Slow Transfer and Downloads with new SSD and Fresh OS

I have a brand new Solid State Drive and maxed out the RAM in my Mid 2010 15 inch MacBook Pro. The new hard drive made all the difference in the world. But having never done a clean install since the start, I was having issues with some of my older applications. I decided to clear the hard drive and reinstall the OS and discs for Final Cut Studio and my Adobe products. Everything runs smoothly, but only now, when I try to copy from a external drive, whether FireWire or USB it takes exponentially longer to transfer. Same goes for downloading content from a FTP server. Basically anything that is generating new files/data onto my hard drive. This wasn't the case until I re-installed the OS (Had Mavericks before and after the install).
Any idea what this issue might be?
My hard drive is a Samsung Electronics 840 Pro Series 2.5-Inch 512 SATA Solid State Drive MZ-7PD512BW
And as I stated, it worked perfectly before.

Jay,
my thoughts were that with Trim command support disabled, when you’d reïnstalled OS X and your apps and personal files, that your SSD might have gone over 75% full, at which point SSDs’ performance start to slow down. (Without Trim command support, the SSD needs to be “told” manually to reuse space which has been freed up by deletion.) If that is the cause of your current slowdown, then you wouldn’t start noticing a difference until your SSD has run out of previously unused space; at that point, a Trim command would be run on the SSD to make available that previously used space. In the interim, I guess that you could try selecting your SSD in Disk Utility, then select the Erase tab, then press the Erase Free Space… button to see if that would work as a manual substitute for a Trim command. Alternatively, you could try creating dummy files to purposely fill up your SSD nearly to capacity, and then delete them to see if the Trim command will make available all of the space for all of the previously deleted files (i.e. not just for the deleted dummy files).

Similar Messages

On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.

On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?

Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2

I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5

I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3. I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have. I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version. What should I do

I have 6.0. Tried to download newest verion and it will not download. Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
Thanks, John
m: gener7
Sent: Thursday, December 11, 2014 6:01 PM
To: JOHN STAHLY
Subject: I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

Mountain Lion and Mavericks with new SSD

I tried Yosemite on my MBA (mid-2011) and lost my hard drive. Apple replaced it with an SSD at no charge
since my Apple Care had only recently expired. Now I need to find my 2013 tax return on my Seagate
external hard drive but cannot find it on Time Machine backups. Can you help me?
The lost hard drive was using Mountain Lion. The new SSD has Mavericks.

Well, the only place for your records would be on your backup(s). The hard drive was replaced, so there is nothing there unless Apple restored all your data from your old drive to the new one after the replacement. If they didn't, then your only hope is your backup.

Bionic to Razr, replace first Razr and sim, with new Razr and Sim. All service loss.

I would like to say that the era of smartphones has been both fun and expensive. Having computers in our pockets is an amazing breakthough in technology. I used to have both the Droid, and I also got the Droid 2 when it came out, my next purchase was the Bionic, and that's where my problems started. The 4g would drop all the time, and it wasn't much of an inconvenience because usually it would come back on if I waited a little bit. I'm patient most of the time unless I need directions somewhere and then I get a bit angry. So I researched on the web and I tried all the tips and tricks and other things you can do to see if you can fix the problem to no avail. I would check in from time to time and found out that it was a known issue, so I called up and just like I heard I could get a free replacement phone the Droid Razr which had come out directly after the Bionic. I got it in the mail and it worked for about 20 minutes before losing all service(not just the 4g), and this happened every 5 to 10 minutes for the next couple days, so I got drunk and planned on yelling at some poor verizon person, but she was so nice and offered to send me out a new phone, so I decided to be nice back. She said I should make sure to send in my Bionic so I didn't get charged, but I said how about I send in the ****** that you sent me instead and keep my original. I got the new one a couple days later, and it seemed to be ok for the first few days, maybe I was just lucky not to notice. It does the same thing as the other one, and I am about to lose my patience. I want a solution to my problem. Is there anyone out there in Verizonland that can give me a solution that doesn't involve (because I have already done all these things multiple times) resetting the phone to factory default, clearing the cache, the motorola reconnect app, power cycling the phone by holding the power and volume down keys, or as i mentioned above getting a new (used and probably sent back in because of the same problem) phone and sim card?

Same as before, the service drops to zero, has the universal no sign over the bars. The screen kicks on and it starts to build up to 4 bars, then white 4g, blue 4g, and it does that oh I would say every 10-30 minutes or so when I have had it sitting there while on my computer. If I am on Netflix watching stuff it doesn't drop, like once I have engaged the 4g and am using it I don't have problems with it. I have had a couple of calls drop, and in a text conversation it has just dropped to zero while I was typing a response. I am not sure about maps, it's usually off when I want to try to find something so I have to wait for it to kick in to give me a route, which is by far the most irritating thing in the world when you are in unfamiliar territory.

Slow Boot Times after installing new SSD and Lion

Can anyone please help interpret why I'm having slow boot times? I have copied my console printout during the boot and it seems to be doing a repetitive action while booting.
Thanks
13-01-04 2:50:24.000 AM bootlog: BOOT_TIME 1357293024 0
13-01-04 2:50:25.000 AM kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
13-01-04 2:50:25.000 AM kernel: vm_page_bootstrap: 942160 free pages and 32688 wired pages
13-01-04 2:50:25.000 AM kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
13-01-04 2:50:25.000 AM kernel: zone leak detection enabled
13-01-04 2:50:25.000 AM kernel: standard timeslicing quantum is 10000 us
13-01-04 2:50:25.000 AM kernel: mig_table_max_displ = 73
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for TMSafetyNet
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Sandbox
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Quarantine
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Quarantine policy (Quarantine)
13-01-04 2:50:25.000 AM kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
13-01-04 2:50:25.000 AM kernel: The Regents of the University of California. All rights reserved.
13-01-04 2:50:25.000 AM kernel: MAC Framework successfully initialized
13-01-04 2:50:25.000 AM kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
13-01-04 2:50:25.000 AM kernel: IOAPIC: Version 0x11 Vectors 64:87
13-01-04 2:50:25.000 AM kernel: ACPI: System State [S0 S3 S4 S5]
13-01-04 2:50:25.000 AM kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
13-01-04 2:50:25.000 AM kernel: [ PCI configuration begin ]
13-01-04 2:50:25.000 AM kernel: console relocated to 0xf10010000
13-01-04 2:50:25.000 AM kernel: PCI configuration changed (bridge=1 device=1 cardbus=0)
13-01-04 2:50:25.000 AM kernel: [ PCI configuration end, bridges 5 devices 24 ]
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
13-01-04 2:50:25.000 AM kernel: mbinit: done [64 MB total pool size, (42/21) split]
13-01-04 2:50:25.000 AM kernel: Pthread support ABORTS when sync kernel primitives misused
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagementClient: ready
13-01-04 2:50:25.000 AM kernel: BTCOEXIST off
13-01-04 2:50:25.000 AM kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
13-01-04 2:50:25.000 AM kernel: 5.106.198.19
13-01-04 2:50:25.000 AM kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID e80688fffec0e9d0; max speed s800.
13-01-04 2:50:25.000 AM kernel: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
13-01-04 2:50:25.000 AM kernel: com_seagate_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: com_maxtor_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: rooting via boot-uuid from /chosen: 1052015E-B101-3046-8932-5C6B1E6A7995
13-01-04 2:50:25.000 AM kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13-01-04 2:50:25.000 AM kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT256M4SSD2 Media/IOGUIDPartitionScheme/Imipenem (SSD)@2
13-01-04 2:50:25.000 AM kernel: BSD root: disk0s2, major 14, minor 2
13-01-04 2:50:25.000 AM kernel: Kernel is LP64
13-01-04 2:50:25.000 AM kernel: [IOBluetoothHCIController::setConfigState] calling registerService
13-01-04 2:50:25.133 AM com.apple.launchd: *** launchd[1] has started up. ***
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.987 AM UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
13-01-04 2:50:25.990 AM UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:26.000 AM kernel: BCM5701Enet: Ethernet address c4:2c:03:01:22:c1
13-01-04 2:50:26.000 AM kernel: AirPort_Brcm4331: Ethernet address f8:1e:df:eb:b4:37
13-01-04 2:50:26.000 AM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13-01-04 2:50:26.000 AM kernel: IO80211Interface::efiNVRAMPublished():
13-01-04 2:50:27.025 AM airportd: _processDLILEvent: en1 attached (down)
13-01-04 2:50:27.274 AM com.apple.SecurityServer: Session 100000 created
13-01-04 2:50:27.000 AM kernel: in func createVirtualInterface ifRole = 1
13-01-04 2:50:27.000 AM kernel: Created virtif 0xffffff800bdffa00 p2p0
13-01-04 2:50:27.349 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:27.607 AM com.apple.SecurityServer: Entering service
13-01-04 2:50:27.749 AM UserEventAgent: ServermgrdRegistration cannot load config data
13-01-04 2:50:27.779 AM UserEventAgent: get_backup_share_points no AFP
13-01-04 2:50:28.000 AM kernel: NVDANV50HAL loaded and registered.
13-01-04 2:50:28.000 AM kernel: Previous Shutdown Cause: 5
13-01-04 2:50:28.000 AM kernel: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
13-01-04 2:50:28.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-01-04 2:50:28.332 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.333 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.347 AM com.apple.pfctl: No ALTQ support in kernel
13-01-04 2:50:28.347 AM com.apple.pfctl: ALTQ related functions disabled
13-01-04 2:50:28.363 AM com.apple.launchd: (com.sec.faxdb[73]) posix_spawn("/Library/Printers/Samsung/Fax/FaxDB/faxdbd", ...): No such file or directory
13-01-04 2:50:28.385 AM com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb[73]) Exited with code: 1
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 300 seconds
13-01-04 2:50:28.606 AM mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
13-01-04 2:50:28.704 AM com.apple.revisiond: 2013-01-04 02:50 revisiond[52] (CarbonCore.framework) implementation_callback_rpc: ERROR: CFDictionaryGetValue(FSEvents_streamDict, cfPortNumber) => NULL
13-01-04 2:50:28.705 AM com.apple.usbmuxd: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13-01-04 2:50:28.814 AM configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
13-01-04 2:50:28.814 AM configd: DHCP en1: INIT-REBOOT transmit failed
13-01-04 2:50:28.837 AM systemkeychain: done file: /var/run/systemkeychaincheck.done
13-01-04 2:50:28.880 AM mds: (Normal) FMW: FMW 0 0
13-01-04 2:50:28.938 AM mDNSResponder: D2D_IPC: Loaded
13-01-04 2:50:28.938 AM mDNSResponder: D2DInitialize succeeded
13-01-04 2:50:28.990 AM configd: setting hostname to "Karr-Hong-Lees-MacBook-Pro.local"
13-01-04 2:50:29.000 AM kernel: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
13-01-04 2:50:29.000 AM kernel: DSMOS has arrived
13-01-04 2:50:29.000 AM kernel: macx_swapon SUCCESS
13-01-04 2:50:29.031 AM configd: network configuration changed.
13-01-04 2:50:29.984 AM loginwindow: Login Window Application Started
13-01-04 2:50:30.091 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 299 seconds
13-01-04 2:50:30.142 AM netbiosd: Unable to start NetBIOS name service:
13-01-04 2:50:31.000 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13-01-04 2:50:31.000 AM kernel: en1: 802.11d country code set to 'US'.
13-01-04 2:50:31.000 AM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13-01-04 2:50:31.282 AM loginwindow:
O3REQUIRE FAILED: ret == 0
   - file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
   - line: 91
13-01-04 2:50:31.282 AM loginwindow: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
13-01-04 2:50:31.315 AM com.apple.SecurityServer: Session 100004 created
13-01-04 2:50:31.317 AM loginwindow: Login Window Started Security Agent
13-01-04 2:50:31.347 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:32.000 AM kernel: MacAuthEvent en1   Auth result for: a8:39:44:57:2c:50 MAC AUTH succeeded
13-01-04 2:50:32.000 AM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-01-04 2:50:32.000 AM kernel: AirPort: Link Up on en1
13-01-04 2:50:32.000 AM kernel: en1: BSSID changed to a8:39:44:57:2c:50
13-01-04 2:50:32.530 AM airportd: _doAutoJoin: Already associated to “TELUS3939”. Bailing on auto-join.
13-01-04 2:50:33.000 AM kernel: AirPort: RSN handshake complete on en1
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:35.093 AM configd: network configuration changed.
13-01-04 2:50:35.113 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on TELUS3939 because it is protected and not on the exception list
13-01-04 2:50:35.116 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-01-04 2:50:35.118 AM configd: network configuration changed.
13-01-04 2:50:35.991 AM ntpd: proto: precision = 1.000 usec
13-01-04 2:50:37.270 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:43.282 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)

Fixed it!
Just changed my settings to auto log on.
Hooray!

My keyboard desapears every now and them with new batteries, and it takes some time to recover it

the keyboard stops working suddenly and the computer can´t find it for a while, in spite of the new batteries in the keyboard. after some time it returns and works again

Please read and use Apples Troubleshooting wireless mouse and keyboard issues article.

HT4859 i restarted my iphone and downloaded the new itunes and when my phone restored it backed up from back in april of last year how do i get it back to current settings?

Help

You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

I downloaded the new maverick and now i can't open iPhoto and can't install the new version. Help?

Iphoto has a circle with line through it. its iPhoto 9.2.3. I go to the app store and try and download the new version and i get these windows. if someone can help that would be great. also i had problems installing maverick I'm backing up my hard drive and going to try and reinstall maverick but i dont know what else to do i have all my daughters baby photos on there. is there anyway i can transfer my library to a different app and open it that way???

The error message means, that a different AppleID has been used to buy iPhoto '11 or to accept it to the AppleID, when the Mac first has been set up.
If you are now using a different AppleID then the one you used, when you set up your Mac, launch the App Store and sing into the AppStore with the old AppleID (in the "Store" menu).
If your Mac has been set up by someone else, ask this person to sign into the AppStore and update iPhoto for you. If you bought the Mac second hand and cannot contact the previous owner, delete iPhoto from the Applications folder and buy it using your AppleID.
If none of this applies, and you bought the Mac as new, and never used a different AppleID, contact the store that sold you the Mac. They may have sold you a refurbished Mac, with the iLife apps still tied to a different AppleID.

HT201364 Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machin

Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
Brian

Welcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718

I need help with my Iphone, Itunes, and new SSD and other SATA harddrive where old Itunes files are kept. I cannot sync up new albums I ripped to itunes.

I recently bought a new SSD and installed windows and all major files to it including Itunes. My old 500GB SATA harddrive is still connected and accessible to Itunes, but I cannot get any new album I download to Itunes to sync up with my 64 GB Iphone 5.
Please help me as I am going raving mad over this.
P

Follow the directions here:
https://discussions.apple.com/docs/DOC-3141

How can I transfer purchases I've made from one Apple ID to another so I can update and download my new music?

I had to get my own Apple ID after using my mom's for years. I can't update my apps now because they were downloaded on her ID. I have access to all settings on both accounts for now. How can I transfer them so I can update all my stuff and download the new music I bought on my new ID?

How about transferring total ownership of apple id?

I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had. I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had. I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

It has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to put everything back.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod/iphone/ipad: File>Transfer Purchases

HT201269 I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone I purchased 2 weeks ago when my Iphone was stolen. I don't know how to get the money or music on new phone?

Need help with Itunes transferrs and can I use my Edge phone as a router?

I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone.

HT4623 I was downloading the new IOS and message could not find Iphone - Now my mhone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again.

Slow Transfer and Downloads with new SSD and Fresh OS

Similar Messages

Maybe you are looking for