Small file size QT settings wanted

I'm trying to make fairly good quality, but small QT's for uploading to clients and for an iweb site.
A minute PAL video is around 693Mb as a standard QT export. By running thru' Sorenson Squeeze I can get it down to around 7Mb and still look OK. I'd ideally like to get it smaller and to stick to QT. Any good recipes out there????

Yeah if you can spare the framerate, that's the best way to drop the file size. I usually set keyframe frequency to automatic. More frequent keyframes mean a larger file, so if it can get away without using new keyframes for a while that'll help your file size as well. If you're video's got a lot of quick cuts you'll end up with a bigger file but the shots will look better.

Similar Messages

  • What's the best settings to Export movie for smaller file sizes?

    Hi, I've been working on some helmet cam footage which was taken with Xvidmpeg4.avi and was advised to convert it to dvavi for editing in PrE, this created a huge file to work with, the original footage was 206mb and the finished edited dvavi file is now 1.56gb, what settings can I use to export the movie with a much smaller file size, but hopefully try to retain some quality, to upload to places like Vimeo? I thought I would try to export it in the same as the original footage Xvidmpeg4.avi thinking this might compress it again to something like the 206mb of the original and the original was good quality footage, but PrE just hangs up with a box stating 'Xvid Status (Not Responding)' and when I try to cancel that the whole thing crashes and closes? So when I go to File > Export > Movie, what would be the best settings in:
    General > File Type ?
    Video > Compressor
    lots of options under compressor if I select the file type as Microsoft AVI, so I'm guessing something under that would compress it to a smaller file size but what, I could spend all night trying different settings so hoping for some advice?
    Or, if I'm completely in the wrong place for the settings and should be doing something else please tell me?
    Thanks, Gav

    Thanks for the replies, but to me it's still confusing - simply because there are so many settings, if I go to Share/Personal Computer I'm then presented with a whole load of settings
    NTSC Flash Video
    MPEG
    DVAVI
    Windows Media
    QuickTime
    and under each of those is a lot more advanced settings?
    I'm guessing I wouldn't use flash or quicktime, so which of the others would I use and what are the advanced settings to use as I can't find anything that is .wmv or .mov
    What I've done with other videos that I've exported from PrE as dvavi is then to put it through Windows Movie Maker, Publish Movie, This Computer, then put the settings to Windows Media DVD Quality (PAL) (3.0 Mps) - this seemed to be the only setting that reduced the file size considerably but still had good quality, but it's still about twice the original file size?
    This all seems long winded to me, open original file, convert original file, output another file, then output the file again in something else which then results in loss of quality and a larger file than the original? I'm ending up with lots of files, was hoping just to edit in Premiere then export/publish that edited clip and that would be it, then upload to the net.
    Is it not possible to just edit my original footage and save it, just like you would with something like a word document, should I be using something else and not Premiere?
    Thanks.

  • With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

    With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

    Gary Krouse
    We will customize a very detailed reply, but
    (a) What are the properties of your source media?
    (b) What did you or the program set as the project preset to match the properties of the source media?
    (c) What specific requirements do you have for this H.264.mov export file?
    File size can be a compromise between bitrate, file size, and quality.
    Thanks.
    ATR

  • Can i have a smaller file size for songs that i put on iphone vs mac

    i have ripped a lot of my cds  to itunes on my MBA. i used the aac high quality setting.
    is there a way that i can upload lower quality/smaller size versions of the songs that i will put on my new iphone ?
    Q2: once i rip cd into itunes (on my MBA)... is there an easy way I can  later decide to save space and re encode them at 128 instead of 256 (for example).
    i notice that you cant just willy nilly copy/delete from the itunes media folder because itunes doesnt seem to 'refresh' with the new files.
    thx!

    1. the ONLY place i see where you can set the sampling rate,etc  is under preferences/general/'when a cd is inserted"....    am i missing something?
    No.
    2. when i want to add an existing mp3 file (from outside the apple realm) , i am using itunes "add to library" and browsing to some mp3 file(s) . it doesnt give me a option to convert it to an m4a format... it seems to just add it to the itunes library without changing the mp3 file ....    do i have any option here?
    You don't need to convert formats and I would not recommend you do so. You will simply lose quality.
    To answer your original question...
    can i have a smaller file size for songs that i put on iphone vs mac
    If you want smaller files on the iPhone, see my post above which converts them when syncing to theiPhone.
    If you really want to convert when adding songs to iTunes...
    iTunes prefs > General - Import settings as you want.
    Hold Option (Mac) or Shift (Windows) and choose  File > Create New Version > Convert AAC (or what your settings are in previous step).
    This will convert and add the file instead of adding the file then converting and having 2 of the same song in iTunes.

  • How to export in a small file size in FCP7 ?

    Hi,
    I'm filming with a GoPro camera on 720p 60fps.
    resulting files are MP4 files wich I convert to Apple ProRes files.
    Now when I want to export my movie, it has a VERY big file size..!
    Can anyone tell me how to export my movie in a smaller file size.
    It doesn't has to be the smallest file size, just small enough so I can upload it on the internet etc.
    Thanks very much,
    Yannick.

    Export a reference video (command-E, current settings and "self-contained" should not be marked.
    Then import to compressor, use one of the h.264 settings... Start with the LAN setting and go from there.

  • Why Is "Export Small File Size" Large?

    Hi, I work in CS3.  Out of 100 brochures, I have two brochures that will not export to a small file size PDF. The settings for export are all the same.  What else should I be looking for?  The sizes are usually 1 MG.  These particular 2 brochures are 5 - 6 MG.  What can I look for to correct this?
    Thanks

    Small size is very dependent on the contents being exported to PDF. Images are readily compressed. Text and vector data isn't. Thus, if your content is primarily text and vector, it is very unlikely that the content can be compressed signficantly more via change of settings.
    Another factor that can relate to image compression is use of any duotones that use spot colors. Such images cannot be JPEG-compressed, only ZIP-compressed.
              - Dov

  • Small file size, but still high quality?

    Hello, I am filming weddings for clients but I am unable to export them with a small enough file size so that they are able to see it on their slower computer. And it is a pain when it doesn't even fit on a dvd. These videos are somewhere around 2 hours long. I would also like to have them still HD. The only way I have been slightly succesful is to upload them to youtube then download them off again. Is there a way to do this? I have already tried H.264.  Thank you for your time!

    Use the Adobe Media Encoder and h.264. It's currently your best option for small file size and HQ playback. You should also use AME to encode for DVD. 2 hours will easily fit on a DVD. If you want HD then burn a BluRay. That format will also hold a nicely compressed 2 hr movie. It's done all the time. You just have to learn about encoding for distribution. The standard presets are very good.

  • Ntsc to pal conversions with small file sizes

    I'm trying to convert a file from NTSC to PAL, which I have done successfully in the past. However, the file needs to be under 200MB (the video is 3.40) and I can not seem to get it any lower than 346 MB using the dv-pal setting and everything as low as possible and the sound set to mono. Any suggestions?
    Thanks,
    Christy

    DV PAL is a set data rate - 3.56 MB/s when run at 25 fps.
    If you want a smaller file size you have two choices -
    1. convert the file to another codec that allows for smaller frame sizes, slower frame rates and increased intra and inter frame compression.
    2. If it must be DV/PAL, cut the length of the video to reach your 200mb limit.
    Of course there is the third choice of simply giving them the larger file because that's what an un-compromised DV/PAL version of the file will be.
    x

  • Using compressor Small file sizes?????

    Can anyone help me with this. I get a lot of request from clients to have the video I edit for them compressed to very small files sizes so they can be emailed. At the same time the client complains about the quality of the video. I'm looking for some suggestions on how I can maximize quality but at the same time keep the file size low. Should I encode at MPEG-1 or MPEG-4 to do this? What about the other codecs, H.264 for example. Should I be making adjustments inside compressor to get low file size and better quality? What settings are those? Please help.

    Are you asking how to find the smallest files and sync those? Or are you asking how to make the big files smaller without making duplicates. If the former, you can sort your library by file size or make a smart playlist that looks for files below a certain size. If the later, you really can't. You'd have to downsample the tracks which would create a smaller copy.

  • Export Settings for best quality, smaller file size?

    I have a one hour movie I made of a concert and exported it using Share --> Media Browser --> 720p.  It came out great quality but it's 4.4gb's. 
    I need to figure out how to get that down to about 1GB while keeping 720p.  HD movies in iTunes are two plus hours and only 3gb's from what I've seen.  How can I use the same compression settings?  There has to be a way to compress it a little more, while staying in 720p right?
    What am I missing? TIA!

    Compression quality really depends on the type of video that you are trying to compress.  If the video is full of motion and noise, it will be very hard to reduce the file size through compression without massive loss.  Compression is a trade-off.  If you reduce the fame size to 480p, you may increase the quality of the video while reducing the file size versus trying to do the same thing at 720p.

  • Exporting a smaller file size

    I have a client who wants me to upload his 2 min acting reel to a web site that requires the reel to be 15 MB at the most. I have no idea how to get a video that small. It seems to me that the quality would be horrible, but that's what they're asking for. I have uploaded videos to youtube that requires under 100 MB that's no problem. The smallest video I could create from 2 min was about 50 MB. Does any who know how to get videos that small?
    Thank You
    Vince

    In the custom options area of the settings, the things that will make the difference are the keyframing and the "limit data rate" settings. I usually set my keyframes to about 1/2 my frame rate. I think this defaults to "none" which will greatly increase file size. The "limit data rate" setting will force the average data rate below a certain limit, which can help put a ceiling on the total file size. The final file will be a bit larger because of the audio data.
    If you are testing different settings, Compressor is great for this because you can save custom presets, and queue up a load of tests from a single source. I recommend testing with a 6-second piece, because you can multiply the result by 10 to figure the file size or encoding time per minute.
    Hope this helps -
    Max

  • Smaller File Sizes

    Ok so I had a HD 720p Movie which I made in Final Cut Pro, The video is 2 mins 45 seconds (ish) and has lots of Color editing and Motion editing and a bit of After Effects.
    I am Exporting it and it says 5 hours till it will be done :O
    How can I decrease this file size but maintain high quality.
    Any compressor tips or any app to download - It is being uploaded to zshare and I think it will be too big to upload :/
    Maybe when Exported, Open it in quicktime and save it as a smaller file?

    HD 720p...but what CODEC? HDV? XDCAM? DVCPRO HD?
    Did you fully render before you exported? If not, then FCP is rendering AS it exports, thus adding more time.
    What are you exporting AS? What codec? What size?
    Typically you fully render your sequence. Then export a self contained QT movie...using the sequence settings. Then take that result into COMPRESSOR and compress to the format you want. H.264 is a good choice.
    Shane

  • Exporting to PDF - How Can I Get A Small File Size When Using Lots of Vector Art?

    I am trying to create a small PDF file for e-book distribution purposes. My Indesign pages contain a variety of photographs, vector icons and vector maps.
    A publisher in Britain who does similar books on a Mac using Creative Suite was able to create a 22-page document very similar to mine (similar icons, graphics, density, etc) that is only 2.84 mb, a small fraction of the file size that I'm getting! I've included a sample page of his below, which is a low-res jpeg, but on the original PDF all of the text and images (except the jpeg cliff background) are super sharp - they look like vectors when you zoom in. I've also included screenshots of his PDF export settings.
    I don't know if he's exporting directly out of Indesign, but my best guess is that he is.
    My vector-based icons, numbers and maps are bloating my PDFs considerably. When I remove them, the Indesign and exported PDF file sizes drop dramatically. For the life of me, I can't figure out how he got such small PDF files sizes using so much vector art! The PDF graphic compression settings don't seem to include any options for vector art.
    My vector art graphics (numbering, icons, maps) are all saved as Illustrator AI files and then placed in Indesign as linked graphics. My best guess as to why I can't achieve smaller PDF files is I'm either doing something wrong with the vector graphics themselves or handling/exporting them improperly out of Indesign.
    I am using CS4 for PC and am on a Dell Machine running Windows 7.

    I am trying to create a small PDF file for e-book distribution purposes. My Indesign pages contain a variety of photographs, vector icons and vector maps.
    A publisher in Britain who does similar books on a Mac using Creative Suite was able to create a 22-page document very similar to mine (similar icons, graphics, density, etc) that is only 2.84 mb, a small fraction of the file size that I'm getting! I've included a sample page of his below, which is a low-res jpeg, but on the original PDF all of the text and images (except the jpeg cliff background) are super sharp - they look like vectors when you zoom in. I've also included screenshots of his PDF export settings.
    I don't know if he's exporting directly out of Indesign, but my best guess is that he is.
    My vector-based icons, numbers and maps are bloating my PDFs considerably. When I remove them, the Indesign and exported PDF file sizes drop dramatically. For the life of me, I can't figure out how he got such small PDF files sizes using so much vector art! The PDF graphic compression settings don't seem to include any options for vector art.
    My vector art graphics (numbering, icons, maps) are all saved as Illustrator AI files and then placed in Indesign as linked graphics. My best guess as to why I can't achieve smaller PDF files is I'm either doing something wrong with the vector graphics themselves or handling/exporting them improperly out of Indesign.
    I am using CS4 for PC and am on a Dell Machine running Windows 7.

  • What is the best seeting to export as smaller file size AVI from FCP?

    Hi, I know the topic sounds very similar to many of AVI post it had been up, however, somehow, I do not find the right answer that I'm looking for.
    I have a couple animation created from QT as "image sequence".
    I simply want to export as avi file.
    Here is the question I have.
    1. If I choose DV/DVCPRO-NTSC, and choose scan mode as Progressive, I get interlacing looking quality video.
    2. If I choose compressor type as "NONE" then even I set as "least" quality, the file size will be over 1G..although, that's the quality I'm trying to archive.
    Is there any other setting I can choose to get good quality with lower file size avi? I have seen or download avi file on the net with very good quality and still download-able file size...

    What is the QT method? (Export from QT Player?)
    Yes, 10 hour plus is ridiculous. I'm guessing that there was either something wrong with your Internet connection and/or at the You Tube end of the uploasd/compression process.
    Innocentius and Hugh are right; using Compressor (or MPEG Streamclip) and using YT's  uploader is the most reliable workflow.(Since Google changed the account verification process, there have been reports of upload problems using Share>You Tube.)  In addition, you have more control over the quality of your movie. You can create multiple custom settings in Compressor and then Share > Compressor custom settings. It will go faster if you export out of FCP as a Pro Res 422 file; should take 3-4 minutes top. The Web encode for a 3 minute video in Compressor might take 15 minutes, depending on your system. MPEG Streamclip is probably a little faster.
    Russ

  • Best way to get small file size/best quality- starting from Logic?

    I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
    So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
    I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
    If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
    Thank you...

    Hi,
    user5716448 wrote:
    ... Trying this
    REGEXP_SUBSTR ( 'cus_postcode'
    , '(\d+)\D*$'
    , 1
    , 1
    , NULL
    , 1
    'cus_postcode' (inside single-quotes) is the 12-character literal consisting of c, u, s, underscore, p, o, another s, t, another c, another o, d and e. It doesn't contain any digits.
    If you want to use a column called cus_postcode, then lose the single-qutoes.
    >
    where postcode for example DI19 1RI
    Would expect 1 - first number after space starting from right but getting blank.
    What am I doing wrong?
    Thanks

Maybe you are looking for