Slow speed using written

I have a WRT160n ver 3. My computer is vista 64. I am using it wirelessly. I have been chatting with lincksys but so far no help. I was in New York CIty before this and using Time Warner for Cable modem. I think I had the same issue and when I called for support they adjusted the setting and it became very fast, download speeds in the 20's. I moved to Florida and now have comcast. I should be getting signals of 16 for downloads but when I use explorer I am lucky to get 10, if I use AOL it goes down to 6 which is a joke. I have the latest firmware loaded as I just did this with tech support but still no help. We switched the channel to 11 but all that did was make the connection keep falling out, so I have moved it back to 6. What can I do? Comcast says they are giving me the signal at the speed as promised and it is something wrong with the router.

I had my broadband provider here today to check everything for me. Seems that the issue is caused by which browser I am using. I normally use AOL and that is bar far the slowest. If we connected the modem directly to the computer I was getting the slowest speeds. If we then went through the router it slowed just a bit more. These speeds were half of what they were doing the same test with Firefox. Comcast confirmed that I was really getting signals in the 20's out of the modem hardwired. If I then went through the router they slowed just a bit but they were still strong. If we then tried through AOL then it was less then half. I didn't have this problem in New York City or I didn't notice it as much. I guess I just do not know enough about all this to be able to figure out how to fix this problem. I have not changed anything since I lived in New York and it seems that the speeds were the same but I didn't have as big of a drop off with AOL. If anyone knows what I could do or where I could look for help I would really like the help. I could pay more money and increase the speed but I just don't see the sense in that and it is very expensive. I guess I just have to use my AOL through firefox. It is a bit more of a pain but what else can I do?

Similar Messages

Slow Speeds using WRT54gs Router on Comcast

I have Very Slow speed the longer I use my Internet on Comcast, My system is Wired using Comcast Modem and Linksys WRT54GS Ver. 7.0. I also have A Xbox concected to to this network with one other PC on wireless. Please Help no one can tell me way

I have a similiar problem. The wired desktop has intermitten slow spots. I am not sure if this is due to a software firewall issue or what. Never had the problem before installing the router so I know it has something to do with the router.

Slow speeds using airport express 1st generation

I am currently using an airport express 802.11n 1st generation. I have a direct link from my modem to the airport express which provides a wireless connection to 4 other devices, my macbook pro (2009), iphone 5, android phone, and a windows computer.
I have been seeing very variable download speeds when using speedtest.net on both my macbook and iphone. I had just assumed it was my internet provider. However, I tried connecting my macbook directly to my modem using an ethernet cable instead of through the airport express. When I did that I had the full 50 Mb/sec download speed that I am paying for. When I then reconnect the airport express and measure the download speeds through wifi and with all 4 devices connected, I see much slower speeds, anywhere from 4 Mb/sec to 30 Mb/sec, but never the full 50 Mb/sec.
It seems that when my download speeds are really slow and I reset the airport express by just unplugging it and then plugging it back in, the speeds generally seem to improve, but again they usually average around 15 Mb/sec.
Another thing, it seems like the download speeds improve if only 2 devices are connected and not all 4. Yet, this seems unlikely, I would expect that the airport express could handle more than 4 devices!
When I connect with airport utility, the airport express has the latest firmware. I can't think of much else that would cause these slow speeds.
Any help would greatly be appreciated!
Thanks.

It is very possible that you may have some form of Wi-Fi interference that appears during these hours that is preventing your 802.11n AirPort Express Base Station (AXn) from providing a clean RF signal.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

Is anyone having issues with slow speeds using safari 8.0

my requests to some sites are left hanging and I have checked my internet speeds.

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Open the iCloud preference pane and uncheck the box marked Photos, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

I am learning Italian using CD in iTunes. Is it possible to play a track at a slower speed so that I can catch what is being said?

I am learning Italian using a CD in iTunes. Is it possible to play a track at a slower speed to hear better what is being said?

Right, I understand those fundamentals. We outsource a lot of out view creation and do not have permission to create views for Business reasons; these are beyond my control. However, I can see the source code to many Views. We have also
been told that we should not use tables in our queries. Therefore, I need to use existing Views. Specifically, I would like to add an additional value to an IN() constraint. This would change the constraint as showed below:
IN('A', 'B', 'C') ---> IN('A',
'B', 'C', 'L')
I am wondering if this change can be made when the view runs and only for this one report, with the change being made from the report. This would be very easy if the constraint was removing a value. Obviously I could change the constraint from
IN('A', 'B', 'C') to IN('A','B') very easily with out modifying the View. This would be done by writing a query against the view and in the WHERE clause adding the new IN('A', 'B') statement. However, I want to do the opposite and add a value...

Extremely slow downstream speed using ethernet

I have a G5 Dual 2.3. I started to notice that my downstream speed seemed to be slow. So I went to speakeasy.net to do a downstream rate test. Much to my amazement my downstream speed is 400-500kbps! It's normally 6000kbs since I have a cable modem.
I tried bypassing my router by plugging the cable modem directly into the ethernet port on my G5 and still had the slow speeds. For kicks I tried pluggint the cable modem directly into my G4 Powerbook and the downloads were now at 6100kbps!! ***!!
I then decided to try sharing the ethernet connection (with the cable modem plugged directly into it) from my Powerbook over my airport network using the powerbooks airport antenna. I then connected my G5 to my G4's shared internet connection and lo and behold, 6000+ kbps!! It seems like there is an issue by the ethernet connection on my G5. Anyone heard of anything like this?
Any suggestions as to what to do?
Thanks,
John
PowerMac G5 Dual 2.3 Mac OS X (10.4.4) 4.5 Gb RAM

This sounds like duplex mismatching. Try going into your network preferences and force the NIC to 100/FD and see if your speed is the same. What router are you using?

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.
The above is what the bar says. It's been a while and wondered, maybe Apple changed the format for forums. Then got this nice big blank canvas to air my concerns. Went to school for Computer Science, BSEE, even worked at Analog Devices in Newton Massachusetts, where they make something for apple.
The bottom line is fast CPU = more FPU = more headroom and still can't figure out why the more cores= the slower it gets unless it's to get us in to a 6 core then come out with faster cores down the road or a newer Mac that uses the GPU. Also. Few. I'm the guy who said a few years ago Mac has an FCP that looks like iMovie on Steroids. Having said that I called the campus one day to ask them something and while I used to work for Apple, I think she thought I still did as she asked me, "HOW ARE THE 32 CORES/1DYE COMING ALONG? Not wanting to embarrass her I said fine, fine and then hung up. Makes the most sense as I never quite got the 2,6,12 cores when for years everything from memory to CPU's have been, in sets of 2 to the 2nd power. 2,4,8,16,32,64,120,256,512, 1024, 2048,4196,8192, 72,768. Wow. W-O-W and will be using whatever I get with Apollo Quad.
Peace to all and hope someone can point us in THE RIGHT DIRECTION. THANK YOU

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

Slow speeds. Apparently I don't have a bt broadban...

After using bt's own e-form to email them about my long running loss of speed over the year from 2.6mb for the last say 10 years, to 1.6mb (1.4mb at its lowest) download / 0.36 up. ping latency around 0.38 i think, apart from today where its 42.25!! what's that?!
All I've got back so far is:
"Recently you requested personal assistance from our on-line support centre. Below is a summary of your request and our response.
If this issue is not resolved to your satisfaction, you may reopen it within the next 14 days.
Thank you for allowing us to be of service to you. " ....and....
"This is in regards to the e-mail you have send on 20th August 2014. We are sorry to inform you that there is no sufficient information in the e-mail to pull up any active broadband account. We would request you to provide the details of your broadband account so that we can pull up the account and help you further."
Just to be clear, their OWN e-form didn't have enough information for them to find my account??? It asks for my name, address, phone number my broadband is on, email address, my account number (assume its the BT account as that's all I have), plus the problem. What else can I type in if there's no other fields.
So I submitted the form. A couple of days later I got an email back with the above included in it.
1. Why automatically close the call? They hadn't resolved anything, so why close it? The only other thing they mentioned was going onto their Help pages (durr how did i manage to use their e-form in the first place?).
2. No mention of what these missing "details" are. (On purpose?)
So I replied and being a little annoyed at their poor response, which just sounds like "yep dealt with that call within the response time target I got to make".
I've had BT broadband since its inception, even before, but they cannot find my account? Amazing they can bill me each quarter without any problems. So I sent my bt account number again even thought it was included in the e-form. Asked them clearly to tell me what "details" of my broadband account they need from me. More than happy to oblige. Oh, and no I'm not satisfied with their resolution and re-open the call!!
So some more days have now passed and guess what. I get an email with the exact same text!!
I replied. In CAPITAL LETTERS for the hard of hearing. What specific details do you want from me?
I wait in baited breath.
OMG I haven't even got onto the problem of the slow speed issue yet!
I guess they want me to phone (premium 0800 number?), or do something myself. I don't want to phone them as I've experienced the same ol' routine before, life's too short. I've paid the top price for ever, so I would think they could do some of the leg work eh? I mean part of the cost is the support they provide, right? How do you lose a broadband account?
It niggles me is that I pay same price infinity customers do and I'm still stuck in the dial-up speed ages. And don't get me on about those tv ads. Like everyone can get infinity. Yeah I'm still waiting after 5 years that it was coming. Amazing the Isles of Scilly with about 10 people living on there manage to get it quicker than me living in a town in the middle of the UK. I digress...
If I can do a speed test from both their bt.com site and btwholesale speed test and get a poor speed (approx 1.8 max) from exchange to router then I know by the time it gets to my pc its not going to be 2.6 is it.
PS i don't have a master socket/test socket to try. its the old type. And why has the speed just dropped and kept down (like for so many others in this forum), where nothing has changed, at least at the customers end of the line.
I don't expect someone in the forum to come up with the solution, but its more of a rant on my part at the poor response to my request, let alone some kind of investigation into the problem itself.
I work in "IT" and part of it is dealing with calls from customers. If I had dealt with a call like BT had then I'd be getting a ear bashing from my manager.
Solved!
Go to Solution.

if you want help about your conenction speed from the forum members then can you post the adsl stats from your router please.
can you try quiet line test dial 17070 option 2 should be quiet nohiss/crackle and best with corded phone if cordless then dull hum normal
can you enter your phone number and post results remember to delete number https://www.btwholesale.com/includes/adsl/main.html
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Multiple devices on WiFi...slow speed

In our household, we have 2 iPads, 2 iPhones, a Mac Pro laptop, Apple TV and a primary machine that is connected to the Internet via an AT&T modem and distributes the WiFi signal throughout via an older style Airport Express (the flat, round-edged square thing rated at 802.11ac wireless) that replaced the triangular round spaceship model (rated at 802.11abgn). And after years of going back and forth with AT&T complaining about near dial-up speed (while paying for the maximum tiered speed level), I'm at my wit's end. Sometimes I get absolutely NO signal at all.
When I check my speeds using Speedtest, it fluctuates from 1.32 MBps Download Speed (on rare occasion) and 0.32 Mbps Upload, to 0.29 DL and 0.24 UL (more the average). I've had no less than 8 AT&T techs out and they've all checked the wiring, the connections, and nothing. One was honest enough to tell me that I was paying for the top tier pricing for speeds for nothing because it's impossible due to the distance and route the lines come to my house from the main station.
So I'm thinking of buying the latest Airport Express Base Station which promises 3x's faster transmission BUT (I was told), if I have any device that uses the slower protocol, it sticks to that.
Another idea I had is to wire up two leads from the telephone box—one that goes to the primary computer (that has the modem and base station), and another line on the other side of the house that will have my old base station. We can simply connect via Ethernet into that.
One last thing...I have an old, 1912 house that has lathe and plaster walls that I've heard reduces WiFi signals substantially. Let me know if I'm WAY off the mark.
Thanks for listening.

OK folks, here's the scoop...
I tried configuring the devices as directed, but I could not find the same interface as shown in your provided screen shots.
But here's something weird...
Since my initial post, I purchased some music instructional materials and tutorials that included some PDFs as well as some Mp3s totalling about 46MBs. The seller had me go to a 3rd-party e-commerce site he uses after I paid through Paypal, etc. It's all legit. He's a well-known YouTube-based instructor.
So I begin the download process after receving a direct download link and at about the 2.8 - 3MB mark the transmission goes dead in the download process. I tried to download several times, and even switched browsers (from Firefox to Safari) and both hung up and froze at the same point. Unfortunately, this e-commerce site does not allow more than 5 download attempts — so after the 5th time, I was screwed.
I then email the instructor telling him about never actually getting the files, so he sends me everything via email instead.
I open his emails and 46MBs worth of files download in less than 15 seconds!
I have no idea why the browsers are hanging. I've tried flushing the caches, restarting, etc., but I'm still getting the same hangup/freeze issues, yet emails come through at lightning speed.
Any clues as to why this would be?
Just to reiterate...I'm using an iMac running 10.6.8, 2.8 GHz Intel Core with 4GB SDRAM and I have the OS Firewall set to Off.

Slow speeds, almost dead, can't figure out what's ...

Hi all, I've had very slow speeds from my homehub for almost a week. I've tried a factory reset on the hub to no avail. I also spoke to technical support in India I think, but they were no help.
When I perform a speed check the speed from the exchange to my house is fine, it's after that it dies a death.
I've checked all cables and it is not cabling after the hub as this problem effects internet tv's that are connected via ethernet cable and others that are wireless and also tablets that work on wifi.
In the last week I have had download speeds as low as 0.03 and for only a few hours last Monday has it been OK all of a sudden. I presumed a fix elsewhere but the problem came back an hour or two later.
At the moment we can't use iplayer, youtube and every webpage takes ages to load. It's quite horrible.
Has anyone got any idea's what could be wrong and are there any diagnostic tests I can run on the hub to see if it's borked.

Hi Welcome to the community forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Slow speed/high SNR margin after upgrade to ADSL2+...

I have an issue with slow speed that I am suspecting is caused by a high SNR margin (about 12dB) which has come about (I believe) due to the fact that my router was repeatedly reset during the first few days of the upgraded service. The exchange was upgraded to ADSL2+ on 3rd January.
I have a US Robotics 9108 which has worked fine for nearly six years. I was getting around 8Mbps before the upgrade which isn't far off the theoretical maximum.
There was a problem with my router and I only found it to be my router at fault over the last few days. Upgrading its firmware has cured the problem which was that requests weren't being fulfilled once connection had been established, (seemingly particularly when this was ADSL2+ or ADSL2 mode). Consequently, I reset my router in these instances and I believe that this will have been interpretted by the exchange as being due to line noise. In general, I disabled ADSL2 and 2+ modes on my router to force it back to G.DMT and it usually worked fine (albeit slow sync rate relative to that I had before 3rd January).
During fault conditions, the connection synced OK. I recently borrowed a router and tried it and it immediately connected faster than mine had done previously and I could access the web without issue. This confirmed that my US Robotics was at fault, and after downloading its latest firmware, it fixed the problem.
There is no bell wire as there are no hard wired extensions from the master socket. I use a single filter which plugs directly into the master socket (i.e. no extension lead to the filter).
I was using a BT filter (MF50) I got in 2004 when I first got broadband. This came with a Voyager 100 modem and is a rebranded YCL one. I have since replaced this with a Z350-UK which I have borrowed. The US Robotics didn't come with any filters.
With the BT filter, caller display does not work at all when the router is connected in ADSL2 mode. In G.DMT mode the problem with caller display was intermittent. The Z350-UK has rectified the problem with caller display not working when in ADSL2 mode. I have ordered a Pressac Interstitial VDSL Faceplate as a perminant solution.
Do I need to contact the support helpline to get this fixed? Or will the SNR margin drop over time? As I say, I got around 8Mbps before the upgrade.
I am presently connected in 2+ mode and stats are:
SNR margin (dB):
12.8
5.4
Attenuation (dB):
34.0
12.0
Output power (dBm):
0.0
12.8
Attainable rate (Kbps):
8984
1144
Rate (Kbps):
6495
1144
I have just run the BT Speed Test and the results are:
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
5282 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 5282 Kbps
For your connection, the acceptable range of speeds is 2000-7150 Kbps.
Additional Information:
Your DSL Connection Rate :6495 Kbps(DOWN-STREAM), 1144 Kbps(UP-STREAM)
IP Profile for your line is - 5730 Kbps
2. Upstream Test: -provides background information.
Upload Speed
938 Kbps
0 Kbps
1144 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 938 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1144 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

once you have maintained 3 days + stable connection then you can contact the forum mods on this link and request a noise margin reset http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 72 hours
you do not need to contact the helpline
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Extremely slow speeds on Windows Computers with 5th Generation AirPort Extreme

I just got a new refurbished AirPort Extreme 5th generation. Everything works great for all of my OS X devices and iOS Devices. I am getting my ISPs speeds when doing tests. The issue is when I am using Windows devices. My roommate has a desktop and a netbook and both are getting extremely slow speeds. Speeds like .07Mbps down. Does anyone have any idea what the issue might be?

You have no large file?? Really.. in the whole computer there is not a windows update file.. a backup file... a movie download file.. nothing.. ??
Anyway that is irrelevant.. the issue is wireless.
Download the latest drivers from the wireless manufacturer.
You will need to find out what wireless card is used and locate the correct download for that model.
On the Airport it is well worth doing the following tests.
1. Change the name to SMB standard.. short no spaces pure alphanumeric.
So if your wireless name is Fred Blog's Airport Extreme wireless
Plesae change it to AEwifi
2. Take off all security for a test.
3. Set channels.. I am guessing the computers are only using 2.4ghz, so set 11,6, 1 in that order.
No improvement.. just put the security back to WPA2 Personal with pure alphanumeric password..
Try and test new drivers and use no firewalls on the computer.. ensure that the computer is correctly set for home network.
Beyond that it is just incompatible.

Broadband slow speed,ongoing since end of april

Hi,i have been suffering slow speeds and dropping out since end of april,i have had 9 engineers out,but still no wiser.
I use a desk top and laptop and have problems on both,running at 8 meg,cant open web pages,or do internet shopping,engineer blames the websites.
i am a 2 min walk from the exchange,
if i take my laptop to my sisters 4 miles away it works fine,and shes only on 2 meg.
I had an it consultant round who did a ping test from laptop to router,and router to exchange,laptop to router was fine,but the router to exchange keeps timing out 19 times in 5 mins,where as my sisters did it once in 40 mins.
i have opened a little square bt box from my socket box to the wiring outside,wiring looks in poor condition with wires not actually connected to anything,engineers say that wouldnt affect it,

Hi Efcpaul
I can take a look at this for you.
Send an email to [email protected] with your BT account number, telephone number and a link to this thread.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

MacBook Pro(Early 2011) extremely slow speed on Yosemite(10.10.2)

Hi All,
I installed and then reinstalled a fresh Yosemite But now i am experiencing issues like very slow speed of the OS & fan continuously ON. Mavericks was working fine.
this is my ertecheck report
EtreCheck version: 2.1.8 (121)
Report generated 1 April 2015 12:03:11 am IST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.7 GHz Intel Core i7 CPU: 2-core
    10 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Replace Soon - Cycle count 1329
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 4:1:57
Disk Information: ℹ️
    Hitachi HTS545050B9A302 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        MacHDD_2 (disk0s4) /Volumes/MacHDD_2 : 349.63 GB (118.65 GB free)
        MacHDD_1 (disk1) / : 149.11 GB (104.40 GB free)
            Core Storage: disk0s2 149.48 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Daemons: ℹ️
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        MacHDD_1: Disk size: 149.11 GB Disk used: 44.71 GB
    Destinations:
        MacHDD_2 [Local]
        Total size: 349.63 GB
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Adequate
            Backup size 349.63 GB > (Disk used 44.71 GB X 3)
Top Processes by CPU: ℹ️
        26%    Microsoft Outlook
        12%    coreaudiod
         6%    Google Chrome
         3%    WindowServer
         1%    launchservicesd
Top Processes by Memory: ℹ️
    215 MB    mds_stores
    193 MB    Google Chrome
    183 MB    Google Chrome Helper
    129 MB    iTunes
    107 MB    Microsoft Outlook
Virtual Memory Information: ℹ️
    5.04 GB    Free RAM
    3.41 GB    Active RAM
    698 MB    Inactive RAM
    1.59 GB    Wired RAM
    4.71 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 07:59:25 PM    Self test - passed

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Slow Speed Tests

Hay everyone I have an AirPort extreeme located in my front room about 15 feet from my bedroom. In the bedroom I have an iMac 27" mid-2011 model. I have been running speed tests from speedtest.net and have been getting very slow download rates, any where betwee 1.4 and 5.0 mbps. I pay for a 25 mbps speed. I have full signal strength everywhere in the house the speed is just terrible. Does anyone know how I can increses the speed of that computer. I have changed the channel to one that is not used as much in my area, as I looked at iStumbler. Also if I sit in the room next to the router I get 10 - 15 mbps. Any help would be amazing. Thanks.
PS I also have an AirPort express set to extend the network in the bedroom where I am having the slow speed.

I'm not able to provide a solution though I too find that the AE is not as fast as it is supposed to be. At one time I had a Belkin Wireless and an ADSL connection that topped out at 1.5MB/sec. Now I have a 50MB/sec internet connection and honestly, I have seen an increase in my speed over wireless but the Belkin really seemed quite zippy! I play World of Warcraft and I remember someone saying to me that AE or our Macs have Firewalls set-up that we don't know about or "something" that limits the speeds of the connections - which PCs and non-Apple products do not. Constantly see when downloading new patches from WOW, messages that I am behind a firewall - when I do not have firewall set on the AE nor on my Mac...

Slow speed using written

Similar Messages

Maybe you are looking for