when I tried to view http://myserver01:8089/sld, it said "Page can not be found", could you tell me what's the difference between these two URL: Http://myserver01:8089/sld and http://myserver01:50000/sld? 
 
There are totally two questions(one problem and one question) of mine, any suggestions is welcome and it's surely that I will follow up and close this thread for the effective solutions.
 
Thank you very much in advance. 
 
Best regards, 
Nick 
 
Edited by: Li Nick on Dec 20, 2009 5:33 PM
Edited by: Li Nick on Dec 20, 2009 5:34 PM

Hi Nick,
1. Is SLD a pure java component that ABAP system should connect it through gateway port (JCo or something else..) and Java engine connect it directly with HTTP/HTTPS?
Above statment is right
2. So, the mechanism of Solution manager to manage all the systems is also based on SLD? Can we monitor all the system landscape without Solution manager, just SLD instead?
SLD is central repositoy to store system data present in landscape , Solution manager is used to monitor all the system using SLD also.
We can't montior system by just using SLD.
3. The functionality of the Visual Administrator->Cluster->Server->Services->SLD Data Supplier is to provide user inforamtion of the system that will be registered info. onto the SLD server, not configuring the SLD Server? (SLD is configured through Webpage port 50000 and to-be registered server is configured through Visual Administrator?
SLD Data Supplier is a area in As java system where you provide the information of existing SLD system ( the Exisiting SLD mean where SLD services is running )
SLD is purely java component
user SLDDSUSER belongs to the "TO-BE Registered" system, not the SLD server, am I understanding right?
SLDDSUSER belong to SLD server
so, the event of "Trigger SLD data transfer" is to send system information to the SLD Server
Yes.
Thanks
Anil

SLD Data Bridge Synchronization

Hi All,
I need to automatically synchronize SLD data from my CE 7.1 SLD system to Sol Man 7.01 system with the help of data bridge automatically. I know there is new feature call Data Synchronization available from 7.1 system, but with this it is able to do for lower versions like 7.01?
Please let me know, whether we have got any SAP Document for this?
Thanks,
Anand.

HI,
what imformation do you want to transport to your solm system. you can use sld ->adminsitration->Data Suppliers.
here you can " Update Other SLDs" but there will be some information (like bs) which you could not synchronize
to your solm sld.

SLD server will not start

Hi, I am having an issue with my SLD server. The java will not start completely. This is the log i get:
If you have any clue that would be great.
thanks
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[Cp1252]/>
<!FILESET[0, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.19.trc]/>
<!NEXTFILE[defaultTrace.1.trc]/>
<!LOGHEADER[END]/>
#1.5#000BCDEF4B75001E0000000100000B4400046A834059524E#1243011859688#com.sap.di.sdic.srv.java.SDICServiceFrame##com.sap.di.sdic.srv.java.SDICServiceFrame#######SAPEngine_System_Thread[impl:5]_70##0#0#Error#1#/Applications/SDIC/Service#Java###Failed to initialize the SDIC service. An unanticipated error has occured; Error description - #1#com.sap.di.sdic.exception.DiException: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"#
#1.5#000BCDEF4B75001E0000000300000B4400046A8340596B1D#1243011859688#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_70##0#0#Error#1#/System/Server#Plain###Service tcdisdic~srv error. Nested exception is: com.sap.engine.frame.ServiceException: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"
 at com.sap.di.sdic.srv.java.SDICServiceFrame.start(SDICServiceFrame.java:162)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.di.sdic.exception.DiException: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"
 at com.sap.di.sdic.srv.java.SDICServiceFrame.start(SDICServiceFrame.java:149)
 ... 5 more
Caused by: java.lang.Exception: StateStore Initialization requires the values to be specified for the properties"sdic.state.store.storeManager" and "sdic.nwdiservers.admin.user"
 ... 6 more
#1.5#000BCDEF4B7500260000000000000B4400046A8340A5D8ED#1243011864701#com.sap.caf.um.metadata.imp.MetaDataTools##com.sap.caf.um.metadata.imp.MetaDataTools.MetaDataTools()#######SAPEngine_System_Thread[impl:5]_54##0#0#Info#1#/System/Server#Plain###sap.com caf/um/metadata/imp MAIN_APL70VAL_C 963656#
#1.5#000BCDEF4B75002F0000000100000B4400046A8340D0C614#1243011867513#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCRuntimeInterfaceImpl.newProperties(int prcs, int conn)#######SAPEngine_System_Thread[impl:5]_35##0#0#Error#1#/System/Server#Java###enter newProperties()##
#1.5#000BCDEF4B75002F0000000300000B4400046A8340D702A6#1243011867919#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCRuntimeInterfaceImpl.init()#######SAPEngine_System_Thread[impl:5]_35##0#0#Error#1#/System/Server#Java###SNC properties not found ##
#1.5#000BCDEF4B7500300000000000000B4400046A8340F313F1#1243011869762#com.sap.caf.um.relgroups.imp.persistence.DataSource##com.sap.caf.um.relgroups.imp.persistence.DataSource.DataSource()#######SAPEngine_System_Thread[impl:5]_4##0#0#Info#1#/System/Server#Plain###sap.com caf/um/relgroups/imp MAIN_APL70VAL_C 963842#
#1.5#000BCDEF4B7500380000000100000B4400046A83412AA249#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading trusted anchor configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
 at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
 at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
 at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#000BCDEF4B7500380000000300000B4400046A83412AAC7B#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading credential configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
 at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
 at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
 at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#000BCDEF4B7500380000000500000B4400046A83412AB51D#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading CRL configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
 at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
 at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
 at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#000BCDEF4B7500380000000700000B4400046A83412ABDBE#1243011873402#com.adobe.service.sap.configuration##com.adobe.service.sap.configuration#######OrderedChannel for service##0#0#Error#1#/System/Security#Plain###Error while reading password configuration information:
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID servicescomadobeDocumentServicesConfigurationAdobeConfigurationService~jar
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:231)
 at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:724)
 at com.adobe.service.sap.configuration.ConfigurationService.readXML(Unknown Source)
 at com.adobe.service.sap.configuration.ConfigurationService.<init>(Unknown Source)
 at com.adobe.service.sap.configuration.ServiceFrame.start(Unknown Source)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Jean Seguin

Hi,
The user SAPJSF is not lock and here is the output of the Stdserver.out
stdout/stderr redirect
node name : server0
pid : 5800
system name : IS1
system nr. : 01
started at : Fri May 22 14:50:38 2009
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 5756] Fri May 22 14:50:39 2009
[Thr 5756] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Loading: LogManager ... 6420 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 440 ms.
Loading: ThreadManager ... 76 ms.
Loading: IpVerificationManager ... 46 ms.
Loading: ClassLoaderManager ... 30 ms.
Loading: ClusterManager ... 638 ms.
Loading: LockingManager ... 227 ms.
Loading: ConfigurationManager ... 8136 ms.
Loading: LicensingManager ... 76 ms.
Loading: CacheManager ... 410 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (45 ms).
Service cross started. (243 ms).
Service file started. (289 ms).
Service runtimeinfo started. (30 ms).
Service timeout started. (106 ms).
Service trex.service started. (106 ms).
Service p4 started. (744 ms).
Service classpath_resolver started. (30 ms).
Service userstore started. (243 ms).
Service jmx_notification started. (532 ms).
Service log_configurator started. (24331 ms).
Service locking started. (15 ms).
Service http started. (759 ms).
Service naming started. (1775 ms).
Service appclient started. (228 ms).
Service failover started. (213 ms).
Service jmsconnector started. (304 ms).
Service javamail started. (410 ms).
Service ts started. (349 ms).
Service licensing started. (30 ms).
Service connector started. (380 ms).
Service iiop started. (652 ms).
Service webservices started. (1700 ms).
Service deploy started. (31390 ms).
Service configuration started. (61 ms).
Service MigrationService started. (106 ms).
Service bimmrdeployer started. (30 ms).
Service dbpool started. (6041 ms).
Service com.sap.security.core.ume.service started. (7680 ms).
Service tcdisdic~srv started. (1776 ms).
Service security started. (4068 ms).
Service classload started. (228 ms).
Service applocking started. (228 ms).
Service shell started. (379 ms).
Service ejb started. (547 ms).
Service tceCATTPingservice started. (425 ms).
Service telnet started. (501 ms).
Service dsr started. (1062 ms).
Service servlet_jsp started. (1791 ms).
Service webdynpro started. (1426 ms).
Service cafummetadata~imp started. (2095 ms).
Service keystore started. (2474 ms).
Service ssl started. (15 ms).
Service cafruntimeconnectivity~impl started. (50818 ms).
Service jmx started. (3111 ms).
Service tcsecsecurestorage~service started. (1199 ms).
Service tcsecwssec~service started. (835 ms).
Service cafumrelgroups~imp started. (4099 ms).
Service CUL started. (2550 ms).
Service tcsecdestinations~service started. (2824 ms).
Service apptracing started. (1351 ms).
Service com.adobe~DataManagerService started. (3187 ms).
Service pmi started. (1138 ms).
Service tcsecvsi~service started. (1988 ms).
Service sld started. (5525 ms).
Service basicadmin started. (4568 ms).
Service com.adobe~DocumentServicesDestProtoService started. (1548 ms).
Service com.adobe~DocumentServicesBinaries2 started. (1624 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (1336 ms).
Service adminadapter started. (364 ms).
Service com.adobe~LicenseService started. (470 ms).
Service monitor started. (1564 ms).
Service com.adobe~DocumentServicesConfiguration started. (2762 ms).
Service com.adobe~TrustManagerService started. (182 ms).
Service com.adobe~PDFManipulation started. (4888 ms).
Service tc.CBS.Service started. (10564 ms).
Service com.adobe~FontManagerService started. (10049 ms).
Service com.sap.aii.af.cpa.svc started. (9821 ms).
Service com.sap.aii.af.security.service started. (31 ms).
Service tc.monitoring.logviewer started. (19216 ms).
Service com.sap.aii.af.svc started. (2808 ms).
Service com.sap.aii.af.ms.svc started. (1366 ms).
Service com.adobe~XMLFormService started. (6315 ms).
Service com.sap.aii.adapter.bc.svc started. (106 ms).
Service com.sap.aii.adapter.marketplace.svc started. (243 ms).
Service com.sap.aii.adapter.xi.svc started. (182 ms).
Service com.sap.aii.adapter.file.svc started. (304 ms).
Service com.sap.aii.adapter.jdbc.svc started. (288 ms).
Service com.sap.aii.adapter.rfc.svc started. (122 ms).
Service jms_provider started. (22373 ms).
Service com.sap.aii.adapter.mail.svc started. (1442 ms).
Service com.sap.aii.adapter.jms.svc started. (895 ms).
Service com.sap.aii.af.ispeak.svc started. (728 ms).
Service rfcengine started. (73524 ms).
ServiceManager started for 148445 ms.
Framework started for 166083 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel October 23, 2006 07:41 GMT

Data bridge not working?

Hi there,
I am trying my first import into PCM via Data Bridge but cannot make it work.
i am using the coporate PCM10 VMWare.
Can you please tell me how I can find the root cause of this issue?
Here is the data before the import
I have created a very simple flat file
And a spec file
The log says that everything went fine but I cannot see any change via the grid after refreshing it....

Hi JB,
Your problem certainly comes from naming issues. In your grid I can see the line item “Production costs” (with a space). But in your input file it’s “ProductionCosts” without space. Look in your Line Item hierarchy, I bet you have a new item “ProductionCosts” at the root. Add to it the fact that you use space as a delimiter, you get your solution. Make sure your names are consistent and use a common delimiter like tab or semi column.
Regards
Jérémie

Communications data: Could not send SLD data - still not resolved

Hello,
SAPMMC shows this error in my PI system while startup.
RZ70, Visual Admin -> SLD Data Supplier are OK and SLD has my ABAP - Java systems registered.
What can be causing this when everything works fine?
Thanks
Gökhan

Yes,
It is critical to obtain a connection to the SLD as XI will access and maintain the central data from this SLD. Since you have mentioned that it is a fresh installation, check all the post-installation steps again. Check for the SLD connections in the RFC destination. Check if the SLD data supplier you have created for XI is working fine. Check the connections from SLD to SAP are fine.
Award if helpful.
Regards,
Sarath.
Please read the Forum's Rules of Engagement,
i.e.,
/thread/117188 [original link is broken]
and refrain from requesting points
SDN PI/XI Forum Moderator

SLD Server does not start

Hi,
I try to configure my local SLD. I created all the roles and groups mentioned in http://help.sap.com/saphelp_nw70/helpdata/EN/43/ce62c162cd0cd4e10000000a1553f7/content.htm. I put my Administrator User in all of the created groups. When entering the SLD I get told that the "SLD Server has stopped".
When I try to start the server it fails with some error messages. This is the first one:
#57 03/21/2008 18:00:32.360 [SAPEngine_Application_Thread[impl:3]_24] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors.
Thrown:
javax.jms.JMSSecurityException: You do not have permissions: action produce and instance SLDClusterNotificationTopic.
at com.sap.jms.protocol.notification.ServerExceptionResponse.getException(ServerExceptionResponse.java:231)
at com.sap.jms.client.session.Session.checkReceivedPacket(Session.java:2614)
at com.sap.jms.client.session.Session.createProducer(Session.java:2397)
at com.sap.jms.client.session.TopicSession.createPublisher(TopicSession.java:46)
at com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender.<init>(ClusterNotificationSender.java:97)
at com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender.<init>(ClusterNotificationSender.java:72)
at com.sap.lcr.cimsrv.ClusterNotificationSender.newInstance(ClusterNotificationSender.java:44)
at com.sap.lcr.cimsrv.RareClusterNotifications.send(RareClusterNotifications.java:28)
at com.sap.lcr.cimsrv.RareClusterNotifications.sendStartStopUpdate(RareClusterNotifications.java:56)
at com.sap.lcr.webui.CimIO.startCIMServer(CimIO.java:563)
at com.sap.lcr.webui.Admin.actionStartStop(Admin.java:855)
at com.sap.lcr.webui.Admin.doGet(Admin.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Maybe it is a problem with permissions. But I cannot find the action mentioned in the error message "action produce and instance SLDClusterNotificationTopic".
Any idea how I can solve this problem.
Thanks in advance.
Best,
Stephan

Hi,
Just a hint from the link you mentioned.
"If you want to set up SLD security for test purposes, you only have to map the LcrAdministrator role to the SAP_SLD_ADMINISTRATOR group and assign an administrator user to this group."
Did you add Administrator user to SAP_SLD_ADMINISTRATOR group mapped to LcrAdministrator role? If not, try it too.
Also check these blogs for configuring SLD.
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
Discovering SLD--PART 1
Discovering SLD-PART 2
Regards,
Harini S
Consider rewarding for helpful answers

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

This is the code which we have used.
//////////Return if it is first time for the day or not//////////////
+ (BOOL)isFirstTimeToday {
BOOL result = YES;
NSDate *now = [[NSDate alloc] init]; /// represents the current time
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
NSDate *today = [gregorian dateFromComponents:components];
[now release];
[gregorian release];
NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
if (savedDate) {
if ([today earlierDate:savedDate] == today) {
result = NO;
return result;
////////Stores the date/////////////
+ (void)userDidVisitReenforceScreenToday {
[[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
////////////What [NSDate todayAtMidnight] stores/////////////////////
+ (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
[gregorian release];
NSLog(@"dateAtMidnight : %@",dateAtMidnight);
return dateAtMidnight;
+ (NSDate *)todayAtMidnight {
return [self daysFromNowAtMidnight:0];
Please Suggest..

How to transfer SLD data from PI 7.1 to Solman 7.0

Hi
. I Have a Landscape with Solman 7.0 (Central SLD) and PI 7.0 (DEV, QLT,PRD)-- Local SLD's, now customer wants to update from PI 7.0 to PI 7.1.
PI Local SLD's are pointing to Central SLD of Solman through SLD data Bridge.
But if i upgrade PI from 7.0 to 7.1 (with SLD 7.1), where should be my Central SLD ??? as SAP recommands we are not supposed to set a Central sld which is of lower version as in my case Solman with SLD still on 7.0 (To forward data from Local SLd to Central SLD -- pre requists either SLD version should be same or Hiegher) but they are on SOLMAN 7.0
Karthik

Hi,
Ok i will be more precise on my question.
we have a landscape consisting ECC,SRM,CRM,PI and SOLMAN, (DEV,QTY,PRD) they are all on 7.0 version.
To my knowledge DEV,QTY,PRD systems Data Suppliers are pointing to Local SLDs respective PI (DEV,QTY,PRD) ie all DEV systems -> PI Local SLD and all QTY systems -> PI QTY and All PRD systems are Pointing to PI (PRD)
SLD Data is transferred from Local SLDs to central SLD in this way using Bridge Forwarding
PI DEV -> PI QTY, then from PI QTY to PI PRD and Finally From PI PRD to Cental SLD on SOL
PI DEV -> PI QTY->PI PRD -> SOL (CENTRAL) all are on 7.0.
Now Customer wants to upgrade PI 7.0 to PI 7.1. then if upgrade is done to PI (DEV,QTY,PRD)
The Bridge forwarding will remain the same like this
PI DEV(7.1) -> PI QTY(7.1)->PI PRD(7.1) till here its fine now how to forward to the Central SLD of SOLMAN as its is still on 7.0 version
I Have read from the SMP that Bridge Forwarding from 7.1(in my case PI) i to 7.0 (in my case SOL)is Not allowed
But Bridge forwarding from 7.0 to 7.1 is allowed,
PI DEV(7.1) -> PI QTY(7.1)->PI PRD(7.1) <- SOL , Now central SLD will be PI PRD.
if i do so SOL will not be Central SLD any more and then how SOL can generate EWA and other Solutions without SLD Data from Sat systems
Please provide me a solution for this.
Thanks
Karthik

Datas are not coming from top to bottom in collumn

Hiiiii
I am moving my data from itab to itab1.
And in itab1 datas are not started from top of the collumn for each a/c no.
A/CNO|AB|DZ|RV|SA
00001|00 |000|00 |10
00001|00 |000|00 |15
00001|00 |000|020|000
00002|00 |15 |000 |00
00002|21 |00 |000 |00
00002|00 |25 |000 |00
00002|00 |00 |000 |17
what should i do to start my data from top of the collumn.
Thanks in advance.
Edited by: sanket sagar on Mar 17, 2011 8:14 AM

Hi,
Let me add some more comments in your code.
LOOP AT IT_BKPF INTO WA_BKPF.
IF SY-SUBRC = 0. - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
ENDIF.
READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
BUKRS = WA_BKPF-BUKRS
GJAHR = WA_BKPF-GJAHR.
IF WA_BSEG-SHKZG = 'H'.
WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
ENDIF.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
ENDIF.
APPEND WA_FINAL TO IT_FINAL.
ENDLOOP.
I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
SORT IT_FINAL BY SAKNR BLART.
LOOP AT IT_FINAL.
IF WA_FINAL-BLART = 'AB'
MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
ENDIF.
AND SAME FOR ALL DOC TYPES.
ENDLOOP.
SORT IT_FINAL BY HKONT .
What is the structure of the internal table.
If my understanding is correct, you want to populate a table as below.
For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
HKONT1 - AB - 1000
HKONT1 - BC - 2000
HKONT3 - CD - 2000
Please correct it if your problem is something different.

Sql server not starting

Hi I have only files from catalog DATA form my SQL Server 2008. After I installed sql server and replates file in katalog DATA server not starting.
Where I have problem, what I need to do to work? thanks for any help
best regards

This Is my Error log
2014-01-02 12:28:05.84 Server Jul 9 2008 14:17:44
Copyright (c) 1988-2008 Express Edition (64-bit) 2014-01-02 12:28:05.84 Server 2014-01-02 12:28:05.84 Server 2014-01-02 12:28:05.84 Server 2014-01-02 12:28:05.84 Server 2014-01-02 12:28:05.84 Server 2014-01-02 12:28:05.84 Server 2014-01-02 12:28:05.84 Server 2014-01-02 12:28:05.84 Server -d F:\Microsoft SQL -e F:\Microsoft SQL -l F:\Microsoft SQL 2014-01-02 12:28:05.92 Server 2014-01-02 12:28:05.92 Server 2014-01-02 12:28:05.97 Server 2014-01-02 12:28:11.12 Server 2014-01-02 12:28:11.17 spid7s 2014-01-02 12:28:11.36 spid7s 2014-01-02 12:28:11.37 spid7s 2014-01-02 12:28:11.37 spid7s 2014-01-02 12:28:11.39 spid7s 2014-01-02 12:28:11.50 spid7s 2014-01-02 12:28:11.50 spid7s 2014-01-02 12:28:11.53 spid10s 2014-01-02 12:28:11.55 spid7s 2014-01-02 12:28:11.55 spid7s 2014-01-02 12:28:11.55 spid7s 2014-01-02 12:28:11.56 spid10s 2014-01-02 12:28:11.56 spid10s 2014-01-02 12:28:11.56 spid10s 2014-01-02 12:28:11.56 spid10s 2014-01-02 12:28:11.56 spid7s 2014-01-02 12:28:11.56 spid7s 2014-01-02 12:28:11.56 spid7s 2014-01-02 12:28:11.56 spid7s 2014-01-02 12:28:11.58 spid10s 2014-01-02 12:28:11.58 spid10s 2014-01-02 12:28:11.58 spid10s 2014-01-02 12:28:11.58 spid10s 2014-01-02 12:28:11.58 spid10s 2014-01-02 12:28:11.58 spid10s 2014-01-02 12:28:11.58 spid10s 2014-01-02 12:28:11.58 spid7s 2014-01-02 12:28:11.58 spid7s 2014-01-02 12:28:11.58 spid7s Any idea? Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (X64)
Microsoft Corporation
on Windows NT 6.2 <X64> (Build 9200: )
(c) 2005 Microsoft Corporation.
All rights reserved.
Server process ID is 6840.
System Manufacturer: 'Hewlett-Packard', System Model: 'HP ENVY Sleekbook 4 PC'.
Authentication mode is WINDOWS-ONLY.
Logging SQL Server messages in file 'F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
This instance of SQL Server last reported using a process ID of 6948 at 2014-01-02 12:22:16 (local) 2014-01-02 11:22:16 (UTC). This is an informational message only; no user action is required.
Registry startup parameters:
Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf
Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG
Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
Detected 4 CPUs. This is an informational message; no user action is required.
Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
Starting up database 'master'.
FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
SQL Trace ID 1 was started by login "sa".
Starting up database 'mssqlsystemresource'.
The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
Error: 15466, Severity: 16, State: 1.
An error occurred during decryption.
Starting up database 'model'.
Server name is 'MACIEK\SQLEXPRESS'. This is an informational message only. No user action is required.
Informational: No full-text supported languages found.
Starting up database 'msdb'.
Error: 17204, Severity: 16, State: 1.
FCB::Open failed: Could not open file E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\model.mdf for file number 1. OS error: 3(System nie może odnaleźć określonej ścieżki.).
Error: 5120, Severity: 16, State: 101.
Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\model.mdf". Operating system error 3: "3(System nie może odnaleźć określonej ścieżki.)".
Error: 17204, Severity: 16, State: 1.
FCB::Open failed: Could not open file E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBData.mdf for file number 1. OS error: 3(System nie może odnaleźć określonej ścieżki.).
Error: 5120, Severity: 16, State: 101.
Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBData.mdf". Operating system error 3: "3(System nie może odnaleźć określonej ścieżki.)".
Error: 17207, Severity: 16, State: 1.
FileMgr::StartLogFiles: Operating system error 2(Nie można odnaleźć określonego pliku.) occurred while creating or opening file 'E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\modellog.ldf'. Diagnose and correct the operating system error, and retry the operation.
File activation failure. The physical file name "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\modellog.ldf" may be incorrect.
Error: 945, Severity: 14, State: 2.
Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Error: 17207, Severity: 16, State: 1.
FileMgr::StartLogFiles: Operating system error 2(Nie można odnaleźć określonego pliku.) occurred while creating or opening file 'E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBLog.ldf'. Diagnose and correct the operating system error, and retry the operation.
File activation failure. The physical file name "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBLog.ldf" may be incorrect.

SLD Data Supplier Bridge

I am not able to start SLD Data Supplier Bridge.
Any help appreciated.

Have you restarted your j2ee engine using transaction smicm at all in the ABAP stack ?
Administration - j2ee - restart - yes
Please wait about 10 minutes for the java components to come back to live.
Message was edited by: James Ibbotson

Synchronization from SLD to LMDB is working fine, but data is not written to Software == Product Instance

Dear Gurus,
Synchronization from SLD to LMDB is working fine, but data is not written to Software ==> Product Instance section tab. What could be the problem ? Normally it should gather automatically, but pushed me to select manually lots of component ???
Here is collecting is working fine !!!

Hello Kemal,
You have to ensure that your Technical System info is properly filled automatically.
In LMDB you first create its Product System on LMDB Start Screen ProductSystem tab, after that please assign its respective Technical System. You probably need to run the Verification Check in order to confirm that your Product System has all Product Instances according on Technical System's Software Component Versions.
Regards.
Luis Roel

Error when starting Dreamweaver CS6 w/Web Assist Data Bridge installed

When I start Dreamweaver CS6 I get messages that it can't find the following files in the Configuration/floaters directory.
The Files are:
WA_Memento.htm
WA_Site Tools.htm
WA_Site Tools_Progress.htm
Then it says "The Floater will not be shown."
How do I fix this?

Resetting your workspace in Dreamweaver should resolve this. Click Window > Workspace Layout and reset.
If you owned older extensions, then installed Data Bridge, Dreamweaver is probably just trying to find the floaters the old extensions used. Should be a quick fix if you reset!

SLD Data Bridge not starting

Similar Messages

Maybe you are looking for