Slient install of Sql 2012 enterprise fails 'MEDIALAYOUT' is invalid"
I'm trying to install SQL 2012 using the config file. It's failing and reporting 'MEDIALAYOUT' is invalid. The problem is that this isn't even a parmater that exists in the file. I know it's finding the file, because it I put a bogus file name there, it
complains and says "invalid file". So i think it's reading the file, doesn't like something in there, then it kicks out this erroneous error that means nothing. I've looked in the event logs, see nothing.
Has anybody seen this before? It not, is there any other log file I can look at that will tell me specifically what might be wrong?
.\setup.exe \ConfigurationFile=ConfigurationFile.ini
The specified value for setting 'MEDIALAYOUT' is invalid. The expected values are:None, Core, Advanced, Full
THX
Can you make sure that the config file is valid and comment lines are not text wrapped.
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.
Similar Messages
-
Hi friends,
i have tried to install ms sql 2012 on windows 8.1 pro 64 bit but it got failed due to the following error 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel..
I had run the set up file as administrator. I have ony one user account on my laptop. I have seen in the regestry about permission of user. There is full control to the user. I have also tried the solution related to this issue that are available in
this forum and other.
I have also attache the detail.txt log file here
So i am heartily requesting you guys if you have the solution then please post your solution as soon as possible.
Thanks in advance!!!Looks like this is a permission issue with account you logged in in your operating system or account if any you chooses to run you SQL Server installation . Or for executing setup file try using run as administrator.
http://www.sperrysoftware.com/kb/questions/7/How+to+Troubleshoot+a+%22Error+1406%3A+Could+not+write+value...%22+or+%22Error+1406%3A+Could+not+write+InstanceIndex+to+key...%22+error+message
http://support.microsoft.com/kb/913559
Raju Rasagounder Sr MSSQL DBA -
Unable to install SQL 2012 Enterprise on Windows 8.1 OS
I had installed SQL 2012 Enterprise on my Windows 8.1 and was running successfully. I faced some SSRS & SSIS Authentication issue. So i decided to uninstall SQL and re-install it. On doing so, i am unable to install it.
Wizard disappears from this screenshot onwards.
Tried installing from Command Prompt.
Setup.exe /q /ACTION=Repair /INSTANCENAME=instancename /IAcceptSqlserverLicenseTerms=true
Still wizard disappears.Hello,
I guess un-installation of SQL server is not complete and there are fragments remaining.Have you made sure you have uninstalled SQL server from add remove program completely.Make sure no features related to SQL server are present there.Please remove setup
support files as well.Refer below link to remove it completely
http://technet.microsoft.com/en-us/library/hh231731.aspx
Similar issue docemented here
If you face any issue below manual method for removing SQL server will be helpful
1. Uninstall the existing SQL Server 2012 and all the components from the control panel.
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer.
7. Reboot the machine.
Revert if you face any issue.
EDIT: IMP POINT installation of SQL server 2012 Enterprise edition On win 8.1 ( client OS machine) is not supported by MS.But it will not stop you from installation
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Error during unattended install of SQL 2012 (..setting 'CLTRESULTDIR' does not exist.)
Hi ALl,
I'm trying an automated install of SQL 2012 on WIndows 2012, but I keep running into this error (using a configuration.ini file generated by running through setup and grabbing it just before I clicked 'OK')
Contents of summary log:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068578304
Exit facility code: 1204
Exit error code: 0
Exit message: The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not
exist.
Start time: 2015-01-09 10:19:12
End time: 2015-01-09 10:20:07
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Replication: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for FullText: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for DQ: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for AS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for RS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for RS_SHP: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for RS_SHPWFE: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for DQC: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for IS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Conn: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Adv_SSMS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SDK: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for BC: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for DREPLAY_CTLR: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for DREPLAY_CLT: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for BIDS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SSMS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SNAC: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SNAC_SDK: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Writer: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for BOL: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Browser: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Machine Properties:
Machine name: IDCSQLTST11
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: E:\SQL_Server_2012_StandardEdition\x64\setup\
Installation edition: Standard
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: DOMAINAA\SQLADMINS
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: E:\SQL_Server_2012_StandardEdition\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: DOMAINAA\user12345
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS,
DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: true
QUIETSIMPLE: false
ROLE:
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DOMAINAA\SQLADMINS
SQLTEMPDBDIR: F:\TempDB
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: E:\SQLData
SQLUSERDBLOGDIR: D:\SQLLog
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150109_101753\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Reporting Services - SharePoint
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Reporting Services Add-in for SharePoint Products
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Data Quality Client
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Distributed Replay Controller
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Distributed Replay Client
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Client Connectivity
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Writer
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Documentation Components
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Browser
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150109_101753\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
Message:
The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not exist.
HResult : 0x84b40000
FacilityCode : 1204 (4b4)
ErrorCode : 0 (0000)
Data:
SQL.Setup.FailureCategory = InputSettingValidationFailure
DisableWatson = true
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
Inner exception type: Microsoft.SqlServer.Configuration.DistributedReplayExtension.DirectoryNotExistException
Message:
The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not exist.
HResult : 0x87d00006
FacilityCode : 2000 (7d0)
ErrorCode : 6 (0006)
Data:
DirectoryPath = C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir
SettingName = CLTRESULTDIR
WatsonData =
Microsoft.SqlServer.Configuration.DistributedReplayExtension.DirectoryNotExistException@6Hello,
Open the configuration file with notepad, then go to the “features” variable. On the following article you will find what
means each parameter:
http://msdn.microsoft.com/en-us/library/ms144259(v=sql.110).aspx#Feature
You will also find the list of features supported by each edition on the following article:
http://msdn.microsoft.com/en-us/library/Cc645993(v=sql.110).aspx
For example, it seems you have DQ and DQC on that configuration file, please remove them with their corresponding commas.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thanks Albert that worked when I just selected the main features and excluded ones like DQ and DRC. Thing is why would the standard media allow you to install enterprise features, create a configuration file with these enterprise features and then fail?? Why
would Microsoft tease you like that? Frustrating since I spent hours on this .. -
SQL 2012 enterprise service pack 2 fails to install
Hi,
I have installed SQL 2012 sp2 x64 onto the main service manager 2012 database, but it fails on the datawarehouse SQL server. Both are going from SP1 to SP2. Servers are running windows server 2012 sp1 x64.
On the datawarehouse server it gets so far and then just displays a message of completed, with all the other fields blank.
The text file for the Summary of the installation has been copied below:
Overall summary:
Final result: The patch installer has failed to update the following instance: MSSQLSERVER. To determine the reason for failure, review the log files.
Exit code (Decimal): -2068709375
Start time: 2015-01-09 13:55:32
End time: 2015-01-09 14:04:09
Requested action: Patch
Instance MSSQLSERVER overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
Exit code (Decimal): -2068709375
Exit facility code: 1202
Exit error code: 1
Exit message: The NT service 'MSSQLServerOLAPService' could not be stopped.
Start time: 2015-01-09 14:00:18
End time: 2015-01-09 14:04:01
Requested action: Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0xAC454CB1%400xF762992B%401202%401&EvtType=0xAC454CB1%400xF762992B%401202%401
Machine Properties:
Machine name: SCSDWM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United Kingdom
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services
1033 Enterprise Edition 11.1.3153.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services
1033 Enterprise Edition 11.1.3130.0 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native
1033 Enterprise Edition 11.1.3153.0 No Yes
SQL Server 2012
Management Tools - Basic 1033 Enterprise Edition 11.1.3153.0
No Yes
SQL Server 2012
Management Tools - Complete 1033 Enterprise Edition 11.1.3130.0
No Yes
SQL Server 2012
SQL Server Data Tools - Business Intelligence for Visual Studio 2012 1033
11.1.3402.0 No Yes
SQL Server 2012
Integration Services 1033 Enterprise Edition
11.1.3153.0 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 2
KBArticle: KB2958429
KBArticleHyperlink:
http://support.microsoft.com/?kbid=2958429
PatchType: SP
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 11.2.5058.0
ProductVersion: 11.0.2100.60
GDRReservedRange: 11.0.5300.0:11.0.5499.0
PackageName: SQLServer2012-KB2958429-x64.exe
Installation location: c:\ce370c3d01e3ec4095540d8578cc7e\x64\setup\
Updated product edition:
Instance Edition
MSSQLSERVER Enterprise
User Input Settings:
ACTION: Patch
ALLINSTANCES: false
CLUSTERPASSIVE: false
CONFIGURATIONFILE:
ENU: false
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTANCEID: <empty>
INSTANCENAME: <empty>
QUIET: false
QUIETSIMPLE: false
SQMREPORTING: false
UIMODE: Normal
X86: false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150109_135509\SystemConfigurationCheck_Report.htm
Any ideas on why this has happened and how to fix the error?
Thanks.
JazHello,
Open the errorlog file on the following path C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log. There
you will find a more descriptive error.
I received that error before. The workaround I used is contained on the following article:
http://www.sqlcoffee.com/Troubleshooting112.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL 2012 SP1 fails to complete, Repair Install fails
Somewhere, SQL 2012 stopped running. This is developer copy. I believe also that SP1 was trying to install and found that SQL Engine was not running. In attempts to repair, I use the DVD and the repair process. But that stalls/dies
because SP1 is still not completed in install. Deadlock. I was attempting to repair, restore Master but cannt get pass the SP install hang. Any thoughts on how to stop SP1 install, avoid hang and use DVD repair install?Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068578303
Exit facility code: 1204
Exit error code: 1
Exit message: The specified value for setting 'MEDIALAYOUT' is invalid. The expected values are: None Core Advanced
Full
Start time: 2013-12-19 10:28:33
End time: 2013-12-19 10:28:57
Requested action: None
Machine Properties:
Machine name: S129
Machine processor count: 2
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition:
User Input Settings:
ACTION: None
CONFIGURATIONFILE:
ENU: true
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
QUIET: false
QUIETSIMPLE: false
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131219_102831\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
Message:
The specified value for setting 'MEDIALAYOUT' is invalid. The expected values are:
None
Core
Advanced
Full
HResult : 0x84b40001
FacilityCode : 1204 (4b4)
ErrorCode : 1 (0001)
Data:
SQL.Setup.FailureCategory = InputSettingValidationFailure
DisableWatson = true
HelpLink.EvtType =
0x28498E8E@0x2841E06E@1204@1
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.SaveInputSettingValueToObjectEnum(Setting setting, InputSettingSource source, String[] stringValues)
at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.SaveParsedArgumentsIntoSettings(InputSettingSource source, Dictionary`2 parsedArguments, Boolean chainerSetting, Boolean ignoreSettingsForNotAllowedScnearios)
at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.ProcessCommandLineArguments(String[] commandLineArguments, Boolean chainerSetting)
at Microsoft.SqlServer.Configuration.BootstrapExtension.ProcessChainerCommandLineArgumentsAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context) -
SQL 2012 Enterprise SP1 installation for SCCM 2012 R2
I am just starting to install SQL 2012 with SP1 Enterprise for SCCM 2012 R2.
Does anyone have a step by step guide for this install please
I am planning to install SQL 2012 with SP1 Enterprise as a physical install which I intend to geo cluster later on
Also I am thinking of installing WSUS on a separate server and get my SCCM 2012 servers (1 primary and 3 secondary) to use this server - would appreciate some help on how this can be setup as wellThat doesn't make sense to me. Both versions are fully supported on virtual and physical platforms.
Also, I'm with Garth - local SQL all the way.
Here are my thoughts on the subject
http://www.gerryhampsoncm.blogspot.ie/2013/10/configmgr-sql-some-tips.html
ConfigMgr is not a real-time product like Exchange, for example. A certain amount of downtime can be tolerated. I would spend more time implementing a robust backup solution, rather than trying to implement high availability.
You should be able to recover a ConfigMgr site from SQL backup in a couple of hours.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?
Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session EndedHi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li -
Reporting Services install on SQL 2012 SP1 instance blank
Sorry for the duplicate . . . didn't think the first on posted due to VDI locking up.
I have looked at all the links and tried the suggestions and I am still having the problem:
SCCM 2012 R2 SQL 2012 SP1 SSRS installed and configured (separate boxes)
When I try to add the reporting services role, it finds the SCCM database and verifies connectivity to it, the SSRS instance drop down is blank.
Using a domain service accout with local admin rights on both machines and sa rights in SQL.
There is a firewall between the Primary Server and the SQL Server and ports 80, 135, 443, 445, 1433 and the high RPC range.
Does anyone know how it is determining the instance? I have read it is via WMI but I am not sure if it is a query or executing a method. I have verified the svc acct has the correct DCOM privs.Hi,
How are things going? Please let us know if there is any progress.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi all,
I am need to do an Edition Upgrade on a SQL Server 2012 Enterprise (evaluation) to a licensed version of the Enterprise version. We do already have set-up Always on Availability Groups, however when I want to perform the Edition Upgrade I receive the following
warning:
The AlwaysOn Availability Groups feature is enabled on this instance of SQL Server and it is not supported in the edition being changed to. Before proceeding, disable AlwaysOn Availability Groups on the server instance. For more information, see SQL Server
Books Online.
I am using the correct media, as well if I need to accept the license terms I can see it's the Enterprise Core edition, so I am wondering why I receive this message. And of course I did not proceed, because I do not want to loose my availability groups.Hi Hans,
Personally, according to the
features supported by the editions of SQL Server 2012, it is support on AlwaysOn Availability Groups feature on the Enterprise version. In theory, the AlwaysOn Availability Groups feature is supported on the Enterprise version after upgrading.
About this warning, if it is in test environment, we can do a test and check if the warning will effect AlwaysOn Availability Groups feature. Or
I recommend to submit it to the Microsoft Connect at this link
https://connect.microsoft.com/SQLServer/Feedback. So that a dedicated Support Professional can assist
you in a more efficient manner.
Thanks for your understanding.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hi,
I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
setup rolls the SCOM install back.
Has anyone seen this issue before or know how to help resolve it?
Appreciate your help, below is the SCOM installation log:
Thanks
Marc
[13:27:27]: Always: :Creating Database: OperationsManagerDW
[13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
[14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :Exception running sql string
DECLARE @sql NVARCHAR(MAX);
SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion
of the operation or the server is not responding.
[14:55:33]: Always: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
[14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Always: :InnerException.StackTrace:
[14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or
the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
[14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
marc nalderHi,
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
CLR fce in MS SQL 2012 DirectoryServicesPermission failed
Hello,
I did this all and result isnt good :-)
When I try to call the function dbo.fn_jk_ver_email(@param) the error occurs:
// SQL settings
USE master
GO
CREATE ASYMMETRIC KEY DirectoryServices_Key
FROM EXECUTABLE FILE = 'C:\Windows\Microsoft.NET\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll';
CREATE LOGIN DirectoryServices_Login
FROM ASYMMETRIC KEY DirectoryServices_Key;
GRANT EXTERNAL ACCESS ASSEMBLY TO DirectoryServices_Login;
GRANT UNSAFE ASSEMBLY TO DirectoryServices_Login;
GO
USE CRMMAFRA_TEST_23032014
GO
CREATE ASSEMBLY DirectoryServices FROM 'C:\Windows\Microsoft.NET\Framework64\v4.0.30319\System.DirectoryServices.dll' --na serveru
WITH PERMISSION_SET = UNSAFE;
GO
-- Create My_CLR_function in SQL
USE CRMMAFRA_TEST_23032014
GO
CREATE FUNCTION [dbo].[fn_jk_ver_email]( @adresa nvarchar(100))
RETURNS int
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME LDAP_CLR.UserDefinedFunctions.jk_ver_email;
GO
//CLR fce deployed into SQL
using System;
using System.Data;
using System.DirectoryServices.AccountManagement;
using System.DirectoryServices;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
public partial class UserDefinedFunctions
[Microsoft.SqlServer.Server.SqlFunction]
public static SqlInt32 jk_ver_email(string emailadresamoje)
int vysledek = 0;
int firstCharacter = emailadresamoje.IndexOf("@") + 1;
string domena = emailadresamoje.Substring(firstCharacter);
string ldapstr = "LDAP://" + domena;
emailadresamoje = emailadresamoje.ToLower();
using (DirectoryEntry entry = new DirectoryEntry(ldapstr))
DirectorySearcher dSearch = new DirectorySearcher(entry);
dSearch.Filter = "(objectClass=user)";
foreach (SearchResult sResultSet in dSearch.FindAll())
if (sResultSet.Properties["mail"].Count > 0)
//if (String.ReferenceEquals(sResultSet.Properties["mail"][0].ToString(), emailadresamoje))
bool result = Equals(sResultSet.Properties["mail"][0].ToString().ToLower(), emailadresamoje);
if (result)
vysledek = 1;
return new SqlInt32(vysledek);
Msg 6522, Level 16, State 2, Line 1
A .NET Framework error occurred during execution of user-defined routine or aggregate "fn_jk_ver_email":
System.Security.SecurityException: Request for the permission of type 'System.DirectoryServices.DirectoryServicesPermission, System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' failed.
System.Security.SecurityException:
at UserDefinedFunctions.jk_ver_email(String emailadresamoje)Hi
I've fixed this finally - at least for me!
It appears that if your assembly is using an assembly that has been marked as 'unsafe' - such as the DirectoryServices one - then your own assembly must be set to 'unsafe' as well. I changed a number of things in Visual Studio to this affect and then re-published
and the error went away and it all works fine now, AD from SQL server! However, I didn't use any of the manual scripted key generation code though that you used. The only T-SQL I used in this whole project was this...
ALTER DATABASE MyDatabase SET TRUSTWORTHY ON
GO
IF NOT EXISTS (SELECT * FROM sys.assemblies WHERE [name] = 'System.DirectoryServices.AccountManagement')
BEGIN
CREATE ASSEMBLY [System.DirectoryServices.AccountManagement]
FROM 'C:\Windows\Microsoft.NET\Framework64\v4.0.30319\System.DirectoryServices.AccountManagement.dll'
WITH PERMISSION_SET = UNSAFE
END
And these are the steps to what I changed in Visual Studio...
1) First right click on the project in the solution explorer to get the project settings tabs up...
2) Under the 'Project Settings' tab click on the 'Database Settings' button, when the dialog comes up goto the 'Miscellaneous' tab and tick the 'Trustworthy' option (even if you've set the database as trustworthy in SQL server using T-SQL still do this,
wouldn't work for me until I did this as well)
3) Next under the 'SQLCLR' tab set the assembly permission level to 'UNSAFE'
4) Lastly (not sure if this is required) still under the 'SQLCLR' tab click on the 'Signing' button and create a new strong name key file, call it anything and click ok and make sure that it's now showing as the selected strong name key file. Probably a
security risk but hey. Then don't forget to click ok!
5) Save everything and rebuild, then publish to your database and test again - hopefully it works!
Good luck
Padigan -
Hello,
SSRS in SharePoint mode is driving me insane.
We are recreating a SharePoint 2013 (SP1) farm in a test environment with the following set-up:
2 SP Web FrontEnds
2 SP Application Servers
1 SQL Server
At both SP APP Servers, we installed SSRS (SQL 2012 Enterprise w/ SP1) in SP integrated mode.
We managed to start the SSRS SP service at the first SP APP Server. However when we try to start it on the second APP Server, we get the following error:
"Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot
be started on this server unless it is stopped on all other servers in the farm. "
Now I can't stress this enough: This is a SQL Server 2012 SP1 Enterprise. This is the image we got from our MSDN subscription. There is no mistake here.
Could someone please advise why SP might think this version of SSRS is not the correct one?
Thanks in advance for your help.
Regards,
P.Hello,
I'm afraid that is not it.
After a long, frustrating and strenuous investigation and troubleshooting, we found the problem.
The problem is the current ISO for SQL Server 2012 Enterprise SP1 (x64) found at MSDN. Bear in mind that we downloaded this ISO from MSDN about a month ago.
As soon as we recreated the environment using the ISO for SQL Server 2012 Enterprise SP2 (x64) found at MSDN, everything worked as expected -- and that includes running more than one SSRS in SharePoint mode.
Also bear in mind that we tried updating the SQL SP1 install with SP2 and subsequent cumulative updates but that never fixed the problem.
There is something fundamentally wrong with that ISO with SP1 slipstreamed in it that no matter the subsequent updates installed, SSRS in SharePoint mode fails to work properly on a multi-server environment. We went as far as SP2 with CU3 and nothing seemed
to fix the problem. And yes, we also performed manual updates to the SSRS and PowerPivot SharePoint MSI add-ins.
I am shocked and distraught to find out that I lost hours of work due to a dodgy ISO image.
Regards,
P. -
Trying to install SQL 2012 Std on Win 8.1Pro - Fails right away with no log
When trying to install MSDN SQL 2012 Std 64 or x86 on Windows Pro 8.1, i get an error immediately with no information posted to the summary log. Screen shot of error. Just Modal dialog with "SQL Server Setup" and a Big red X in it.
Any help would be appreciated.
-jeffHello,
Please enable .NET Framework 3.5 using Control Panel -> Programs and Features. If you have it already enabled, please repair it using
the following tool:
http://www.microsoft.com/en-us/download/details.aspx?id=30135
Open the Command Prompt as Administrator and run the following command:
winmgmt /verifyrepository
The result of the command should be “WMI Repository is consistent”.
SQL Server cannot be installed on a compressed or encrypted drive.
You need to run SQL Server setup with a Windows account with administrative privileges.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Install of SCSM 2012 SP1 DataWarehouse Fails with PreRegisterExtensionsDeferred
Hi,
Trying to install System Center Service Manager 2012 SP1 DataWarehouse on Server 2012 and it's failing on Configuring Reporting with "An error occurred while executing a custom action:_PreRegisterExtensionsDeferred".
Looking in the logfile SCSMInstall01 we get these lines:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions
PreRegisterExtensions: Begin
PreRegisterExtensions: Starting in deferred mode
PreRegisterExtensions: 20 extension records decoded
PreRegisterExtensions: Connecting via InProc SDK
PreRegisterExtensions: Loading management pack C:\Program Files\Microsoft System Center 2012\Service Manager\System.Library.mp
PreRegisterExtensions: Importing management pack C:\Program Files\Microsoft System Center 2012\Service Manager\System.Library.mp
PreRegisterExtensions: System.ArgumentException: The requested management pack is not valid. See inner exception for details.
PreRegisterExtensions: Parameter name: managementPack ---> : Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: XML parsing: line 9590, character 93, end tag does not match start tag
PreRegisterExtensions:
PreRegisterExtensions: --- End of inner exception stack trace ---
PreRegisterExtensions: at Microsoft.EnterpriseManagement.ManagementPackManagement.TryImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions: at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions: at Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions(Session session)
PreRegisterExtensions: End (fail)
Databases being installed on SQL 2012 (11.0.3128).
Any pointers to where I'm going wrong?
Thanks,
Niall.Did some searching about this error. Some people say it's because SQL permission issue. Does the service account you are using have permission to the SCSM database-server and on the database-server where you are placeing the data warehouse (unless you are
placeing it on the same server)
Have a look at this post: https://social.technet.microsoft.com/Forums/systemcenter/en-US/63518cc4-089e-4d70-8bb1-a6e305c3db84/an-error-occurred-while-executing-a-custom-actionpreregisterextensionsdeferred?forum=systemcenterservicemanager
www.zgc.se - Sysadmin blog.
Maybe you are looking for
-
Parameters / Variables in SQL Loader Control File
Here's my problem, I have created SQL Loader control file (ctl) to load a file of employees. This loader program is registered in Oracle Applications. What I want is to pass a parameter derived from the profile like the user name of the one who execu
-
hi, i just moved to tampa and want to switch my number to this area code, so im going be getting a new at&t sim card.. how can i transfer all my numbers over to the new sim card? is there to a way to save the numbers to the phone?
-
Evrything seem to be working,BUT CAN'T MAKE DEEZER WORK,
im trying to use Deezer but does not work,everything else seem to be working,i have downloaded Opera Deezer works but i don't like opera and i would like to make it work with Firefox so it must be a question of seeting Thank you Gerard
-
I have noticed that after booting now Apps (Safari, Pages etc) seem to take forever (20-30 Sec) to start up -Just a pretty icon bouncing on my tray. Validating disk permissions checked the disk etc. but nothing helps. Running the following config: O
-
Internal iWeb page Links Inactive?
I just spent hours upon hours working on my new iWeb website. Now that I have published all of my changes none of the internal links on the top navigation are working. I have no idea why. I have spent an additional hour looking for a way to fix this