Smartform working fine in DEV and Quality But Problem in Production server

Hi
i had done a smartform ..that is working fine in devlopement and
quality server but the data in few of the column not appearing in production
server.i had debug it and found prolem in S0RT Syntax ..Had not faced this kind of problem before i had 20 records in my itab.
iam sorting it by vbeln and posnr ....
and deleting the adjacent duplicates ....comparing veln and posnr...
both are same ..in 20 records .
but iam fetching the adrees number at first in the loop.
so the first record of table is with adrs number...
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403 290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
if i sort the above table in devlopement and quality ..it will be in the same way
as above but in production it gets sorted in this way
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403 290644
and when i delete duplicate only i get
                                                   vbeln          posnr
a1       a2      a3            a4    a5     a6              a7              a8          a9
ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
in this where i dont get the adrs number so cant get adrs detail...
Can anyone theie tell me what is the problem with it ONLY IN PRODUCTION SERVER..
ITS WORKING FINE DEV AND QUALITY SERVER...
REGARDS....

are u using my DELETE keywords ?
if yes , then use
delete adjacent duplicates from itab comparing all fields.
Regards
Prabhu

Similar Messages

Home sharing is working fine for musics and videos but not for apps. What is wrong?

Home sharing is working fine for musics and videos but not for apps. What is wrong?

i had the same issue as everyone here after upgrading to itunes 10.x. vista could see xp home share. ipod touch could see xp home share.
neither could see vista home share.
after several hours of authorizing de-authorizing, rebooting router etc, i knew it had to be a firewall thingy with vista as xp was working fine
i went to this article http://support.apple.com/kb/ht2553 and followed the instructions. itunes was already in my vista exception list. on a hunch i deleted the itunes exception and followed the steps to add it again and boom it worked!! i could now see my vista machine from my ipod touch immediately.
something must have screwed up the firewall exception on the upgrade to itunes 10.x
it worked for me, i hope this helps others

免 Chaines Char not accepted in QA system, working fine in Dev and PROD

Hi Experts,
I am stuck withchines char e.g. 免
BW QA is not accepting it, I can see the PSA data 免 converted to #, where as same records show proper 免 in BW DEV and PROD.
I checked the data in source system (RSA3) properly showing 免.
I rechecked the SM59 RFC setting in QA and compare with DEV.
All system are unicode supported.
Please help to resolve.
Thank-You.
Regards,
VB

I crated a new flat file text datasource and tried to load data (chines char) and that to work in QA.
Don't understand what's issue with 0CUST_SALES_ATTR extractor. ?
Any help/experience is welcome.
Thank-You.
Regards,
VB

Links in PDF created by MS Access work fine in Chrome and Foxit, but seem corrupted in Adobe Reader XI

I am using version 11.0.09.29 of Reader which I understand to be the latest, and version 6.1.4.0217 of Foxit.
The document is Dropbox - D00769 Parish Register Reconstructed.pdf and I have created this with an MS Access repoort exported as PDF to Dropbox.
If I download this and open in Foxit and click on the first camera icon on page 1 I am taken to the correct URL with no problem http://hcnhistory.org.uk/PDC/showJboximages.php/?T=HcN%20Parish%20Register%20of%20marriage s%201837-1963&S=600&X=D00769&N… (Note that the full URL is correct and ends N=7, but this forum has shortened what is shown here with an ellipsis.)
Similarly clicking on the second camera icon on page 1 also correctly takes me to http://hcnhistory.org.uk/PDC/showJboximages.php/?T=HcN%20Parish%20Register%20of%20marriage s%201837-1963&S=600&X=D00769&N…
All the links behind all the other camera icons are also correct in Foxit (and incidentally in Chrome).
If I open the same document in Reader and click on the first camera icon I am taken to http://hcnhistory.org.uk/PDC/showJboximages.php/?T=HcN%20Parish%20Register%25On - which is not correct and comes up with an error (a).
Interestingly the second camera icon in Reader takes me to http://hcnhisotonr/ which is very wrong, as does every other camera icon on the same page (b).
It seems that in Reader the first link on each page is as at (a) above, and every other link is as (b) above.
There is no problem with the link in the footer of each page.
I have checked on the forum entries that might have helped (e.g. https://forums.adobe.com/thread/1133628) but these seem to be about %20 being encoded as %2520 thereby causing errors, and were solved with a new version of Reader last year. It looks like mine may be a similar but not identical issue.
Any ideas what is going on?
Thanks

There's something very strange going on with this file. It doesn't actually contain any links (except for in the footer), but the URLs in transparent text located behind the camera icon and the first line of each item.
So if you have the option set to create links from URLs then Acroabt/Reader will recognize that text and convert it into a clickable link...
There are many problems with that, mainly that the URL text overlaps with the actual text of the document. So if you copy the first lines of the first page, it looks like this:
HcN Parish Register of marriages 1837-1963
Page 1
http://hcnhistory.org.uk/PDC/showJboximages.php/?T=HcN%20Parish%20Register%On 19 Sep 1837 John Munns (Labourer; aged 19 Years; signed) of 2H0oolfy%w2e0mll wararisa gMesa%rr2i0e1d8 b3y7 -H19u6g3h& FSo=r6d0 0B&aXc=oDn0 b0y7 6B9a&nNn=s7 t&oN A=
Sophia Mann (of Full age; signed) of Holywell
As you can see, the URL string is cut in the middle by the actual text, and is therefore broken when clicked (it happens in the forum system as well, just the same).
Other problems are that it screws up the text, and also that it won't work at all if the setting mentioned above is disabled.
If possible, I would recommend abandoning this weird system altogether and sticking with creating actual Link objects, like you did in the footer.
That is a much more reliable and consistent method of inserting clickable web-links into your file.

My Webpage works fine in Dreamweaver/Firefox & Safari but will not work correctly in IE. Help Please

Hi,
I uploaded my page from Dreamweaver yesterday and it works fine in Firefox and Safari, but when i opened it on Internet explorer, the bottom tables have moved and the image links at the top have a white boarder around.
Webpage link: http://www.gs-designproject.co.uk/home.html
any help greatly appreciated.
Thanks,
Gav

The white borders around your images are created because they're embedded in links. Add the following to your style sheet:
a img {
border: none;
The problem with the table row at the bottom is this:
<td colspan="760px" height="40" valign"middle"="">
The colspan attribute takes the number of columns that you're spanning, not a number of pixels. Judging from the rest of the table, it should be colspan="7".

Javascript Error in Firefox that works fine in Chrome and IE

The source found by clicking on "More System details" to the right works fine for IE and Chrome but causes a Javascript error in Firefox, as follows:
Error: CurrentRoleId_OnChange is not defined
Source File: Line: 152

-> Update Firefox to the latest version 10.0.1
* [[Installing Firefox on Windows]]
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[JavaScript]]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

ITunes was working fine a few weeks ago but now when i try and load it I get the message "This version of iTunes has not been correctly localised for this language. Please run the English version."

I suddenly cannot open my iTunes. Was working fine a few weeks ago but now a message comes up asking me to use the English version. (I am using Windows 8)

Hey MichelleOland,
Thanks for the question. I understand that you are experiencing issues opening iTunes for Windows. Let’s try completely removing iTunes and all related components and then re-installing from Apple’s website:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
http://support.apple.com/en-us/HT1923
Additional information:
If you can't install or update iTunes for Windows - Apple Support
http://support.apple.com/en-us/HT201668
Thanks,
Matt M.

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
I hope there is a fix for this, cause it *****!!!!

I am renewed my cc subscription yesterday, and it works fine on my main computer, But my Second computer is telling me I need to renew my subscription, But when I go to the Adobe applications manager, my subscription isn't showing. Any idea how I can acti

I renewed my cc subscription yesterday, and it works fine on my main computer, But my Second computer is telling me I need to renew my subscription, But when I go to the Adobe applications manager, my subscription isn't showing. Any idea how I can activate my subscription on a second computer?

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

Macbook pro has wifi connected but won't open internet - says computer offline - works fine on ethernet and other pc's

Any ideas on how to resolve this issue - wifi is connected but the web browser won't open - gives message that computer is offline. It works fine on ethernet and also on other computers in house. no other modem or devices in home.
computer one year old.

He advised me to 'back up' everything and 'reformat' the computer.
I have been looking at how to do these tasks - not 100% on both.
The quickest way to do this is to create a clone copy of your existing internal Macintosh HD. You can create this copy using applications like Data Backup, Carbon Copy Cloner, or SuperDuper!.
I use an external USB HDD for the clone copies.
The following AppleInsider article will give you an idea on how to use Carbon Copy Cloner to make a clone backup of your Mac's hard drive.

Smartform working fine in DEV and Quality But Problem in Production server

Similar Messages

Maybe you are looking for