SLEW OF ISSUES

issues amassed with iphone 3g!
here is a list of issues after restore:
no wake after pressing lock button,
ringer will not work,
volume for ipod is wacky,
phone vibrates 3-5 times per email push notification,
2 vibration pulses per flip of ringer switch,
slow operation,
keyboard shows pop up letters stay up a long time!
scrolling pages scrolls half a page,
"slide to unlock" doesn't always unlock,
app store and itunes loads SLOWLY,
youtube is SLOW,
facebook app shows up extremely weird.
Just terrible!!!!!!!!!!!!!!!!!
anyone else having problems!!????

3.1.2... And my phone is a virgin ( not jailbroken )
oh and i found more problems:
gps shows me in kansas, when i am in missouri,
when i press 1, it puts a 2 in place in phone,
songs repeat constantly when in shuffle mode,
safari is slow,
battery switches constantly form charging to charged,
clOck is always off by 1 hour even after a reset of time.
Thats what i have going on now.

Similar Messages

Windows refuses to install (slew of issues, specifically the partition)

Hello guys,
I'm using the iMac (Retina 5K, 27-inch, Late 2014), OS X Yosemite with a fusion drive). Previously I had Windows installed perfectly. I was running the tech build but after a few months I managed to mess it up due to driver issues. I decided to start over and reinstall the OS and use Windows 8.1.
I did a checksum on the ISO used for Windows 8.1 and it checked out. I also tried using Windows Enterprise (supposedly not support but it's worked before for me) and the Windows tech build again.
The first set off issues is that all versions tell me I can't partition the drive (windows installation screen). Then once I format it within the windows installation screen, it's the same issue.
I tried using Tuxera, still doesn't work. Windows Techbuild recommended me to use fat32. Still doesn't work, and makes me format it regardless.
At one point my partition got divided up.
And when I goto boot camp assistant I get "the startup disk cannot be partitioned or restore to a single partition".
I've lost hope and I can't repartition my entire drive at the moment. Is there a fix for this? I've also tried deleting the partition within Windows, making it free space. That manages to get me to the install screen but it gets stuck at ZERO percent and blames my source media (although the checksum is correct and it's done the same with Windows 8.1, Enterprise, and the Tech Build.
So many problems. I've been using bootcamp since about 2007 or 2008? Never had these issues.

It is a fusion drive. 1 Tb. I've used BC assistant to format the drive, I've used Disk utility, I've used the windows installation screen. It's been messy because I've had to systematically see what could work and it hasn't be working in my favor. Not bootcamp won't format the drive . It shows this.
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         897.9 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
   4:         Microsoft Reserved                         134.2 MB   disk1s4
   5:                        EFI NO NAME                 104.9 MB   disk1s5
   6: DE94BBA4-06D1-4D40-A16A-BFD50179D6AC               314.6 MB   disk1s6
   7:                        EFI NO NAME                 104.9 MB   disk1s7
   8:                        EFI NO NAME                 104.9 MB   disk1s8
   9: DE94BBA4-06D1-4D40-A16A-BFD50179D6AC               314.6 MB   disk1s9
10:                        EFI NO NAME                 104.9 MB   disk1s10
11: DE94BBA4-06D1-4D40-A16A-BFD50179D6AC               314.6 MB   disk1s11
12:                        EFI NO NAME                 104.9 MB   disk1s12
13: DE94BBA4-06D1-4D40-A16A-BFD50179D6AC               314.6 MB   disk1s13
14:                        EFI NO NAME                 104.9 MB   disk1s14
15: DE94BBA4-06D1-4D40-A16A-BFD50179D6AC               314.6 MB   disk1s15
16:                        EFI NO NAME                 104.9 MB   disk1s16
17:       Microsoft Basic Data                         98.8 GB    disk1s17
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *1.0 TB     disk2
                                 Logical Volume on disk0s2, disk1s2
                                 3DFC77B6-760D-4557-9406-84285ABC8F70
                                 Unencrypted Fusion Drive
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk3
   1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk3s1
Arashs-iMac:~ arashsahba$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 2BF7B76A-40C7-4DFD-9379-3A5D64F31CB5
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         1018855284736 B (1.0 TB)
    Free Space:   114688 B (114.7 KB)
    |
    +-< Physical Volume F312D5A6-75D9-4761-86DA-9DA88629E0A0
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120988852224 B (121.0 GB)
    |
    +-< Physical Volume D3CFCF99-72D9-4FC3-A9D0-37C782F8AA78
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     897866432512 B (897.9 GB)
    |
    +-> Logical Volume Family D46909CB-3525-4D90-A08C-F6B36B08F1BB
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 3DFC77B6-760D-4557-9406-84285ABC8F70
            Disk:                  disk2
            Status:                Online
            Size (Total):          1012999913472 B (1.0 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
Arashs-iMac:~ arashsahba$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 236306352      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
236715992     262144      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
236978136          7
236978143         32         Sec GPT table
236978175          1         Sec GPT header
Arashs-iMac:~ arashsahba$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 - 236978175] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused "

Updating Issue with iTunes 7.0.1.8

A few weeks ago I made the jump to the newly released iTunes 7.0. I had a slew of issues with this update (which by the way Apple has still not provided a working solution for), which I addressed in detail in this post: http://discussions.apple.com/thread.jspa?messageID=3170496#3170496
Today I updated to the new iTunes 7.0.1.8. There were no issues during the installation itself, however afterwards is a completely different story. When I attempt to open iTunes, I receive the following error message: "This action is only valid for products that are currently installed."
My first thought was to see if Quicktime is working normally. It is. No problem there. I thought perhaps I should try repairing the installation. So I went to Settings > Control Panel > Add/Remove Software > iTunes. I attempted to use the 'repair' option. This did not work at all.
At this point I restarted my computer and uninstalled iTunes. I restarted once again and reinstalled. When the installation had finished I received the prompt, "would you like to run iTunes after the installation is completed?" I clicked 'yes.' iTunes opened, no problem.
I closed iTunes and attempted to reopen it normally. It would not open, instead giving me the same message: "This action is only valid for products that are currently installed."
I thought the previous issues with iTunes not recognizing my iPod were bad enough but now I can't even open iTunes at all. This is absolutely unacceptable on Apple's part. It was bad enough that they released 7.0 with all its bugs, but at this point they should have their act together. Instead the problems are getting worse.
Dell Dimension 4600 Windows XP Pro

Please let me know if I can get rid of this feature.
You sure can.
iTunes View menu > Hide MiniStore will do the trick.

MacBook Pro Will Not Restart & Other Issues

Ever since "upgrading" (I use that term loosely) to Lion, I have seen a slew of issues on my MacBook Pro. Now I recognize that my hardware may be outdated (I have a late 2007 MacBook Pro), but that should not mean that I should be encountering all of these issues.
First of all, I work in the Web Development and IT field, so please, throw all the technical jargon you can at me. I'm well versed. Also, I have already run a hardware diagnostic, I have NO issues whatsoever.
1. My MBP will not restart MOST of the time. I get the spinning grayscale wheel on a gray background most of the time when I go to shut down. It has sat there for up to 3 hours before I have to force it to shut down via the power key. What gives?
2. I have never seen such terrible performance of my MBP since Lion. Before finally getting a usable desktop, it takes about 10 minutes from startup.
3. This is by far my strangest issue. I'm a Chrome user, but for nearly any program, it will not let me scroll until the content is fully loaded. It just sits there loading and I can't scroll at all. This happens probably 15% of the time a page loads, but this is a big deal.
My MBP is a Core 2 Duo 2.2GHz, 4GB RAM and a 500GB 7200RPM HDD running Lion 10.7.2. I know it's not a speed demon, but seriously, this behavior is unacceptable. Going to roll back to Snow Leopard unless any of you have some insight.

i replaced my hard drive and put osz back on now im trying to update but will not update supost to restart then update but instead of restarting it goeses to update and i have to shut it down pleas ignore typos im trippen

Keyboard/trackpad Unresponsive during Windows 7 Install

I have spent days scouring online forums troubleshooting issues that have arisen at virtually every step of the process. There seems to be a whole slew of issues people are having in addition to my own.
I had to try many workarounds to resolve the issue where Boot Camp 5 gets confused over whether you are installing the 32 or 64 bit version. Really dumb stuff... that should never have released in such a disjointed state.
You shouldn't have to hack such massively mainstream products just to get them to work. I have a job! But installing Microsoft apps is a full-time job itself. Are they out to lunch? Did Apple completely shut down? From what I'm reading they appear completely disengaged from their products. Tons of threads over tasks that should be simple. The slightest variation derails the installation process. It various from mac machine models, right side usb ports vs left side ports. This is a very expensive and time consuming joke being played on us consumers.
I am now CURRENTLY stuck.....
I have a new MacBook Pro 15" retina. I finally ran Boot Camp successfully and I downloaded the Apple Support Software although its location is a mystery. I get stuck at the very first installation window (Windows 7 Premium) asking to select the language. My keyboard and trackpad are unresponsive. I am NOT talking about wireless devices which is an issue flooding other threads.
I have to hold down the power button to get out of it. And after a couple of attempts the entire 5-hour long Boot Camp installation get undone and my Windows designated partition returns to being empty. Is there no pride in their work? Why burden their customers with their problems? Is their only demographic mac geniuses?
I have Windows 7 on dvd which I put on a thumb drive after learning how to convert it to an ISO image, a step MS is apparently too lazy to do. It took only an hour to do but a full day do discover what the problem was.
None of this would even be an issue if I didn't need Windows. Apple used to be able to run anything on its own. What happened?

Hi Craig,
Apple advice is to use USB-connected keyboard and mouse during installation of Windows.
+"The drivers for your wireless mouse and keyboard are not installed yet, so you cannot use them. The use of a wired mouse and keyboard is required to install Windows. Once your installation is complete, you can install the Apple Windows drivers off your Mac OS X DVD. Then, pair the wireless mouse and keyboard to your system using the Bluetooth Control Panel."+
http://support.apple.com/kb/HT3777
Any PC- or Apple- USB keyboard/mouse should work.
If you don't have such try to borrow from a friend or colleague.
Regards
Stefan

Cannot update published website without errors: requires deletion of site, then creating a new one.

Hello all,
This has been a long persisting issue since we purchased Muse in January 2013, but has since then led to a shutdown of my office's website and email in September. Multiple support technicians were eventually able to restore the website, as well as our email function, but the core of the problem lies in the fact that when I update my website, it becomes entirely scrambled, and the only solution provided to me right now is that I need to delete my site completely (through Adobe Business Catalyst) and then create a new one, while transferring over the same domain information. I have yet to receive guidance on how to resolve this issue properly:
September 06 Email: detailing the series of events
Good evening, Zak,
I am reluctant to bring this to your attention because of the comprehensive nature of the following, but I have been told that my absolute last effort should be to contact you with what has been a persistent problem since the last time we had mediated this particular issue. Essentially, when publishing a website multiple times, sooner than later the format becomes scrambled when viewed online. I am being told I am the only customer known to have this issue, and that it needs to be investigated deeper.
This is a blurb from our original conversation in March 2013:
(The whole thread may be found at the following address: http://forums.adobe.com/message/5653912#5653912)
9.Zak Williamson (Adobe),
Mar 12, 2013 4:03 PM in reply to essbarr
I'm also puzzled. This isn't a problem I've seen before for a site published to Business Catalyst.
Please try publishing again, this time to a new temporary site (they're free). You can choose this option under More Options in the Publish dialog. I'm curious whether publishing to a new empty trial site works.
If that doesn't work, please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, SendThisFile, WeTransfer, Dropbox, etc.
Thanks.
10.essbarr,
Mar 13, 2013 6:49 AM in reply to Zak Williamson (Adobe)
Hi Zak,
I published the website to a new temporary site, and it worked beautifully. Now I just have to fuss with the horizontal bar, and then I'll be super happy. Thank you for your help!
Sincerely,
Sarah
Since this bit of advice, I have freely published to a new temporary site every time the website gets scrambled. I have had temporary websites titled:
argponline01.businesscatalyst.com
through
argponline15.businesscatalyst.com
along with a bunch more than I cannot recall.
and Muse files titled:
argp-uc.muse
argponline.muse
argponline_02.muse
through
argponline_05.muse
argponine_3A.muse
argponline_3B.muse
and currently, my file name is
argponline_4.muse (dropbox link)
I am using Muse on a Mac Powerbook, OSX 10.8.4.
I don't know how much of the above is relevant, but maybe it makes a difference to you.
The timestamp on the following thread says September 5th, 2013 4.50AM, but I really sent it the evening of September 4th, 2013. No difference anyhow:
http://forums.adobe.com/message/5653912#5653912
What was going on in detail:
1
I made a few changes to my argponline_4.muse file on September 4th, 2013.
The published website at that point was argponlined.businesscatalyst.com (D).
The domain name was argponline.com .
(D) was published probably about two months previous, maybe longer ago.
When publishing (D) on September 4th, 2013, the website appeared scrambled.
I tried to publish only modified files, as well as publish the entire site, as well as close programs, and restart the laptop.
I decided to follow the advice given previously, and I published and launched argponlinef.businesscatalyst.com (F).
2
At this point I have two bookmarked websites for Adobe Business Catalyst Admin Consoles.
For (D), the Admin Console address was argponlined.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
For (F), the Admin Console address was argponlinef.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
I was able to sign into both.
When signed into the Admin Console for (F), I tried to Add a New Domain, but was told that I only had a plan for one hosted website through Adobe Business Catalyst, and that I would need to purchase a plan that offered more hosted websites.
I signed into the Admin Console for (D) and deleted the domain, but given the option to keep associated files just in case, I opted yes, to keep them.
When signed into the Admin Console for (F), I tried to Add a New Domain, but received the following error message:
Domain already exists. Please delete all records associated with this domain before re-adding it.
There was nothing visible though the Admin Console for (D) to delete the associated records, so I deleted site (D) in its entirety.
I continued to try to Add a New Domain for (F), but continued to receive the same error Domain already exists...
3
At this point (the morning of September 6th, 2013) we have the following set of parts:
The published and launched site is argponlinef.businesscatalyst.com (F).
For (F), the Admin Console address is argponlinef.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
The website is now completely down, and I have disrupted email service for the office.
I chatted with Lokesh, who determined this was a technical issue, and I was forwarded to Anshul.
Anshul's assessment is as follows:
Anshul: I see the error, Sarah it seems there are some Domain traces left with the system , I tried to clear then out and I am getting errors as well. In this case , we might need to escalate the case to higher level to have deeper investigation related to this issue.
Anshul: Sarah, the issue is the domain not the site. It seems like there are some traces related this domain in the backend. This issue is more of related to BC and not Muse. I will have this issue escalated and checked with the team and request them to run internal queries to clear the traces and then you should be able to add the domain.
4
Soon after I received the following message from Matt Baracz:
Matt Baracz (Adobe Business Catalyst Support)
Sep 06 10:50 (EEST)
Thank you for contacting us.
I have escalated this issue to our engineering team and have requested them to clear any references to the domain argponline.com from our database. Once cleared, you will then be able to re-add the domain successfully to your site.
As soon as I receive a response from engineering confirming that this has been actioned, I will let you know directly via this support ticket.
Regards,
Matt.
Around 3 or 4pm, I had not heard anything back, so I attempted to Add a New Domain through the Admin Console for (F). (Turns out Matt works in Australia, and was unable to alert me due to the time zone difference. Understandable!)
This was done successfully, so the website began to work again, but the email was still down.
5
I began a chat again, this time with Srividya. I was transferred to technical support and began conversation with Sanjit. The length of our conversation was probably around 3 hours, and I am so grateful for the time he put in. What a great guy.
He stated that he had gone through the case details and that Engineering had fixed the issue. We spent some time coordinating the Site Domain information through the Admin Console for (F). Ultimately, email is still not working (settings were probably updated around 5pm), but I understand sometimes it takes a while. Just wanted to note, the last time I updated the email settings it worked within a couple minutes. Varying lengths of time are expected, but I am still curious what effects those variations. Regardless.
6
The current situation is this:
My boss is a bit steamed that our website was down for a day and a half, and that our email is down for a relatively indeterminate amount of time. It's bad for business, and ultimately, I am responsible for these disruptions. I am incredibly concerned that the next time I update our website there will be a slew of problems, which have the potential to knock down service for the website and email again. I am desperate for a surefire way to simply and fluidly update our Adobe Muse website to Adobe Business Catalyst without making the same mistakes again.
I don't believe I did this the right way. I looked at FAQs, Community Forums, goDaddy Support and anything I could lay my eyes on to try to do things properly, but managed to make a few well-intentioned blunders. I continued to try undo the damage I've done in the past couple days, and with utter frustration, have not been able to fix them on my own. The people who have helped me thus far have done an amazing job, but ultimately, I am happier when I am not taking up their time, or panicking here.
When I first launched the website a few months ago, there was a step-by-step process that took me through every single action with screenshots included when appropriate. It was exponentially helpful. I was so lost without it this time around, and I was wondering if I could access it again in the future if needed.
The following is a blurb from my conversation with Sanjit tonight:
Sanjit: You have purchased Muse subscription , correct ?
Sanjit: or Creative cloud >
Sarah Rushing: Yes, we purchased Muse for 1-year, as well as Business Catalyst for 1-year
Sanjit: Perfect
Sanjit: With Muse you get 1 free site , so once you create a site and then publish to BC. In admin console you launch the site, that makes your free count used. Now if you create another site, then system asks you to upgrade the site to a paid site plan. ut when you delete the previous site then the free count becomes free and can be used for any other site
Sarah Rushing: Yes, that is what I did. Is this what I need to do each time? Because I am concerned that the email and website will be disrupted every time I need to make slight adjustments to the website?
Sanjit: No, you dont need to do that everytime. If the site is scrambled everytime you publish then please report to us. Thats not the ideal way for solution.
Sarah Rushing: Well Sanjit, I can tell you right now, that is how it has been functioning since we bought the program. I am not entirely certain, but I believe we bought Muse and BC in January.
Sarah Rushing: I can absolutely guarantee you that the site will inevitably scramble. Am I the only customer you have heard of to have this issue?
Sanjit: Yes, i have not seen any other reports for this issue
Sanjit: Well this needs a deep investigation
Zak, anything that you could offer for clarity of process, would be incredible. I don't know if you will have time to look at this before Monday, but I can tell you I will be available at a moment's notice to fix this issue and to learn anything about Muse and Business Catalyst that you have to offer. Thank you for your time, and I hope you have a wonderful weekend.
Sincerely,
Sarah Rushing
I'm concerned that no one will really read this because it is so detailed and boring and comprehensive, but it is absolutely critical that I find a proper solution before the next update to the website. Thank you so so much to anyone who can possibly provide some insight into this issue.
Sincerely,
Sarah Rushing

In case anyone is experiencing the same issue, I am trying this today.
Sachin: Okay Sarah, so is it everytime you try to republish the website, it gets scrambled?
Sarah: Yes, that is correct. And the solution thus far was to publish to an entirely new site, meaning delete the existing one on Business Catalyst and transfer the domain information.
Sarah: The last time I did that I experience a slew of issues that resulted in no website and email for 4 or more days. My boss was very angry.
Sachin: Sarah, can you publish your site as a new trial site once.
Sachin: And provide me the URL.
Sachin: Then republish on the same trial site and let me check the results.
Sarah: If I updated the published site within the period of a day, it will be fine. It is when I update the next day or later than that, then the website appears scrambled. So I can create a trial site for you, but it will behave normally for now.
Sachin: Sarah, while republishing the site, did you select "Only modified file" or "All files" while publishing?
Sarah: I tried everything.
Sarah: I made a few changes to my argponline_4.muse file on September 4th, 2013. The published website at that point was argponlined.businesscatalyst.com (D). The domain name was argponline.com . (D) was published probably about two months previous, maybe longer ago. When publishing (D) on September 4th, 2013, the website appeared scrambled. I tried to publish only modified files, as well as publish the entire site, as well as close programs, and restart the laptop. I decided to follow the advice given previously, and I published and launched argponlinef.businesscatalyst.com (F).
Sachin: Okay. there is one more thing I would like you to try.
Sachin: Publish a site as a trial site.
Sachin: Then wait till tomorrow.
Sachin: After that login to the admin panel of the site.
Sarah: Okay
Sachin: There go to Site Manager>File manager
Sachin: There will be a file there named Muse_manifest.xml
Sachin: Delete that file and then republish the site from Muse.
Sarah: So in the Adobe Admin Console, underneath Site Manager, I see Web Forms and System E-mails. No file manager?
Sachin: Please hover the muse on your name at top right corner and click on My details.
Sarah: Okay, yes.
Sachin: Now scroll down and check the option that says Enable online content editing (incompatible with Muse)
Sachin: And then click on save.
Sarah: What does this do, and why does it say it is incompatible with Muse?
Sachin: It will help you see other options in BC.
Sarah: Okay, thank you.
Sarah: I see the File Manager now
Sachin: Okay.
Sachin: Now select the file named Muse_manifest.xml
Sachin: And use the delete button on the right side.
Sachin: but do it tomorrow
Sachin: With a trial site
Sachin: Not with the live site.
Sarah: Okay, could you please explain to me what deleting that particular file is supposed to do? I am just very interested in how this works.
Sachin: This file contains the information about your last upload.
Sachin: Deleting it will make sure that "ALL" the files are uploaded again from Muse.
Sarah: Okay, so:
Sarah: I will publish a trial site.
Sarah: Wait until tomorrow.
Sarah: Publish again. If I have an issue, I can log-in to the admin console for this particular trial site and go to Site Manager --> File Manager, and delete muse_manifest.xml.
Sachin: I will create a case for you and you can respond to the case.
Sachin: Correct.
Sarah: After that, I will try publishing again and see if it resolves the issue.
Sarah: That would be great, thank you Sachin.
Sachin: Thank you for contacting us. Have a Good Day!

"New Event" constantly showing up

So a bit of background.
After my wife upgraded her macbook to Lion we have had a whole slew of issues. Apple has been awesome in fixing them for us or getting us the "next best" solution to a problem.
However, there is one that has been persistent since she upgraded to Lion and this issue seems to be something that was apparently "supposed" to have been fixed in the 10.7.3 update. I am talking about "new event" showing up in iCal.
Now my wife uses her Macbook Pro for her business and schedules clients months in advance only to have this issue rear its ugly head a few times a month (this month seems to have been the worst for some reason). I believe I have the issue narrowed down but I wanted to see what you guys thought.
Here is her normal scenario:
- My wife works in a salon with wireless internet (patrons use it and there are a few other stylists that do like she does)
- She schedules all of her clients with notes on what will be done months in advance (normal clients come in every 4-6wks and will schedule 3 and 4 appointments out)
- While she is not using the Macbook it sits on a shelf at her station, in sleep mode, which she will then promptly wake it up and start looking fo a new date for the next appointment (I would get this takes about a minute with back and forth with the customer)
- She schedules the customer one, if not two or three, appointments out and then proceed to go ring the customer up at the main desk
- Many times the laptop just sits there and stays on while she does this and then moves on to her next waiting client (believe me, two degrees in business management and IT and my wife still makes more money than I do, DO NOT make fun of these people that are passionate about their work )
- Just about every night she connects her laptop to her WD Passport (for Mac) to do the incremental backup
This is her normal scenario however as she reviews her upcoming day that evening (gives me a better idea of when she will be home so I can clean house, play with dogs, work on my Cruiser, play video games, etc) she will see the fabled "New Event" sitting in her days work.
Now this "New Event" is default set for 1hr of time and does not have any notes (my wife emails confirmations to her clients so the email feature from the calendar is sent out) and she has no idea whether she has someone coming in for a full weave (a 2 to 3hr job) or just a trim (30 minutes). We have tried to replicate this issue at home on our wireless network (Airport Extreme) and we get nothing.
What I am thinking is that the internet, at least once a week, goes down at her salon and what is happening is when she is connecting to the network after a wake-up that the system is then attempting to connect to the internet and the iCal servers (she uses iCloud to back up all this information and see across the internet and our iPhones). When this happens there may be a "hiccup" in the connect and so when she types the information it has yet to syc with iCloud (her computer is set to primary house for main copy). When this happens and the system finally DOES connect it is some time later and it is then trying to sync everything and these "new items" that she has just entered become "new events."
Am I logical in my thinking of this?
Our main concern is that she does not know what these "new events" are so she cannot plan her next client accordingly, let alone send them their week-of confirmation email.
- Do you guys think that not putting her computer to sleep (buying a secondary wall adapter for the salon) so that it is always connected to the internet a remedy?
- Could this be an issue with the salon's internet having "hiccups" and should we look at investing in our own personal hotspot?
- Is there a chance that we could possibly set the "iCloud" sync to only happen at a predetermined time (i.e. 11pm at night when we know she will be home and connected to our home network)?
Not quite sure how to proceed here.

Still have not been able to find a resolution to this issue. My wife is down to one remaining "new event" item in her calendar so we are hoping that the last fix that came through had taken care of whatever the issue was.
However, she did say the other day while scheduling a client she did notice that they system began to sync with iClound while she was entering information and the event suddenly changed to the dreaded "new event". She caught it this time so she was able to adjust the information but I believe this may be solidification to the fact that if you are entering something WHILE your system is attempting to sync with iCloud that it will be overwritten and come up as a new event. I have yet to fully test this but it seems to be a very situational type of issue.
She has not taken to heart that this may just be something she will have to live with and will need to be more aware of what is going on. Unfortunately, I have not had a chance to see if there is a way to "schedule" when you want iCloud to sync with your devices so that it is more of a "manual push" vs. an automated one.

Downloads and Desktop no longer exist on my Macbook Air

Hello -
I am at a loss as to the issues I have been facing on my Macbook Air - OSX 10.9.5. I have been experiencing a slew of issues, which I think may be symptomatic of something larger... Here are a list of issues I have found so far:
1. I have no downloads folder. Under Finder, there is an icon for Downloads and Desktop but they are not folders and when I doubleclick on them, I get a popup that says "The operation can’t be completed because the original item for “Downloads” can’t be found." Same thing with Desktop.
2. I cannot save anything to my desktop. The error reads "You do not have permissions to save files where screenshots (or whatever file) is saved."
3. I cannot download files. I really need to launch and download GoToMeeting, but each time I try, it gives me the error "Unarchive File has Failed."
4. I don't have Flash capabilities, even though I do have flash on my laptop.
I have talked with Apple Tech Help 2xs - they advised me to reinstall OSX. I did that, this did not solve the problem. I then erased my disk utility, after backing up, and reinstalled OSX. Still, no resolution to my problems.
Any ideas on what could be happening?
Thanks so very much,
Bea

This should explain:
Mac Basics: Dictation lets you speak text instead of typing - Apple Support
Note in general dictation requires an internet connection. (But also see "Enhanced dictation" in the article.)

Does 11.1.1.6 OBIEE simple install work properly on Windows 7 64 bit OS?

Can anyone confirm if the simple install for 11.1.1.6 simple install works normally on Windows 7 64 bit OS? I have run into a slew of issues including:
1. hanging on the Create Domain. Stays at 0% for 2 hours and then fails
2. Pre requisite checks do not work in a stable way (sometimes they fail and need to be ignored and other times they succeed)
I removed all Oracle software and tried a completely clean install (DB, RCU, OBIEE, etc)..I have my loopback adapter set and also have JDK.
Do we need to manually do the WLS + Software only to get this to work or does the Simple install actually work on Win 7 64 bit??
Thanks.

According to the certification matrix, it should work: http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.html
Check row 72/73 in Current System Certification. Also, what do the logs say about the errors you are facing?

Can't see video when select video call on iphone 6

I have a iphone 6 version iOS 8.2 with skype app version 5.10, all functions works fine but video call. the icon of video call on the iphone doesn't respond (it stays blue when you click it and no video shows up), camera was turned on in setting also under privacy, I can use camera to take my photo for screen photo, that means the camera was setting correctly, When I use finger to cover camera on the phone, the whole screen becomes black so I think the camera is working, but only video call doesn't work, can anyone help? Thanks a lot in advance.

As Meg St._Clair said in another thread - we are seeing a slew of issues from AT&T's VoLTE feature so much so that if someone is on AT&T and has a calling issue - that is the first piece of advice to try
I am glad you had a happy ending and thanks for taking the time to post - it certainly helps
I am surprised though they kept running tests after your SIM did not work in a Samsung phone - I would have considered swapping it out at that point - ah well!

Windows update borking brand new server 3 times in a row...

Hello all,
here's an interesting one for you all.
our company recently deployed a new server.
server 2012 r2
configuration
setup
all worked correctly
after all was done, updates were installed, afterwards the server would have a black screen of death over rdp and a slew of issues locally.
tried to remotely deploy http://support2.microsoft.com/kb/2897632 which was supposed to address this.
no go...
since this already happened 3 times in a row i'm not quite sure how to go about this apart from disabling updates or excluding the problematic one. alas not sure which one it is.
what should the next course of action be? restore backups or re-image are fruitless since the same update will render it bad all over again.

That is not a scripted answer. It might be that you have a driver that is not compatible with recent Windows Updates which might cause that: That is why I have made the previous suggestion.
I never heard about black screen issue after the one fixed by KB2897632. My recommendation would be to check with your server support if they have known compatibility problems for Windows Server 2012 R2 running on their hardware.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Blackberry Z10 10.3.1 Bugs (so far...)

After updating to 10.3.1 I have a slew of issues that I am going to list off that perhaps can be (and SHOULD be) fixed as they were clearly not tested properly before release (if at all):
1) Texting problems most likely related to the inability of the phone to pull up the old archive of messages, this has happened before on previous updates and still plagues the Blackberry software. The problems range from texts not sending, to nothing showing up in the text message field when typing or just not opening up a contact's previous messages at all.
2) The improper functioning of the notification system. Even having the phone set to the silent profile yields alerts, vibration and other notifications. How can something so simple and basic not be working properly?
3) A substantial delay between pushing the power button and the phone actually turning the screen on, about 5 seconds. This did not happen before the update and now I have to sit there wondering if I pushed the power button hard enough only to have it turn off due to the previous attempt registering late.
The only way to make texting work again was to completely delete my history with some contacts, which put simply, is inane. Why would I have to delete my archived messages to make new ones work? As someone who writes software, these things should have been tested and ironed out BEFORE release, not just carelessly given to users. I am not impressed with this sloppy release and can only imagine what other bugs have not been found yet.

Some of what you are referring to are bugs in the OS that, I'm told, are fixed in 10.3.2 coming soon. The phone continuing to vibrate after you answer is one for sure. However, it should only vibrate once or twice after, not 3-4 minutes. I would recommend making a full backup of the device using Link, then do a security wipe. Before restoring your backup try the phone again and see if things work normally. If they do, go ahead and restore your backup and see what happens after you do so.

Why Did I Have to Re-Set My Parameter RAM

Today while using Airport wireless, for an unknown reason my connection was terminated even tho my Airport wireless continued to work (self assigned IP address).
I have also a D**l laptop which continued to receive my wireless router and was not affected whatsoever.
With assistance from Apple phone tech, I was able to once again to connect to my wireless router and rejoin the internet.....after re-setting the 'parameter ram'.
What would be typical (if any) causes of this problem (or others) which would require re-set of the parameter ram?

Pram is a cache of several system environment variables. It's function can be similar to a bios chip on a PC motherboard and it can speedup boot times.
Apple discusses it here: http://support.apple.com/kb/HT1242
Now that article says that network information is not stored in the Pram, but there's always a chance that the Pram data can become corrupted by a kernel panic, power outage or other surprise. This corruption could interfere with other devices on a system.
I Zap the Pram on machines that seem to be having problems finding their boot drives or other strange startup/hardware problems.
I don't think I would have thought of it for a wireless problem, but why not? It's painless and fixes a slew of issues.

WHY WON'T MY MUSIC SYNC TO MY IPHONE???

I have bragged about Apple for years. I've sunk thousands of dollars into Apple devices, as well as apps, music and movies from iTunes.
Now, all of a sudden, I'm having a slew of issues. First my movies - purchased from iTunes - wouldn't play correctly on my computer. The picture and sound fall out of sync. I spent 20 minutes on the phone with a friggin' SUPERVISOR and we still couldn't fix it! It's not space issues - I'm not even using one quarter of my hard disk space. I did everything he told me to do and they still won't play.
Guess what happened today? I'm getting the ridiculous "-50" unknown error message when trying to sync music I purchased FROM iTUNES onto my iPhone. Oh, it plays just fine on my computer. I had several of my playlists loaded onto my iPhone already. I visit the forums, and everyone says I should reinstall iTunes and restore my iPhone - so I do those things. Now all of those playlists need to be put back on to my phone and NOTHING WILL SYNC TO MY PHONE!!!
I am one VERY short step away from ditching Apple forever. I am sick to death of having to deal with constant issues. Everything worked great until a couple of months ago, now you people cannot do anything to fix the issues your incompetent techs are causing.

Hello alexandreak,
It sounds like your newly purchased music is not syncing your your iPhone. I found a couple of resources that I think might help with this.
One thing you may want to consider is downloading the purchased songs directly to your iPhone. You can find the steps to do that in the section titled "iPhone, iPad, or iPod touch" in the following article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
If you prefer to sync the music to your iPhone using iTunes, I recommend turning off and turning on syncing music. You can do this by unchecking "Sync Music" and then clicking "Apply" and then checking "Sync Music" and then clicking "Apply" again. You can find the syncing steps in the following article:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Additionally, it is important to note that songs with a cloud icon next to them in iTunes are streaming from iTunes and are not on your computer. For these songs to sync to your device, you will need to clck on the cloud icon to download the song to your computer first.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Edsinvalidreference -14071 re: Workgroup Manager

Hi all,
I have a fairly debilitating issue with my Lion Server.
Within Workgroup Manager I am finding the following error occasionally that has disabled my WGM - this is used to manage public machines, and right now they have no dock .
Error of type eDSInvalidReference (-14071) on line 3719 of /SourceCache/WorkgroupManager/WorkgroupManager-400.3/PMMUGMainView.mm
I have taken a few steps to troubleshoot this error already - here they are.
Yes - I have rebooted.
Yes - I have tried using ladmin and diradmin (not actual account names, just using it to designate types of accounts used for actions) for the actions mentioned below.
Having read a number of different things indicating a slew of issues, I have backed up the OD Master and demoted the master. After re-promoting the OD master and restoring I was able to edit records, create new records and all was happy. After doing this, a few minutes after creating new records and adding policies to new computers i recieved the same error. This machine is bound to an AD domain which has a schema to allow Unix UID's - I have checked to make sure that the object still exists and is current and not disabled, not directly related but just making sure that all was well with configurations.
As stated with my username, I am fairly new to Mac Server os troubleshooting - to this point whenever I encountered errors, I simply restored an older version of the OS using TimeMachine. I will not grow personally continuing down that path .
I did previously have an issue with the FileSharing service that was resolved with a TimeMachine restore. The FileSharing service was registering with the GUI as running, but nothing was accessible.
Any input for initial troubleshooting for this noob is greatly appreciated. Thanks!
Best,
MacServerNoob

Allright, so I queried the LDAP DB and, as Michele suggested, there are indeed traces of this user account. The whole record seems pretty messed up: the 'sn' attribute has the original UID as its value while the 'uid' attibute is now 'untitled_1'.
At this point, could anyone suggest a best practice approach to removing this user account from the system? Would running ldapdelete on this record be sufficient or will this leave traces of this account elsewhere? I searched this forum for an answer and reviewed the Command-Line Administration guide for 10.5, but couldn't find a precise answer to this.
Thanks again for any advice.

SLEW OF ISSUES

Similar Messages

Maybe you are looking for