SLD - One vs Two vs Three

We just installed our SAP XI for QA and selected to use SLD on the DEV box.
We are planning to have PROD its own SLD.
Is there any disadvantage in sharing SLD between DEV and QA?
I am reading the past weblogs. Please share any latest experiences.
Regards
Mike

Hi Michael,
In many implementations,SLD will be shared for DEV and QA environment and separate SLD for Productions.
But SAP suggests to go for single SLD. Just refer this note- 720717
Some discussions on the same-
Recommendation on SLD for XI
SLD best practices
How to handle SLD in XI ( https://websmp201.sap-ag.de/nw-howtoguides) from service.sap.com
Hope this helps,
regards,
Moorthy

Similar Messages

  • Can you use more than one email address on one account as to enable two or three devices to use imsg????

    Can you use more than one email address on one account as to enable two or three devices to use imsg as when i add new email address's in settings it just says veriyfying and nothing happens????

    If I read your question right, yes.
    My pad has two e mail addresses, and my phone has a phone number as well as a e mail address.  For each device you can add additional 'receive at' addresses in settings.
    Note, when you add a new address, apple will send an e mail to that new address that you need to respond to, to show that it is a valid address.  So look in the inbox of that e mail account for the verification e mail.  Note further, some spam filters think that the verification e mail might be spam, so if it does not show up in your in box, look in any spam file you might have.
    in my case, the verification e mail came within a few minutes of declaring the new address.
    The multiple address are useful if you have more than one device under your apple id, and want to be able to send stuff to that particular device.

  • My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix?

    My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix? Ive tried reseting my computer and that didnt work

    Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
    https://www.youtube.com/watch?v=gLbasVD69xo

  • Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

    Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

    MAC OS 10.7.4  3.2GHz Quad-Core Intel Xeon processors, 12GB  of 800MHz DDR2 and 2 ATI Radeon HD 2600 XT 256MB (two dual-link DVI ports) . The problem is, I woul like to use one output as main and the three others as secondary or extended desktop but the system don't allow me use two diferent video cards this way.

  • A friend set me up with icloud and in the process he lost some of the book i was listening to. I can't find it in my ipod or on my computer. It is part one and two of a book; interest part three showed up hough.

    A friend set me up with icloud on my ipod touch and in the process lost part one and two of the book I had purchased from itunes. I searched for it and it is not in my ipod any longer, although part 3 is there.  I tried to download it again from itunes store but they said I already purchased it and I didn't want to be charged again. What can I do? I am not happy at all because all I did with my Ipod was listen to my book and now I can't.

    Hi.
    If you've bought it from iTunes, you should be able to re-download it for free.
    Download directly from iPod by going to the iTunes Store-App and find the "Purchased"-menu. From here you should get a complete list of all your bought items and the ability to re-download.
    Download from iTunes on PC/Mac by opening iTunes > Go to iTunes Store > Go to the menubar on the left and choose "Purchased". Now, from the appearing window select the proper categori on top of the screen.
    I hope this was helpful.

  • After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably.  I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day

    After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably.  I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day.  We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update.  I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well.  Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed".  Whatever. 
    I want you all to know how disappointed I am in your company for the handling of this issue.  I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.   
    I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues.  I do not believe this was an issue due to the age of a battery and that was pretty lame to say so.  It was fine and now its not.
    Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
    Thank you.
    Web Address (URL):
    5106 McNarney

    Sorry this is a user to user technical forum.  There is NO APPLE here as stated in the term of use when you signed up for this forum.
    here are some battery tips
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    http://www.apple.com/batteries/iphone.html

  • Why do I have to pay for a charge that I should not of been charged then wait for the credit in two to three billing cycles? If I don't pay it I get charged $5 a month late charge?

    So I spent a considerable amount of time on the phone with Verizon about charges on my wireless bill. The conclusion of it was: Pay the charge and we will credit the charge or it will show as a balance due with a $5.00 late fee every month. I got two phones on a promotion in November. Part of the promotion was no activation fee. Got my first bill and a $70.00 activation fee was on it. On line chatted with Verizon and they said it would be credited in two to three billing cycles. I paid my bill minus the activation fee. This month I have a $5.00 late fee and a $35.00 restocking fee because they messed up and sent three phones and I returned one. It was not activated. They might credit me that money back. What is going on?????

        I am so very sorry for any aggravation you've experienced getting your billing straightened out, Nunu1957. It's true that it can take 1 to 2 billing cycles for some account balance adjustments to appear on a statement. While I know you'd rather not have paid your activation fees, the terms of your agreement do require you to do so in order to avoid late fees or even involuntary service interruptions.
    I am concerns about the restock fee. If the device was sent to you in error, you should not have been billed a restock fee. You stated that there may be a refund for the fee. Has that been confirmed?
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Issue Printing One or Two Checks on HP LaserJet Pro 200 MFP M276nw

    I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
    I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
    With my old printer, I used the manual feed for a partial sheet.
    Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
    It seems one of two things happen:
    1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
    It then re-prints the partial page on the next sheet of paper.
    2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
    In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
    Any suggestions on how to avoid these issues would be appreciated.

    Me too.
    I've been using an alternate printer for printing the checks, but I'd rather get rid of the old one. (The HP Laser Pro 200 takes up a lot of space!)
    KC, Seems like you've been waiting for an answer for a VERY long time.  I'm not going to hold my breath.
    Hey HP!  Do you ever monitor this site?!
    KC-Texas wrote:
    I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
    I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
    With my old printer, I used the manual feed for a partial sheet.
    Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
    It seems one of two things happen:
    1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
    It then re-prints the partial page on the next sheet of paper.
    2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
    In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
    Any suggestions on how to avoid these issues would be appreciated.

  • I have totally "uninstalled" what I had and then reinstalled the newest  version of itunes.  Still......  First, when I click on the itunes icon to load it takes the program anywhere  from two to three minutes to load.  None of my other programs take this

    I have totally "uninstalled" what I had and then reinstalled the newest
    version of itunes.  Still......
    First, when I click on the itunes icon to load it takes the program anywhere
    from two to three minutes to load.  None of my other programs take this
    long.
    When in the itunes program I can be moving around in my library and itunes
    when choosing a song or songs, choosing file, edit, etc,. whatever command I
    choose it just suddenly stops.  I can issue five commands and watch each one
    respond in 30 second to two minute intervals.  I can issue several commands,
    even shutting down, and it will do all but takes several minutes to do so.
    My itunes program was working fine when this problem suddenly arose.
    Terry

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99436)

  • I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

    I have 160gb of music on my Classic, 6th Gen (I think) I've just bought it. Is it possible for it to play my songs in a random order, one or two from different albums?

    To add to what Stonerock has mentioned, you can either create Playlists in your iTunes Library, containing exactly what you want, and then Sync them to your iPod, or you can use the iPod Classic's On-The-Go feature.
    Reading between the lines, I'm going to assume for now that you want to be able to create your preferred listening list while "out and about" - so not near your iTunes library. (You have posted in iPod Classic, after all.) You can do this with the On-The-Go Playlist.
    Look in the Playlists menu on the iPod. It probably contains the Recently Added, Recently Played and other pre-made Playlists that you see in your iTunes Library. At the bottom of the Playlists list, is the On-The-Go showing 0 Songs. Scroll down to it and press the Select (centre) button. The screen will give you instruction on adding songs to the On-The-Go Playlist.
    Basically, if you press-and-hold the Select (centre) button, while highlighting a song, the song title will blink as it is added to the On-The-Go Playlist. Try it, then go back to Playlists/On-The-Go and notice that it will now say 1 Song. (Note, you cannot add a "now playing" song to the On-The-Go Playlist.) Repeat this for every song you want to have in the list. You can also look in the Albums menu, highlight the album title and press-and-hold that to add the complete album to your On-The-Go Playlists with one press. So if you add the two albums to your On-The-Go Playlist, you can then listen to just those two albums.
    To shuffle the songs, turn on Shuffle on your iPod. Either, go into Settings/Shuffle and press the Select button to toggle between Off/Songs/Albums, or on the Now Playing screen, press the Select button three times to reach the Shuffle option, where you use the scroll wheel to move between Off/Songs/Albums, press the Select button to activate it.
    Having added songs to the On-The-Go Playlist, go into it and notice the list of songs and options to Save Playlist (New Playlist 1) or Clear Playlist. If you use Sync to manage your iPod (and that really is the best way by the way), the next Sync will transfer any unsaved On-The-Go and any New Playlist Xs that you have, back to your iTunes Library. You can even remove any song from the current On-The-Go Playlist by highlighting it (in the On-The-Go, obviously) and press-and-holding the Select button.
    If you need assistance in creating a Playlist in your iTunes Library, please ask.

  • E-mail typed lines appear full when sent but upon reply they are broken into one or two words per line.

    Why do my e-mail messages to people appear to have full lines when I send them but when they reply, the "full lines" are broken up with one word on a
    single line?

    Dear Friends,
    E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer
    business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
    Yours Truly,
    Broduff.

  • Trackpad two- and three-finger functions not working

    Everything was fine last night, but when I turned on the computer this morning, the trackpad is not working correctly. Cursor movement with one finger feels different than normal (a bit sluggish) and two- and three-finger functions such as scrolling, enlarging, and navigating forward and back do not work. I have tried letting the computer sleep first, rebooting, shutting down and turning back on, and the trackpad firmware update from last November (which it said I did not need to update) and nothing has worked. The trackpad menu in the System Preferences offered nothing as well. I have not updated to Snow Leopard.
    Thanks in advance for your help.

    Hi
    I had the same problem specially after carrying out the last update 4.3 the battery was draining very fast y. In addition to that the phone freezing initially for few minutes then for almost a day and finally continuously.
    I did almost every thing but replacing the handset and non worked.
    As a final attempt to fix the problem before I replace the unit and get a new one was to
    1. connect the phone to the my computer (Mac)
    2. Launch iTunes
    3. Restore the phone to factory setting (with the 4.3) upgrade.
    Of course I lost every thing my contacts all of my apps and phone settings. But it worked it has been two days now the phone didn't freeze and the battery life is even better than before.
    Note:
    1. All of my contacts, note, calendar, emails were backed up using my company exchanger
    2. Before restoring I listed all of the apps that were installed and I reinstalled them one by one all over again.
    Try this solution and I hope it works with you.
    Regards
    Ana Al Khanajri
    iPhone 4   iOS 4    

  • Which iPad model do I have?  No models listed on back. Purchased new two or three years ago. Settings, general, about says model is MD529LL/A. Is it just a plain iPad mini?

    Which iPad mini do I have?  Purchased two or three years ago new, and Model listed in settings, general, about is MD529LL/A and capacity 27.4 GB so that would be a 32 GB?  No model listed on back. I assume it is simply a mini but I would like to know the specs.

    Thanks for your reply Niel.  I had concluded the same thing prior to seeing your post.  The way I solved it was to look on the back of the iPad mini BOX which I had saved!  The thing that threw me was that the model listed on the device under settings, general, about was MD529LL/A but on the box it says my model is A1432 and my PART No. is MD529LL/A.  I checked out your link and it was one character off from my actual PART No.
    Thanks for your trouble.

  • Do you think this Forum should be divided in two or three&

    The HCM Payroll Germany, Austria & Switzerland (DACH) has been created more than a month ago and not a single thread had been posted in it until this morning.
    Considering that the forum/category "ERP HCM (HR)" often sees more than 60 threads with postings per day,
    I believe SAP's SCN should consider to create at least one or two new forum/category to help sub-divide the ERP HCM (HR).
    Possibly ERP HCM - Payroll and ERP HCM - Time Management (and rename the other one ERP HCM - HR) ?
    I had initially posted this question into the HCM Payroll Germany, Austria & Switzerland (DACH), my thread was moved to the "Suggestions and Comments" forum by a moderator, and now someone tells me to post it in the "Idea Place".
    So I will asy you, the users of this Forum, whether you would like this forum to be divided into two or three (and what should be their "titles") ?

    Remi
    i only moved the thread to suggestion and comments forum , as that is right forum for the discussion
    and comeing to your query yes i also wants the forum to be divided based on the Modules in HCM
    But if we do that what in case of other modules say ABAP we ABAP HR also right
    and i welcome your suggestion from HCM point of view

  • Add: Part One, Part Two.......and so on

    I have a large document I want to add Part One, Part Two........... and so on to the beginning of each chapter title automatically, with a script, is this possible, and can someone (as I'm not so great a scripting) show me an example?
    Many thanks

    Hmmmm (thinking). It might boil down to this: search for your chapter titles (by style? I'll be assuming that!), insert 'part xx' before. Searching is no problem; inserting stuff is, because it messes up the 'found item' array. Let's start at the end, shall we. This code is not tested!
    var numerals = [ "One", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine", "Ten", "Eleven", "Twelve", "Thirteen" ]; (etc.)
    app.findTextPreferences = NothingEnum.nothing;
    app.findTextPreferences.appliedParagraphStyle = "ChapterTitle"; // [!! YOUR STYLE NAME HERE !!]
    allFoundItems = app.activeDocument.findText(true);
    // This returns the items in REVERSE ORDER :-)
    if (allFoundItems.length > numerals.length)
      alert ("We're gonna need a bigger boat");
      exit(0);
    for (occurrence=0; occurrence<allFoundItems.length; occurrence++)
      allFoundItems[occurrence].insertionPoints[-1].contents = "Part "+numerals[allFoundItems.length-occurrence-1]+"\r";
    The 'allFoundItems' array is in reverse order (as requested by findText), so the numbers should be inserted last-to-first. Let me know how that worked out

Maybe you are looking for