SLD- Same business System

Hi,
I have an APO system which has developement and production only.
We had developed an interface via PI where PI environments are in Dev/QA/Regression and Production.
Our SLD is shared between DEV/QA/Regression and separeate SLD in Production.
I am getting transport error between Dev and QA since it was not able to find a obligatory transport target.
I managed to download the same business system used in Dev for QA, but still the transport is giving error.
The business system is of ABAP type. Let me know how to deal with this.
Regards
Sam

Hello Sam,
in theory you're right, but this is not possible in SLD. Every Business System can only be assigned to exactly one environment (if I recall correctly it is a dropdown menu), so you cannot map it on itself. For each transport to a different environment you'll have to assign a different BS. So either you work with dummies or you leave out one transport, I don't think you have many other options.
One other option I have seen is two clients on the ABAP DEV system where one of them would serve as test/dev client and the other one as QAS client.
A different option would be to work with Business/Communication Components and avoid this transport rules. But since you use an ABAP system this is not the recommended procedure.
Regards,
Jörg

Similar Messages

Import ID Configuration Scenarios and keep the same Business System names

Hi Guys,
Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
Thank you,
Best Regards,
Evaggelos Gkatzios

Hi,
We have done same but with bit of manual work (without Transport).
Create SLD object in target system with same name as in Souce XI system SLD.
IR & ID was exported using TPZ files from Source system & were imported in Target system.
It used same object names in both XI systems.
Regards
Sushil

Same business system in 2 differen scenarios

Hi Friends.
As it is not possible to create 2 businness systems in SLD to the same client , Is there any way to use the same business system , in 2 or more different scenarios in ID and how.
1000 thanks in advance.

Thanks for your replay.
The issue is in my scenario , I am using the business system related to client 100 , it is called
BSED0_100.
But now I want to use the business system of client 120 (BSED0_120) in the same scenario , to send an RFC request.
BSED0_120 it is already being used by another scenario , that why I can not se it in the list when I try to assign business system.
The question is how can I use BSED0_120 in my scenario despite it is being used by another scenario.
I tried to create another BS for client 120, in SLD but it said that theres is already a business system related to client 120.
I hope this explain the problem and many thanks.

Same Business system to two XI/PI landscapes and possibly two ESR's

Hello,
We are setting up a new PI 7 landscape in parallel to our current XI 3 landscape.
We do not foresee a migration of XI to PI in the short run so the two systems, XI and PI will run next to each other.
The problem we then have is with the ESR and proxies. The same business system must be able to connect to both XI and PI and must also be able to generate proxies with interface content from XI as well as with interface content from PI.
The connection from business system to ESR repository seems to be 1:1, only one ESR per business system (defined via SXMB_ADM)
Is there a way to allow ESR content from two XI/PI systems in one business system simultaneously?
How do we solve this issue?
Thanks
Tom

Hi Tom,
as you already said its 1:1 connection between ESR and business system. The connection is taken from the exchangeProfile, refer to [ABAP Proxy Generation on SAP help|http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm].
I suggest you to create the interfaces in XI, generate the proxies and transport to PI.
How are you going to use the to integration servers for ABAP proxy scenarios? I am asking because you only can use one integration server at a time for outbound ABAP proxies in SAP standard. You define the URL or RFC destination to the corresponding integration server in SXMB_ADMIN.
Regards, Martin

Dynamic Interface Determination Using the same Business System

Folks...
Does anyone have any good ideas on how to build a scenario where the same business system is used, but the interface mapping needs to be dynamic? I have a single JMS sender and 40 different message types on one side, and 40 ABAP Proxies on the other. The two solutions I see are as follows:
1. Create 40 separate JMS Senders with 40 different sender agreements
2. Create 40 Business Services for the same ECC system and utilize XPath expressions to support conditionally selecting an interface mapping
Neither of these in my mind is a great solution, does anyone have any others?
Mahalo,
Jonathan

Hi, I came cross the same problem on my current project, now I have following solution:
Create a number of JMS sender adapters, they all connect to same queue, but each JMS sender adapter only pick up particular type of message based on one JMS message property value. The message provider will be responsible to set the property value when they send message into the queue.
In JMS sender adapter, Parameter Tab -> Advanced Tab ->check Set Adapter-Specific message Attributes ->check Specify Additional JMS Message Properties (Maxmum of 10) -> Add Property name, e.g. "MsgType"
->Processing Tab -> Input Value in "JMS Message Selector", e.g. MsgType='WorkOrder'
after above setup, this adapter will only pick up messages that with "MsgType" Property value "WorkOrder"
For each type of adapter, you will create a JMS sender adapter and repeat the steps above, just put on the different Property value.
This approach will have number of Integration Scenarios, hence will have number of Sender Agreement.
I have tested the approach and it works.
Liang

SLD - Export Business System: 404 Not found while downloading ZIP-File

Hi, well we did a complete export of SLD to another XI-System. This worked fine so far except that one business System was not properly "installed" in SLD.
Therefore we want to export this single business system via option "Export" but we receive an 404 Error: The requested resource does not exist. when trying to download the given zip-file!
I read in OSS that this error occurs in XI-systems with SP <12 and SAP suggest to upgrade to 12
Well that's not an appropriate solution!
Does somebody can help how we can download this zip-file with the business system in it?!
Or is there some workaround i am not familiar with?!
Thx in advance!

Ok Prateek,
we had two same Technical Systems with two differnet hosts given in the SLD of DEV & PROD System.
After decision to devide both systems, means to seperate SLDs we copied the whole SLD from DEV to PROD. So there were some conflict with this two technical systems because during import of CIM-Data the business systems got switched up.
Therefore we thought we have to export the business system given in DEV SLD to import this business system in PROD SLD. But the workaround is that we simply assign the wrong imported business system to the right technical system (in PROD SLD)
That's it! br

Do I need to enter Pipeline URL in SLD for Business System in PI ?

Hi PI experts ,
I am having problems with my file adapter sender adapter .There is error :
2008-09-30 18:40:17 Success The message status set to DLNG.
2008-09-30 18:40:17 Error Transmitting the message to endpoint http://xxxxxx2230.wdf.sap.corp:51080/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.UnknownHostException: xxxxxx2230.wdf.sap.corp.
2008-09-30 18:40:17 Success The message status set to WAIT.
More info : I don't have anything enter for Pipeline URL under Integration right now
Do I need to enter Pipeline URL under Integration under Business System in SLD?
I don't have anything right now? Shouldn't this entry be automatic?Why I need to enter manually if I need to at all?
Please help!
Thanks
Bob

Do I need to enter Pipeline URL under Integration under Business System in SLD?
--> yes, we shd provide this in SLD.
I don't have anything right now?
--> http://<ur server>/sap/xi/engine?type=entry
give your server at <ur server>
Shouldn't this entry be automatic?
-->it shd be entered in SLD once.
Why I need to enter manually if I need to at all?
--> if you configure it in SLD once then there is no need for you to do it again.
By giving this URL yoou are connecting your adapter engine to Integration engine. once your adapter picks the message, it will check the BS and based on the configuration of BS it will push the message.
some times we can configure our adapter engine as a stand alone system with out IE or with different IE's, that is the reason SAP allows us to configure it.

More integration scenarios with the same business system in Int. Direct.?

Hi guys!
I need to integrate 5 business systems. I tried to create more integration scenarios (to do it clearly), but it is not possible to add already added business system to any other scenario...
What's the logic of this?
Can someone explain me it? Or some link?
Thanx Peter

hi Peter,
have you tried:
service without party ->
right click on your business system ->
add to scenario?
like this you can add your business system
to as many scenarios as you wish
Regards,
michal

Problem with business systems in SLD

Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
Ahmad

Hey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad

Can there be more than one transport targets for a business system in sld

Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
Padmaja

Hello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark

Missing business systems in model configurator

Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, Trevor

Dear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K

Integrated Business Systems

Hi All,
What is the significance of the 'Integrated Business Systems' option in the SLD under Business System. I hav a scenario File -> XI -> IDOC. i have 3 independant scenarios of the same kind.
Scenario1:
BuisnessSystem1(DELVRY03) -> XI -> Dev
BusinessSystem2(WMMBIDO2) -> XI -> Dev
BusinessSystem3(WMMBXY) -> XI -> Dev
In my Dev, only one partner profile has been created.It looks like
XILogicalSys(Logical System of XI)
Inbound parameters:
DELVRY03
WMMBIDO2
WMMBXY
When i checked my XIBusinessSystem (XILogicalSys is the logical system name for the same) in SLD, under the Integrated Business Systems, my BusinessSystem1,BusinessSystem2,BusinessSystem3 are listed. but for all my BusinessSystem1,BusinessSystem2,BusinessSystem3 no logical system name was given. when i pushed the IDoc from XI, I'm getting the most common error <b>Unable to convert sender service to an ALE logical system</b>.
I have seen in some posts that logica system names for BusinessSystem1,BusinessSystem2,BusinessSystem3 have to be created and for the same logica system names the partner profiles have to be created in Dev. But is it the right way to create a partner profile for each individual business system? then, why is the option Integrated Business Systems under the XIBusinessSystem in the SLD is listing all the Business Systems BusinessSystem1,BusinessSystem2,BusinessSystem3?
Can anyone help me in this regard?
Any help wud b gr8ly appreciated.
Thnx in Advance
Anil

Hi Anil,
There are couple of Technical solutions for your problem.
Option 1.
Give LS name (as given for partner profile in SAPR/3) for any one of the business system.
Use this Business system in Reciever agrement as sender service in rest of 2 scenarios.
Option2: Create one business service and attach desired logical system name and use in all 3 scenario.
You cannot have same logical systemname for more than one business system and import to same XI Box.
Option 3: Create a common Business system(other than mentioned Business system) and attach LS name to it and use this common Business system in reciever agreement of all scenarios want to post IDOCo said partner profile.
I feel 'Integrated Business Systems' is the list of business system using common Related Integration Server.
Hope it helps.
Regards,
Satish Chauhan

Assign Business System in Integration Directory

Hi all,
i have basic question.
in my ID, there are some configuration scenarios.
for example, the left side look like,
in case,one of Business System created on SLD was assigned to one of configuration scenarios,
i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
can i assign BS1 to several configuration scenarios?
or should i create Main scenario in order to define communication channel?
thanks in advance
venjamin

Hi venjamin
Yes, you can assign the same business system to different configuration scenarios.
to do this there are 2 ways.
1. Open the cofiguration scenario to which the business system has already been assigned.
Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
assign your business system.
2. Select the objects tab>service without party> business system> your business system> right click-->
assign to scenario and then select your scenario.
Hope this helps,
Regards,
bhavesh
Message was edited by: Bhavesh Kantilal

I am unable to see business systems in ID

Hi Experts,
I have created Technical and business systems in SLD,
I have done mapping every thing working fine but when go to integration directory
i am unable assign business systems, i didn't find my busuiness systems in ID.
Can u please tell me where i have done wrong.
Thanks in addvance.
Manisha.

Hi Manisha,
There is a simple solution for this problem,
1. If you use the same business system to map more than one scenario U can't see the Business system in the ID directly.i.e., at assign business systems in ID.
2. Go to next tab which is Objects (ID) there you can see all the business systems which are using by XI server please do like this to get the business system.
3 select the business system which u want to work on- right click and select add to acenario(current ID scenario)
4. come out of that tab then u can see the business system added to the scenario. then rest is normal.
hope you understand
regards
praveen

ABAP proxy client call PI with new client 120 in old business system

Hi all
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
Will it work or we need to do some extra configuration for communication channel.
Also please let me know how to configure Integration Directory for sender agreement, Receiver Agreement and the communication channel.
Thanks in Advance.

Hi Naina ,
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
> hope the technical entry of CRM is already in SLD . So you just need to make a business system entry . point the business sytem to the technical system entry with the right client here 120 .
Will it work or we need to do some extra configuration for communication channel.
> since sender is client proxy you don't need to do anything in case of receiver proxy you will be needing reciver communication channel of XI adapter type .
for proxy based communication your application system(other than PI/XI) should be able to make a proxy call to XI or receive a call from XI .for this purpose you need to make some settings at R/3( or CRM level)
For this check blog : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Abap proxies ( Client and Server proxies)
Other steps i.e Interface determination/receiver determination are as usual .
Regards ,

SLD- Same business System

Similar Messages

Maybe you are looking for