Sleep Mode when Charging

Last night I docked my iphone to charge while I slept. I thought eventually it would go in to sleep mode. I kept waiting for the screen to go black it never did. The screen only went dim. This is problem number 4 for me. Anyone else with same problem?

i found a solution for this issue: simply restarting the device (turning it fully off, then back on again).
users are discovering that doing so fixes various minor issues that creep up, over time (like frequent safari crashes, etc.). so perhaps, like some computers, an occasional "restart" does a world of good.
instructions:
• turn the device off by holding down the sleep/wake button on top for about 5 seconds, until you see the red slide button, then slide across the red button to confirm.
• i let mine sit for a minute (although that may not be necessary).
• then turn it back on by holding down the sleep/wake button for a few seconds, until you see the white apple logo. from that point, the startup process took about 30-40 seconds. (your mileage may vary.)
now my iphone properly goes to sleep while charging. (and now this question can truly be marked "answered.")
MacBook Pro, MacBook, Quad G5   Mac OS X (10.4.10)  

Similar Messages

  • PowerBook enters sleep mode with charger on and with new battery in Full

    Hi all,
    My powerbook enters in Sleep mode when it has a lot of energy. I have the powerbook with the charge on and battery in full charge and it still goes to sleep mode. It happens even when I'am working a lot with the computer. It appears that when a left my computer go to sleep over night the next day e goes a lot to sleep even when I'am working with the computer. I have tried to use just the charger, and just de battery but the error continues. I havemy power setting and it is e best performance (and it never goes to sleep in this mode).
    I can only avoid this if I never put the computer to sleep, because I i put it i will start putting it self to sleep.
    I have bought a new battery (7 months) and a new charger (2 month) recently, could be this the case?
    What is happening to my computer?
    It is my computer to ald and tired and needs to sleep a lot :/ ?
    Thanks for any help!

    The date only goes to 1970-01-01 if e click in power on without the battery and the AC adapter.
    If I remove the battery and unplug the AC adapter e wait many minutes and put back on the battery and the AC adapter a switch the power back on the date staid the same.
    I have notice one other think, some times the new battery that a bought in apple store does not charge (a have to remove the AC adapter a plug back in for it to charge), the AC adapter is correctly plug-in but it does not charge. I am begging to suspect that it is something wrong the the hardware (or the battery or the charger) sell by apple store.
    Is the any place for replace bad hardware still in warranty in apple store?
    What is the place to contact apple suport for this matters?
    Thanks!

  • MBP no sleeping mode while charging!

    hi all,
    my MBP doesn't go into the sleeping mode when I close it while it is charging! How can I change this?

    We have probably deployed about 200 of the 15" MacBook Pro systems so far, and have only seen the issue on a handful of them. Fortunately the issue was discovered when the systems were imaged and had not yet been deployed. If you are having the issue, I would recommend that you report it to Apple.
    Some people online were reporting that installing the NVIDIA Graphics Update 2009 (http://support.apple.com/downloads/NVIDIAGraphics_Update2009) would fix this problem. The update however was only available online briefly and then was pulled without explanation.
    I really don't see how this would help though as we are not seeing the issue with all systems we are receiving. I figured there must have been a bad batch of 9400's that made it to production. It is really concerning if people are seeing the same thing on the new 17" models as well.

  • (early 2014) rMBP abruptly goes black (sleep mode) when computer is tilted at certain angles or lifted.

    My (early 2014) rMBP abruptly goes black (sleep mode) when computer is tilted at certain angles or lifted. Ive reset Energy saver mode to factory defaults and the problem still occurs.

    Please make a Genius Appointment and take it in for service.

  • My macbook pro 2.0 early 2011 will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?

    Alo, my Macbook pro i7 2 GHz Intel Core i7 (early 2011) will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?

    There is no output from that command line?   Maybe the pid changed.
    I'll repeat what I am trying to find out...
    1. You do a pmset -g on the terminal.
    2. The output from that pmset should have a line that says "sleep 0 (imposed by n)" where n is some number.
    3. The ps ax | grep n is supposed to display what the process associated with n is.
    It's the output from step 3 that should indicate what is causing you not to sleep.
    But speaking of sleep, that's where I am going.

  • Mac mini didn't go into sleep mode when i am conect my thunderbolt display whit an optical thunderbolt cable

    hello my mac mini didn't go into sleep mode when i am using an optical thunderbolt cable to my thunderbolt display
    has any body els this problem

    Hello josfromkerkade.  Please contact me so that I can get more details. 
    We'd like to understand which monitor you're using, how old it is, which Thunderbolt port you're using (tethered cable or TB port), & the version of firmware. 
    [email protected]
    Thanks, Mitch

  • HT201401 My phone won't lock or go into sleep mode when answering calls

    My phone won't lock or go into sleep mode when making or receiving calls. Consequently I keep activating the mute or loud speaker buttons with my cheek. Can anyone help please??

    That is a Proximity Sensor Problem, which is located above the earpiece speaker. Do you have a new screen protector or iPhone Case which could interfer with this?
    Reset iPhone, Restore iPhone.
    If you have Warranty or AppleCare Coverage make Genius Reservation and take iPhone to Apple for resolution.

  • I am running OSX Lion 10.7.4 and the computer no longer will go into sleep mode when I close the cover What happened with this option?

    I am running OSX Lion 10.78.4 and the computer will no longer go into sleep mode when I close the cover. In system preferences I can no longer find the option that allows for this energy saving feature. What happened to this option and why is this no longer happening with the latest version of Lion?

    No external monitors or devices attached. When you mention that this function only works when devices are attached that is true when you set up your preferences that way. Up until my upgrade to Lion the computer would always go into sleep mode when I closed the lid. There also used to be an option to check in system preferences that allowed you to choose this option. My question for the discussion is what happened to that option and how do you get the computer to sleep or at least the display to sleep when you close the lid as we have been able to do in the past. Thanks.

  • I have a MAC OSX 10.6.8 Is it better to keep it in sleep mode when not in use or shutting down?

    Mac OSX 10.6.8  Should I keep it in sleep mode when not in use to shut down?

    My experience with electronic tends to revolve around thermo stress, and removing all power vs going to sleep tends to be more or less the same.  Many components have power totally taken away, and others use so little power they cool off.
    However, I found thermo stress occurs a lot more with discrete electronic components  (like back in the '80s and our VAX-11/780's which had lot more discrete components) and less with integrated circuits.  NOTE: I'm not talking about overheating components, just normal heating/cooling cycles.
    All in all I would not worry about it.  The OP (Grace 1) should use whatever method is most convent for her.  And I would say if she is using a Macbook Air or the new Macbook Pro Retna display (or any other Mac with a solid state drive (SSD)), then booting from shutdown may not take all that long anyway.

  • Bedside mode when charging

    Is there a way to stop the Z10 going into bedside mode when it is on charge, or otherwise to suppress the no notifications in bedside mode.
    I don't charge my phone at night but during the day when I am working, but that means that currently when I'm charging the phone my notification are blocked (not even the red LED flashing)
    Solved!
    Go to Solution.

    The Z10 won't automatically go into bedside mode when charging. It is done manually either from the clock app or with the bed icon at the top of the lock screen.
    Rad Systems apps on BlackBerry World
    Follow on Twitter, Facebook or BBM Channel: C0006BB16
    Tips to improve your BlackBerry 10 battery life (and avoid overheating)

  • All-in-one 6830 printer Does not enter sleep mode when connected to a phone line

    HP staff  help. HP all-in-one printer 6830 does not enter sleep mode when conntected to a phone line via 1-Line jack.  The Firmware is PNP1CN1521AR. On August 1, 2015,  I purchased an HP all-in-one 6830  printer and upgraded to firmware PNP1CN1521AR.When a phone line is connected to 1-Line jack of 6830, the printer will no longer enter  sleep mode and the display remains on indefinitly.Removing the phone connection either from the wall outlet or from the printer causes the sleep mode to work correctly again where the control panel display turns off after 5 minutes (or optionally  after 10 or 15 minutes).This problem was previously reported by a user and has not been resolved, see:http://h30434.www3.hp.com/t5/Other-Printing-Questions/Sleep-mode-of-Officejet-Pro-6830/td-p/4772182 The user did not receive a resolution to this problem according to the thread.
    There seems to be a  6830 printer firmware or hardware problem causing this. HP  should be able to confirm this problem on 6830 easily.
    Please advise ASAP.
    Thanks 

    It's a regular analog phone line. I've tested it with other phone lines. No difference. I have another all-in-one printer which works fine (goes to sleep mode) when plugged into the same phone line.
    The 6830 works ok in other aspects. The only problem is the sleep mode. Any 6830 with the firmware I mentioned should replicate the same result, regardless of anything else. The previous firmware to PNP1CN1521AR also created this problem according to the original report of this problem by another user.
    I'm sure there's a bug in the firmware. A subroutine in the firmware monitoring the incoming fax ringing, mistakenly, sees the voltage across the phone jack pins as an event and wakes up the printer instantly even though there's no ringing. As the previous user also suspected, there seems to be an error in the phone line voltage threshold used by the firmware. The present firmware always sees a ringing at the phone line which causes it to never stay in sleep mode.

  • How do I get My IPHone 5c to go into sleep mode when not using

    How do I set my IPhone 5c to go into sleep mode when not using

    Are you saying the screen never turns off?  That is controlled with auto lock in general settings.
    IF your screen turns off, your phone is going to reduced power state, but still looking for events. This is standby, and you see published standby times for the different iPhones. 
    There is no other setting between this and turning off.  So slightly different than a PC.

  • Prevent Macbook/Cinema display sleep mode when switching from plugged-in/off

    Hello, I've a macbook connected to a Cinema Display. On Energy Saver, all is set to never go to sleep. I'm trying to prevent my macbook going to sleep mode when I plugged off it. Do you have any solution for this?

    KinoBillie wrote:
    Hi tjk,
    Yes I mean when I disconnect the power supply (that comes from the Cinema Display) the macbook pro goes into sleep mode until i press a button on the keyboard, then it returns into running mode (even if in energy saver all is set to never go to sleep).
    I would like that, if there is a power cut in my house, the mbp does not go into sleep mode but continue to be in execution (by means of battery) avoiding sleep mode.
    Thanks
    Looks like someone already cut in to try answering, but I'll answer the question you asked me anyway. You can read Apple's directions http://support.apple.com/kb/HT3131 and see that unplugging is the cause. It's not really an issue, it's just the way it works.
    Contrary to the statement "There's no way around it." you may want to look into UPS (uninterrupted power supply) if it's important enough to you. I have never used one so I am not familiar with them, but by their very nature/purpose, I would think they'd do what you need.

  • Deactivate the sleep mode when closing the laptop cover

    Hello Everyone
    I was wondering if there's any way to deactive the sleep mode when I close the cover of my laptop.
    In Windows, we can do that.
    So, Is There any Way to close the cover and open it up without going in sleep mode? Because in sleep mode, it deactivates internet.
    Thank You !
    Max
    MacBook Pro Mac OS X (10.4.6)

    Try using an application such as InsomniaX for this purpose.
    (15861)

  • Turn off sleep mode when closing MacBook

    I used my flat screen TV as a monitor for the MacBook, but each time I closed the cover the MacBook goes into sleep mode. How do I shut this off, so it does not go to sleep mode when the cover is closed ?
    Thanks.

    There is no system setting for that. You can use an external keyboard and mouse and wake the MBP back up with the lid closed, that's 'clamshell mode'.
    http://support.apple.com/kb/HT3131
    The only alternative would be a 3rd party hack like InsomniaX or SleepLess.

Maybe you are looking for