Sleeping and hibernating mod don't work (Windows 8.1)

Hello everybody,
I just bought a Thinkpad S440 and upgraded to Windows 8.1.
My problem is that when I select sleep or hibernating mod the screen turns off but everything else like the hard drive and the fan is still running.
I have no idea how to solve this issue.
Thank you and happy new year

My system at the moment seems stable with sleep, catalyst, and switchable graphics - although I'm not really sure why.
The sequence of events was as follows:
-upgraded to 8.1, installed all drivers in lenovo System Update and Windows Update
-Sleep didn't work, tried installing the Intel HD 10.18.10.3345 drivers from http://www.intel.com/p/en_US/support/detect , plus whatever the site said I should update and was able to
-Didn't solve it, tried latest AMD drivers from AMD site
-Didn't solve it, tried beta AMD drivers from AMD site
-Didn't solve it, re-ran lenovo System Update and Windows Update
-Sleep worked
I'm not sure why it worked, but it seemed to work for me. I'm not even sure this can be replicated.

Similar Messages

IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.

I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.

Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

Sleep and hibernation is working on Server 2012 with started hypervisor! I do not know why...

Hi,
I enabled Hyper-V role in the Microsoft Windows Server 2012 on testing computer (PC with i7 CPU and 16GB RAM). I found very strange behavior. The sleep mode was enabled and after command “powercfg /hibernation on” the hibernation is also working.
I tested sleep (S3) and hibernation with started hypervisor and with running virtual machine. I tested sleep and hibernation triggered by power button and even with time-out that was set in the Power Options (I set sleep after 1 minute and
later hibernate after 1 minute and wait).
Sleep and hibernation is working! I do not understand why. Sleep and hibernation should be functional only on Client Hyper-V on Windows 8 and not on the Server 2012.
Some examples:
Testing workstation (i7, 16GB RAM) with Server 2012 and with started hypervisor:
C:\Users\Administrator>powercfg /a
The following sleep states are available on this system:
    Standby (S3)
    Hibernate
    Fast Startup
The following sleep states are not available on this system:
    Standby (S1)
        The system firmware does not support this standby state.
    Standby (S2)
        The system firmware does not support this standby state.
    Standby (Connected)
        The hypervisor does not support this standby state.
        The system firmware does not support this standby state.
    Hybrid Sleep
        The hypervisor does not support this standby state.
My laptop (i5, 8GB RAM) with Server 2012 and with started hypervisor:
>powercfg /a
The following sleep states are not available on this system:
    Standby (S1)
        The system firmware does not support this standby state.
        An internal system component has disabled this standby state.
                Hypervisor
    Standby (S2)
        The system firmware does not support this standby state.
        An internal system component has disabled this standby state.
                Hypervisor
    Standby (S3)
        An internal system component has disabled this standby state.
                Hypervisor
    Hibernate
        An internal system component has disabled hibernation.
                Hypervisor
    Standby (Connected)
        The hypervisor does not support this standby state.
        The system firmware does not support this standby state.
    Hybrid Sleep
        Standby (S3) is not available.
        Hibernation is not available.
        The hypervisor does not support this standby state.
    Fast Startup
        Hibernation is not available.
R. Revil
Relef Revil

Hi Ben,
I have nearly exactly the same Problem as Relef Revil.
I have Lenovo T510 Notebook with Core I7 and a Lenovo T420 Notebook with a CoreI5.
On my T510 S3 Sleep works perfectly with Hyper-V Role. On my T420 Sleep is disabled due to Hypervisor.
If I uninstall Hyper-V Role then Sleep works again as expected.
So, from a Little simple perspective, I Looks like this is a Hyper-V Thing or Problem.
I have als updated to the latest BIOS and latest Intel HD Graphics 3000 Drivers on this Win 2012R2 Maschine.
Also I have installed all possbile latest Versions of all other devices.
Could you probably give me an idea where to search for a solution.
So, what is the logic why Hyper-V disables sleep, when Sleep worked before?
I assumed that Hyper-V and Sleep ist generally possible on Win2012R2, especially when Sleep works perfectly when Hyper-V Role is not installed.
Kind Regards
Marcus
C:\Users\Marcus.Koenig>powercfg /a
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S2)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S3)
An internal system component has disabled this standby state.
Hypervisor
Hibernate
An internal system component has disabled hibernation.
Hypervisor
Standby (Connected)
The hypervisor does not support this standby state.
The system firmware does not support this standby state.
Hybrid Sleep
Standby (S3) is not available.
Hibernation is not available.
The hypervisor does not support this standby state.
Fast Startup
Hibernation is not available.
C:\Users\Marcus.Koenig>

Magic mouse, keyboard and track pad don´t work from sleep!

After coming back from sleep, the magic mouse, keyboard and track pad don´t work. I´ve tried everything and when this happens I have to restart may Imac. Help!!!

Hello jhspies,
After reviewing your post, it sounds like after you updated there are a few things having trouble. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
OS X Yosemite: If keys on your keyboard don’t work
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues - Apple Support
USB and FireWire Quick Assist - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My Microsoft Intellimouse back and forward buttons don't work in Firefox, but they do in IE and in Windows Explorer. It used to work, now it just stopped. Why and how can I fix this?

Forward and back buttons don't work in Firefox but do everywhere else.

Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).

In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Sleep and Shutdown issues after upgrading to Windows 10

Hi there,So I'm having issues with sleep and shutdown after I upgraded to Windows 10, the laptop won't go to sleep or shutdown properly. The screen turns off, but the power LED stays on and the fan as well. If I chose sleep it won't wake up no matter what I try, and I'd have to perform a hard shutdown everytime.Any solution for this problem?Thanks.

**I have posted this in another area with the same issue** YES!!!!! A Solution that worked. Spread the news. It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue. 1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS. If you have not done this before, proceed at your own risk. You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled. My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS. The Computer will restart and from that point on Shut Down, Sleep, etc. has worked. WOW this was a frustrating issue. Almost went back to Windos 8. I take no credit for this solution, I pieced it together from other posts on this issue. Hope this helps.

Volume and brightness buttons don't work anymore

I did a complete restore from factory DVD and since then the volume and brightness buttons don't work anymore. I have an All-in-One AE1900. Anybody can help me fix this problem? Since I do not have the original keyboard anymore, I can't use the hot key combination to do it. Thanks for your help.

I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work. Sound seems to work fine. They work fine in Mac mode.
Any solutions?

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login.

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.

You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support or OS X: Changing or resetting an account password - Apple Support
Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast.

Sleep and Home button doesn't work to restart, anything else to try?

Sleep and Home button doesn't work to restart, anything else to try?

You don't need to start another discussion about the same issue.
In order to continue along in a discussion just reply to anyone in the thread that you want to reply to. Do you see that word Reply - in the lower right corner of your description area where your text appears? When someone replies to you, you reply to them by clicking or tapping on Reply - in the post that the responder sent to you.
Start here for more help.
iPhone, iPad or iPod touch: Not responding or does not turn on
Pay attention to the very end of the support article about restoring the iPad. And by the way ... The battery does have a charge in it doesn't it?

Updated iPad and now bookmarks don't work says address invalid

Updated iPad and now bookmarks don't work Safari says address invalid for the bookmark symbol

Clear Safari. Close Safari. Reset your iPad.
Go to Settings>Safari>Clear Cookies and Data.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Safari app then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Ipad gets hot and then touch don't work..

ipad gets hot and then touch don't work..

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

I'm trying to get a public link to my pdf file? I tried the system's process and the links don't work

I'm trying to get a public link to my pdf file? I tried the system's process and the links don't work. I can't even copy the links I have to write them down and then enter them. Is anyone else having this problem. I've seen this question a couple times with no replies.

Hi mariondouglas,
Do I understand correctly that you've used Send to send a file that you've uploaded to Acrobat.com? What happens when you send to your own email address? Are you able to click the link in that email, and access the file that way?
If you're unable to copy the email in the browser window after you've generated a public link, please clear the browser cache, and try again. Or, use a different web browser (for a list of supported browsers, see System requirements | Acrobat.com).
Please let us know how it goes.
Best,
Sara

My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

Sleeping and hibernating mod don't work (Windows 8.1)

Similar Messages

Maybe you are looking for